diff mbox

[U-Boot,v2,3/6] Remove instances of phy_read/write

Message ID 1302040794-19837-4-git-send-email-afleming@freescale.com
State Accepted
Commit 09c04c20962afd25ce5797e263906f84de5b1f4c
Headers show

Commit Message

Andy Fleming April 5, 2011, 9:59 p.m. UTC 
There were a few files which were already using phy_read and phy_write
for their PHY function names.  It's only a few places, and the name
seems most appropriate for the high-level abstraction, so let's
rename the other versions to something more specific.

Also, uec_phy.c had a marvell_init function which I renamed to not
conflict with the one in marvell.c

Lastly, uec_phy.c was putting a space between the phy writing
function names, and the open paren, so I fixed that

Signed-off-by: Andy Fleming <afleming@freescale.com>
---
Fixed some sparse errors/warnings

 drivers/net/dm9000x.c  |   18 +++---
 drivers/net/enc28j60.c |   24 ++++----
 drivers/net/uli526x.c  |   24 ++++----
 drivers/qe/uec.c       |    3 -
 drivers/qe/uec_phy.c   |  145 ++++++++++++++++++++++++------------------------
 5 files changed, 107 insertions(+), 107 deletions(-)

Comments

Detlev Zundel April 6, 2011, 12:32 p.m. UTC | #1 
Hi Andy,

> There were a few files which were already using phy_read and phy_write
> for their PHY function names.  It's only a few places, and the name
> seems most appropriate for the high-level abstraction, so let's
> rename the other versions to something more specific.
>
> Also, uec_phy.c had a marvell_init function which I renamed to not
> conflict with the one in marvell.c
>
> Lastly, uec_phy.c was putting a space between the phy writing
> function names, and the open paren, so I fixed that
>
> Signed-off-by: Andy Fleming <afleming@freescale.com>

I already gave my

Acked-by: Detlev Zundel <dzu@denx.de>

on this patch.

Cheers
  Detlev
diff mbox

Patch

diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 709f67a..b5c5573 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -110,8 +110,8 @@  static board_info_t dm9000_info;
 
 /* function declaration ------------------------------------- */
 static int dm9000_probe(void);
-static u16 phy_read(int);
-static void phy_write(int, u16);
+static u16 dm9000_phy_read(int);
+static void dm9000_phy_write(int, u16);
 static u8 DM9000_ior(int);
 static void DM9000_iow(int reg, u8 value);
 
@@ -361,7 +361,7 @@  static int dm9000_init(struct eth_device *dev, bd_t *bd)
 	DM9000_iow(DM9000_IMR, IMR_PAR);
 
 	i = 0;
-	while (!(phy_read(1) & 0x20)) {	/* autonegation complete bit */
+	while (!(dm9000_phy_read(1) & 0x20)) {	/* autonegation complete bit */
 		udelay(1000);
 		i++;
 		if (i == 10000) {
@@ -371,7 +371,7 @@  static int dm9000_init(struct eth_device *dev, bd_t *bd)
 	}
 
 	/* see what we've got */
-	lnk = phy_read(17) >> 12;
+	lnk = dm9000_phy_read(17) >> 12;
 	printf("operating at ");
 	switch (lnk) {
 	case 1:
@@ -445,7 +445,7 @@  static void dm9000_halt(struct eth_device *netdev)
 	DM9000_DBG("%s\n", __func__);
 
 	/* RESET devie */
-	phy_write(0, 0x8000);	/* PHY RESET */
+	dm9000_phy_write(0, 0x8000);	/* PHY RESET */
 	DM9000_iow(DM9000_GPR, 0x01);	/* Power-Down PHY */
 	DM9000_iow(DM9000_IMR, 0x80);	/* Disable all interrupt */
 	DM9000_iow(DM9000_RCR, 0x00);	/* Disable RX */
@@ -581,7 +581,7 @@  DM9000_iow(int reg, u8 value)
    Read a word from phyxcer
 */
 static u16
-phy_read(int reg)
+dm9000_phy_read(int reg)
 {
 	u16 val;
 
@@ -593,7 +593,7 @@  phy_read(int reg)
 	val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
 
 	/* The read data keeps on REG_0D & REG_0E */
-	DM9000_DBG("phy_read(0x%x): 0x%x\n", reg, val);
+	DM9000_DBG("dm9000_phy_read(0x%x): 0x%x\n", reg, val);
 	return val;
 }
 
@@ -601,7 +601,7 @@  phy_read(int reg)
    Write a word to phyxcer
 */
 static void
-phy_write(int reg, u16 value)
+dm9000_phy_write(int reg, u16 value)
 {
 
 	/* Fill the phyxcer register into REG_0C */
@@ -613,7 +613,7 @@  phy_write(int reg, u16 value)
 	DM9000_iow(DM9000_EPCR, 0xa);	/* Issue phyxcer write command */
 	udelay(500);			/* Wait write complete */
 	DM9000_iow(DM9000_EPCR, 0x0);	/* Clear phyxcer write command */
-	DM9000_DBG("phy_write(reg:0x%x, value:0x%x)\n", reg, value);
+	DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value);
 }
 
 int dm9000_initialize(bd_t *bis)
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 6c161b6..d55cacd 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -314,7 +314,7 @@  static void enc_release_bus(enc_dev_t *enc)
 /*
  * Read PHY register
  */
-static u16 phy_read(enc_dev_t *enc, const u8 addr)
+static u16 enc_phy_read(enc_dev_t *enc, const u8 addr)
 {
 	uint64_t etime;
 	u8 status;
@@ -339,7 +339,7 @@  static u16 phy_read(enc_dev_t *enc, const u8 addr)
 /*
  * Write PHY register
  */
-static void phy_write(enc_dev_t *enc, const u8 addr, const u16 data)
+static void enc_phy_write(enc_dev_t *enc, const u8 addr, const u16 data)
 {
 	uint64_t etime;
 	u8 status;
@@ -374,7 +374,7 @@  static int enc_phy_link_wait(enc_dev_t *enc)
 
 #ifdef CONFIG_ENC_SILENTLINK
 	/* check if we have a link, then just return */
-	status = phy_read(enc, PHY_REG_PHSTAT1);
+	status = enc_phy_read(enc, PHY_REG_PHSTAT1);
 	if (status & ENC_PHSTAT1_LLSTAT)
 		return 0;
 #endif
@@ -382,10 +382,10 @@  static int enc_phy_link_wait(enc_dev_t *enc)
 	/* wait for link with 1 second timeout */
 	etime = get_ticks() + get_tbclk();
 	while (get_ticks() <= etime) {
-		status = phy_read(enc, PHY_REG_PHSTAT1);
+		status = enc_phy_read(enc, PHY_REG_PHSTAT1);
 		if (status & ENC_PHSTAT1_LLSTAT) {
 			/* now we have a link */
-			status = phy_read(enc, PHY_REG_PHSTAT2);
+			status = enc_phy_read(enc, PHY_REG_PHSTAT2);
 			duplex = (status & ENC_PHSTAT2_DPXSTAT) ? 1 : 0;
 			printf("%s: link up, 10Mbps %s-duplex\n",
 				enc->dev->name, duplex ? "full" : "half");
@@ -678,8 +678,8 @@  static int enc_setup(enc_dev_t *enc)
 	enc->bank = 0xff;	/* invalidate current bank in enc28j60 */
 
 	/* verify PHY identification */
-	phid1 = phy_read(enc, PHY_REG_PHID1);
-	phid2 = phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK;
+	phid1 = enc_phy_read(enc, PHY_REG_PHID1);
+	phid2 = enc_phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK;
 	if (phid1 != ENC_PHID1_VALUE || phid2 != ENC_PHID2_VALUE) {
 		printf("%s: failed to identify PHY. Found %04x:%04x\n",
 			enc->dev->name, phid1, phid2);
@@ -694,7 +694,7 @@  static int enc_setup(enc_dev_t *enc)
 	 * Prevent automatic loopback of data beeing transmitted by setting
 	 * ENC_PHCON2_HDLDIS
 	 */
-	phy_write(enc, PHY_REG_PHCON2, (1<<8));
+	enc_phy_write(enc, PHY_REG_PHCON2, (1<<8));
 
 	/*
 	 * LEDs configuration
@@ -702,10 +702,10 @@  static int enc_setup(enc_dev_t *enc)
 	 * LEDB: LBCFG = 0111 -> display TX & RX activity
 	 * STRCH = 1 -> LED pulses
 	 */
-	phy_write(enc, PHY_REG_PHLCON, 0x0472);
+	enc_phy_write(enc, PHY_REG_PHLCON, 0x0472);
 
 	/* Reset PDPXMD-bit => half duplex */
-	phy_write(enc, PHY_REG_PHCON1, 0);
+	enc_phy_write(enc, PHY_REG_PHCON1, 0);
 
 #ifdef CONFIG_USE_IRQ
 	/* enable interrupts */
@@ -771,7 +771,7 @@  int enc_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
 		enc_release_bus(enc);
 		return -1;
 	}
-	*value = phy_read(enc, reg);
+	*value = enc_phy_read(enc, reg);
 	enc_release_bus(enc);
 	return 0;
 }
@@ -796,7 +796,7 @@  int enc_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
 		enc_release_bus(enc);
 		return -1;
 	}
-	phy_write(enc, reg, value);
+	enc_phy_write(enc, reg, value);
 	enc_release_bus(enc);
 	return 0;
 }
diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c
index a4624e1..5933bdd 100644
--- a/drivers/net/uli526x.c
+++ b/drivers/net/uli526x.c
@@ -175,9 +175,9 @@  static u16 read_srom_word(long, int);
 static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
 static void allocate_rx_buffer(struct uli526x_board_info *);
 static void update_cr6(u32, unsigned long);
-static u16 phy_read(unsigned long, u8, u8, u32);
+static u16 uli_phy_read(unsigned long, u8, u8, u32);
 static u16 phy_readby_cr10(unsigned long, u8, u8);
-static void phy_write(unsigned long, u8, u8, u16, u32);
+static void uli_phy_write(unsigned long, u8, u8, u16, u32);
 static void phy_writeby_cr10(unsigned long, u8, u8, u16);
 static void phy_write_1bit(unsigned long, u32, u32);
 static u16 phy_read_1bit(unsigned long, u32);
@@ -349,7 +349,7 @@  static void uli526x_disable(struct eth_device *dev)
 		/* Reset & stop ULI526X board */
 		outl(ULI526X_RESET, db->ioaddr + DCR0);
 		udelay(5);
-		phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+		uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
 
 		/* reset the board */
 		db->cr6_data &= ~(CR6_RXSC | CR6_TXSC);	/* Disable Tx/Rx */
@@ -385,7 +385,7 @@  static void uli526x_init(struct eth_device *dev)
 	db->tx_packet_cnt = 0;
 	for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) {
 		/* peer add */
-		phy_value = phy_read(db->ioaddr, phy_tmp, 3, db->chip_id);
+		phy_value = uli_phy_read(db->ioaddr, phy_tmp, 3, db->chip_id);
 		if (phy_value != 0xffff && phy_value != 0) {
 			db->phy_addr = phy_tmp;
 			break;
@@ -404,10 +404,10 @@  static void uli526x_init(struct eth_device *dev)
 
 	if (!(inl(db->ioaddr + DCR12) & 0x8)) {
 		/* Phyxcer capability setting */
-		phy_reg_reset = phy_read(db->ioaddr,
+		phy_reg_reset = uli_phy_read(db->ioaddr,
 			db->phy_addr, 0, db->chip_id);
 		phy_reg_reset = (phy_reg_reset | 0x8000);
-		phy_write(db->ioaddr, db->phy_addr, 0,
+		uli_phy_write(db->ioaddr, db->phy_addr, 0,
 			phy_reg_reset, db->chip_id);
 		udelay(500);
 
@@ -781,7 +781,8 @@  static void uli526x_set_phyxcer(struct uli526x_board_info *db)
 	u16 phy_reg;
 
 	/* Phyxcer capability setting */
-	phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+	phy_reg = uli_phy_read(db->ioaddr,
+			db->phy_addr, 4, db->chip_id) & ~0x01e0;
 
 	if (db->media_mode & ULI526X_AUTO) {
 		/* AUTO Mode */
@@ -802,10 +803,10 @@  static void uli526x_set_phyxcer(struct uli526x_board_info *db)
 		phy_reg |= db->PHY_reg4;
 		db->media_mode |= ULI526X_AUTO;
 	}
-	phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+	uli_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
 
 	/* Restart Auto-Negotiation */
-	phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+	uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
 	udelay(50);
 }
 
@@ -813,7 +814,7 @@  static void uli526x_set_phyxcer(struct uli526x_board_info *db)
  *	Write a word to Phy register
  */
 
-static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+static void uli_phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
 	u16 phy_data, u32 chip_id)
 {
 	u16 i;
@@ -862,7 +863,8 @@  static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
  *	Read a word data from phy register
  */
 
-static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+static u16 uli_phy_read(unsigned long iobase, u8 phy_addr, u8 offset,
+			u32 chip_id)
 {
 	int i;
 	u16 phy_data;
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 282ab23..81febd6 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -67,9 +67,6 @@  static uec_info_t uec_info[] = {
 
 static struct eth_device *devlist[MAXCONTROLLERS];
 
-u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
-void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
-
 static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
 {
 	uec_t		*uec_regs;
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 55c2622..c83ca4b 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -121,8 +121,8 @@  static int gbit_config_aneg (struct uec_mii_info *mii_info);
 static int genmii_config_aneg (struct uec_mii_info *mii_info);
 static int genmii_update_link (struct uec_mii_info *mii_info);
 static int genmii_read_status (struct uec_mii_info *mii_info);
-u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
-void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
+u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum);
+void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val);
 
 /* Write value to the PHY for this device to the register at regnum, */
 /* waiting until the write is done before it returns.  All PHY */
@@ -242,7 +242,7 @@  static void config_genmii_advert (struct uec_mii_info *mii_info)
 	advertise = mii_info->advertising;
 
 	/* Setup standard advertisement */
-	adv = phy_read (mii_info, MII_ADVERTISE);
+	adv = uec_phy_read(mii_info, MII_ADVERTISE);
 	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 	if (advertise & ADVERTISED_10baseT_Half)
 		adv |= ADVERTISE_10HALF;
@@ -252,7 +252,7 @@  static void config_genmii_advert (struct uec_mii_info *mii_info)
 		adv |= ADVERTISE_100HALF;
 	if (advertise & ADVERTISED_100baseT_Full)
 		adv |= ADVERTISE_100FULL;
-	phy_write (mii_info, MII_ADVERTISE, adv);
+	uec_phy_write(mii_info, MII_ADVERTISE, adv);
 }
 
 static void genmii_setup_forced (struct uec_mii_info *mii_info)
@@ -260,7 +260,7 @@  static void genmii_setup_forced (struct uec_mii_info *mii_info)
 	u16 ctrl;
 	u32 features = mii_info->phyinfo->features;
 
-	ctrl = phy_read (mii_info, MII_BMCR);
+	ctrl = uec_phy_read(mii_info, MII_BMCR);
 
 	ctrl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 |
 		  BMCR_SPEED1000 | BMCR_ANENABLE);
@@ -290,7 +290,7 @@  static void genmii_setup_forced (struct uec_mii_info *mii_info)
 		break;
 	}
 
-	phy_write (mii_info, MII_BMCR, ctrl);
+	uec_phy_write(mii_info, MII_BMCR, ctrl);
 }
 
 /* Enable and Restart Autonegotiation */
@@ -298,9 +298,9 @@  static void genmii_restart_aneg (struct uec_mii_info *mii_info)
 {
 	u16 ctl;
 
-	ctl = phy_read (mii_info, MII_BMCR);
+	ctl = uec_phy_read(mii_info, MII_BMCR);
 	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
-	phy_write (mii_info, MII_BMCR, ctl);
+	uec_phy_write(mii_info, MII_BMCR, ctl);
 }
 
 static int gbit_config_aneg (struct uec_mii_info *mii_info)
@@ -313,14 +313,14 @@  static int gbit_config_aneg (struct uec_mii_info *mii_info)
 		config_genmii_advert (mii_info);
 		advertise = mii_info->advertising;
 
-		adv = phy_read (mii_info, MII_CTRL1000);
+		adv = uec_phy_read(mii_info, MII_CTRL1000);
 		adv &= ~(ADVERTISE_1000FULL |
 			 ADVERTISE_1000HALF);
 		if (advertise & SUPPORTED_1000baseT_Half)
 			adv |= ADVERTISE_1000HALF;
 		if (advertise & SUPPORTED_1000baseT_Full)
 			adv |= ADVERTISE_1000FULL;
-		phy_write (mii_info, MII_CTRL1000, adv);
+		uec_phy_write(mii_info, MII_CTRL1000, adv);
 
 		/* Start/Restart aneg */
 		genmii_restart_aneg (mii_info);
@@ -335,13 +335,13 @@  static int marvell_config_aneg (struct uec_mii_info *mii_info)
 	/* The Marvell PHY has an errata which requires
 	 * that certain registers get written in order
 	 * to restart autonegotiation */
-	phy_write (mii_info, MII_BMCR, BMCR_RESET);
+	uec_phy_write(mii_info, MII_BMCR, BMCR_RESET);
 
-	phy_write (mii_info, 0x1d, 0x1f);
-	phy_write (mii_info, 0x1e, 0x200c);
-	phy_write (mii_info, 0x1d, 0x5);
-	phy_write (mii_info, 0x1e, 0);
-	phy_write (mii_info, 0x1e, 0x100);
+	uec_phy_write(mii_info, 0x1d, 0x1f);
+	uec_phy_write(mii_info, 0x1e, 0x200c);
+	uec_phy_write(mii_info, 0x1d, 0x5);
+	uec_phy_write(mii_info, 0x1e, 0);
+	uec_phy_write(mii_info, 0x1e, 0x100);
 
 	gbit_config_aneg (mii_info);
 
@@ -373,13 +373,13 @@  static int genmii_update_link (struct uec_mii_info *mii_info)
 	u16 status;
 
 	/* Status is read once to clear old link state */
-	phy_read (mii_info, MII_BMSR);
+	uec_phy_read(mii_info, MII_BMSR);
 
 	/*
 	 * Wait if the link is up, and autonegotiation is in progress
 	 * (ie - we're capable and it's not done)
 	 */
-	status = phy_read(mii_info, MII_BMSR);
+	status = uec_phy_read(mii_info, MII_BMSR);
 	if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE)
 	    && !(status & BMSR_ANEGCOMPLETE)) {
 		int i = 0;
@@ -395,7 +395,7 @@  static int genmii_update_link (struct uec_mii_info *mii_info)
 
 			i++;
 			udelay(1000);	/* 1 ms */
-			status = phy_read(mii_info, MII_BMSR);
+			status = uec_phy_read(mii_info, MII_BMSR);
 		}
 		mii_info->link = 1;
 	} else {
@@ -420,7 +420,7 @@  static int genmii_read_status (struct uec_mii_info *mii_info)
 		return err;
 
 	if (mii_info->autoneg) {
-		status = phy_read(mii_info, MII_STAT1000);
+		status = uec_phy_read(mii_info, MII_STAT1000);
 
 		if (status & (LPA_1000FULL | LPA_1000HALF)) {
 			mii_info->speed = SPEED_1000;
@@ -429,7 +429,7 @@  static int genmii_read_status (struct uec_mii_info *mii_info)
 			else
 				mii_info->duplex = DUPLEX_HALF;
 		} else {
-			status = phy_read(mii_info, MII_LPA);
+			status = uec_phy_read(mii_info, MII_LPA);
 
 			if (status & (LPA_10FULL | LPA_100FULL))
 				mii_info->duplex = DUPLEX_FULL;
@@ -463,25 +463,25 @@  static int bcm_init(struct uec_mii_info *mii_info)
 
 		/* Wait for aneg to complete. */
 		do
-			val = phy_read(mii_info, MII_BMSR);
+			val = uec_phy_read(mii_info, MII_BMSR);
 		while (--cnt && !(val & BMSR_ANEGCOMPLETE));
 
 		/* Set RDX clk delay. */
-		phy_write(mii_info, 0x18, 0x7 | (7 << 12));
+		uec_phy_write(mii_info, 0x18, 0x7 | (7 << 12));
 
-		val = phy_read(mii_info, 0x18);
+		val = uec_phy_read(mii_info, 0x18);
 		/* Set RDX-RXC skew. */
 		val |= (1 << 8);
 		val |= (7 | (7 << 12));
 		/* Write bits 14:0. */
 		val |= (1 << 15);
-		phy_write(mii_info, 0x18, val);
+		uec_phy_write(mii_info, 0x18, val);
 	}
 
 	 return 0;
 }
 
-static int marvell_init(struct uec_mii_info *mii_info)
+static int uec_marvell_init(struct uec_mii_info *mii_info)
 {
 	struct eth_device *edev = mii_info->dev;
 	uec_private_t *uec = edev->priv;
@@ -494,7 +494,7 @@  static int marvell_init(struct uec_mii_info *mii_info)
 	    iface == RGMII_TXID)) {
 		int temp;
 
-		temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
+		temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR);
 		if (iface == RGMII_ID) {
 			temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
 		} else if (iface == RGMII_RXID) {
@@ -504,14 +504,14 @@  static int marvell_init(struct uec_mii_info *mii_info)
 			temp &= ~MII_M1111_RX_DELAY;
 			temp |= MII_M1111_TX_DELAY;
 		}
-		phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
+		uec_phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
 
-		temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR);
+		temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_SR);
 		temp &= ~MII_M1111_HWCFG_MODE_MASK;
 		temp |= MII_M1111_HWCFG_MODE_RGMII;
-		phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
+		uec_phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
 
-		phy_write(mii_info, MII_BMCR, BMCR_RESET);
+		uec_phy_write(mii_info, MII_BMCR, BMCR_RESET);
 	}
 
 	return 0;
@@ -534,7 +534,7 @@  static int marvell_read_status (struct uec_mii_info *mii_info)
 	if (mii_info->autoneg && mii_info->link) {
 		int speed;
 
-		status = phy_read (mii_info, MII_M1011_PHY_SPEC_STATUS);
+		status = uec_phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
 
 		/* Get the duplexity */
 		if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
@@ -564,7 +564,7 @@  static int marvell_read_status (struct uec_mii_info *mii_info)
 static int marvell_ack_interrupt (struct uec_mii_info *mii_info)
 {
 	/* Clear the interrupts by reading the reg */
-	phy_read (mii_info, MII_M1011_IEVENT);
+	uec_phy_read(mii_info, MII_M1011_IEVENT);
 
 	return 0;
 }
@@ -572,9 +572,10 @@  static int marvell_ack_interrupt (struct uec_mii_info *mii_info)
 static int marvell_config_intr (struct uec_mii_info *mii_info)
 {
 	if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
-		phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
+		uec_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
 	else
-		phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
+		uec_phy_write(mii_info, MII_M1011_IMASK,
+				MII_M1011_IMASK_CLEAR);
 
 	return 0;
 }
@@ -582,13 +583,13 @@  static int marvell_config_intr (struct uec_mii_info *mii_info)
 static int dm9161_init (struct uec_mii_info *mii_info)
 {
 	/* Reset the PHY */
-	phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) |
+	uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) |
 		   BMCR_RESET);
 	/* PHY and MAC connect */
-	phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) &
+	uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) &
 		   ~BMCR_ISOLATE);
 
-	phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
+	uec_phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
 
 	config_genmii_advert (mii_info);
 	/* Start/restart aneg */
@@ -614,7 +615,7 @@  static int dm9161_read_status (struct uec_mii_info *mii_info)
 	/* If the link is up, read the speed and duplex
 	   If we aren't autonegotiating assume speeds are as set */
 	if (mii_info->autoneg && mii_info->link) {
-		status = phy_read (mii_info, MII_DM9161_SCSR);
+		status = uec_phy_read(mii_info, MII_DM9161_SCSR);
 		if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
 			mii_info->speed = SPEED_100;
 		else
@@ -632,7 +633,7 @@  static int dm9161_read_status (struct uec_mii_info *mii_info)
 static int dm9161_ack_interrupt (struct uec_mii_info *mii_info)
 {
 	/* Clear the interrupt by reading the reg */
-	phy_read (mii_info, MII_DM9161_INTR);
+	uec_phy_read(mii_info, MII_DM9161_INTR);
 
 	return 0;
 }
@@ -640,9 +641,9 @@  static int dm9161_ack_interrupt (struct uec_mii_info *mii_info)
 static int dm9161_config_intr (struct uec_mii_info *mii_info)
 {
 	if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
-		phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
+		uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
 	else
-		phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
+		uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
 
 	return 0;
 }
@@ -696,7 +697,7 @@  static int smsc_read_status (struct uec_mii_info *mii_info)
 	if (mii_info->autoneg && mii_info->link) {
 		int	val;
 
-		status = phy_read (mii_info, 0x1f);
+		status = uec_phy_read(mii_info, 0x1f);
 		val = (status & 0x1c) >> 2;
 
 		switch (val) {
@@ -751,7 +752,7 @@  static struct phy_info phy_info_marvell = {
 	.phy_id_mask = 0xffffff00,
 	.name = "Marvell 88E11x1",
 	.features = MII_GBIT_FEATURES,
-	.init = &marvell_init,
+	.init = &uec_marvell_init,
 	.config_aneg = &marvell_config_aneg,
 	.read_status = &marvell_read_status,
 	.ack_interrupt = &marvell_ack_interrupt,
@@ -804,12 +805,12 @@  static struct phy_info *phy_info[] = {
 	NULL
 };
 
-u16 phy_read (struct uec_mii_info *mii_info, u16 regnum)
+u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum)
 {
 	return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum);
 }
 
-void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val)
+void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val)
 {
 	mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val);
 }
@@ -825,11 +826,11 @@  struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
 	struct phy_info *theInfo = NULL;
 
 	/* Grab the bits from PHYIR1, and put them in the upper half */
-	phy_reg = phy_read (mii_info, MII_PHYSID1);
+	phy_reg = uec_phy_read(mii_info, MII_PHYSID1);
 	phy_ID = (phy_reg & 0xffff) << 16;
 
 	/* Grab the bits from PHYIR2, and put them in the lower half */
-	phy_reg = phy_read (mii_info, MII_PHYSID2);
+	phy_reg = uec_phy_read(mii_info, MII_PHYSID2);
 	phy_ID |= (phy_reg & 0xffff);
 
 	/* loop through all the known PHY types, and find one that */
@@ -869,39 +870,39 @@  void marvell_phy_interface_mode (struct eth_device *dev,
 
 	if (type == RGMII) {
 		if (speed == 100) {
-			phy_write (mii_info, 0x00, 0x9140);
-			phy_write (mii_info, 0x1d, 0x001f);
-			phy_write (mii_info, 0x1e, 0x200c);
-			phy_write (mii_info, 0x1d, 0x0005);
-			phy_write (mii_info, 0x1e, 0x0000);
-			phy_write (mii_info, 0x1e, 0x0100);
-			phy_write (mii_info, 0x09, 0x0e00);
-			phy_write (mii_info, 0x04, 0x01e1);
-			phy_write (mii_info, 0x00, 0x9140);
-			phy_write (mii_info, 0x00, 0x1000);
+			uec_phy_write(mii_info, 0x00, 0x9140);
+			uec_phy_write(mii_info, 0x1d, 0x001f);
+			uec_phy_write(mii_info, 0x1e, 0x200c);
+			uec_phy_write(mii_info, 0x1d, 0x0005);
+			uec_phy_write(mii_info, 0x1e, 0x0000);
+			uec_phy_write(mii_info, 0x1e, 0x0100);
+			uec_phy_write(mii_info, 0x09, 0x0e00);
+			uec_phy_write(mii_info, 0x04, 0x01e1);
+			uec_phy_write(mii_info, 0x00, 0x9140);
+			uec_phy_write(mii_info, 0x00, 0x1000);
 			udelay (100000);
-			phy_write (mii_info, 0x00, 0x2900);
-			phy_write (mii_info, 0x14, 0x0cd2);
-			phy_write (mii_info, 0x00, 0xa100);
-			phy_write (mii_info, 0x09, 0x0000);
-			phy_write (mii_info, 0x1b, 0x800b);
-			phy_write (mii_info, 0x04, 0x05e1);
-			phy_write (mii_info, 0x00, 0xa100);
-			phy_write (mii_info, 0x00, 0x2100);
+			uec_phy_write(mii_info, 0x00, 0x2900);
+			uec_phy_write(mii_info, 0x14, 0x0cd2);
+			uec_phy_write(mii_info, 0x00, 0xa100);
+			uec_phy_write(mii_info, 0x09, 0x0000);
+			uec_phy_write(mii_info, 0x1b, 0x800b);
+			uec_phy_write(mii_info, 0x04, 0x05e1);
+			uec_phy_write(mii_info, 0x00, 0xa100);
+			uec_phy_write(mii_info, 0x00, 0x2100);
 			udelay (1000000);
 		} else if (speed == 10) {
-			phy_write (mii_info, 0x14, 0x8e40);
-			phy_write (mii_info, 0x1b, 0x800b);
-			phy_write (mii_info, 0x14, 0x0c82);
-			phy_write (mii_info, 0x00, 0x8100);
+			uec_phy_write(mii_info, 0x14, 0x8e40);
+			uec_phy_write(mii_info, 0x1b, 0x800b);
+			uec_phy_write(mii_info, 0x14, 0x0c82);
+			uec_phy_write(mii_info, 0x00, 0x8100);
 			udelay (1000000);
 		}
 	}
 
 	/* handle 88e1111 rev.B2 erratum 5.6 */
 	if (mii_info->autoneg) {
-		status = phy_read (mii_info, MII_BMCR);
-		phy_write (mii_info, MII_BMCR, status | BMCR_ANENABLE);
+		status = uec_phy_read(mii_info, MII_BMCR);
+		uec_phy_write(mii_info, MII_BMCR, status | BMCR_ANENABLE);
 	}
 	/* now the B2 will correctly report autoneg completion status */
 }