Message ID | 20190722172635.4535-1-wsa+renesas@sang-engineering.com |
---|---|
State | Accepted |
Delegated to: | David Miller |
Headers | show |
Series | net: sfc: falcon: convert to i2c_new_dummy_device | expand |
From: Wolfram Sang <wsa+renesas@sang-engineering.com> Date: Mon, 22 Jul 2019 19:26:35 +0200 > Move from i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an > ERRPTR which we use in error handling. > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Solarflare folks, please review/test. Thank you.
On 24/07/2019 23:47, David Miller wrote: > From: Wolfram Sang <wsa+renesas@sang-engineering.com> > Date: Mon, 22 Jul 2019 19:26:35 +0200 > >> Move from i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an >> ERRPTR which we use in error handling. >> >> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Subject & description are incomplete, you're also changing i2c_new_device() to i2c_new_client_device(). Other than that, Acked-by: Edward Cree <ecree@solarflare.com> > Solarflare folks, please review/test. > > Thank you. Falcon isn't likely to get tested by us, I think we only have about three of them left in the building, two of which are in display cabinets ;-) We end-of-lifed this hardware a couple of years ago, maybe it should be downgraded from 'supported' to 'odd fixes'. Or even moved to staging, like that qlogic driver recently was.
From: Wolfram Sang <wsa+renesas@sang-engineering.com> Date: Mon, 22 Jul 2019 19:26:35 +0200 > Move from i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an > ERRPTR which we use in error handling. > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Applied.
> >> Move from i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an > >> ERRPTR which we use in error handling. > >> > >> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > > Subject & description are incomplete, you're also changing i2c_new_device() > to i2c_new_client_device(). Right, this was an anomaly with this patch to have both code paths returning an ERRPTR. The big conversion for i2c_new_device will come later in a seperate series. > Other than that, > Acked-by: Edward Cree <ecree@solarflare.com> Thanks!
diff --git a/drivers/net/ethernet/sfc/falcon/falcon_boards.c b/drivers/net/ethernet/sfc/falcon/falcon_boards.c index 839189dab98e..189ce9b9dfa7 100644 --- a/drivers/net/ethernet/sfc/falcon/falcon_boards.c +++ b/drivers/net/ethernet/sfc/falcon/falcon_boards.c @@ -454,13 +454,13 @@ static int sfe4001_init(struct ef4_nic *efx) #if IS_ENABLED(CONFIG_SENSORS_LM90) board->hwmon_client = - i2c_new_device(&board->i2c_adap, &sfe4001_hwmon_info); + i2c_new_client_device(&board->i2c_adap, &sfe4001_hwmon_info); #else board->hwmon_client = - i2c_new_dummy(&board->i2c_adap, sfe4001_hwmon_info.addr); + i2c_new_dummy_device(&board->i2c_adap, sfe4001_hwmon_info.addr); #endif - if (!board->hwmon_client) - return -EIO; + if (IS_ERR(board->hwmon_client)) + return PTR_ERR(board->hwmon_client); /* Raise board/PHY high limit from 85 to 90 degrees Celsius */ rc = i2c_smbus_write_byte_data(board->hwmon_client, @@ -468,9 +468,9 @@ static int sfe4001_init(struct ef4_nic *efx) if (rc) goto fail_hwmon; - board->ioexp_client = i2c_new_dummy(&board->i2c_adap, PCA9539); - if (!board->ioexp_client) { - rc = -EIO; + board->ioexp_client = i2c_new_dummy_device(&board->i2c_adap, PCA9539); + if (IS_ERR(board->ioexp_client)) { + rc = PTR_ERR(board->ioexp_client); goto fail_hwmon; }
Move from i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an ERRPTR which we use in error handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- Only build tested. Part of a tree-wide move to deprecate i2c_new_dummy(). drivers/net/ethernet/sfc/falcon/falcon_boards.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)