diff mbox series

[v6,1/2] dt-bindings: hwmon: Add ina3221 documentation

Message ID 20180927194910.18464-2-nicoleotsuka@gmail.com
State Superseded, archived
Headers show
Series Add an initial DT binding doc for ina3221 | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Nicolin Chen Sept. 27, 2018, 7:49 p.m. UTC
Texas Instruments INA3221 is a triple-channel shunt and bus
voltage monitor. This patch adds a DT binding doc for it.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
Changelog
v5->v6:
 * Removed status property as no need to explicitly list it.
 * Combined all examples into a complete one.
v4->v5:
 * Replaced "input-id" with "reg" and added address-cells and size-cells
 * Replaced "input-label" with "label"
 * Replaced "shunt-resistor" with "shunt-resistor-micro-ohms"
v3->v4:
 * Removed the attempt of putting labels in the node names
 * Added a new optional label property in the child node
 * Updated examples accordingly
v2->v3:
 * Added a simple subject in the line 1
 * Fixed the shunt resistor value in the example
v1->v2:
 * Dropped channel name properties
 * Added child node definitions.
 * * Added shunt resistor property in the child node
 * * Added status property to indicate connection status
 * * Changed to use child node name as the label of input source

 .../devicetree/bindings/hwmon/ina3221.txt     | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/ina3221.txt

Comments

Rob Herring Sept. 27, 2018, 8:38 p.m. UTC | #1
On Thu, Sep 27, 2018 at 2:49 PM Nicolin Chen <nicoleotsuka@gmail.com> wrote:
>
> Texas Instruments INA3221 is a triple-channel shunt and bus
> voltage monitor. This patch adds a DT binding doc for it.
>
> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
> ---
> Changelog
> v5->v6:
>  * Removed status property as no need to explicitly list it.
>  * Combined all examples into a complete one.

Sorry, I meant combine the parent and child nodes into one. Showing 3
children is perfectly fine as the device has 3 channels.

Rob
Nicolin Chen Sept. 27, 2018, 8:44 p.m. UTC | #2
On Thu, Sep 27, 2018 at 03:38:44PM -0500, Rob Herring wrote:
> On Thu, Sep 27, 2018 at 2:49 PM Nicolin Chen <nicoleotsuka@gmail.com> wrote:
> >
> > Texas Instruments INA3221 is a triple-channel shunt and bus
> > voltage monitor. This patch adds a DT binding doc for it.
> >
> > Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
> > ---
> > Changelog
> > v5->v6:
> >  * Removed status property as no need to explicitly list it.
> >  * Combined all examples into a complete one.
> 
> Sorry, I meant combine the parent and child nodes into one. Showing 3
> children is perfectly fine as the device has 3 channels.

Sending v7.

Thanks
Nicolin
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt
new file mode 100644
index 000000000000..f2dd3137bf1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt
@@ -0,0 +1,40 @@ 
+Texas Instruments INA3221 Device Tree Bindings
+
+1) ina3221 node
+  Required properties:
+  - compatible: Must be "ti,ina3221"
+  - reg: I2C address
+
+  Optional properties:
+  = The node contains optional child nodes for three channels =
+  = Each child node describes the information of input source =
+
+  - #address-cells: Required only if a child node is present. Must be 1.
+  - #size-cells: Required only if a child node is present. Must be 0.
+
+  Example:
+
+  ina3221@40 {
+          compatible = "ti,ina3221";
+          reg = <0x40>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          [ child node definitions... ]
+  };
+
+2) child nodes
+  Required properties:
+  - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221
+
+  Optional properties:
+  - label: Name of the input source
+  - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm
+
+  Example:
+
+  input@0 {
+          reg = <0x0>;
+          label = "VDD_5V";
+          shunt-resistor-micro-ohms = <5000>;
+  };