mbox series

[v3,0/2] Enable wm8524 codec on i.MX8MM EVK

Message ID 20190424150350.7963-1-daniel.baluta@nxp.com
Headers show
Series Enable wm8524 codec on i.MX8MM EVK | expand

Message

Daniel Baluta April 24, 2019, 3:04 p.m. UTC 
This patch series introduces the SAI nodes on i.MX8MM EVK then
creates the wm8524 codec node and finally uses simple card machine
driver to create a sound card.

Changes since v2:
	- place compatible strings one a single lines
	- move GPIO pinctrl in a node of its own
	- remove codec phandle

Changes since v1:
        - use "fsl,imx8mm-sai", "fsl,imx8mq-sai" compatbile strings and
          remove "fsl,imx6sx-sai" because SAI module on i.MX8M is not
          compatbile with SAI modules form i.MX6

Daniel Baluta (2):
  arm64: dts: imx8mm: Add SAI nodes
  arm64: dts: imx8mm-evk: Enable audio codec wm8524

 arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 55 ++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mm.dtsi    | 66 ++++++++++++++++++++
 2 files changed, 121 insertions(+)

Comments

Shawn Guo May 12, 2019, 1:30 a.m. UTC | #1 
On Wed, Apr 24, 2019 at 03:04:12PM +0000, Daniel Baluta wrote:
> This patch series introduces the SAI nodes on i.MX8MM EVK then
> creates the wm8524 codec node and finally uses simple card machine
> driver to create a sound card.
> 
> Changes since v2:
> 	- place compatible strings one a single lines
> 	- move GPIO pinctrl in a node of its own
> 	- remove codec phandle
> 
> Changes since v1:
>         - use "fsl,imx8mm-sai", "fsl,imx8mq-sai" compatbile strings and
>           remove "fsl,imx6sx-sai" because SAI module on i.MX8M is not
>           compatbile with SAI modules form i.MX6
> 
> Daniel Baluta (2):
>   arm64: dts: imx8mm: Add SAI nodes
>   arm64: dts: imx8mm-evk: Enable audio codec wm8524

Hi Marco,

Are you fine with this version?

Shawn