| Message ID | 20181130092336.5419-1-fb@ltec.ch |
|---|---|
| State | Accepted |
| Commit | 2aadff0feb2d01917c785bf8544ee0f3c9d7d8a7 |
| Delegated to: | Tom Rini |
| Headers | show |
| Series | [U-Boot] arm: am335x-pdu001: Enable CONFIG_BLK and CONFIG_DM_MMC | expand |
On Fri, Nov 30, 2018 at 10:23:36AM +0100, Felix Brack wrote: > This patch enables CONFIG_BLK as well as CONFIG_DM_MMC for the PDU001 > board. It depends on Patrice Chotard's patch 'power: regulator: denied > disable on always-on regulator' which prevents power cycling the vmmc > supply. Without this patch the board will not boot as vmmc is > unfortunately used by other board components, not just eMMC and micro SD > card. Furthermore my patch 'dts: am335x-pdu001: Fix polarity of card > detection input' is required to boot from external micro SD card. Without > this patch no SD card will be detected and hence booting will fail. > > Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Tom Rini <trini@konsulko.com>
On Fri, Nov 30, 2018 at 10:23:36AM +0100, Felix Brack wrote: > This patch enables CONFIG_BLK as well as CONFIG_DM_MMC for the PDU001 > board. It depends on Patrice Chotard's patch 'power: regulator: denied > disable on always-on regulator' which prevents power cycling the vmmc > supply. Without this patch the board will not boot as vmmc is > unfortunately used by other board components, not just eMMC and micro SD > card. Furthermore my patch 'dts: am335x-pdu001: Fix polarity of card > detection input' is required to boot from external micro SD card. Without > this patch no SD card will be detected and hence booting will fail. > > Signed-off-by: Felix Brack <fb@ltec.ch> > Reviewed-by: Tom Rini <trini@konsulko.com> Applied to u-boot/master, thanks!
diff --git a/arch/arm/dts/am335x-pdu001-u-boot.dtsi b/arch/arm/dts/am335x-pdu001-u-boot.dtsi index fbb6a3ff6b..84a07bdef4 100644 --- a/arch/arm/dts/am335x-pdu001-u-boot.dtsi +++ b/arch/arm/dts/am335x-pdu001-u-boot.dtsi @@ -29,10 +29,18 @@ u-boot,dm-pre-reloc; }; +&mmc1 { + u-boot,dm-pre-reloc; +}; + &mmc1_pins { u-boot,dm-pre-reloc; }; +&mmc2 { + u-boot,dm-pre-reloc; +}; + &mmc2_pins { u-boot,dm-pre-reloc; }; diff --git a/configs/am335x_pdu001_defconfig b/configs/am335x_pdu001_defconfig index 065efca633..3cb38aff6e 100644 --- a/configs/am335x_pdu001_defconfig +++ b/configs/am335x_pdu001_defconfig @@ -18,6 +18,7 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " @@ -37,6 +38,10 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-pdu001" CONFIG_SPL_DM=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y +CONFIG_BLK=y +CONFIG_SPL_BLK=y +CONFIG_DM_MMC=y +CONFIG_SPL_DM_MMC=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_SDHCI=y CONFIG_PINCTRL=y
This patch enables CONFIG_BLK as well as CONFIG_DM_MMC for the PDU001 board. It depends on Patrice Chotard's patch 'power: regulator: denied disable on always-on regulator' which prevents power cycling the vmmc supply. Without this patch the board will not boot as vmmc is unfortunately used by other board components, not just eMMC and micro SD card. Furthermore my patch 'dts: am335x-pdu001: Fix polarity of card detection input' is required to boot from external micro SD card. Without this patch no SD card will be detected and hence booting will fail. Signed-off-by: Felix Brack <fb@ltec.ch> --- arch/arm/dts/am335x-pdu001-u-boot.dtsi | 8 ++++++++ configs/am335x_pdu001_defconfig | 5 +++++ 2 files changed, 13 insertions(+)