Message ID | 20180828111944.5956-5-jonas.gorski@gmail.com |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | mtd: bcm63xxpart: add device tree support | expand |
On 4 September 2018 at 02:30, Rob Herring <robh@kernel.org> wrote: > On Tue, Aug 28, 2018 at 01:19:43PM +0200, Jonas Gorski wrote: >> Describe how to use the BCM963XX ImageTag format in a mixed flash layout >> environment. >> >> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> >> --- >> .../mtd/partitions/brcm,bcm963xx-imagetag.txt | 78 ++++++++++++++++++++++ >> 1 file changed, 78 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt >> >> diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt >> new file mode 100644 >> index 000000000000..f4a444d69d9a >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt >> @@ -0,0 +1,78 @@ >> +Broadcom BCM963XX ImageTag Partition Container >> +============================================== >> + >> +Some Broadcom BCM63XX SoC based devices contain additional, non discoverable >> +partitions or non standard bootloader partition sizes. For these a mixed layout >> +needs to be used with an explicit firmware partition. >> + >> +The BCM963XX ImageTag is a simple firmware header describing the offsets and >> +sizes of the rootfs and kernel parts contained in the firmware. >> + >> +Required properties: >> +- compatible : must be "brcm,bcm963xx-imagetag" >> + >> +Examples: >> + >> +flash@1e000000 { >> + compatible = "cfi-flash"; >> + reg = <0x1e000000 0x2000000>; >> + bank-width = <2>; >> + >> + partitions { >> + compatible = "fixed-partitions"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + cfe@0 { >> + reg = <0x0 0x10000>; >> + read-only; >> + }; >> + >> + firmware@10000 { >> + reg = <0x10000 0x7d0000>; >> + compatible = "brcm,bcm963xx-imagetag"; >> + }; >> + >> + caldata@7e0000 { >> + reg = <0x7e0000 0x10000>; >> + read-only; >> + }; >> + >> + nvram@7f0000 { >> + reg = <0x7f0000 0x10000>; >> + }; >> + }; >> +}; >> + >> + >> +flash@1e000000 { >> + compatible = "cfi-flash"; >> + reg = <0x1e000000 0x2000000>; >> + bank-width = <2>; >> + >> + partitions { >> + compatible = "fixed-partitions"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + /* >> + * Some devices use a flash chip with 64k erase blocks, some >> + * use one with 128k erase blocks, so the vendor decided to >> + * always use 128k as the firmware offset. >> + */ > > That's a interesting piece of info, but not really a reason to have a > second example. Generally, I'd rather have one example too many than one too few, but I can drop it if you think it's unnecessary. If I do that, can I add your Ack then here as well for the v2? > >> + >> + cfe@0 { >> + reg = <0x0 0x20000>; >> + read-only; >> + }; >> + >> + firmware@20000 { >> + reg = <0x20000 0x7c0000>; >> + compatible = "brcm,bcm963xx-imagetag"; >> + }; >> + >> + nvram@7e0000 { >> + reg = <0x7e0000 0x20000>; >> + }; >> + }; >> +}; >> -- >> 2.13.2 >> >
On 10 September 2018 at 11:02, Jonas Gorski <jonas.gorski@gmail.com> wrote: > On 4 September 2018 at 02:30, Rob Herring <robh@kernel.org> wrote: >> On Tue, Aug 28, 2018 at 01:19:43PM +0200, Jonas Gorski wrote: >>> Describe how to use the BCM963XX ImageTag format in a mixed flash layout >>> environment. >>> >>> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> >>> --- >>> .../mtd/partitions/brcm,bcm963xx-imagetag.txt | 78 ++++++++++++++++++++++ >>> 1 file changed, 78 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt >>> >>> diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt >>> new file mode 100644 >>> index 000000000000..f4a444d69d9a >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt >>> @@ -0,0 +1,78 @@ >>> +Broadcom BCM963XX ImageTag Partition Container >>> +============================================== >>> + >>> +Some Broadcom BCM63XX SoC based devices contain additional, non discoverable >>> +partitions or non standard bootloader partition sizes. For these a mixed layout >>> +needs to be used with an explicit firmware partition. >>> + >>> +The BCM963XX ImageTag is a simple firmware header describing the offsets and >>> +sizes of the rootfs and kernel parts contained in the firmware. >>> + >>> +Required properties: >>> +- compatible : must be "brcm,bcm963xx-imagetag" >>> + >>> +Examples: >>> + >>> +flash@1e000000 { >>> + compatible = "cfi-flash"; >>> + reg = <0x1e000000 0x2000000>; >>> + bank-width = <2>; >>> + >>> + partitions { >>> + compatible = "fixed-partitions"; >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + >>> + cfe@0 { >>> + reg = <0x0 0x10000>; >>> + read-only; >>> + }; >>> + >>> + firmware@10000 { >>> + reg = <0x10000 0x7d0000>; >>> + compatible = "brcm,bcm963xx-imagetag"; >>> + }; >>> + >>> + caldata@7e0000 { >>> + reg = <0x7e0000 0x10000>; >>> + read-only; >>> + }; >>> + >>> + nvram@7f0000 { >>> + reg = <0x7f0000 0x10000>; >>> + }; >>> + }; >>> +}; >>> + >>> + >>> +flash@1e000000 { >>> + compatible = "cfi-flash"; >>> + reg = <0x1e000000 0x2000000>; >>> + bank-width = <2>; >>> + >>> + partitions { >>> + compatible = "fixed-partitions"; >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + >>> + /* >>> + * Some devices use a flash chip with 64k erase blocks, some >>> + * use one with 128k erase blocks, so the vendor decided to >>> + * always use 128k as the firmware offset. >>> + */ >> >> That's a interesting piece of info, but not really a reason to have a >> second example. > > Generally, I'd rather have one example too many than one too few, but > I can drop it if you think it's unnecessary. If I do that, can I add > your Ack then here as well for the v2? Of course a reviewed-by, not an Ack. Jonas
On Mon, Sep 10, 2018 at 4:09 AM Jonas Gorski <jonas.gorski@gmail.com> wrote: > > On 10 September 2018 at 11:02, Jonas Gorski <jonas.gorski@gmail.com> wrote: > > On 4 September 2018 at 02:30, Rob Herring <robh@kernel.org> wrote: > >> On Tue, Aug 28, 2018 at 01:19:43PM +0200, Jonas Gorski wrote: > >>> Describe how to use the BCM963XX ImageTag format in a mixed flash layout > >>> environment. > >>> > >>> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> > >>> --- > >>> .../mtd/partitions/brcm,bcm963xx-imagetag.txt | 78 ++++++++++++++++++++++ > >>> 1 file changed, 78 insertions(+) > >>> create mode 100644 Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt > >>> > >>> diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt > >>> new file mode 100644 > >>> index 000000000000..f4a444d69d9a > >>> --- /dev/null > >>> +++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt > >>> @@ -0,0 +1,78 @@ > >>> +Broadcom BCM963XX ImageTag Partition Container > >>> +============================================== > >>> + > >>> +Some Broadcom BCM63XX SoC based devices contain additional, non discoverable > >>> +partitions or non standard bootloader partition sizes. For these a mixed layout > >>> +needs to be used with an explicit firmware partition. > >>> + > >>> +The BCM963XX ImageTag is a simple firmware header describing the offsets and > >>> +sizes of the rootfs and kernel parts contained in the firmware. > >>> + > >>> +Required properties: > >>> +- compatible : must be "brcm,bcm963xx-imagetag" > >>> + > >>> +Examples: > >>> + > >>> +flash@1e000000 { > >>> + compatible = "cfi-flash"; > >>> + reg = <0x1e000000 0x2000000>; > >>> + bank-width = <2>; > >>> + > >>> + partitions { > >>> + compatible = "fixed-partitions"; > >>> + #address-cells = <1>; > >>> + #size-cells = <1>; > >>> + > >>> + cfe@0 { > >>> + reg = <0x0 0x10000>; > >>> + read-only; > >>> + }; > >>> + > >>> + firmware@10000 { > >>> + reg = <0x10000 0x7d0000>; > >>> + compatible = "brcm,bcm963xx-imagetag"; > >>> + }; > >>> + > >>> + caldata@7e0000 { > >>> + reg = <0x7e0000 0x10000>; > >>> + read-only; > >>> + }; > >>> + > >>> + nvram@7f0000 { > >>> + reg = <0x7f0000 0x10000>; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> + > >>> +flash@1e000000 { > >>> + compatible = "cfi-flash"; > >>> + reg = <0x1e000000 0x2000000>; > >>> + bank-width = <2>; > >>> + > >>> + partitions { > >>> + compatible = "fixed-partitions"; > >>> + #address-cells = <1>; > >>> + #size-cells = <1>; > >>> + > >>> + /* > >>> + * Some devices use a flash chip with 64k erase blocks, some > >>> + * use one with 128k erase blocks, so the vendor decided to > >>> + * always use 128k as the firmware offset. > >>> + */ > >> > >> That's a interesting piece of info, but not really a reason to have a > >> second example. > > > > Generally, I'd rather have one example too many than one too few, but > > I can drop it if you think it's unnecessary. If I do that, can I add > > your Ack then here as well for the v2? > > Of course a reviewed-by, not an Ack. Yes. Rob
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt new file mode 100644 index 000000000000..f4a444d69d9a --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt @@ -0,0 +1,78 @@ +Broadcom BCM963XX ImageTag Partition Container +============================================== + +Some Broadcom BCM63XX SoC based devices contain additional, non discoverable +partitions or non standard bootloader partition sizes. For these a mixed layout +needs to be used with an explicit firmware partition. + +The BCM963XX ImageTag is a simple firmware header describing the offsets and +sizes of the rootfs and kernel parts contained in the firmware. + +Required properties: +- compatible : must be "brcm,bcm963xx-imagetag" + +Examples: + +flash@1e000000 { + compatible = "cfi-flash"; + reg = <0x1e000000 0x2000000>; + bank-width = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + cfe@0 { + reg = <0x0 0x10000>; + read-only; + }; + + firmware@10000 { + reg = <0x10000 0x7d0000>; + compatible = "brcm,bcm963xx-imagetag"; + }; + + caldata@7e0000 { + reg = <0x7e0000 0x10000>; + read-only; + }; + + nvram@7f0000 { + reg = <0x7f0000 0x10000>; + }; + }; +}; + + +flash@1e000000 { + compatible = "cfi-flash"; + reg = <0x1e000000 0x2000000>; + bank-width = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * Some devices use a flash chip with 64k erase blocks, some + * use one with 128k erase blocks, so the vendor decided to + * always use 128k as the firmware offset. + */ + + cfe@0 { + reg = <0x0 0x20000>; + read-only; + }; + + firmware@20000 { + reg = <0x20000 0x7c0000>; + compatible = "brcm,bcm963xx-imagetag"; + }; + + nvram@7e0000 { + reg = <0x7e0000 0x20000>; + }; + }; +};
Describe how to use the BCM963XX ImageTag format in a mixed flash layout environment. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- .../mtd/partitions/brcm,bcm963xx-imagetag.txt | 78 ++++++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt