@@ -334,7 +334,7 @@ static void at803x_link_change_notify(struct phy_device *phydev)
* cannot recover from by software.
*/
if (phydev->state == PHY_NOLINK) {
- if (phydev->mdio.reset && !priv->phy_reset) {
+ if (phydev->mdio.reset_gpio && !priv->phy_reset) {
struct at803x_context context;
at803x_context_save(phydev, &context);
@@ -56,7 +56,7 @@ static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
return PTR_ERR(gpiod);
}
- mdiodev->reset = gpiod;
+ mdiodev->reset_gpio = gpiod;
return 0;
}
@@ -469,8 +469,8 @@ void mdiobus_unregister(struct mii_bus *bus)
if (!mdiodev)
continue;
- if (mdiodev->reset)
- gpiod_put(mdiodev->reset);
+ if (mdiodev->reset_gpio)
+ gpiod_put(mdiodev->reset_gpio);
mdiodev->device_remove(mdiodev);
mdiodev->device_free(mdiodev);
@@ -117,11 +117,11 @@ void mdio_device_reset(struct mdio_device *mdiodev, int value)
{
unsigned int d;
- if (!mdiodev->reset && !mdiodev->reset_ctrl)
+ if (!mdiodev->reset_gpio && !mdiodev->reset_ctrl)
return;
- if (mdiodev->reset)
- gpiod_set_value(mdiodev->reset, value);
+ if (mdiodev->reset_gpio)
+ gpiod_set_value(mdiodev->reset_gpio, value);
if (mdiodev->reset_ctrl) {
if (value)
@@ -39,7 +39,7 @@ struct mdio_device {
/* Bus address of the MDIO device (0-31) */
int addr;
int flags;
- struct gpio_desc *reset;
+ struct gpio_desc *reset_gpio;
struct reset_control *reset_ctrl;
unsigned int reset_assert_delay;
unsigned int reset_deassert_delay;
This renames the GPIO reset of mdio devices from 'reset' to 'reset_gpio' to better differentiate between GPIO and reset-controller driven reset line. Signed-off-by: David Bauer <mail@david-bauer.net> --- drivers/net/phy/at803x.c | 2 +- drivers/net/phy/mdio_bus.c | 6 +++--- drivers/net/phy/mdio_device.c | 6 +++--- include/linux/mdio.h | 2 +- 4 files changed, 8 insertions(+), 8 deletions(-)