Message ID | faea1168294963b9517dae762d18e455409e26a7.1564384345.git.baruch@tkos.co.il |
---|---|
State | Superseded |
Delegated to: | Stefan Roese |
Headers | show |
Series | [U-Boot,v2,1/3] spl: mmc: support uboot image offset on main partition | expand |
On 29.07.19 09:12, Baruch Siach wrote: > SPL now automatically selects the correct U-Boot image offset for both > eMMC and SD card. No need to tweak > CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR anymore. > > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > --- > board/solidrun/clearfog/README | 6 ------ > 1 file changed, 6 deletions(-) > > diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README > index 6171ce66f4f8..9375be84957a 100644 > --- a/board/solidrun/clearfog/README > +++ b/board/solidrun/clearfog/README > @@ -20,12 +20,6 @@ of "/dev/sdX" here! > Install U-Boot on eMMC: > ----------------------- > > -The ROM loads the bootloader from eMMC first boot partition at offset 0. This > -is unlike load from SD card that is at offset 512. As a result, the offset of > -the main U-Boot image on the eMMC boot partition changes. Set > -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x140 for SPL to load U-Boot from > -the correct location. > - > To make SPL load the main U-Boot image from the eMMC boot partition enable > eMMC boot acknowledgement and boot partition with the following U-Boot > command: Reviewed-by: Stefan Roese <sr@denx.de> Thanks, Stefan
diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README index 6171ce66f4f8..9375be84957a 100644 --- a/board/solidrun/clearfog/README +++ b/board/solidrun/clearfog/README @@ -20,12 +20,6 @@ of "/dev/sdX" here! Install U-Boot on eMMC: ----------------------- -The ROM loads the bootloader from eMMC first boot partition at offset 0. This -is unlike load from SD card that is at offset 512. As a result, the offset of -the main U-Boot image on the eMMC boot partition changes. Set -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x140 for SPL to load U-Boot from -the correct location. - To make SPL load the main U-Boot image from the eMMC boot partition enable eMMC boot acknowledgement and boot partition with the following U-Boot command:
SPL now automatically selects the correct U-Boot image offset for both eMMC and SD card. No need to tweak CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR anymore. Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- board/solidrun/clearfog/README | 6 ------ 1 file changed, 6 deletions(-)