Message ID | 1563262978-6855-1-git-send-email-jun.nie@linaro.org |
---|---|
Headers | show |
Series | Support distro boot in pico-imx7d BL33 case | expand |
Jun Nie <jun.nie@linaro.org> 于2019年7月16日周二 下午3:43写道: > > Support distro boot in pico-imx7d BL33 case with changing the enviroment > variables. While the other two patches are for polishing clock code and > for feature enablement. > Hi, any comments? Thanks! Jun
Jun Nie <jun.nie@linaro.org> 于2019年7月16日周二 下午3:43写道: > > Support distro boot in pico-imx7d BL33 case with changing the enviroment > variables. While the other two patches are for polishing clock code and > for feature enablement. > > Jun Nie (3): > pico-imx7d: add config to enable CAAM > pico-imx7d: Support distro boot for FIT image case > pico-imx7d: polish uart clock id definition > > arch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- > configs/pico-imx7d_bl33_defconfig | 1 + > include/configs/pico-imx7d.h | 37 +++++++++++------------------------ > 3 files changed, 13 insertions(+), 43 deletions(-) > > -- Hi Vanessa, Do you have any comments on these 3 patches? Or we can merge it now? Thanks! Best Regards Jun
Jun Nie <jun.nie@linaro.org> 于2019年8月8日周四 下午12:04写道: > > Jun Nie <jun.nie@linaro.org> 于2019年7月16日周二 下午3:43写道: > > > > Support distro boot in pico-imx7d BL33 case with changing the enviroment > > variables. While the other two patches are for polishing clock code and > > for feature enablement. > > > > Jun Nie (3): > > pico-imx7d: add config to enable CAAM > > pico-imx7d: Support distro boot for FIT image case > > pico-imx7d: polish uart clock id definition > > > > arch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- > > configs/pico-imx7d_bl33_defconfig | 1 + > > include/configs/pico-imx7d.h | 37 +++++++++++------------------------ > > 3 files changed, 13 insertions(+), 43 deletions(-) > > > > -- > > Hi Vanessa, > > Do you have any comments on these 3 patches? Or we can merge it now? Thanks! > > Best Regards > Jun Hi, Does anyone has comments on these patches? Maybe we can merge them as no comments for a long time. Thanks! Regards, Jun
Hi Jun, > Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 case > > Jun Nie <jun.nie@linaro.org> 于2019年8月8日周四 下午12:04写道: > > > > Jun Nie <jun.nie@linaro.org> 于2019年7月16日周二 下午3:43写道: > > > > > > Support distro boot in pico-imx7d BL33 case with changing the > > > enviroment variables. While the other two patches are for polishing > > > clock code and for feature enablement. > > > > > > Jun Nie (3): > > > pico-imx7d: add config to enable CAAM > > > pico-imx7d: Support distro boot for FIT image case > > > pico-imx7d: polish uart clock id definition > > > > > > arch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- > > > configs/pico-imx7d_bl33_defconfig | 1 + > > > include/configs/pico-imx7d.h | 37 > +++++++++++------------------------ > > > 3 files changed, 13 insertions(+), 43 deletions(-) > > > > > > -- > > > > Hi Vanessa, > > > > Do you have any comments on these 3 patches? Or we can merge it now? > Thanks! > > > > Best Regards > > Jun > > Hi, > > Does anyone has comments on these patches? Maybe we can merge them as > no comments for a long time. Thanks! I could merge this patchset into nxp-imx and send pull request to Stefano, if you are fine with that. Regards, Peng. > > Regards, > Jun
Peng Fan <peng.fan@nxp.com> 于2019年9月3日周二 上午9:39写道: > > Hi Jun, > > > Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 case > > > > Jun Nie <jun.nie@linaro.org> 于2019年8月8日周四 下午12:04写道: > > > > > > Jun Nie <jun.nie@linaro.org> 于2019年7月16日周二 下午3:43写道: > > > > > > > > Support distro boot in pico-imx7d BL33 case with changing the > > > > enviroment variables. While the other two patches are for polishing > > > > clock code and for feature enablement. > > > > > > > > Jun Nie (3): > > > > pico-imx7d: add config to enable CAAM > > > > pico-imx7d: Support distro boot for FIT image case > > > > pico-imx7d: polish uart clock id definition > > > > > > > > arch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- > > > > configs/pico-imx7d_bl33_defconfig | 1 + > > > > include/configs/pico-imx7d.h | 37 > > +++++++++++------------------------ > > > > 3 files changed, 13 insertions(+), 43 deletions(-) > > > > > > > > -- > > > > > > Hi Vanessa, > > > > > > Do you have any comments on these 3 patches? Or we can merge it now? > > Thanks! > > > > > > Best Regards > > > Jun > > > > Hi, > > > > Does anyone has comments on these patches? Maybe we can merge them as > > no comments for a long time. Thanks! > > I could merge this patchset into nxp-imx and send pull request to Stefano, if you > are fine with that. > > Regards, > Peng. Hi Peng, I am fine. Thank you! Jun > > > > > Regards, > > Jun
Peng Fan <peng.fan@nxp.com> 于2019年9月3日周二 上午9:39写道: > > Hi Jun, > > > Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 case > > > > Jun Nie <jun.nie@linaro.org> 于2019年8月8日周四 下午12:04写道: > > > > > > Jun Nie <jun.nie@linaro.org> 于2019年7月16日周二 下午3:43写道: > > > > > > > > Support distro boot in pico-imx7d BL33 case with changing the > > > > enviroment variables. While the other two patches are for polishing > > > > clock code and for feature enablement. > > > > > > > > Jun Nie (3): > > > > pico-imx7d: add config to enable CAAM > > > > pico-imx7d: Support distro boot for FIT image case > > > > pico-imx7d: polish uart clock id definition > > > > > > > > arch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- > > > > configs/pico-imx7d_bl33_defconfig | 1 + > > > > include/configs/pico-imx7d.h | 37 > > +++++++++++------------------------ > > > > 3 files changed, 13 insertions(+), 43 deletions(-) > > > > > > > > -- > > > > > > Hi Vanessa, > > > > > > Do you have any comments on these 3 patches? Or we can merge it now? > > Thanks! > > > > > > Best Regards > > > Jun > > > > Hi, > > > > Does anyone has comments on these patches? Maybe we can merge them as > > no comments for a long time. Thanks! > > I could merge this patchset into nxp-imx and send pull request to Stefano, if you > are fine with that. > > Regards, > Peng. Peng, It is appreciated to help on this. Any comments from Stefan? Thanks! Regards, Jun > > > > > Regards, > > Jun
> -----Original Message----- > From: Jun Nie <jun.nie@linaro.org> > Sent: 2019年9月9日 21:47 > To: Peng Fan <peng.fan@nxp.com> > Cc: Stefano Babic <sbabic@denx.de>; Fabio Estevam <festevam@gmail.com>; > Otavio Salvador <otavio@ossystems.com.br>; Vanessa Maegima > <vanessa.maegima@nxp.com>; Bryan O'Donoghue > <bryan.odonoghue@linaro.org>; U-Boot Mailing List <u-boot@lists.denx.de> > Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 case > > Peng Fan <peng.fan@nxp.com> 于2019年9月3日周二 上午9:39写道: > > > > Hi Jun, > > > > > Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 case > > > > > > Jun Nie <jun.nie@linaro.org> 于2019年8月8日周四 下午12:04写道: > > > > > > > > Jun Nie <jun.nie@linaro.org> 于2019年7月16日周二 下午3:43写 > 道: > > > > > > > > > > Support distro boot in pico-imx7d BL33 case with changing the > > > > > enviroment variables. While the other two patches are for > > > > > polishing clock code and for feature enablement. > > > > > > > > > > Jun Nie (3): > > > > > pico-imx7d: add config to enable CAAM > > > > > pico-imx7d: Support distro boot for FIT image case > > > > > pico-imx7d: polish uart clock id definition > > > > > > > > > > arch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- > > > > > configs/pico-imx7d_bl33_defconfig | 1 + > > > > > include/configs/pico-imx7d.h | 37 > > > +++++++++++------------------------ > > > > > 3 files changed, 13 insertions(+), 43 deletions(-) > > > > > > > > > > -- > > > > > > > > Hi Vanessa, > > > > > > > > Do you have any comments on these 3 patches? Or we can merge it > now? > > > Thanks! > > > > > > > > Best Regards > > > > Jun > > > > > > Hi, > > > > > > Does anyone has comments on these patches? Maybe we can merge them > > > as no comments for a long time. Thanks! > > > > I could merge this patchset into nxp-imx and send pull request to > > Stefano, if you are fine with that. > > > > Regards, > > Peng. > > Peng, > > It is appreciated to help on this. Any comments from Stefan? Thanks! CI build failed: https://travis-ci.org/MrVan/u-boot/jobs/583445551 I need drop your patchset. Thanks, Peng. > > Regards, > Jun > > > > > > > > Regards, > > > Jun
Peng Fan <peng.fan@nxp.com> 于2019年9月11日周三 下午2:02写道: > > > > > -----Original Message----- > > From: Jun Nie <jun.nie@linaro.org> > > Sent: 2019年9月9日 21:47 > > To: Peng Fan <peng.fan@nxp.com> > > Cc: Stefano Babic <sbabic@denx.de>; Fabio Estevam <festevam@gmail.com>; > > Otavio Salvador <otavio@ossystems.com.br>; Vanessa Maegima > > <vanessa.maegima@nxp.com>; Bryan O'Donoghue > > <bryan.odonoghue@linaro.org>; U-Boot Mailing List <u-boot@lists.denx.de> > > Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 case > > > > Peng Fan <peng.fan@nxp.com> 于2019年9月3日周二 上午9:39写道: > > > > > > Hi Jun, > > > > > > > Subject: Re: [PATCH 0/3] Support distro boot in pico-imx7d BL33 case > > > > > > > > Jun Nie <jun.nie@linaro.org> 于2019年8月8日周四 下午12:04写道: > > > > > > > > > > Jun Nie <jun.nie@linaro.org> 于2019年7月16日周二 下午3:43写 > > 道: > > > > > > > > > > > > Support distro boot in pico-imx7d BL33 case with changing the > > > > > > enviroment variables. While the other two patches are for > > > > > > polishing clock code and for feature enablement. > > > > > > > > > > > > Jun Nie (3): > > > > > > pico-imx7d: add config to enable CAAM > > > > > > pico-imx7d: Support distro boot for FIT image case > > > > > > pico-imx7d: polish uart clock id definition > > > > > > > > > > > > arch/arm/include/asm/arch-mx7/clock.h | 18 +---------------- > > > > > > configs/pico-imx7d_bl33_defconfig | 1 + > > > > > > include/configs/pico-imx7d.h | 37 > > > > +++++++++++------------------------ > > > > > > 3 files changed, 13 insertions(+), 43 deletions(-) > > > > > > > > > > > > -- > > > > > > > > > > Hi Vanessa, > > > > > > > > > > Do you have any comments on these 3 patches? Or we can merge it > > now? > > > > Thanks! > > > > > > > > > > Best Regards > > > > > Jun > > > > > > > > Hi, > > > > > > > > Does anyone has comments on these patches? Maybe we can merge them > > > > as no comments for a long time. Thanks! > > > > > > I could merge this patchset into nxp-imx and send pull request to > > > Stefano, if you are fine with that. > > > > > > Regards, > > > Peng. > > > > Peng, > > > > It is appreciated to help on this. Any comments from Stefan? Thanks! > > CI build failed: > https://travis-ci.org/MrVan/u-boot/jobs/583445551 > I need drop your patchset. > > Thanks, > Peng. Thanks for the result. Can you help to only drop the patch for polishing clock? The three patches are not tightly coupled actually. Regards, Jun > > > > > Regards, > > Jun > > > > > > > > > > > Regards, > > > > Jun