Message ID | 1558992127-26008-8-git-send-email-ioana.ciornei@nxp.com |
---|---|
State | Changes Requested |
Delegated to: | David Miller |
Headers | show |
Series | Decoupling PHYLINK from struct net_device | expand |
On 5/27/2019 2:22 PM, Ioana Ciornei wrote: > In the PHYLINK_DEV operation type, the PHYLINK infrastructure can work > without an attached net_device. For printing usecases, instead, a struct > device * should be passed to PHYLINK using the phylink_config structure. > > Also, netif_carrier_* calls ar guarded by the presence of a valid > net_device. When using the PHYLINK_DEV operation type, we cannot check > link status using the netif_carrier_ok() API so instead, keep an > internal state of the MAC and call mac_link_{down,up} only when the link > changed. > > Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> > Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Should not this patch be re-ordered to be after patch #8? Other than that: Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> Subject: Re: [PATCH 07/11] net: phylink: Add PHYLINK_DEV operation type > > > > On 5/27/2019 2:22 PM, Ioana Ciornei wrote: > > In the PHYLINK_DEV operation type, the PHYLINK infrastructure can work > > without an attached net_device. For printing usecases, instead, a > > struct device * should be passed to PHYLINK using the phylink_config > structure. > > > > Also, netif_carrier_* calls ar guarded by the presence of a valid > > net_device. When using the PHYLINK_DEV operation type, we cannot check > > link status using the netif_carrier_ok() API so instead, keep an > > internal state of the MAC and call mac_link_{down,up} only when the > > link changed. > > > > Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> > > Signed-off-by: Vladimir Oltean <olteanv@gmail.com> > > Should not this patch be re-ordered to be after patch #8? Other than that: > Not necessarily. Even without patch #8 ("net: phylink: Add phylink_{printk,err,warn,info,dbg} macros") everything will function properly with the mention that in case of PHYLINK_DEV a NULL net_device will get printed. I chose to add the phylink_printk after this patch because now we have the whole picture. -- Ioana > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> > -- > Florian
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 5a283bf9d402..5f6120f3fa3f 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -42,6 +42,8 @@ struct phylink { struct net_device *netdev; const struct phylink_mac_ops *ops; struct phylink_config *config; + struct device *dev; + unsigned int old_link_state:1; unsigned long phylink_disable_state; /* bitmask of disables */ struct phy_device *phydev; @@ -404,7 +406,8 @@ static void phylink_mac_link_up(struct phylink *pl, pl->phy_state.interface, pl->phydev); - netif_carrier_on(ndev); + if (ndev) + netif_carrier_on(ndev); netdev_info(ndev, "Link is Up - %s/%s - flow control %s\n", @@ -417,7 +420,8 @@ static void phylink_mac_link_down(struct phylink *pl) { struct net_device *ndev = pl->netdev; - netif_carrier_off(ndev); + if (ndev) + netif_carrier_off(ndev); pl->ops->mac_link_down(pl->config, pl->link_an_mode, pl->phy_state.interface); netdev_info(ndev, "Link is Down\n"); @@ -428,6 +432,7 @@ static void phylink_resolve(struct work_struct *w) struct phylink *pl = container_of(w, struct phylink, resolve); struct phylink_link_state link_state; struct net_device *ndev = pl->netdev; + int link_changed; mutex_lock(&pl->state_mutex); if (pl->phylink_disable_state) { @@ -470,7 +475,13 @@ static void phylink_resolve(struct work_struct *w) } } - if (link_state.link != netif_carrier_ok(ndev)) { + if (pl->netdev) + link_changed = (link_state.link != netif_carrier_ok(ndev)); + else + link_changed = (link_state.link != pl->old_link_state); + + if (link_changed) { + pl->old_link_state = link_state.link; if (!link_state.link) phylink_mac_link_down(pl); else @@ -571,6 +582,8 @@ struct phylink *phylink_create(struct phylink_config *config, pl->config = config; if (config->type == PHYLINK_NETDEV) { pl->netdev = to_net_dev(config->dev); + } else if (config->type == PHYLINK_DEV) { + pl->dev = config->dev; } else { kfree(pl); return ERR_PTR(-EINVAL); @@ -910,7 +923,8 @@ void phylink_start(struct phylink *pl) phy_modes(pl->link_config.interface)); /* Always set the carrier off */ - netif_carrier_off(pl->netdev); + if (pl->netdev) + netif_carrier_off(pl->netdev); /* Apply the link configuration to the MAC when starting. This allows * a fixed-link to start with the correct parameters, and also @@ -1255,7 +1269,8 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl, switch (pl->link_an_mode) { case MLO_AN_PHY: /* Silently mark the carrier down, and then trigger a resolve */ - netif_carrier_off(pl->netdev); + if (pl->netdev) + netif_carrier_off(pl->netdev); phylink_run_resolve(pl); break; diff --git a/include/linux/phylink.h b/include/linux/phylink.h index 67f35f07ac4b..0f6f65bb9d44 100644 --- a/include/linux/phylink.h +++ b/include/linux/phylink.h @@ -56,6 +56,7 @@ struct phylink_link_state { enum phylink_op_type { PHYLINK_NETDEV = 0, + PHYLINK_DEV, }; /**