Message ID | 20180816151637.24553-1-marcel.apfelbaum@gmail.com |
---|---|
State | New |
Headers | show |
Series | [V2] config: split PVRDMA from RDMA | expand |
Hi On 08/16/2018 06:16 PM, Marcel Apfelbaum wrote: > In some BSD systems RDMA migration is possible while > the pvrdma device can't be used because the mremap system call > is missing. > > Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> > --- v1->v2: - Test pvrdma support against mremap instead of BSD systems. (Peter Maydell) Thanks, Marcel > configure | 55 ++++++++++++++++++++++++++++++++++++++++++- > hw/rdma/Makefile.objs | 2 +- > 2 files changed, 55 insertions(+), 2 deletions(-) > > diff --git a/configure b/configure > index 2a7796ea80..b6d37a735b 100755 > --- a/configure > +++ b/configure > @@ -375,6 +375,7 @@ hax="no" > hvf="no" > whpx="no" > rdma="" > +pvrdma="" > gprof="no" > debug_tcg="no" > debug="no" > @@ -1363,6 +1364,10 @@ for opt do > ;; > --disable-rdma) rdma="no" > ;; > + --enable-pvrdma) pvrdma="yes" > + ;; > + --disable-pvrdma) pvrdma="no" > + ;; > --with-gtkabi=*) gtkabi="$optarg" > ;; > --disable-vte) vte="no" > @@ -1669,7 +1674,8 @@ disabled with --disable-FEATURE, default is enabled if available: > hax HAX acceleration support > hvf Hypervisor.framework acceleration support > whpx Windows Hypervisor Platform acceleration support > - rdma Enable RDMA-based migration and PVRDMA support > + rdma Enable RDMA-based migration > + pvrdma Enable PVRDMA support > vde support for vde network > netmap support for netmap network > linux-aio Linux AIO support > @@ -3064,6 +3070,48 @@ EOF > fi > fi > > +########################################## > +# PVRDMA detection > + > +cat > $TMPC <<EOF && > +#include <sys/mman.h> > + > +int > +main(void) > +{ > + char buf = 0; > + void *addr = &buf; > + addr = mremap(addr, 0, 1, MREMAP_MAYMOVE | MREMAP_FIXED); > + > + return 0; > +} > +EOF > + > +if test "$rdma" = "yes" ; then > + case "$pvrdma" in > + "") > + if compile_prog "" ""; then > + pvrdma="yes" > + else > + pvrdma="no" > + fi > + ;; > + "yes") > + if ! compile_prog "" ""; then > + error_exit "PVRDMA is not supported since mremap is not implemented" > + fi > + pvrdma="yes" > + ;; > + "no") > + pvrdma="no" > + ;; > + esac > +else > + if test "$pvrdma" = "yes" ; then > + error_exit "PVRDMA requires rdma suppport" > + fi > + pvrdma="no" > +fi > > ########################################## > # VNC SASL detection > @@ -5952,6 +6000,7 @@ if test "$tcg" = "yes" ; then > fi > echo "malloc trim support $malloc_trim" > echo "RDMA support $rdma" > +echo "PVRDMA support $pvrdma" > echo "fdt support $fdt" > echo "membarrier $membarrier" > echo "preadv support $preadv" > @@ -6708,6 +6757,10 @@ if test "$rdma" = "yes" ; then > echo "RDMA_LIBS=$rdma_libs" >> $config_host_mak > fi > > +if test "$pvrdma" = "yes" ; then > + echo "CONFIG_PVRDMA=y" >> $config_host_mak > +fi > + > if test "$have_rtnetlink" = "yes" ; then > echo "CONFIG_RTNETLINK=y" >> $config_host_mak > fi > diff --git a/hw/rdma/Makefile.objs b/hw/rdma/Makefile.objs > index 3504c39d21..bd36cbf51c 100644 > --- a/hw/rdma/Makefile.objs > +++ b/hw/rdma/Makefile.objs > @@ -1,4 +1,4 @@ > -ifeq ($(CONFIG_RDMA),y) > +ifeq ($(CONFIG_PVRDMA),y) > obj-$(CONFIG_PCI) += rdma_utils.o rdma_backend.o rdma_rm.o > obj-$(CONFIG_PCI) += vmw/pvrdma_dev_ring.o vmw/pvrdma_cmd.o \ > vmw/pvrdma_qp_ops.o vmw/pvrdma_main.o
On 08/16/2018 05:16 PM, Marcel Apfelbaum wrote: > In some BSD systems RDMA migration is possible while > the pvrdma device can't be used because the mremap system call > is missing. > > Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> > --- > configure | 55 ++++++++++++++++++++++++++++++++++++++++++- > hw/rdma/Makefile.objs | 2 +- > 2 files changed, 55 insertions(+), 2 deletions(-) [...] > diff --git a/hw/rdma/Makefile.objs b/hw/rdma/Makefile.objs > index 3504c39d21..bd36cbf51c 100644 > --- a/hw/rdma/Makefile.objs > +++ b/hw/rdma/Makefile.objs > @@ -1,4 +1,4 @@ > -ifeq ($(CONFIG_RDMA),y) > +ifeq ($(CONFIG_PVRDMA),y) > obj-$(CONFIG_PCI) += rdma_utils.o rdma_backend.o rdma_rm.o > obj-$(CONFIG_PCI) += vmw/pvrdma_dev_ring.o vmw/pvrdma_cmd.o \ > vmw/pvrdma_qp_ops.o vmw/pvrdma_main.o > Again: Shouldn't the CONFIG_PVRDMA only guard the second line? I thought the first list should be fine with CONFIG_RDMA? Thomas
Hi Thomas, On 08/16/2018 06:48 PM, Thomas Huth wrote: > On 08/16/2018 05:16 PM, Marcel Apfelbaum wrote: >> In some BSD systems RDMA migration is possible while >> the pvrdma device can't be used because the mremap system call >> is missing. >> >> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> >> --- >> configure | 55 ++++++++++++++++++++++++++++++++++++++++++- >> hw/rdma/Makefile.objs | 2 +- >> 2 files changed, 55 insertions(+), 2 deletions(-) > [...] >> diff --git a/hw/rdma/Makefile.objs b/hw/rdma/Makefile.objs >> index 3504c39d21..bd36cbf51c 100644 >> --- a/hw/rdma/Makefile.objs >> +++ b/hw/rdma/Makefile.objs >> @@ -1,4 +1,4 @@ >> -ifeq ($(CONFIG_RDMA),y) >> +ifeq ($(CONFIG_PVRDMA),y) >> obj-$(CONFIG_PCI) += rdma_utils.o rdma_backend.o rdma_rm.o >> obj-$(CONFIG_PCI) += vmw/pvrdma_dev_ring.o vmw/pvrdma_cmd.o \ >> vmw/pvrdma_qp_ops.o vmw/pvrdma_main.o >> > Again: Sorry for not seeing the comment earlier. > Shouldn't the CONFIG_PVRDMA only guard the second line? I thought > the first list should be fine with CONFIG_RDMA? Indeed, theoretically the first line can be compiled with CONFIG_RDMA, however the only code that utilize the first line .o files is the pvrdma code. So we will simply have a bigger binary without any reason. Thanks, Marcel > Thomas
On 08/16/2018 05:58 PM, Marcel Apfelbaum wrote: > Hi Thomas, > > On 08/16/2018 06:48 PM, Thomas Huth wrote: >> On 08/16/2018 05:16 PM, Marcel Apfelbaum wrote: >>> In some BSD systems RDMA migration is possible while >>> the pvrdma device can't be used because the mremap system call >>> is missing. >>> >>> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> >>> --- >>> configure | 55 ++++++++++++++++++++++++++++++++++++++++++- >>> hw/rdma/Makefile.objs | 2 +- >>> 2 files changed, 55 insertions(+), 2 deletions(-) >> [...] >>> diff --git a/hw/rdma/Makefile.objs b/hw/rdma/Makefile.objs >>> index 3504c39d21..bd36cbf51c 100644 >>> --- a/hw/rdma/Makefile.objs >>> +++ b/hw/rdma/Makefile.objs >>> @@ -1,4 +1,4 @@ >>> -ifeq ($(CONFIG_RDMA),y) >>> +ifeq ($(CONFIG_PVRDMA),y) >>> obj-$(CONFIG_PCI) += rdma_utils.o rdma_backend.o rdma_rm.o >>> obj-$(CONFIG_PCI) += vmw/pvrdma_dev_ring.o vmw/pvrdma_cmd.o \ >>> vmw/pvrdma_qp_ops.o vmw/pvrdma_main.o >>> > >> Again: > > Sorry for not seeing the comment earlier. > >> Shouldn't the CONFIG_PVRDMA only guard the second line? I thought >> the first list should be fine with CONFIG_RDMA? > > Indeed, theoretically the first line can be compiled with CONFIG_RDMA, > however the only code that utilize the first line .o files is the pvrdma > code. > So we will simply have a bigger binary without any reason. Ok, thanks for the explanation! Patch looks fine to me in that case, so: Reviewed-by: Thomas Huth <thuth@redhat.com>
diff --git a/configure b/configure index 2a7796ea80..b6d37a735b 100755 --- a/configure +++ b/configure @@ -375,6 +375,7 @@ hax="no" hvf="no" whpx="no" rdma="" +pvrdma="" gprof="no" debug_tcg="no" debug="no" @@ -1363,6 +1364,10 @@ for opt do ;; --disable-rdma) rdma="no" ;; + --enable-pvrdma) pvrdma="yes" + ;; + --disable-pvrdma) pvrdma="no" + ;; --with-gtkabi=*) gtkabi="$optarg" ;; --disable-vte) vte="no" @@ -1669,7 +1674,8 @@ disabled with --disable-FEATURE, default is enabled if available: hax HAX acceleration support hvf Hypervisor.framework acceleration support whpx Windows Hypervisor Platform acceleration support - rdma Enable RDMA-based migration and PVRDMA support + rdma Enable RDMA-based migration + pvrdma Enable PVRDMA support vde support for vde network netmap support for netmap network linux-aio Linux AIO support @@ -3064,6 +3070,48 @@ EOF fi fi +########################################## +# PVRDMA detection + +cat > $TMPC <<EOF && +#include <sys/mman.h> + +int +main(void) +{ + char buf = 0; + void *addr = &buf; + addr = mremap(addr, 0, 1, MREMAP_MAYMOVE | MREMAP_FIXED); + + return 0; +} +EOF + +if test "$rdma" = "yes" ; then + case "$pvrdma" in + "") + if compile_prog "" ""; then + pvrdma="yes" + else + pvrdma="no" + fi + ;; + "yes") + if ! compile_prog "" ""; then + error_exit "PVRDMA is not supported since mremap is not implemented" + fi + pvrdma="yes" + ;; + "no") + pvrdma="no" + ;; + esac +else + if test "$pvrdma" = "yes" ; then + error_exit "PVRDMA requires rdma suppport" + fi + pvrdma="no" +fi ########################################## # VNC SASL detection @@ -5952,6 +6000,7 @@ if test "$tcg" = "yes" ; then fi echo "malloc trim support $malloc_trim" echo "RDMA support $rdma" +echo "PVRDMA support $pvrdma" echo "fdt support $fdt" echo "membarrier $membarrier" echo "preadv support $preadv" @@ -6708,6 +6757,10 @@ if test "$rdma" = "yes" ; then echo "RDMA_LIBS=$rdma_libs" >> $config_host_mak fi +if test "$pvrdma" = "yes" ; then + echo "CONFIG_PVRDMA=y" >> $config_host_mak +fi + if test "$have_rtnetlink" = "yes" ; then echo "CONFIG_RTNETLINK=y" >> $config_host_mak fi diff --git a/hw/rdma/Makefile.objs b/hw/rdma/Makefile.objs index 3504c39d21..bd36cbf51c 100644 --- a/hw/rdma/Makefile.objs +++ b/hw/rdma/Makefile.objs @@ -1,4 +1,4 @@ -ifeq ($(CONFIG_RDMA),y) +ifeq ($(CONFIG_PVRDMA),y) obj-$(CONFIG_PCI) += rdma_utils.o rdma_backend.o rdma_rm.o obj-$(CONFIG_PCI) += vmw/pvrdma_dev_ring.o vmw/pvrdma_cmd.o \ vmw/pvrdma_qp_ops.o vmw/pvrdma_main.o
In some BSD systems RDMA migration is possible while the pvrdma device can't be used because the mremap system call is missing. Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> --- configure | 55 ++++++++++++++++++++++++++++++++++++++++++- hw/rdma/Makefile.objs | 2 +- 2 files changed, 55 insertions(+), 2 deletions(-)