Message ID | 20190621034230.8639-1-yangbo.lu@nxp.com |
---|---|
Headers | show |
Series | Split fsl_esdhc driver for i.MX | expand |
Hi Y.b, Stefano, > Subject: [v8, 0/5] Split fsl_esdhc driver for i.MX It has been long time since V1, and there might be more conflicts when new defconfig changes. So I have picked up this patchset to https://github.com/MrVan/u-boot/releases/tag/mmc-6-23 and will send pull request soon. My gitlab account not ready, so still use github. Regards, Peng. > > -- > 2.7.4
On 6/24/19 7:28 AM, Peng Fan wrote: > Hi Y.b, Stefano, > >> Subject: [v8, 0/5] Split fsl_esdhc driver for i.MX > > It has been long time since V1, and there might be more > conflicts when new defconfig changes. So > I have picked up this patchset to > https://github.com/MrVan/u-boot/releases/tag/mmc-6-23 > and will send pull request soon. > My gitlab account not ready, so still use github. That's for -next , right ?
> Subject: Re: [v8, 0/5] Split fsl_esdhc driver for i.MX > > On 6/24/19 7:28 AM, Peng Fan wrote: > > Hi Y.b, Stefano, > > > >> Subject: [v8, 0/5] Split fsl_esdhc driver for i.MX > > > > It has been long time since V1, and there might be more conflicts when > > new defconfig changes. So I have picked up this patchset to > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > > > ub.com%2FMrVan%2Fu-boot%2Freleases%2Ftag%2Fmmc-6-23&data=0 > 2%7C01%7 > > > Cpeng.fan%40nxp.com%7C54029d738be5448975ee08d6f88bc8b8%7C686ea > 1d3bc2b4 > > > c6fa92cd99c5c301635%7C0%7C1%7C636969676592345179&sdata=Uf > 2As%2B0ix > > 0NTGJA1nc66WDcx%2BYip0nkt1jK%2B7O8Eo6Y%3D&reserved=0 > > and will send pull request soon. > > My gitlab account not ready, so still use github. > > That's for -next , right ? I prefer this go in this release, it is long time since v1 out and there are several R-b A-b tags got. Just sent pull request to Tom a few hours ago. Regards, Peng > > -- > Best regards, > Marek Vasut
On 6/25/19 7:38 AM, Peng Fan wrote: >> Subject: Re: [v8, 0/5] Split fsl_esdhc driver for i.MX >> >> On 6/24/19 7:28 AM, Peng Fan wrote: >>> Hi Y.b, Stefano, >>> >>>> Subject: [v8, 0/5] Split fsl_esdhc driver for i.MX >>> >>> It has been long time since V1, and there might be more conflicts when >>> new defconfig changes. So I have picked up this patchset to >>> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith >>> >> ub.com%2FMrVan%2Fu-boot%2Freleases%2Ftag%2Fmmc-6-23&data=0 >> 2%7C01%7 >>> >> Cpeng.fan%40nxp.com%7C54029d738be5448975ee08d6f88bc8b8%7C686ea >> 1d3bc2b4 >>> >> c6fa92cd99c5c301635%7C0%7C1%7C636969676592345179&sdata=Uf >> 2As%2B0ix >>> 0NTGJA1nc66WDcx%2BYip0nkt1jK%2B7O8Eo6Y%3D&reserved=0 >>> and will send pull request soon. >>> My gitlab account not ready, so still use github. >> >> That's for -next , right ? > > I prefer this go in this release, it is long time since v1 out and there > are several R-b A-b tags got. > Just sent pull request to Tom a few hours ago. I don't think there's enough time to test this, it's RC4 already, so critical fixes only. That was the whole point of extending the cycle by another month.
Hi everybody, On 25/06/19 13:59, Marek Vasut wrote: > On 6/25/19 7:38 AM, Peng Fan wrote: >>> Subject: Re: [v8, 0/5] Split fsl_esdhc driver for i.MX >>> >>> On 6/24/19 7:28 AM, Peng Fan wrote: >>>> Hi Y.b, Stefano, >>>> >>>>> Subject: [v8, 0/5] Split fsl_esdhc driver for i.MX >>>> >>>> It has been long time since V1, and there might be more conflicts when >>>> new defconfig changes. So I have picked up this patchset to >>>> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith >>>> >>> ub.com%2FMrVan%2Fu-boot%2Freleases%2Ftag%2Fmmc-6-23&data=0 >>> 2%7C01%7 >>>> >>> Cpeng.fan%40nxp.com%7C54029d738be5448975ee08d6f88bc8b8%7C686ea >>> 1d3bc2b4 >>>> >>> c6fa92cd99c5c301635%7C0%7C1%7C636969676592345179&sdata=Uf >>> 2As%2B0ix >>>> 0NTGJA1nc66WDcx%2BYip0nkt1jK%2B7O8Eo6Y%3D&reserved=0 >>>> and will send pull request soon. >>>> My gitlab account not ready, so still use github. >>> >>> That's for -next , right ? >> >> I prefer this go in this release, it is long time since v1 out and there >> are several R-b A-b tags got. >> Just sent pull request to Tom a few hours ago. > > I don't think there's enough time to test this, it's RC4 already, so > critical fixes only. That was the whole point of extending the cycle > by another month. I agree with Marek - I am not pushing new things (even last DM conversion) to current release. I will just pick up some fixes, and I am starting to feed the -next branch of u-boot-imx. Regards, Stefano
On Thu, Jun 20, 2019 at 10:41 PM Yangbo Lu <yangbo.lu@nxp.com> wrote: > > The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX > initially. The later QoriQ series PowerPC processors (which were > evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and > i.MX series processors were using this driver for their eSDHCs too. > > For the two series processors, the eSDHCs are becoming more and > more different. We should have split it into two drivers, like them > (sdhci-of-esdhc.c/sdhci-esdhc-imx.c) in linux kernel. > > It's ideal to keep common part for reusing. However, it's hard to > find out a little which could be reused. The truth is there will > be more and more different registers, bits and operatiing processes. > Even some code is common now, it may have to be split in the future. > So let's just split is as two drivers. > > Patch #2 just created a fsl_esdhc_imx driver which was a copy > of fsl_esdhc driver for i.MX processors. > Patch #3 converted i.MX platforms to use fsl_esdhc_imx. > Patch #4 and #5 just dropped useless code for the two driver. > There are still many cleaning up works needed to be done in the future, > because the eSDHC driver is mess for a long time. > Since I'm only owner for QorIQ eSDHC driver, I dropped only a little > things which I'm sure for fsl_esdhc_imx. Let i.MX eSDHC owner do futhur > cleaning up. > > Travis-CI build: https://travis-ci.org/yangbolu1991/u-boot-test/builds/548024197 > > --- > Changes for v6: > - Rebased. > - Applied to two new i.MX boards phycore_pcl063_ull/pico-imx7d_bl33. > Changes for v7: > - Rebased on https://gitlab.denx.de/u-boot/u-boot.git. > - Added Reviewed-by. > Changes for v8: > - Moved CONFIG_FSL_ESDHC into defconfig for colibri-imx8x/ls1028a/apalis-imx8 > platforms introduced recently. > - Applied eSDHC i.MX driver to colibri-imx8x/apalis-imx8 platforms. > I applied the series manually, but it didn't apply cleanly against 'master' However, after applying the series: Tested-by: Adam Ford <aford173@gmail.com> #imx6q_logic > Yangbo Lu (5): > Move CONFIG_FSL_ESDHC to defconfig > mmc: split fsl_esdhc driver for i.MX > Convert to use fsl_esdhc_imx for i.MX platforms > mmc: fsl_esdhc: drop i.MX code > mmc: fsl_esdhc_imx: drop useless code > > arch/arm/cpu/arm1136/mx35/generic.c | 10 +- > arch/arm/cpu/arm926ejs/mx25/generic.c | 8 +- > arch/arm/cpu/armv7/vf610/generic.c | 10 +- > arch/arm/cpu/armv8/s32v234/generic.c | 2 +- > arch/arm/include/asm/global_data.h | 2 +- > arch/arm/mach-imx/cpu.c | 6 +- > arch/arm/mach-imx/mx6/litesom.c | 4 +- > arch/arm/mach-imx/mx7/clock.c | 4 +- > arch/arm/mach-imx/mx7ulp/clock.c | 2 +- > arch/arm/mach-imx/speed.c | 4 +- > arch/m68k/cpu/mcf5445x/cpu_init.c | 2 +- > board/advantech/dms-ba16/dms-ba16.c | 4 +- > board/aristainetos/aristainetos-v1.c | 2 +- > board/aristainetos/aristainetos-v2.c | 2 +- > board/aristainetos/aristainetos.c | 4 +- > board/bachmann/ot1200/ot1200.c | 2 +- > board/barco/platinum/platinum.c | 2 +- > board/barco/titanium/titanium.c | 4 +- > board/boundary/nitrogen6x/nitrogen6x.c | 4 +- > board/ccv/xpress/xpress.c | 2 +- > board/compulab/cl-som-imx7/cl-som-imx7.c | 6 +- > board/compulab/cl-som-imx7/common.c | 6 +- > board/compulab/cl-som-imx7/common.h | 8 +- > board/compulab/cl-som-imx7/mux.c | 8 +- > board/compulab/cl-som-imx7/spl.c | 6 +- > board/compulab/cm_fx6/cm_fx6.c | 4 +- > board/compulab/cm_fx6/common.c | 4 +- > board/compulab/cm_fx6/spl.c | 2 +- > board/congatec/cgtqmx6eval/cgtqmx6eval.c | 4 +- > board/dhelectronics/dh_imx6/dh_imx6.c | 2 +- > board/dhelectronics/dh_imx6/dh_imx6_spl.c | 2 +- > board/el/el6x/el6x.c | 4 +- > board/embest/mx6boards/mx6boards.c | 4 +- > board/freescale/imx8mq_evk/imx8mq_evk.c | 2 +- > board/freescale/imx8mq_evk/spl.c | 2 +- > board/freescale/imx8qxp_mek/imx8qxp_mek.c | 2 +- > board/freescale/m54418twr/m54418twr.c | 2 +- > board/freescale/mx25pdk/mx25pdk.c | 6 +- > board/freescale/mx35pdk/mx35pdk.c | 4 +- > board/freescale/mx51evk/mx51evk.c | 6 +- > board/freescale/mx53ard/mx53ard.c | 4 +- > board/freescale/mx53evk/mx53evk.c | 4 +- > board/freescale/mx53loco/mx53loco.c | 4 +- > board/freescale/mx53smd/mx53smd.c | 4 +- > board/freescale/mx6qarm2/mx6qarm2.c | 4 +- > board/freescale/mx6sabreauto/mx6sabreauto.c | 4 +- > board/freescale/mx6sabresd/mx6sabresd.c | 4 +- > board/freescale/mx6slevk/mx6slevk.c | 2 +- > board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 2 +- > board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +- > board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 4 +- > board/freescale/mx6ullevk/mx6ullevk.c | 2 +- > board/freescale/mx7dsabresd/mx7dsabresd.c | 2 +- > board/freescale/s32v234evb/s32v234evb.c | 4 +- > board/freescale/vf610twr/vf610twr.c | 4 +- > board/gateworks/gw_ventana/common.c | 6 +- > board/gateworks/gw_ventana/gw_ventana.c | 2 +- > board/ge/bx50v3/bx50v3.c | 2 +- > board/ge/mx53ppd/mx53ppd.c | 2 +- > board/grinn/liteboard/board.c | 4 +- > board/inversepath/usbarmory/usbarmory.c | 2 +- > board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c | 4 +- > board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c | 2 +- > board/kosagi/novena/novena.c | 2 +- > board/kosagi/novena/novena_spl.c | 6 +- > board/liebherr/display5/common.c | 2 +- > board/liebherr/display5/display5.c | 6 +- > board/liebherr/display5/spl.c | 2 +- > board/liebherr/mccmon6/mccmon6.c | 2 +- > board/liebherr/mccmon6/spl.c | 2 +- > board/logicpd/imx6/imx6logic.c | 4 +- > board/menlo/m53menlo/m53menlo.c | 4 +- > board/phytec/pcl063/pcl063.c | 2 +- > board/phytec/pcl063/spl.c | 6 +- > board/phytec/pcm058/pcm058.c | 2 +- > board/phytec/pfla02/pfla02.c | 2 +- > board/seco/common/mx6.c | 2 +- > board/seco/mx6quq7/mx6quq7.c | 2 +- > board/sks-kinkel/sksimx6/sksimx6.c | 2 +- > board/softing/vining_2000/vining_2000.c | 2 +- > board/solidrun/mx6cuboxi/mx6cuboxi.c | 2 +- > board/tbs/tbs2910/tbs2910.c | 6 +- > board/technexion/pico-imx6ul/spl.c | 2 +- > board/technexion/pico-imx7d/spl.c | 2 +- > board/technologic/ts4800/ts4800.c | 6 +- > board/toradex/apalis_imx6/apalis_imx6.c | 6 +- > board/toradex/colibri_imx6/colibri_imx6.c | 6 +- > board/toradex/colibri_imx7/colibri_imx7.c | 2 +- > board/tqc/tqma6/tqma6.c | 2 +- > board/tqc/tqma6/tqma6_mba6.c | 2 +- > board/tqc/tqma6/tqma6_wru4.c | 2 +- > board/udoo/neo/neo.c | 2 +- > board/udoo/udoo.c | 2 +- > board/udoo/udoo_spl.c | 2 +- > board/variscite/dart_6ul/dart_6ul.c | 2 +- > board/variscite/dart_6ul/spl.c | 2 +- > board/wandboard/spl.c | 2 +- > board/warp/warp.c | 2 +- > board/woodburn/woodburn.c | 4 +- > configs/apalis-imx8qm_defconfig | 1 + > configs/apalis_imx6_defconfig | 2 +- > configs/aristainetos2_defconfig | 2 +- > configs/aristainetos2b_defconfig | 2 +- > configs/aristainetos_defconfig | 2 +- > configs/bk4r1_defconfig | 2 +- > configs/cgtqmx6eval_defconfig | 2 +- > configs/cl-som-imx7_defconfig | 2 +- > configs/cm_fx6_defconfig | 2 +- > configs/colibri-imx6ull_defconfig | 2 +- > configs/colibri-imx8qxp_defconfig | 1 + > configs/colibri_imx6_defconfig | 2 +- > configs/colibri_imx7_defconfig | 2 +- > configs/colibri_imx7_emmc_defconfig | 2 +- > configs/colibri_vf_defconfig | 2 +- > configs/dh_imx6_defconfig | 2 +- > configs/display5_defconfig | 2 +- > configs/display5_factory_defconfig | 2 +- > configs/dms-ba16-1g_defconfig | 2 +- > configs/dms-ba16_defconfig | 2 +- > configs/ge_bx50v3_defconfig | 2 +- > configs/gwventana_emmc_defconfig | 2 +- > configs/gwventana_gw5904_defconfig | 2 +- > configs/gwventana_nand_defconfig | 2 +- > configs/imx6dl_icore_nand_defconfig | 2 +- > configs/imx6dl_mamoj_defconfig | 2 +- > configs/imx6q_icore_nand_defconfig | 2 +- > configs/imx6q_logic_defconfig | 2 +- > configs/imx6qdl_icore_mipi_defconfig | 2 +- > configs/imx6qdl_icore_mmc_defconfig | 2 +- > configs/imx6qdl_icore_nand_defconfig | 2 +- > configs/imx6qdl_icore_rqs_defconfig | 2 +- > configs/imx6ul_geam_mmc_defconfig | 2 +- > configs/imx6ul_geam_nand_defconfig | 2 +- > configs/imx6ul_isiot_emmc_defconfig | 2 +- > configs/imx6ul_isiot_nand_defconfig | 2 +- > configs/imx8mq_evk_defconfig | 1 + > configs/imx8qm_mek_defconfig | 1 + > configs/imx8qxp_mek_defconfig | 1 + > configs/kp_imx53_defconfig | 2 +- > configs/kp_imx6q_tpc_defconfig | 1 + > configs/liteboard_defconfig | 2 +- > configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig | 1 + > configs/ls1012afrwy_qspi_defconfig | 1 + > configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig | 1 + > configs/ls1012afrwy_tfa_defconfig | 1 + > configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 1 + > configs/ls1028aqds_tfa_defconfig | 1 + > configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 1 + > configs/ls1028ardb_tfa_defconfig | 1 + > configs/m53menlo_defconfig | 2 +- > configs/marsboard_defconfig | 2 +- > configs/mccmon6_nor_defconfig | 2 +- > configs/mccmon6_sd_defconfig | 2 +- > configs/mx25pdk_defconfig | 2 +- > configs/mx35pdk_defconfig | 2 +- > configs/mx51evk_defconfig | 2 +- > configs/mx53ard_defconfig | 2 +- > configs/mx53cx9020_defconfig | 2 +- > configs/mx53evk_defconfig | 2 +- > configs/mx53loco_defconfig | 2 +- > configs/mx53ppd_defconfig | 2 +- > configs/mx53smd_defconfig | 2 +- > configs/mx6cuboxi_defconfig | 2 +- > configs/mx6dlarm2_defconfig | 2 +- > configs/mx6dlarm2_lpddr2_defconfig | 2 +- > configs/mx6qarm2_defconfig | 2 +- > configs/mx6qarm2_lpddr2_defconfig | 2 +- > configs/mx6qsabrelite_defconfig | 2 +- > configs/mx6sabreauto_defconfig | 2 +- > configs/mx6sabresd_defconfig | 2 +- > configs/mx6slevk_defconfig | 2 +- > configs/mx6slevk_spinor_defconfig | 2 +- > configs/mx6slevk_spl_defconfig | 2 +- > configs/mx6sllevk_defconfig | 2 +- > configs/mx6sllevk_plugin_defconfig | 2 +- > configs/mx6sxsabreauto_defconfig | 2 +- > configs/mx6sxsabresd_defconfig | 2 +- > configs/mx6sxsabresd_spl_defconfig | 2 +- > configs/mx6ul_14x14_evk_defconfig | 2 +- > configs/mx6ul_9x9_evk_defconfig | 2 +- > configs/mx6ull_14x14_evk_defconfig | 2 +- > configs/mx6ull_14x14_evk_plugin_defconfig | 2 +- > configs/mx7dsabresd_defconfig | 2 +- > configs/mx7dsabresd_qspi_defconfig | 2 +- > configs/mx7ulp_evk_defconfig | 2 +- > configs/mx7ulp_evk_plugin_defconfig | 2 +- > configs/nitrogen6dl2g_defconfig | 2 +- > configs/nitrogen6dl_defconfig | 2 +- > configs/nitrogen6q2g_defconfig | 2 +- > configs/nitrogen6q_defconfig | 2 +- > configs/nitrogen6s1g_defconfig | 2 +- > configs/nitrogen6s_defconfig | 2 +- > configs/novena_defconfig | 2 +- > configs/opos6uldev_defconfig | 2 +- > configs/ot1200_defconfig | 2 +- > configs/ot1200_spl_defconfig | 2 +- > configs/pcm052_defconfig | 2 +- > configs/pcm058_defconfig | 2 +- > configs/pfla02_defconfig | 2 +- > configs/phycore_pcl063_defconfig | 2 +- > configs/phycore_pcl063_ull_defconfig | 2 +- > configs/pico-hobbit-imx6ul_defconfig | 2 +- > configs/pico-hobbit-imx7d_defconfig | 2 +- > configs/pico-imx6ul_defconfig | 2 +- > configs/pico-imx7d_bl33_defconfig | 2 +- > configs/pico-imx7d_defconfig | 2 +- > configs/pico-pi-imx6ul_defconfig | 2 +- > configs/pico-pi-imx7d_defconfig | 2 +- > configs/platinum_picon_defconfig | 2 +- > configs/platinum_titanium_defconfig | 2 +- > configs/riotboard_defconfig | 2 +- > configs/riotboard_spl_defconfig | 2 +- > configs/s32v234evb_defconfig | 2 +- > configs/secomx6quq7_defconfig | 2 +- > configs/sksimx6_defconfig | 2 +- > configs/tbs2910_defconfig | 2 +- > configs/titanium_defconfig | 2 +- > configs/tqma6dl_mba6_mmc_defconfig | 2 +- > configs/tqma6dl_mba6_spi_defconfig | 2 +- > configs/tqma6q_mba6_mmc_defconfig | 2 +- > configs/tqma6q_mba6_spi_defconfig | 2 +- > configs/tqma6s_mba6_mmc_defconfig | 2 +- > configs/tqma6s_mba6_spi_defconfig | 2 +- > configs/tqma6s_wru4_mmc_defconfig | 2 +- > configs/ts4800_defconfig | 2 +- > configs/udoo_defconfig | 2 +- > configs/udoo_neo_defconfig | 2 +- > configs/usbarmory_defconfig | 2 +- > configs/variscite_dart6ul_defconfig | 2 +- > configs/vf610twr_defconfig | 2 +- > configs/vf610twr_nand_defconfig | 2 +- > configs/vining_2000_defconfig | 2 +- > configs/wandboard_defconfig | 2 +- > configs/warp7_bl33_defconfig | 2 +- > configs/warp7_defconfig | 2 +- > configs/warp_defconfig | 2 +- > configs/woodburn_defconfig | 2 +- > configs/woodburn_sd_defconfig | 2 +- > configs/xpress_defconfig | 2 +- > configs/xpress_spl_defconfig | 2 +- > configs/zc5202_defconfig | 2 +- > configs/zc5601_defconfig | 2 +- > drivers/mmc/Kconfig | 10 +- > drivers/mmc/Makefile | 1 + > drivers/mmc/fsl_esdhc.c | 625 +--------------------- > drivers/mmc/{fsl_esdhc.c => fsl_esdhc_imx.c} | 70 +-- > include/configs/apalis-imx8.h | 1 - > include/configs/colibri-imx8x.h | 1 - > include/configs/imx8mq_evk.h | 1 - > include/configs/imx8qm_mek.h | 1 - > include/configs/imx8qxp_mek.h | 1 - > include/configs/kp_imx6q_tpc.h | 1 - > include/configs/ls1012afrwy.h | 1 - > include/configs/ls1028a_common.h | 7 - > include/fsl_esdhc.h | 57 -- > include/{fsl_esdhc.h => fsl_esdhc_imx.h} | 17 +- > 256 files changed, 355 insertions(+), 1055 deletions(-) > copy drivers/mmc/{fsl_esdhc.c => fsl_esdhc_imx.c} (95%) > copy include/{fsl_esdhc.h => fsl_esdhc_imx.h} (97%) > > -- > 2.7.4 >
On Tue, Jun 25, 2019 at 02:40:45PM +0200, Stefano Babic wrote: > Hi everybody, > > On 25/06/19 13:59, Marek Vasut wrote: > > On 6/25/19 7:38 AM, Peng Fan wrote: > >>> Subject: Re: [v8, 0/5] Split fsl_esdhc driver for i.MX > >>> > >>> On 6/24/19 7:28 AM, Peng Fan wrote: > >>>> Hi Y.b, Stefano, > >>>> > >>>>> Subject: [v8, 0/5] Split fsl_esdhc driver for i.MX > >>>> > >>>> It has been long time since V1, and there might be more conflicts when > >>>> new defconfig changes. So I have picked up this patchset to > >>>> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > >>>> > >>> ub.com%2FMrVan%2Fu-boot%2Freleases%2Ftag%2Fmmc-6-23&data=0 > >>> 2%7C01%7 > >>>> > >>> Cpeng.fan%40nxp.com%7C54029d738be5448975ee08d6f88bc8b8%7C686ea > >>> 1d3bc2b4 > >>>> > >>> c6fa92cd99c5c301635%7C0%7C1%7C636969676592345179&sdata=Uf > >>> 2As%2B0ix > >>>> 0NTGJA1nc66WDcx%2BYip0nkt1jK%2B7O8Eo6Y%3D&reserved=0 > >>>> and will send pull request soon. > >>>> My gitlab account not ready, so still use github. > >>> > >>> That's for -next , right ? > >> > >> I prefer this go in this release, it is long time since v1 out and there > >> are several R-b A-b tags got. > >> Just sent pull request to Tom a few hours ago. > > > > I don't think there's enough time to test this, it's RC4 already, so > > critical fixes only. That was the whole point of extending the cycle > > by another month. > > I agree with Marek - I am not pushing new things (even last DM > conversion) to current release. I will just pick up some fixes, and I am > starting to feed the -next branch of u-boot-imx. Thanks for speaking up. I've taken this for my -next so that further fixups on the defconfigs are on me.