Message ID | 1551402256-7815-1-git-send-email-jun.li@nxp.com |
---|---|
State | Superseded, archived |
Headers | show |
Series | [v2,1/2] dt-bindings: usb: add documentation for typec switch via GPIO | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | warning | "total: 0 errors, 1 warnings, 30 lines checked" |
On Fri, Mar 1, 2019 at 3:25 AM Jun Li <jun.li@nxp.com> wrote: > > This patch adds a simple typec switch driver which only needs > a GPIO to switch the super speed active channel according to > typec orientation. FWIW, Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> One minor below. > > Signed-off-by: Li Jun <jun.li@nxp.com> > --- > > Changes for v2: > - Use the correct head files for gpio api and of_device_id: > #include <linux/gpio/consumer.h> > #include <linux/mod_devicetable.h> > - Add driver dependency on GPIOLIB > > drivers/usb/typec/mux/Kconfig | 7 +++ > drivers/usb/typec/mux/Makefile | 1 + > drivers/usb/typec/mux/gpio-switch.c | 105 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 113 insertions(+) > > diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig > index 01ed0d5..27120e6 100644 > --- a/drivers/usb/typec/mux/Kconfig > +++ b/drivers/usb/typec/mux/Kconfig > @@ -9,4 +9,11 @@ config TYPEC_MUX_PI3USB30532 > Say Y or M if your system has a Pericom PI3USB30532 Type-C cross > switch / mux chip found on some devices with a Type-C port. > > +config TYPEC_SWITCH_GPIO > + tristate "Simple Super Speed Active Switch via GPIO" > + depends on GPIOLIB > + help > + Say Y or M if your system has a typec super speed channel > + switch via a simple GPIO control. > + > endmenu > diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile > index 1332e46..e29377c 100644 > --- a/drivers/usb/typec/mux/Makefile > +++ b/drivers/usb/typec/mux/Makefile > @@ -1,3 +1,4 @@ > # SPDX-License-Identifier: GPL-2.0 > > obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o > +obj-$(CONFIG_TYPEC_SWITCH_GPIO) += gpio-switch.o > diff --git a/drivers/usb/typec/mux/gpio-switch.c b/drivers/usb/typec/mux/gpio-switch.c > new file mode 100644 > index 0000000..b01844c > --- /dev/null > +++ b/drivers/usb/typec/mux/gpio-switch.c > @@ -0,0 +1,105 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/** > + * gpio-switch.c - typec switch via a simple GPIO control. If under any circumstances file will be renamed this become outdated. So, better not to include file name in the file. > + * > + * Copyright 2019 NXP > + * Author: Jun Li <jun.li@nxp.com> > + * > + */ > + > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/kernel.h> > +#include <linux/platform_device.h> > +#include <linux/gpio/consumer.h> > +#include <linux/mod_devicetable.h> > +#include <linux/usb/typec_mux.h> > + > +struct gpio_typec_switch { > + struct typec_switch sw; > + struct mutex lock; > + struct gpio_desc *ss_sel; > +}; > + > +static int switch_gpio_set(struct typec_switch *sw, > + enum typec_orientation orientation) > +{ > + struct gpio_typec_switch *gpio_sw = container_of(sw, > + struct gpio_typec_switch, sw); > + > + mutex_lock(&gpio_sw->lock); > + > + switch (orientation) { > + case TYPEC_ORIENTATION_NORMAL: > + gpiod_set_value_cansleep(gpio_sw->ss_sel, 1); > + break; > + case TYPEC_ORIENTATION_REVERSE: > + gpiod_set_value_cansleep(gpio_sw->ss_sel, 0); > + break; > + case TYPEC_ORIENTATION_NONE: > + break; > + } > + > + mutex_unlock(&gpio_sw->lock); > + > + return 0; > +} > + > +static int typec_switch_gpio_probe(struct platform_device *pdev) > +{ > + struct gpio_typec_switch *gpio_sw; > + struct device *dev = &pdev->dev; > + int ret; > + > + gpio_sw = devm_kzalloc(dev, sizeof(*gpio_sw), GFP_KERNEL); > + if (!gpio_sw) > + return -ENOMEM; > + > + platform_set_drvdata(pdev, gpio_sw); > + > + gpio_sw->sw.dev = dev; > + gpio_sw->sw.set = switch_gpio_set; > + mutex_init(&gpio_sw->lock); > + > + /* Get the super speed active channel selection GPIO */ > + gpio_sw->ss_sel = devm_gpiod_get(dev, NULL, GPIOD_OUT_LOW); > + if (IS_ERR(gpio_sw->ss_sel)) > + return PTR_ERR(gpio_sw->ss_sel); > + > + ret = typec_switch_register(&gpio_sw->sw); > + if (ret) { > + dev_err(dev, "Error registering typec switch: %d\n", ret); > + return ret; > + } > + > + return 0; > +} > + > +static int typec_switch_gpio_remove(struct platform_device *pdev) > +{ > + struct gpio_typec_switch *gpio_sw = platform_get_drvdata(pdev); > + > + typec_switch_unregister(&gpio_sw->sw); > + > + return 0; > +} > + > +static const struct of_device_id of_typec_switch_gpio_match[] = { > + { .compatible = "nxp,ptn36043" }, > + { /* Sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, of_typec_switch_gpio_match); > + > +static struct platform_driver typec_switch_gpio_driver = { > + .probe = typec_switch_gpio_probe, > + .remove = typec_switch_gpio_remove, > + .driver = { > + .name = "typec-switch-gpio", > + .of_match_table = of_typec_switch_gpio_match, > + }, > +}; > + > +module_platform_driver(typec_switch_gpio_driver); > +MODULE_LICENSE("GPL v2"); > +MODULE_DESCRIPTION("TypeC Super Speed Switch GPIO driver"); > +MODULE_AUTHOR("Jun Li <jun.li@nxp.com>"); > -- > 2.7.4 >
Hi Andy, > -----Original Message----- > From: Andy Shevchenko <andy.shevchenko@gmail.com> > Sent: 2019年3月3日 0:27 > To: Jun Li <jun.li@nxp.com> > Cc: robh+dt@kernel.org; heikki.krogerus@linux.intel.com; > gregkh@linuxfoundation.org; hdegoede@redhat.com; linux-usb@vger.kernel.org; > devicetree@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com> > Subject: Re: [PATCH v2 2/2] usb: typec: add typec switch via GPIO control > > On Fri, Mar 1, 2019 at 3:25 AM Jun Li <jun.li@nxp.com> wrote: > > > > This patch adds a simple typec switch driver which only needs a GPIO > > to switch the super speed active channel according to typec > > orientation. > > FWIW, > Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> > > One minor below. > > > > > Signed-off-by: Li Jun <jun.li@nxp.com> > > --- > > > > Changes for v2: > > - Use the correct head files for gpio api and of_device_id: > > #include <linux/gpio/consumer.h> > > #include <linux/mod_devicetable.h> > > - Add driver dependency on GPIOLIB > > > > drivers/usb/typec/mux/Kconfig | 7 +++ > > drivers/usb/typec/mux/Makefile | 1 + > > drivers/usb/typec/mux/gpio-switch.c | 105 > > ++++++++++++++++++++++++++++++++++++ > > 3 files changed, 113 insertions(+) > > > > diff --git a/drivers/usb/typec/mux/Kconfig > > b/drivers/usb/typec/mux/Kconfig index 01ed0d5..27120e6 100644 > > --- a/drivers/usb/typec/mux/Kconfig > > +++ b/drivers/usb/typec/mux/Kconfig > > @@ -9,4 +9,11 @@ config TYPEC_MUX_PI3USB30532 > > Say Y or M if your system has a Pericom PI3USB30532 Type-C cross > > switch / mux chip found on some devices with a Type-C port. > > > > +config TYPEC_SWITCH_GPIO > > + tristate "Simple Super Speed Active Switch via GPIO" > > + depends on GPIOLIB > > + help > > + Say Y or M if your system has a typec super speed channel > > + switch via a simple GPIO control. > > + > > endmenu > > diff --git a/drivers/usb/typec/mux/Makefile > > b/drivers/usb/typec/mux/Makefile index 1332e46..e29377c 100644 > > --- a/drivers/usb/typec/mux/Makefile > > +++ b/drivers/usb/typec/mux/Makefile > > @@ -1,3 +1,4 @@ > > # SPDX-License-Identifier: GPL-2.0 > > > > obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o > > +obj-$(CONFIG_TYPEC_SWITCH_GPIO) += gpio-switch.o > > diff --git a/drivers/usb/typec/mux/gpio-switch.c > > b/drivers/usb/typec/mux/gpio-switch.c > > new file mode 100644 > > index 0000000..b01844c > > --- /dev/null > > +++ b/drivers/usb/typec/mux/gpio-switch.c > > @@ -0,0 +1,105 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/** > > > + * gpio-switch.c - typec switch via a simple GPIO control. > > If under any circumstances file will be renamed this become outdated. > So, better not to include file name in the file. OK, I will remove this. Thanks Li Jun > > > + * > > + * Copyright 2019 NXP > > + * Author: Jun Li <jun.li@nxp.com> > > + * > > + */ > > + > > +#include <linux/module.h> > > +#include <linux/mutex.h> > > +#include <linux/kernel.h> > > +#include <linux/platform_device.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/mod_devicetable.h> > > +#include <linux/usb/typec_mux.h> > > + > > +struct gpio_typec_switch { > > + struct typec_switch sw; > > + struct mutex lock; > > + struct gpio_desc *ss_sel; > > +}; > > + > > +static int switch_gpio_set(struct typec_switch *sw, > > + enum typec_orientation orientation) { > > + struct gpio_typec_switch *gpio_sw = container_of(sw, > > + struct gpio_typec_switch, sw); > > + > > + mutex_lock(&gpio_sw->lock); > > + > > + switch (orientation) { > > + case TYPEC_ORIENTATION_NORMAL: > > + gpiod_set_value_cansleep(gpio_sw->ss_sel, 1); > > + break; > > + case TYPEC_ORIENTATION_REVERSE: > > + gpiod_set_value_cansleep(gpio_sw->ss_sel, 0); > > + break; > > + case TYPEC_ORIENTATION_NONE: > > + break; > > + } > > + > > + mutex_unlock(&gpio_sw->lock); > > + > > + return 0; > > +} > > + > > +static int typec_switch_gpio_probe(struct platform_device *pdev) { > > + struct gpio_typec_switch *gpio_sw; > > + struct device *dev = &pdev->dev; > > + int ret; > > + > > + gpio_sw = devm_kzalloc(dev, sizeof(*gpio_sw), GFP_KERNEL); > > + if (!gpio_sw) > > + return -ENOMEM; > > + > > + platform_set_drvdata(pdev, gpio_sw); > > + > > + gpio_sw->sw.dev = dev; > > + gpio_sw->sw.set = switch_gpio_set; > > + mutex_init(&gpio_sw->lock); > > + > > + /* Get the super speed active channel selection GPIO */ > > + gpio_sw->ss_sel = devm_gpiod_get(dev, NULL, GPIOD_OUT_LOW); > > + if (IS_ERR(gpio_sw->ss_sel)) > > + return PTR_ERR(gpio_sw->ss_sel); > > + > > + ret = typec_switch_register(&gpio_sw->sw); > > + if (ret) { > > + dev_err(dev, "Error registering typec switch: %d\n", ret); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static int typec_switch_gpio_remove(struct platform_device *pdev) { > > + struct gpio_typec_switch *gpio_sw = > > +platform_get_drvdata(pdev); > > + > > + typec_switch_unregister(&gpio_sw->sw); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id of_typec_switch_gpio_match[] = { > > + { .compatible = "nxp,ptn36043" }, > > + { /* Sentinel */ } > > +}; > > +MODULE_DEVICE_TABLE(of, of_typec_switch_gpio_match); > > + > > +static struct platform_driver typec_switch_gpio_driver = { > > + .probe = typec_switch_gpio_probe, > > + .remove = typec_switch_gpio_remove, > > + .driver = { > > + .name = "typec-switch-gpio", > > + .of_match_table = of_typec_switch_gpio_match, > > + }, > > +}; > > + > > +module_platform_driver(typec_switch_gpio_driver); > > +MODULE_LICENSE("GPL v2"); > > +MODULE_DESCRIPTION("TypeC Super Speed Switch GPIO driver"); > > +MODULE_AUTHOR("Jun Li <jun.li@nxp.com>"); > > -- > > 2.7.4 > > > > > -- > With Best Regards, > Andy Shevchenko
diff --git a/Documentation/devicetree/bindings/usb/typec-switch-gpio.txt b/Documentation/devicetree/bindings/usb/typec-switch-gpio.txt new file mode 100644 index 0000000..4ef76cf --- /dev/null +++ b/Documentation/devicetree/bindings/usb/typec-switch-gpio.txt @@ -0,0 +1,30 @@ +Typec orientation switch via a GPIO +----------------------------------- + +Required properties: +- compatible: should be set one of following: + - "nxp,ptn36043" for NXP Type-C SuperSpeed active switch. + +- gpios: the GPIO used to switch the super speed active channel, + GPIO_ACTIVE_HIGH: GPIO state high for cc1; + GPIO_ACTIVE_LOW: GPIO state low for cc1. +- orientation-switch: must be present. + +Required sub-node: +- port: specify the remote endpoint of typec switch consumer. + +Example: + +ptn36043 { + compatible = "nxp,ptn36043"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ss_sel>; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + orientation-switch; + + port { + usb3_data_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; +};
Some typec super speed active channel switch can be controlled via a GPIO, this binding can be used to specify the switch node by a GPIO and the remote endpoint of its consumre. Signed-off-by: Li Jun <jun.li@nxp.com> --- No change on v2 for this patch. .../devicetree/bindings/usb/typec-switch-gpio.txt | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+)