Message ID | 1553774276-24675-1-git-send-email-jonnyc@amazon.com |
---|---|
State | Accepted |
Delegated to: | Bjorn Helgaas |
Headers | show |
Series | [v3] PCI: al: Add Amazon Annapurna Labs PCIe host controller driver | expand |
On Thu, 2019-03-28 at 13:57 +0200, Jonathan Chocron wrote: > Add support for Amazon's Annapurna Labs PCIe driver. The HW > controller > is based on DesignWare's IP. > > The HW doesn't support accessing the Root Port's config space via > ECAM, > so we obtain its base address via an AMZN0001 device. > > Furthermore, the DesignWare PCIe controller doesn't filter out config > transactions sent to devices 1 and up on its bus, so they are > filtered > by the driver. > > All subordinate buses do support ECAM access. > > Implementing specific PCI config access functions involves: > - Adding an init function to obtain the Root Port's base address > from > an AMZN0001 device. > - Adding a new entry in the MCFG quirk array > > Co-developed-by: Vladimir Aerov <vaerov@amazon.com> > Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> > Signed-off-by: Vladimir Aerov <vaerov@amazon.com> > Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Late to the party, sorry :-) That kernel.crashing.org email is on its last legs... Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> > --- > > --v2: > - Fix commit message comments (incl. using AMZN0001 instead of > PNP0C02) > - Use the usual multi-line comment style > > --v3: > - Fix additional commit message comments > > MAINTAINERS | 6 +++ > drivers/acpi/pci_mcfg.c | 12 +++++ > drivers/pci/controller/dwc/Makefile | 1 + > drivers/pci/controller/dwc/pcie-al.c | 93 > ++++++++++++++++++++++++++++++++++++ > include/linux/pci-ecam.h | 1 + > 5 files changed, 113 insertions(+) > create mode 100644 drivers/pci/controller/dwc/pcie-al.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 32d444476a90..7a17017f9f82 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11769,6 +11769,12 @@ T: git > git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/ > S: Supported > F: drivers/pci/controller/ > > +PCIE DRIVER FOR ANNAPURNA LABS > +M: Jonathan Chocron <jonnyc@amazon.com> > +L: linux-pci@vger.kernel.org > +S: Maintained > +F: drivers/pci/controller/dwc/pcie-al.c > + > PCIE DRIVER FOR AMLOGIC MESON > M: Yue Wang <yue.wang@Amlogic.com> > L: linux-pci@vger.kernel.org > diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c > index a4e8432fc2fb..b42be067fb83 100644 > --- a/drivers/acpi/pci_mcfg.c > +++ b/drivers/acpi/pci_mcfg.c > @@ -52,6 +52,18 @@ struct mcfg_fixup { > static struct mcfg_fixup mcfg_quirks[] = { > /* { OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, > */ > > +#define AL_ECAM(table_id, rev, seg, ops) \ > + { "AMAZON", table_id, rev, seg, MCFG_BUS_ANY, ops } > + > + AL_ECAM("GRAVITON", 0, 0, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 1, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 2, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 3, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 4, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 5, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 6, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 7, &al_pcie_ops), > + > #define QCOM_ECAM32(seg) \ > { "QCOM ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops } > > diff --git a/drivers/pci/controller/dwc/Makefile > b/drivers/pci/controller/dwc/Makefile > index 7bcdcdf5024e..1ea773c0070d 100644 > --- a/drivers/pci/controller/dwc/Makefile > +++ b/drivers/pci/controller/dwc/Makefile > @@ -28,5 +28,6 @@ obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o > # depending on whether ACPI, the DT driver, or both are enabled. > > ifdef CONFIG_PCI > +obj-$(CONFIG_ARM64) += pcie-al.o > obj-$(CONFIG_ARM64) += pcie-hisi.o > endif > diff --git a/drivers/pci/controller/dwc/pcie-al.c > b/drivers/pci/controller/dwc/pcie-al.c > new file mode 100644 > index 000000000000..65a9776c12be > --- /dev/null > +++ b/drivers/pci/controller/dwc/pcie-al.c > @@ -0,0 +1,93 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * PCIe host controller driver for Amazon's Annapurna Labs IP (used > in chips > + * such as Graviton and Alpine) > + * > + * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights > Reserved. > + * > + * Author: Jonathan Chocron <jonnyc@amazon.com> > + */ > + > +#include <linux/pci.h> > +#include <linux/pci-ecam.h> > +#include <linux/pci-acpi.h> > +#include "../../pci.h" > + > +#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) > + > +struct al_pcie_acpi { > + void __iomem *dbi_base; > +}; > + > +static void __iomem *al_pcie_map_bus(struct pci_bus *bus, unsigned > int devfn, > + int where) > +{ > + struct pci_config_window *cfg = bus->sysdata; > + struct al_pcie_acpi *pcie = cfg->priv; > + void __iomem *dbi_base = pcie->dbi_base; > + > + if (bus->number == cfg->busr.start) { > + /* > + * The DW PCIe core doesn't filter out transactions to > other > + * devices/functions on the primary bus num, so we do > this here. > + */ > + if (PCI_SLOT(devfn) > 0) > + return NULL; > + else > + return dbi_base + where; > + } > + > + return pci_ecam_map_bus(bus, devfn, where); > +} > + > +static int al_pcie_init(struct pci_config_window *cfg) > +{ > + struct device *dev = cfg->parent; > + struct acpi_device *adev = to_acpi_device(dev); > + struct acpi_pci_root *root = acpi_driver_data(adev); > + struct al_pcie_acpi *al_pcie; > + struct resource *res; > + int ret; > + > + al_pcie = devm_kzalloc(dev, sizeof(*al_pcie), GFP_KERNEL); > + if (!al_pcie) > + return -ENOMEM; > + > + res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL); > + if (!res) > + return -ENOMEM; > + > + ret = acpi_get_rc_resources(dev, "AMZN0001", root->segment, > res); > + if (ret) { > + dev_err(dev, "can't get rc dbi base address for SEG > %d\n", > + root->segment); > + return ret; > + } > + > + dev_dbg(dev, "Root port dbi res: %pR\n", res); > + > + al_pcie->dbi_base = devm_pci_remap_cfg_resource(dev, res); > + if (IS_ERR(al_pcie->dbi_base)) { > + long err = PTR_ERR(al_pcie->dbi_base); > + > + dev_err(dev, "couldn't remap dbi base %pR (err:%ld)\n", > + res, err); > + return err; > + } > + > + cfg->priv = al_pcie; > + > + return 0; > +} > + > +struct pci_ecam_ops al_pcie_ops = { > + .bus_shift = 20, > + .init = al_pcie_init, > + .pci_ops = { > + .map_bus = al_pcie_map_bus, > + .read = pci_generic_config_read, > + .write = pci_generic_config_write, > + } > +}; > + > +#endif /* defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) */ > diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h > index 29efa09d686b..a73164c85e78 100644 > --- a/include/linux/pci-ecam.h > +++ b/include/linux/pci-ecam.h > @@ -56,6 +56,7 @@ void __iomem *pci_ecam_map_bus(struct pci_bus *bus, > unsigned int devfn, > extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX > 1.x */ > extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene > PCIe v1 */ > extern struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene > PCIe v2.x */ > +extern struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs > PCIe */ > #endif > > #ifdef CONFIG_PCI_HOST_COMMON
On Tue, 2019-04-09 at 08:57 +1000, Benjamin Herrenschmidt wrote: > On Thu, 2019-03-28 at 13:57 +0200, Jonathan Chocron wrote: > > Add support for Amazon's Annapurna Labs PCIe driver. The HW > > controller > > is based on DesignWare's IP. > > > > The HW doesn't support accessing the Root Port's config space via > > ECAM, > > so we obtain its base address via an AMZN0001 device. > > > > Furthermore, the DesignWare PCIe controller doesn't filter out > > config > > transactions sent to devices 1 and up on its bus, so they are > > filtered > > by the driver. > > > > All subordinate buses do support ECAM access. > > > > Implementing specific PCI config access functions involves: > > - Adding an init function to obtain the Root Port's base address > > from > > an AMZN0001 device. > > - Adding a new entry in the MCFG quirk array > > > > Co-developed-by: Vladimir Aerov <vaerov@amazon.com> > > Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> > > Signed-off-by: Vladimir Aerov <vaerov@amazon.com> > > Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> > > Late to the party, sorry :-) That kernel.crashing.org email is on its > last legs... > > Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Lorenzo, is there anything else you need from Jonny before this can be applied? Thanks.
On Thu, Mar 28, 2019 at 01:57:56PM +0200, Jonathan Chocron wrote: > Add support for Amazon's Annapurna Labs PCIe driver. The HW controller > is based on DesignWare's IP. > > The HW doesn't support accessing the Root Port's config space via ECAM, > so we obtain its base address via an AMZN0001 device. > > Furthermore, the DesignWare PCIe controller doesn't filter out config > transactions sent to devices 1 and up on its bus, so they are filtered > by the driver. > > All subordinate buses do support ECAM access. > > Implementing specific PCI config access functions involves: > - Adding an init function to obtain the Root Port's base address from > an AMZN0001 device. > - Adding a new entry in the MCFG quirk array > > Co-developed-by: Vladimir Aerov <vaerov@amazon.com> > Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> > Signed-off-by: Vladimir Aerov <vaerov@amazon.com> > Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> > --- > > --v2: > - Fix commit message comments (incl. using AMZN0001 instead of > PNP0C02) > - Use the usual multi-line comment style > > --v3: > - Fix additional commit message comments > > MAINTAINERS | 6 +++ > drivers/acpi/pci_mcfg.c | 12 +++++ > drivers/pci/controller/dwc/Makefile | 1 + > drivers/pci/controller/dwc/pcie-al.c | 93 ++++++++++++++++++++++++++++++++++++ > include/linux/pci-ecam.h | 1 + > 5 files changed, 113 insertions(+) > create mode 100644 drivers/pci/controller/dwc/pcie-al.c I think Bjorn can take this if he is OK with it, it is not really necessary to queue it via the controller/dwc tree so: Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > diff --git a/MAINTAINERS b/MAINTAINERS > index 32d444476a90..7a17017f9f82 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11769,6 +11769,12 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/ > S: Supported > F: drivers/pci/controller/ > > +PCIE DRIVER FOR ANNAPURNA LABS > +M: Jonathan Chocron <jonnyc@amazon.com> > +L: linux-pci@vger.kernel.org > +S: Maintained > +F: drivers/pci/controller/dwc/pcie-al.c > + > PCIE DRIVER FOR AMLOGIC MESON > M: Yue Wang <yue.wang@Amlogic.com> > L: linux-pci@vger.kernel.org > diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c > index a4e8432fc2fb..b42be067fb83 100644 > --- a/drivers/acpi/pci_mcfg.c > +++ b/drivers/acpi/pci_mcfg.c > @@ -52,6 +52,18 @@ struct mcfg_fixup { > static struct mcfg_fixup mcfg_quirks[] = { > /* { OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, */ > > +#define AL_ECAM(table_id, rev, seg, ops) \ > + { "AMAZON", table_id, rev, seg, MCFG_BUS_ANY, ops } > + > + AL_ECAM("GRAVITON", 0, 0, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 1, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 2, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 3, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 4, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 5, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 6, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 7, &al_pcie_ops), > + > #define QCOM_ECAM32(seg) \ > { "QCOM ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops } > > diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile > index 7bcdcdf5024e..1ea773c0070d 100644 > --- a/drivers/pci/controller/dwc/Makefile > +++ b/drivers/pci/controller/dwc/Makefile > @@ -28,5 +28,6 @@ obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o > # depending on whether ACPI, the DT driver, or both are enabled. > > ifdef CONFIG_PCI > +obj-$(CONFIG_ARM64) += pcie-al.o > obj-$(CONFIG_ARM64) += pcie-hisi.o > endif > diff --git a/drivers/pci/controller/dwc/pcie-al.c b/drivers/pci/controller/dwc/pcie-al.c > new file mode 100644 > index 000000000000..65a9776c12be > --- /dev/null > +++ b/drivers/pci/controller/dwc/pcie-al.c > @@ -0,0 +1,93 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * PCIe host controller driver for Amazon's Annapurna Labs IP (used in chips > + * such as Graviton and Alpine) > + * > + * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. > + * > + * Author: Jonathan Chocron <jonnyc@amazon.com> > + */ > + > +#include <linux/pci.h> > +#include <linux/pci-ecam.h> > +#include <linux/pci-acpi.h> > +#include "../../pci.h" > + > +#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) > + > +struct al_pcie_acpi { > + void __iomem *dbi_base; > +}; > + > +static void __iomem *al_pcie_map_bus(struct pci_bus *bus, unsigned int devfn, > + int where) > +{ > + struct pci_config_window *cfg = bus->sysdata; > + struct al_pcie_acpi *pcie = cfg->priv; > + void __iomem *dbi_base = pcie->dbi_base; > + > + if (bus->number == cfg->busr.start) { > + /* > + * The DW PCIe core doesn't filter out transactions to other > + * devices/functions on the primary bus num, so we do this here. > + */ > + if (PCI_SLOT(devfn) > 0) > + return NULL; > + else > + return dbi_base + where; > + } > + > + return pci_ecam_map_bus(bus, devfn, where); > +} > + > +static int al_pcie_init(struct pci_config_window *cfg) > +{ > + struct device *dev = cfg->parent; > + struct acpi_device *adev = to_acpi_device(dev); > + struct acpi_pci_root *root = acpi_driver_data(adev); > + struct al_pcie_acpi *al_pcie; > + struct resource *res; > + int ret; > + > + al_pcie = devm_kzalloc(dev, sizeof(*al_pcie), GFP_KERNEL); > + if (!al_pcie) > + return -ENOMEM; > + > + res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL); > + if (!res) > + return -ENOMEM; > + > + ret = acpi_get_rc_resources(dev, "AMZN0001", root->segment, res); > + if (ret) { > + dev_err(dev, "can't get rc dbi base address for SEG %d\n", > + root->segment); > + return ret; > + } > + > + dev_dbg(dev, "Root port dbi res: %pR\n", res); > + > + al_pcie->dbi_base = devm_pci_remap_cfg_resource(dev, res); > + if (IS_ERR(al_pcie->dbi_base)) { > + long err = PTR_ERR(al_pcie->dbi_base); > + > + dev_err(dev, "couldn't remap dbi base %pR (err:%ld)\n", > + res, err); > + return err; > + } > + > + cfg->priv = al_pcie; > + > + return 0; > +} > + > +struct pci_ecam_ops al_pcie_ops = { > + .bus_shift = 20, > + .init = al_pcie_init, > + .pci_ops = { > + .map_bus = al_pcie_map_bus, > + .read = pci_generic_config_read, > + .write = pci_generic_config_write, > + } > +}; > + > +#endif /* defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) */ > diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h > index 29efa09d686b..a73164c85e78 100644 > --- a/include/linux/pci-ecam.h > +++ b/include/linux/pci-ecam.h > @@ -56,6 +56,7 @@ void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn, > extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */ > extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 */ > extern struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */ > +extern struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */ > #endif > > #ifdef CONFIG_PCI_HOST_COMMON > -- > 1.9.1 >
On Thu, Mar 28, 2019 at 01:57:56PM +0200, Jonathan Chocron wrote: > Add support for Amazon's Annapurna Labs PCIe driver. The HW controller > is based on DesignWare's IP. > > The HW doesn't support accessing the Root Port's config space via ECAM, > so we obtain its base address via an AMZN0001 device. > > Furthermore, the DesignWare PCIe controller doesn't filter out config > transactions sent to devices 1 and up on its bus, so they are filtered > by the driver. > > All subordinate buses do support ECAM access. > > Implementing specific PCI config access functions involves: > - Adding an init function to obtain the Root Port's base address from > an AMZN0001 device. > - Adding a new entry in the MCFG quirk array > > Co-developed-by: Vladimir Aerov <vaerov@amazon.com> > Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> > Signed-off-by: Vladimir Aerov <vaerov@amazon.com> > Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Applied with Ben's reviewed-by and Lorenzo's ack to pci/host/al for v5.2, thanks! > --- > > --v2: > - Fix commit message comments (incl. using AMZN0001 instead of > PNP0C02) > - Use the usual multi-line comment style > > --v3: > - Fix additional commit message comments > > MAINTAINERS | 6 +++ > drivers/acpi/pci_mcfg.c | 12 +++++ > drivers/pci/controller/dwc/Makefile | 1 + > drivers/pci/controller/dwc/pcie-al.c | 93 ++++++++++++++++++++++++++++++++++++ > include/linux/pci-ecam.h | 1 + > 5 files changed, 113 insertions(+) > create mode 100644 drivers/pci/controller/dwc/pcie-al.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 32d444476a90..7a17017f9f82 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11769,6 +11769,12 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/ > S: Supported > F: drivers/pci/controller/ > > +PCIE DRIVER FOR ANNAPURNA LABS > +M: Jonathan Chocron <jonnyc@amazon.com> > +L: linux-pci@vger.kernel.org > +S: Maintained > +F: drivers/pci/controller/dwc/pcie-al.c > + > PCIE DRIVER FOR AMLOGIC MESON > M: Yue Wang <yue.wang@Amlogic.com> > L: linux-pci@vger.kernel.org > diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c > index a4e8432fc2fb..b42be067fb83 100644 > --- a/drivers/acpi/pci_mcfg.c > +++ b/drivers/acpi/pci_mcfg.c > @@ -52,6 +52,18 @@ struct mcfg_fixup { > static struct mcfg_fixup mcfg_quirks[] = { > /* { OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, */ > > +#define AL_ECAM(table_id, rev, seg, ops) \ > + { "AMAZON", table_id, rev, seg, MCFG_BUS_ANY, ops } > + > + AL_ECAM("GRAVITON", 0, 0, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 1, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 2, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 3, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 4, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 5, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 6, &al_pcie_ops), > + AL_ECAM("GRAVITON", 0, 7, &al_pcie_ops), > + > #define QCOM_ECAM32(seg) \ > { "QCOM ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops } > > diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile > index 7bcdcdf5024e..1ea773c0070d 100644 > --- a/drivers/pci/controller/dwc/Makefile > +++ b/drivers/pci/controller/dwc/Makefile > @@ -28,5 +28,6 @@ obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o > # depending on whether ACPI, the DT driver, or both are enabled. > > ifdef CONFIG_PCI > +obj-$(CONFIG_ARM64) += pcie-al.o > obj-$(CONFIG_ARM64) += pcie-hisi.o > endif > diff --git a/drivers/pci/controller/dwc/pcie-al.c b/drivers/pci/controller/dwc/pcie-al.c > new file mode 100644 > index 000000000000..65a9776c12be > --- /dev/null > +++ b/drivers/pci/controller/dwc/pcie-al.c > @@ -0,0 +1,93 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * PCIe host controller driver for Amazon's Annapurna Labs IP (used in chips > + * such as Graviton and Alpine) > + * > + * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. > + * > + * Author: Jonathan Chocron <jonnyc@amazon.com> > + */ > + > +#include <linux/pci.h> > +#include <linux/pci-ecam.h> > +#include <linux/pci-acpi.h> > +#include "../../pci.h" > + > +#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) > + > +struct al_pcie_acpi { > + void __iomem *dbi_base; > +}; > + > +static void __iomem *al_pcie_map_bus(struct pci_bus *bus, unsigned int devfn, > + int where) > +{ > + struct pci_config_window *cfg = bus->sysdata; > + struct al_pcie_acpi *pcie = cfg->priv; > + void __iomem *dbi_base = pcie->dbi_base; > + > + if (bus->number == cfg->busr.start) { > + /* > + * The DW PCIe core doesn't filter out transactions to other > + * devices/functions on the primary bus num, so we do this here. > + */ > + if (PCI_SLOT(devfn) > 0) > + return NULL; > + else > + return dbi_base + where; > + } > + > + return pci_ecam_map_bus(bus, devfn, where); > +} > + > +static int al_pcie_init(struct pci_config_window *cfg) > +{ > + struct device *dev = cfg->parent; > + struct acpi_device *adev = to_acpi_device(dev); > + struct acpi_pci_root *root = acpi_driver_data(adev); > + struct al_pcie_acpi *al_pcie; > + struct resource *res; > + int ret; > + > + al_pcie = devm_kzalloc(dev, sizeof(*al_pcie), GFP_KERNEL); > + if (!al_pcie) > + return -ENOMEM; > + > + res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL); > + if (!res) > + return -ENOMEM; > + > + ret = acpi_get_rc_resources(dev, "AMZN0001", root->segment, res); > + if (ret) { > + dev_err(dev, "can't get rc dbi base address for SEG %d\n", > + root->segment); > + return ret; > + } > + > + dev_dbg(dev, "Root port dbi res: %pR\n", res); > + > + al_pcie->dbi_base = devm_pci_remap_cfg_resource(dev, res); > + if (IS_ERR(al_pcie->dbi_base)) { > + long err = PTR_ERR(al_pcie->dbi_base); > + > + dev_err(dev, "couldn't remap dbi base %pR (err:%ld)\n", > + res, err); > + return err; > + } > + > + cfg->priv = al_pcie; > + > + return 0; > +} > + > +struct pci_ecam_ops al_pcie_ops = { > + .bus_shift = 20, > + .init = al_pcie_init, > + .pci_ops = { > + .map_bus = al_pcie_map_bus, > + .read = pci_generic_config_read, > + .write = pci_generic_config_write, > + } > +}; > + > +#endif /* defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) */ > diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h > index 29efa09d686b..a73164c85e78 100644 > --- a/include/linux/pci-ecam.h > +++ b/include/linux/pci-ecam.h > @@ -56,6 +56,7 @@ void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn, > extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */ > extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 */ > extern struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */ > +extern struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */ > #endif > > #ifdef CONFIG_PCI_HOST_COMMON > -- > 1.9.1 >
diff --git a/MAINTAINERS b/MAINTAINERS index 32d444476a90..7a17017f9f82 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11769,6 +11769,12 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/ S: Supported F: drivers/pci/controller/ +PCIE DRIVER FOR ANNAPURNA LABS +M: Jonathan Chocron <jonnyc@amazon.com> +L: linux-pci@vger.kernel.org +S: Maintained +F: drivers/pci/controller/dwc/pcie-al.c + PCIE DRIVER FOR AMLOGIC MESON M: Yue Wang <yue.wang@Amlogic.com> L: linux-pci@vger.kernel.org diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c index a4e8432fc2fb..b42be067fb83 100644 --- a/drivers/acpi/pci_mcfg.c +++ b/drivers/acpi/pci_mcfg.c @@ -52,6 +52,18 @@ struct mcfg_fixup { static struct mcfg_fixup mcfg_quirks[] = { /* { OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, */ +#define AL_ECAM(table_id, rev, seg, ops) \ + { "AMAZON", table_id, rev, seg, MCFG_BUS_ANY, ops } + + AL_ECAM("GRAVITON", 0, 0, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 1, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 2, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 3, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 4, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 5, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 6, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 7, &al_pcie_ops), + #define QCOM_ECAM32(seg) \ { "QCOM ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops } diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile index 7bcdcdf5024e..1ea773c0070d 100644 --- a/drivers/pci/controller/dwc/Makefile +++ b/drivers/pci/controller/dwc/Makefile @@ -28,5 +28,6 @@ obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o # depending on whether ACPI, the DT driver, or both are enabled. ifdef CONFIG_PCI +obj-$(CONFIG_ARM64) += pcie-al.o obj-$(CONFIG_ARM64) += pcie-hisi.o endif diff --git a/drivers/pci/controller/dwc/pcie-al.c b/drivers/pci/controller/dwc/pcie-al.c new file mode 100644 index 000000000000..65a9776c12be --- /dev/null +++ b/drivers/pci/controller/dwc/pcie-al.c @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PCIe host controller driver for Amazon's Annapurna Labs IP (used in chips + * such as Graviton and Alpine) + * + * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Author: Jonathan Chocron <jonnyc@amazon.com> + */ + +#include <linux/pci.h> +#include <linux/pci-ecam.h> +#include <linux/pci-acpi.h> +#include "../../pci.h" + +#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) + +struct al_pcie_acpi { + void __iomem *dbi_base; +}; + +static void __iomem *al_pcie_map_bus(struct pci_bus *bus, unsigned int devfn, + int where) +{ + struct pci_config_window *cfg = bus->sysdata; + struct al_pcie_acpi *pcie = cfg->priv; + void __iomem *dbi_base = pcie->dbi_base; + + if (bus->number == cfg->busr.start) { + /* + * The DW PCIe core doesn't filter out transactions to other + * devices/functions on the primary bus num, so we do this here. + */ + if (PCI_SLOT(devfn) > 0) + return NULL; + else + return dbi_base + where; + } + + return pci_ecam_map_bus(bus, devfn, where); +} + +static int al_pcie_init(struct pci_config_window *cfg) +{ + struct device *dev = cfg->parent; + struct acpi_device *adev = to_acpi_device(dev); + struct acpi_pci_root *root = acpi_driver_data(adev); + struct al_pcie_acpi *al_pcie; + struct resource *res; + int ret; + + al_pcie = devm_kzalloc(dev, sizeof(*al_pcie), GFP_KERNEL); + if (!al_pcie) + return -ENOMEM; + + res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL); + if (!res) + return -ENOMEM; + + ret = acpi_get_rc_resources(dev, "AMZN0001", root->segment, res); + if (ret) { + dev_err(dev, "can't get rc dbi base address for SEG %d\n", + root->segment); + return ret; + } + + dev_dbg(dev, "Root port dbi res: %pR\n", res); + + al_pcie->dbi_base = devm_pci_remap_cfg_resource(dev, res); + if (IS_ERR(al_pcie->dbi_base)) { + long err = PTR_ERR(al_pcie->dbi_base); + + dev_err(dev, "couldn't remap dbi base %pR (err:%ld)\n", + res, err); + return err; + } + + cfg->priv = al_pcie; + + return 0; +} + +struct pci_ecam_ops al_pcie_ops = { + .bus_shift = 20, + .init = al_pcie_init, + .pci_ops = { + .map_bus = al_pcie_map_bus, + .read = pci_generic_config_read, + .write = pci_generic_config_write, + } +}; + +#endif /* defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) */ diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h index 29efa09d686b..a73164c85e78 100644 --- a/include/linux/pci-ecam.h +++ b/include/linux/pci-ecam.h @@ -56,6 +56,7 @@ void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn, extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */ extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 */ extern struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */ +extern struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */ #endif #ifdef CONFIG_PCI_HOST_COMMON