| Message ID | 20180625120304.7543-1-jernej.skrabec@siol.net |
|---|---|
| Headers | show |
| Series | Add support for R40 HDMI pipeline | expand |
Dne ponedeljek, 25. junij 2018 ob 14:02:40 CEST je Jernej Skrabec napisal(a): > This series adds support for R40 HDMI pipeline. It is a bit special > than other already supported pipelines because it has additional unit > called TCON TOP responsible for relationship configuration between > mixers, TCONs and HDMI. Additionally, it has additional gates for DSI > and TV TCONs, TV encoder clock settings and pin muxing between LCD > and TV encoders. > > However, it seems that TCON TOP will become a norm, since newer > Allwinner SoCs like H6 also have this unit. > > I tested different possible configurations: > - mixer0 <> TCON-TV0 <> HDMI > - mixer0 <> TCON-TV1 <> HDMI > - mixer1 <> TCON-TV0 <> HDMI > - mixer1 <> TCON-TV1 <> HDMI > > Please review. > > Best regards, > Jernej > > Changes from v2: > - Collected tags > - Exported drm_crtc_port_mask() symbol > - Removed TCON TOP reset name > - TCON TOP gates have now right parents > - updated TCON TOP bindings > - dropped new TCON quirk due TCON TOP rework Forgot to add: - in "drm/sun4i: Don't change clock bits in DW HDMI PHY driver" patch, only parent selection bit is reset to 0. Previously whole register was set to 0. Previous version broke H3 HDMI. > > Changes from v1: > - Split DT bindings patch and updated description > - Split HDMI PHY patch > - Move header file from TCON TOP patch to dt bindings patch > - Added Rob reviewed-by tag > - Used clk_hw_register_gate() instead of custom gate registration code > - Reworked TCON TOP to be part of of-graph. Because of that, a lot of > new patches were added. > - Droped mixer index quirk patch > - Reworked TCON support for TCON TOP > - Updated commit messages > > Jernej Skrabec (24): > clk: sunxi-ng: r40: Add minimal rate for video PLLs > clk: sunxi-ng: r40: Allow setting parent rate to display related > clocks > clk: sunxi-ng: r40: Export video PLLs > dt-bindings: display: sunxi-drm: Add TCON TOP description > drm/sun4i: Add TCON TOP driver > drm/sun4i: Fix releasing node when enumerating enpoints > drm/sun4i: Split out code for enumerating endpoints in output port > drm/sun4i: Add support for traversing graph with TCON TOP > drm/sun4i: Don't skip TCONs if they don't have channel 0 > drm/sun4i: tcon: Generalize engine search algorithm > drm/sun4i: Don't check for LVDS and RGB when TCON has only ch1 > drm/sun4i: Don't check for panel or bridge on TV TCONs > dt-bindings: display: sun4i-drm: Add R40 mixer compatibles > drm/sun4i: Add support for R40 mixers > dt-bindings: display: sun4i-drm: Add description of A64 HDMI PHY > drm/sun4i: Enable DW HDMI PHY clock > drm/sun4i: Don't change clock bits in DW HDMI PHY driver > drm/sun4i: DW HDMI PHY: Add support for second PLL > drm/sun4i: Add support for second clock parent to DW HDMI PHY clk > driver > drm/sun4i: Add support for A64 HDMI PHY > drm: of: Export drm_crtc_port_mask() > drm/sun4i: DW HDMI: Expand algorithm for possible crtcs > ARM: dts: sun8i: r40: Add HDMI pipeline > ARM: dts: sun8i: r40: Enable HDMI output on BananaPi M2 Ultra > > .../bindings/display/sunxi/sun4i-drm.txt | 62 +++- > .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 45 +++ > arch/arm/boot/dts/sun8i-r40.dtsi | 269 ++++++++++++++++ > drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 58 ++-- > drivers/clk/sunxi-ng/ccu-sun8i-r40.h | 8 +- > drivers/gpu/drm/drm_of.c | 5 +- > drivers/gpu/drm/sun4i/Makefile | 3 +- > drivers/gpu/drm/sun4i/sun4i_drv.c | 121 +++++-- > drivers/gpu/drm/sun4i/sun4i_tcon.c | 66 ++-- > drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 46 ++- > drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 8 +- > drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 54 +++- > drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c | 90 ++++-- > drivers/gpu/drm/sun4i/sun8i_mixer.c | 24 ++ > drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 300 ++++++++++++++++++ > drivers/gpu/drm/sun4i/sun8i_tcon_top.h | 40 +++ > include/drm/drm_of.h | 8 + > include/dt-bindings/clock/sun8i-r40-ccu.h | 4 + > include/dt-bindings/clock/sun8i-tcon-top.h | 11 + > 19 files changed, 1100 insertions(+), 122 deletions(-) > create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.c > create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.h > create mode 100644 include/dt-bindings/clock/sun8i-tcon-top.h -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 02:02:40PM +0200, Jernej Skrabec wrote: > This series adds support for R40 HDMI pipeline. It is a bit special > than other already supported pipelines because it has additional unit > called TCON TOP responsible for relationship configuration between > mixers, TCONs and HDMI. Additionally, it has additional gates for DSI > and TV TCONs, TV encoder clock settings and pin muxing between LCD > and TV encoders. > > However, it seems that TCON TOP will become a norm, since newer > Allwinner SoCs like H6 also have this unit. > > I tested different possible configurations: > - mixer0 <> TCON-TV0 <> HDMI > - mixer0 <> TCON-TV1 <> HDMI > - mixer1 <> TCON-TV0 <> HDMI > - mixer1 <> TCON-TV1 <> HDMI > > Please review. This looks all fine by me, thanks! I'd still like some more review (by Chen-Yu and Rob) before applying it, but you can add my Acked-by for the next round if needed. Maxime
On Mon, Jun 25, 2018 at 02:02:40PM +0200, Jernej Skrabec wrote: > This series adds support for R40 HDMI pipeline. It is a bit special > than other already supported pipelines because it has additional unit > called TCON TOP responsible for relationship configuration between > mixers, TCONs and HDMI. Additionally, it has additional gates for DSI > and TV TCONs, TV encoder clock settings and pin muxing between LCD > and TV encoders. > > However, it seems that TCON TOP will become a norm, since newer > Allwinner SoCs like H6 also have this unit. > > I tested different possible configurations: > - mixer0 <> TCON-TV0 <> HDMI > - mixer0 <> TCON-TV1 <> HDMI > - mixer1 <> TCON-TV0 <> HDMI > - mixer1 <> TCON-TV1 <> HDMI > > Please review. I just applied it. It didn't apply cleanly, so please make sure it does next time, or at least state what the dependencies are. Thanks! Maxime
1;5202;0c On Wed, Jun 27, 2018 at 08:02:15PM +0200, Maxime Ripard wrote: > On Mon, Jun 25, 2018 at 02:02:40PM +0200, Jernej Skrabec wrote: > > This series adds support for R40 HDMI pipeline. It is a bit special > > than other already supported pipelines because it has additional unit > > called TCON TOP responsible for relationship configuration between > > mixers, TCONs and HDMI. Additionally, it has additional gates for DSI > > and TV TCONs, TV encoder clock settings and pin muxing between LCD > > and TV encoders. > > > > However, it seems that TCON TOP will become a norm, since newer > > Allwinner SoCs like H6 also have this unit. > > > > I tested different possible configurations: > > - mixer0 <> TCON-TV0 <> HDMI > > - mixer0 <> TCON-TV1 <> HDMI > > - mixer1 <> TCON-TV0 <> HDMI > > - mixer1 <> TCON-TV1 <> HDMI > > > > Please review. > > I just applied it. It didn't apply cleanly, so please make sure it > does next time, or at least state what the dependencies are. And it didn't compile either, because of the compile error that was reported to the previous version by kbuild... Those shouldn't be ignored and simply fixed. Maxime
Dne sreda, 27. junij 2018 ob 21:50:43 CEST je Maxime Ripard napisal(a): > 1;5202;0c > > On Wed, Jun 27, 2018 at 08:02:15PM +0200, Maxime Ripard wrote: > > On Mon, Jun 25, 2018 at 02:02:40PM +0200, Jernej Skrabec wrote: > > > This series adds support for R40 HDMI pipeline. It is a bit special > > > than other already supported pipelines because it has additional unit > > > called TCON TOP responsible for relationship configuration between > > > mixers, TCONs and HDMI. Additionally, it has additional gates for DSI > > > and TV TCONs, TV encoder clock settings and pin muxing between LCD > > > and TV encoders. > > > > > > However, it seems that TCON TOP will become a norm, since newer > > > Allwinner SoCs like H6 also have this unit. > > > > > > I tested different possible configurations: > > > - mixer0 <> TCON-TV0 <> HDMI > > > - mixer0 <> TCON-TV1 <> HDMI > > > - mixer1 <> TCON-TV0 <> HDMI > > > - mixer1 <> TCON-TV1 <> HDMI > > > > > > Please review. > > > > I just applied it. It didn't apply cleanly, so please make sure it > > does next time, or at least state what the dependencies are. > > And it didn't compile either, because of the compile error that was > reported to the previous version by kbuild... Those shouldn't be > ignored and simply fixed. Sorry about that. I forgot to rebase and had same linux-next base for all 3 versions. I actually take a look at that kbuild message, but it just didn't make much sense and it worked for me without issues. Merge conflicts would explain that. Best regards, Jernej -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, So I'm late to the party, but... On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > As already described in DT binding, TCON TOP is responsible for > configuring display pipeline. In this initial driver focus is on HDMI > pipeline, so TVE and LCD configuration is not implemented. > > Implemented features: > - HDMI source selection > - clock driver (TCON and DSI gating) > - connecting mixers and TCONS > > Something similar also existed in previous SoCs, except that it was part > of first TCON. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > --- > drivers/gpu/drm/sun4i/Makefile | 3 +- > drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 300 +++++++++++++++++++++++++ > drivers/gpu/drm/sun4i/sun8i_tcon_top.h | 40 ++++ > 3 files changed, 342 insertions(+), 1 deletion(-) > create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.c > create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.h > > diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile > index 2589f4acd5ae..09fbfd6304ba 100644 > --- a/drivers/gpu/drm/sun4i/Makefile > +++ b/drivers/gpu/drm/sun4i/Makefile > @@ -16,7 +16,8 @@ sun8i-drm-hdmi-y += sun8i_hdmi_phy_clk.o > > sun8i-mixer-y += sun8i_mixer.o sun8i_ui_layer.o \ > sun8i_vi_layer.o sun8i_ui_scaler.o \ > - sun8i_vi_scaler.o sun8i_csc.o > + sun8i_vi_scaler.o sun8i_csc.o \ > + sun8i_tcon_top.o > > sun4i-tcon-y += sun4i_crtc.o > sun4i-tcon-y += sun4i_dotclock.o > diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c > new file mode 100644 > index 000000000000..8da0460e0028 > --- /dev/null > +++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c > @@ -0,0 +1,300 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* Copyright (c) 2018 Jernej Skrabec <jernej.skrabec@siol.net> */ > + > +#include <drm/drmP.h> > + > +#include <dt-bindings/clock/sun8i-tcon-top.h> > + > +#include <linux/bitfield.h> > +#include <linux/component.h> > +#include <linux/device.h> > +#include <linux/module.h> > +#include <linux/of_graph.h> > +#include <linux/platform_device.h> > + > +#include "sun8i_tcon_top.h" > + > +static int sun8i_tcon_top_get_connected_ep_id(struct device_node *node, > + int port_id) > +{ > + struct device_node *ep, *remote, *port; > + struct of_endpoint endpoint; > + > + port = of_graph_get_port_by_id(node, port_id); > + if (!port) > + return -ENOENT; > + > + for_each_available_child_of_node(port, ep) { > + remote = of_graph_get_remote_port_parent(ep); > + if (!remote) > + continue; > + > + if (of_device_is_available(remote)) { > + of_graph_parse_endpoint(ep, &endpoint); > + > + of_node_put(remote); > + > + return endpoint.id; > + } > + > + of_node_put(remote); > + } > + > + return -ENOENT; > +} > + > +static struct clk_hw *sun8i_tcon_top_register_gate(struct device *dev, > + struct clk *parent, > + void __iomem *regs, > + spinlock_t *lock, > + u8 bit, int name_index) > +{ > + const char *clk_name, *parent_name; > + int ret; > + > + parent_name = __clk_get_name(parent); You can simply pass in the binding clock name, and have index = of_property_match_string(np, "clock-names", name); parent_name = of_clk_get_parent_name(dev->of_node, index); > + ret = of_property_read_string_index(dev->of_node, > + "clock-output-names", name_index, > + &clk_name); > + if (ret) > + return ERR_PTR(ret); > + > + return clk_hw_register_gate(dev, clk_name, parent_name, > + CLK_SET_RATE_PARENT, > + regs + TCON_TOP_GATE_SRC_REG, > + bit, 0, lock); > +}; > + > +static int sun8i_tcon_top_bind(struct device *dev, struct device *master, > + void *data) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + struct clk *dsi, *tcon_tv0, *tcon_tv1, *tve0, *tve1; > + struct clk_hw_onecell_data *clk_data; > + struct sun8i_tcon_top *tcon_top; > + bool mixer0_unused = false; > + struct resource *res; > + void __iomem *regs; > + int ret, i, id; > + u32 val; > + > + tcon_top = devm_kzalloc(dev, sizeof(*tcon_top), GFP_KERNEL); > + if (!tcon_top) > + return -ENOMEM; > + > + clk_data = devm_kzalloc(dev, sizeof(*clk_data) + > + sizeof(*clk_data->hws) * CLK_NUM, > + GFP_KERNEL); > + if (!clk_data) > + return -ENOMEM; > + tcon_top->clk_data = clk_data; > + > + spin_lock_init(&tcon_top->reg_lock); > + > + tcon_top->rst = devm_reset_control_get(dev, NULL); > + if (IS_ERR(tcon_top->rst)) { > + dev_err(dev, "Couldn't get our reset line\n"); > + return PTR_ERR(tcon_top->rst); > + } > + > + tcon_top->bus = devm_clk_get(dev, "bus"); > + if (IS_ERR(tcon_top->bus)) { > + dev_err(dev, "Couldn't get the bus clock\n"); > + return PTR_ERR(tcon_top->bus); > + } > + > + dsi = devm_clk_get(dev, "dsi"); > + if (IS_ERR(dsi)) { > + dev_err(dev, "Couldn't get the dsi clock\n"); > + return PTR_ERR(dsi); > + } > + > + tcon_tv0 = devm_clk_get(dev, "tcon-tv0"); > + if (IS_ERR(tcon_tv0)) { > + dev_err(dev, "Couldn't get the tcon-tv0 clock\n"); > + return PTR_ERR(tcon_tv0); > + } > + > + tcon_tv1 = devm_clk_get(dev, "tcon-tv1"); > + if (IS_ERR(tcon_tv1)) { > + dev_err(dev, "Couldn't get the tcon-tv1 clock\n"); > + return PTR_ERR(tcon_tv1); > + } > + > + tve0 = devm_clk_get(dev, "tve0"); > + if (IS_ERR(tve0)) { > + dev_err(dev, "Couldn't get the tve0 clock\n"); > + return PTR_ERR(tve0); > + } > + > + tve1 = devm_clk_get(dev, "tve1"); > + if (IS_ERR(tve1)) { > + dev_err(dev, "Couldn't get the tve1 clock\n"); > + return PTR_ERR(tve1); > + } So you don't actually have to hold references to the parent clocks. ChenYu > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + regs = devm_ioremap_resource(dev, res); > + if (IS_ERR(regs)) > + return PTR_ERR(regs); > + > + ret = reset_control_deassert(tcon_top->rst); > + if (ret) { > + dev_err(dev, "Could not deassert ctrl reset control\n"); > + return ret; > + } > + > + ret = clk_prepare_enable(tcon_top->bus); > + if (ret) { > + dev_err(dev, "Could not enable bus clock\n"); > + goto err_assert_reset; > + } > + > + val = 0; > + > + /* check if HDMI mux output is connected */ > + if (sun8i_tcon_top_get_connected_ep_id(dev->of_node, 5) >= 0) { > + /* find HDMI input endpoint id, if it is connected at all*/ > + id = sun8i_tcon_top_get_connected_ep_id(dev->of_node, 4); > + if (id >= 0) > + val = FIELD_PREP(TCON_TOP_HDMI_SRC_MSK, id + 1); > + else > + DRM_DEBUG_DRIVER("TCON TOP HDMI input is not connected\n"); > + } else { > + DRM_DEBUG_DRIVER("TCON TOP HDMI output is not connected\n"); > + } > + > + writel(val, regs + TCON_TOP_GATE_SRC_REG); > + > + val = 0; > + > + /* process mixer0 mux output */ > + id = sun8i_tcon_top_get_connected_ep_id(dev->of_node, 1); > + if (id >= 0) { > + val = FIELD_PREP(TCON_TOP_PORT_DE0_MSK, id); > + } else { > + DRM_DEBUG_DRIVER("TCON TOP mixer0 output is not connected\n"); > + mixer0_unused = true; > + } > + > + /* process mixer1 mux output */ > + id = sun8i_tcon_top_get_connected_ep_id(dev->of_node, 3); > + if (id >= 0) { > + val |= FIELD_PREP(TCON_TOP_PORT_DE1_MSK, id); > + > + /* > + * mixer0 mux has priority over mixer1 mux. We have to > + * make sure mixer0 doesn't overtake TCON from mixer1. > + */ > + if (mixer0_unused && id == 0) > + val |= FIELD_PREP(TCON_TOP_PORT_DE0_MSK, 1); > + } else { > + DRM_DEBUG_DRIVER("TCON TOP mixer1 output is not connected\n"); > + } > + > + writel(val, regs + TCON_TOP_PORT_SEL_REG); > + > + /* > + * TCON TOP has two muxes, which select parent clock for each TCON TV > + * channel clock. Parent could be either TCON TV or TVE clock. For now > + * we leave this fixed to TCON TV, since TVE driver for R40 is not yet > + * implemented. Once it is, graph needs to be traversed to determine > + * if TVE is active on each TCON TV. If it is, mux should be switched > + * to TVE clock parent. > + */ > + clk_data->hws[CLK_TCON_TOP_TV0] = > + sun8i_tcon_top_register_gate(dev, tcon_tv0, regs, > + &tcon_top->reg_lock, > + TCON_TOP_TCON_TV0_GATE, 0); > + > + clk_data->hws[CLK_TCON_TOP_TV1] = > + sun8i_tcon_top_register_gate(dev, tcon_tv1, regs, > + &tcon_top->reg_lock, > + TCON_TOP_TCON_TV1_GATE, 1); > + > + clk_data->hws[CLK_TCON_TOP_DSI] = > + sun8i_tcon_top_register_gate(dev, dsi, regs, > + &tcon_top->reg_lock, > + TCON_TOP_TCON_DSI_GATE, 2); > + > + for (i = 0; i < CLK_NUM; i++) > + if (IS_ERR(clk_data->hws[i])) { > + ret = PTR_ERR(clk_data->hws[i]); > + goto err_unregister_gates; > + } > + > + clk_data->num = CLK_NUM; > + > + ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, > + clk_data); > + if (ret) > + goto err_unregister_gates; > + > + dev_set_drvdata(dev, tcon_top); > + > + return 0; > + > +err_unregister_gates: > + for (i = 0; i < CLK_NUM; i++) > + if (clk_data->hws[i]) > + clk_hw_unregister_gate(clk_data->hws[i]); > + clk_disable_unprepare(tcon_top->bus); > +err_assert_reset: > + reset_control_assert(tcon_top->rst); > + > + return ret; > +} > + > +static void sun8i_tcon_top_unbind(struct device *dev, struct device *master, > + void *data) > +{ > + struct sun8i_tcon_top *tcon_top = dev_get_drvdata(dev); > + struct clk_hw_onecell_data *clk_data = tcon_top->clk_data; > + int i; > + > + of_clk_del_provider(dev->of_node); > + for (i = 0; i < CLK_NUM; i++) > + clk_hw_unregister_gate(clk_data->hws[i]); > + > + clk_disable_unprepare(tcon_top->bus); > + reset_control_assert(tcon_top->rst); > +} > + > +static const struct component_ops sun8i_tcon_top_ops = { > + .bind = sun8i_tcon_top_bind, > + .unbind = sun8i_tcon_top_unbind, > +}; > + > +static int sun8i_tcon_top_probe(struct platform_device *pdev) > +{ > + return component_add(&pdev->dev, &sun8i_tcon_top_ops); > +} > + > +static int sun8i_tcon_top_remove(struct platform_device *pdev) > +{ > + component_del(&pdev->dev, &sun8i_tcon_top_ops); > + > + return 0; > +} > + > +/* sun4i_drv uses this list to check if a device node is a TCON TOP */ > +const struct of_device_id sun8i_tcon_top_of_table[] = { > + { .compatible = "allwinner,sun8i-r40-tcon-top" }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, sun8i_tcon_top_of_table); > +EXPORT_SYMBOL(sun8i_tcon_top_of_table); > + > +static struct platform_driver sun8i_tcon_top_platform_driver = { > + .probe = sun8i_tcon_top_probe, > + .remove = sun8i_tcon_top_remove, > + .driver = { > + .name = "sun8i-tcon-top", > + .of_match_table = sun8i_tcon_top_of_table, > + }, > +}; > +module_platform_driver(sun8i_tcon_top_platform_driver); > + > +MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@siol.net>"); > +MODULE_DESCRIPTION("Allwinner R40 TCON TOP driver"); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.h b/drivers/gpu/drm/sun4i/sun8i_tcon_top.h > new file mode 100644 > index 000000000000..39838bbfeaee > --- /dev/null > +++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.h > @@ -0,0 +1,40 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* Copyright (c) 2018 Jernej Skrabec <jernej.skrabec@siol.net> */ > + > +#ifndef _SUN8I_TCON_TOP_H_ > +#define _SUN8I_TCON_TOP_H_ > + > +#include <linux/clk.h> > +#include <linux/clk-provider.h> > +#include <linux/reset.h> > +#include <linux/spinlock.h> > + > +#define TCON_TOP_TCON_TV_SETUP_REG 0x00 > + > +#define TCON_TOP_PORT_SEL_REG 0x1C > +#define TCON_TOP_PORT_DE0_MSK GENMASK(1, 0) > +#define TCON_TOP_PORT_DE1_MSK GENMASK(5, 4) > + > +#define TCON_TOP_GATE_SRC_REG 0x20 > +#define TCON_TOP_HDMI_SRC_MSK GENMASK(29, 28) > +#define TCON_TOP_TCON_TV1_GATE 24 > +#define TCON_TOP_TCON_TV0_GATE 20 > +#define TCON_TOP_TCON_DSI_GATE 16 > + > +#define CLK_NUM 3 > + > +struct sun8i_tcon_top { > + struct clk *bus; > + struct clk_hw_onecell_data *clk_data; > + struct reset_control *rst; > + > + /* > + * spinlock is used to synchronize access to same > + * register where multiple clock gates can be set. > + */ > + spinlock_t reg_lock; > +}; > + > +extern const struct of_device_id sun8i_tcon_top_of_table[]; > + > +#endif /* _SUN8I_TCON_TOP_H_ */ > -- > 2.18.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > TV TCONs (channel 1 only) are always connected to TV or HDMI encoder. > Because of that, all output endpoints on such TCON node will point to a > encoder which is part of component framework. > > Correct current graph traversing algorithm in such way that it doesn't > skip output enpoints with id 0 on TV TCONs. No. Our bindings say that endpoint 0 _is_ channel 0. For TCONs that don't have channel 0, it must be skipped. ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > sun4i_drv_add_endpoints() has a memory leak since it uses of_node_put() > when remote is equal to NULL and does nothing when remote has a valid > pointer. > > Invert the logic to fix memory leak. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Given this is a fix, it should have Fixes and stable tags. ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > TCON TOP is different from other nodes in graph by having 3 input and 3 > output ports. Additionally, connection to TV TCON might lead back to > HDMI mux input port, creating loops. > > Add support for traversing such graph. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > Until now, each node has one input port and one output port. However, > with TCON TOP this is no longer true. It has 3 input and 3 output ports. > > In order to prepare to this situation, split out the code which checks > all endpoints in input port and adds available components to fifo. > > This patch doesn't do any functional change. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > Current "old" method to find engine worked pretty well for DE2. However, > it doesn't work when TCON TOP is between mixer (engine) and TCON. TCON > TOP has multiple input ports, but current engine search algorithm > expects only one. > > This can be fixed by first looking for output port id and selecting > matching input by subtracting 1 for the next round. This work even if > there is only one input and output. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > --- > drivers/gpu/drm/sun4i/sun4i_tcon.c | 22 ++++++++++++++++++---- > 1 file changed, 18 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c > index 08747fc3ee71..264bcc43da11 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > @@ -791,12 +791,14 @@ static int sun4i_tcon_init_regmap(struct device *dev, > */ > static struct sunxi_engine * > sun4i_tcon_find_engine_traverse(struct sun4i_drv *drv, > - struct device_node *node) > + struct device_node *node, > + u32 port_id) > { > struct device_node *port, *ep, *remote; > struct sunxi_engine *engine = ERR_PTR(-EINVAL); > + u32 reg = 0; > > - port = of_graph_get_port_by_id(node, 0); > + port = of_graph_get_port_by_id(node, port_id); > if (!port) > return ERR_PTR(-EINVAL); > > @@ -826,8 +828,20 @@ sun4i_tcon_find_engine_traverse(struct sun4i_drv *drv, > if (remote == engine->node) > goto out_put_remote; > > + /* > + * According to device tree binding input ports have even id > + * number and output ports have odd id. Since component with > + * more than one input and one output (TCON TOP) exits, correct > + * remote input id has to be calculated by subtracting 1 from > + * remote output id. If this for some reason can't be done, 0 > + * is used as input port id. > + */ You need to call of_node_put(port); to drop the reference to the original port. Otherwise, Reviewed-by: Chen-Yu Tsai <wens@csie.org> > + port = of_graph_get_remote_port(ep); > + if (!of_property_read_u32(port, "reg", ®) && reg > 0) > + reg -= 1; > + > /* keep looking through upstream ports */ > - engine = sun4i_tcon_find_engine_traverse(drv, remote); > + engine = sun4i_tcon_find_engine_traverse(drv, remote, reg); > > out_put_remote: > of_node_put(remote); > @@ -950,7 +964,7 @@ static struct sunxi_engine *sun4i_tcon_find_engine(struct sun4i_drv *drv, > > /* Fallback to old method by traversing input endpoints */ > of_node_put(port); > - return sun4i_tcon_find_engine_traverse(drv, node); > + return sun4i_tcon_find_engine_traverse(drv, node, 0); > } > > static int sun4i_tcon_bind(struct device *dev, struct device *master, > -- > 2.18.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > LVDS and RGB interfaces are always connected to TCONs which have channel > 0. It doesn't make sense to try to init them on TV TCONs. > > Add a check if TCON has channel 0 before trying to init LVDS or RGB > interface. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Though I think at some point we could just have separate functions to handle channel 0 and channel 1. ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > TV TCONs are always connected to TV or HDMI encoder, so it doesn't make > sense to check if panel or bridge is connected to them. > > Check if TCON has channel 0 and only then check for connected panel or > bridges. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > --- > drivers/gpu/drm/sun4i/sun4i_tcon.c | 12 +++++++++--- > 1 file changed, 9 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c > index 761687ebacba..a41c7bb0d557 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > @@ -1178,13 +1178,19 @@ static const struct component_ops sun4i_tcon_ops = { > static int sun4i_tcon_probe(struct platform_device *pdev) > { > struct device_node *node = pdev->dev.of_node; > + const struct sun4i_tcon_quirks *quirks; > struct drm_bridge *bridge; > struct drm_panel *panel; > int ret; > > - ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge); > - if (ret == -EPROBE_DEFER) > - return ret; > + quirks = of_device_get_match_data(&pdev->dev); > + > + /* panels and bridges are present only on TCONs with channel 0 */ > + if (quirks->has_channel_0) { This is implied by the device tree binding. TCONs that don't have panels or bridges will have endpoint 0 unconnected, and drm_of_find_panel_or_bridge will return -ENODEV. It doesn't hurt to skip the check though. Reviewed-by: Chen-Yu Tsai <wens@csie.org> > + ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge); > + if (ret == -EPROBE_DEFER) > + return ret; > + } > > return component_add(&pdev->dev, &sun4i_tcon_ops); > } > -- > 2.18.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > Both mixers have similar capabilities as others SoCs with DE2. > > First mixer has 1 VI and 3 UI planes and supports HW scaling on all > planes. > > Second mixer has 1 VI and 1 UI planes and also supports HW scaling on > all planes. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > Current DW HDMI PHY code never prepares and enables PHY clock after it is > created. It's just used as it is. This may work in some cases, but it's > clearly wrong. Fix it by adding proper calls to enable/disable PHY > clock. > > Fixes: 4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant") > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> So why does it work on the H3? Because there's only one PLL that the whole display pipeline uses? We should probably tag this for stable. So, Cc: <stable@vger.kernel.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > DW HDMI PHY driver and PHY clock driver share same registers. Make sure > that DW HDMI PHY setup code doesn't change any clock related bits. > During initialization, set PHY PLL parent bit to 0. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> and maybe a fixes tag? -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > Some DW HDMI PHYs, like those found in A64 and R40 SoCs, can select > between two clock parents. > > Add code which reads second PLL from DT. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> This patch by itself does not do anything. It should be merged with the next one. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > Expand HDMI PHY clock driver to support second clock parent. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> > --- > drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 4 +- > drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 3 +- > drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c | 90 ++++++++++++++++------ > 3 files changed, 73 insertions(+), 24 deletions(-) > > diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h > index 46a3aa6a53a9..aadbe0a10b0c 100644 > --- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h > +++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h > @@ -99,6 +99,7 @@ > #define SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN BIT(28) > #define SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 BIT(27) > #define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK BIT(26) > +#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_SHIFT 26 > #define SUN8I_HDMI_PHY_PLL_CFG1_PLLEN BIT(25) > #define SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(x) ((x) << 22) > #define SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(x) ((x) << 20) > @@ -190,6 +191,7 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi); > void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy); > const struct dw_hdmi_phy_ops *sun8i_hdmi_phy_get_ops(void); > > -int sun8i_phy_clk_create(struct sun8i_hdmi_phy *phy, struct device *dev); > +int sun8i_phy_clk_create(struct sun8i_hdmi_phy *phy, struct device *dev, > + bool second_parent); > > #endif /* _SUN8I_DW_HDMI_H_ */ > diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c > index f0877b3f67e7..aea46b08f127 100644 > --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c > +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c > @@ -491,7 +491,8 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node) > } > } > > - ret = sun8i_phy_clk_create(phy, dev); > + ret = sun8i_phy_clk_create(phy, dev, > + phy->variant->has_second_pll); > if (ret) { > dev_err(dev, "Couldn't create the PHY clock\n"); > goto err_put_clk_pll1; > diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c > index faea449812f8..a4d31fe3abff 100644 > --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c > +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c > @@ -22,35 +22,45 @@ static int sun8i_phy_clk_determine_rate(struct clk_hw *hw, > { > unsigned long rate = req->rate; > unsigned long best_rate = 0; > + struct clk_hw *best_parent = NULL; > struct clk_hw *parent; > int best_div = 1; > - int i; > + int i, p; > > - parent = clk_hw_get_parent(hw); > - > - for (i = 1; i <= 16; i++) { > - unsigned long ideal = rate * i; > - unsigned long rounded; > - > - rounded = clk_hw_round_rate(parent, ideal); > + for (p = 0; p < clk_hw_get_num_parents(hw); p++) { > + parent = clk_hw_get_parent_by_index(hw, p); > + if (!parent) > + continue; > > - if (rounded == ideal) { > - best_rate = rounded; > - best_div = i; > - break; > + for (i = 1; i <= 16; i++) { > + unsigned long ideal = rate * i; > + unsigned long rounded; > + > + rounded = clk_hw_round_rate(parent, ideal); > + > + if (rounded == ideal) { > + best_rate = rounded; > + best_div = i; > + best_parent = parent; > + break; > + } > + > + if (!best_rate || > + abs(rate - rounded / i) < > + abs(rate - best_rate / best_div)) { > + best_rate = rounded; > + best_div = i; > + best_parent = parent; > + } > } > > - if (!best_rate || > - abs(rate - rounded / i) < > - abs(rate - best_rate / best_div)) { > - best_rate = rounded; > - best_div = i; > - } > + if (best_rate / best_div == rate) > + break; > } > > req->rate = best_rate / best_div; > req->best_parent_rate = best_rate; > - req->best_parent_hw = parent; > + req->best_parent_hw = best_parent; > > return 0; > } > @@ -95,22 +105,58 @@ static int sun8i_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate, > return 0; > } > > +static u8 sun8i_phy_clk_get_parent(struct clk_hw *hw) > +{ > + struct sun8i_phy_clk *priv = hw_to_phy_clk(hw); > + u32 reg; > + > + regmap_read(priv->phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, ®); > + reg = (reg & SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK) >> > + SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_SHIFT; > + > + return reg; > +} > + > +static int sun8i_phy_clk_set_parent(struct clk_hw *hw, u8 index) > +{ > + struct sun8i_phy_clk *priv = hw_to_phy_clk(hw); > + > + if (index > 1) > + return -EINVAL; > + > + regmap_update_bits(priv->phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, > + SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK, > + index << SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_SHIFT); > + > + return 0; > +} > + > static const struct clk_ops sun8i_phy_clk_ops = { > .determine_rate = sun8i_phy_clk_determine_rate, > .recalc_rate = sun8i_phy_clk_recalc_rate, > .set_rate = sun8i_phy_clk_set_rate, > + > + .get_parent = sun8i_phy_clk_get_parent, > + .set_parent = sun8i_phy_clk_set_parent, > }; > > -int sun8i_phy_clk_create(struct sun8i_hdmi_phy *phy, struct device *dev) > +int sun8i_phy_clk_create(struct sun8i_hdmi_phy *phy, struct device *dev, > + bool second_parent) > { > struct clk_init_data init; > struct sun8i_phy_clk *priv; > - const char *parents[1]; > + const char *parents[2]; > > parents[0] = __clk_get_name(phy->clk_pll0); > if (!parents[0]) > return -ENODEV; > > + if (second_parent) { > + parents[1] = __clk_get_name(phy->clk_pll1); Like I mentioned in the TCON TOP patch, you don't actually need a reference if all you want is just the clock name. ChenYu > + if (!parents[1]) > + return -ENODEV; > + } > + > priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > if (!priv) > return -ENOMEM; > @@ -118,7 +164,7 @@ int sun8i_phy_clk_create(struct sun8i_hdmi_phy *phy, struct device *dev) > init.name = "hdmi-phy-clk"; > init.ops = &sun8i_phy_clk_ops; > init.parent_names = parents; > - init.num_parents = 1; > + init.num_parents = second_parent ? 2 : 1; > init.flags = CLK_SET_RATE_PARENT; > > priv->phy = phy; > -- > 2.18.0 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > PHY is the same as in H3, except it can switch between two clock > parents. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > Function is useful when drm_of_find_possible_crtcs() can't be used and > custom parsing is needed. This can happen for example when there is a > node with multiple muxes between crtc and encoder. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > drm_of_find_possible_crtcs() doesn't work when DW HDMI encoder is > connected to TCON (crtc) through mux in TCON TOP. > > In that case TCON TOP HDMI mux input port has to be manually traversed > and checked if it matches any known crtc. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > Add all entries needed for HDMI to function properly. > > Since R40 has highly configurable pipeline, both mixers and both TCON > TVs are added. Board specific DT should then connect them together > trough TCON TOP muxers to best fit the purpose of the board. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > --- > arch/arm/boot/dts/sun8i-r40.dtsi | 269 +++++++++++++++++++++++++++++++ > 1 file changed, 269 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi > index 173dcc1652d2..a2a75fb04caf 100644 > --- a/arch/arm/boot/dts/sun8i-r40.dtsi > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi > @@ -42,8 +42,11 @@ > */ > > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/sun8i-de2.h> > #include <dt-bindings/clock/sun8i-r40-ccu.h> > +#include <dt-bindings/clock/sun8i-tcon-top.h> > #include <dt-bindings/reset/sun8i-r40-ccu.h> > +#include <dt-bindings/reset/sun8i-de2.h> > > / { > #address-cells = <1>; > @@ -99,12 +102,76 @@ > }; > }; > > + de: display-engine { > + compatible = "allwinner,sun8i-r40-display-engine", > + "allwinner,sun8i-h3-display-engine"; Given that the display pipeline looks different, they should not be compatible. > + allwinner,pipelines = <&mixer0>, <&mixer1>; > + status = "disabled"; > + }; > + > soc { > compatible = "simple-bus"; > #address-cells = <1>; > #size-cells = <1>; > ranges; > > + display_clocks: clock@1000000 { > + compatible = "allwinner,sun8i-r40-de2-clk", > + "allwinner,sun8i-h3-de2-clk"; > + reg = <0x01000000 0x100000>; > + clocks = <&ccu CLK_DE>, > + <&ccu CLK_BUS_DE>; > + clock-names = "mod", > + "bus"; > + resets = <&ccu RST_BUS_DE>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > + mixer0: mixer@1100000 { > + compatible = "allwinner,sun8i-r40-de2-mixer-0"; > + reg = <0x01100000 0x100000>; > + clocks = <&display_clocks CLK_BUS_MIXER0>, > + <&display_clocks CLK_MIXER0>; > + clock-names = "bus", > + "mod"; > + resets = <&display_clocks RST_MIXER0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + mixer0_out: port@1 { > + reg = <1>; > + mixer0_out_tcon_top: endpoint { > + remote-endpoint = <&tcon_top_mixer0_in_mixer0>; > + }; > + }; > + }; > + }; > + > + mixer1: mixer@1200000 { > + compatible = "allwinner,sun8i-r40-de2-mixer-1"; > + reg = <0x01200000 0x100000>; > + clocks = <&display_clocks CLK_BUS_MIXER1>, > + <&display_clocks CLK_MIXER1>; > + clock-names = "bus", > + "mod"; > + resets = <&display_clocks RST_WB>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + mixer1_out: port@1 { > + reg = <1>; > + mixer1_out_tcon_top: endpoint { > + remote-endpoint = <&tcon_top_mixer1_in_mixer1>; > + }; > + }; > + }; > + }; > + > nmi_intc: interrupt-controller@1c00030 { > compatible = "allwinner,sun7i-a20-sc-nmi"; > interrupt-controller; > @@ -451,6 +518,163 @@ > #size-cells = <0>; > }; > > + tcon_top: tcon-top@1c70000 { > + compatible = "allwinner,sun8i-r40-tcon-top"; > + reg = <0x01c70000 0x1000>; > + clocks = <&ccu CLK_BUS_TCON_TOP>, > + <&ccu CLK_TCON_TV0>, > + <&ccu CLK_TVE0>, > + <&ccu CLK_TCON_TV1>, > + <&ccu CLK_TVE1>, > + <&ccu CLK_DSI_DPHY>; > + clock-names = "bus", > + "tcon-tv0", > + "tve0", > + "tcon-tv1", > + "tve1", > + "dsi"; > + clock-output-names = "tcon-top-tv0", > + "tcon-top-tv1", > + "tcon-top-dsi"; > + resets = <&ccu RST_BUS_TCON_TOP>; > + #clock-cells = <1>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + tcon_top_mixer0_in: port@0 { > + reg = <0>; > + > + tcon_top_mixer0_in_mixer0: endpoint { > + remote-endpoint = <&mixer0_out_tcon_top>; > + }; > + }; > + > + tcon_top_mixer0_out: port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + tcon_top_mixer0_out_tcon_lcd0: endpoint@0 { > + reg = <0>; > + }; > + > + tcon_top_mixer0_out_tcon_lcd1: endpoint@1 { > + reg = <1>; > + }; > + > + tcon_top_mixer0_out_tcon_tv0: endpoint@2 { > + reg = <2>; > + }; > + > + tcon_top_mixer0_out_tcon_tv1: endpoint@3 { > + reg = <3>; > + }; > + }; > + > + tcon_top_mixer1_in: port@2 { > + reg = <2>; > + > + tcon_top_mixer1_in_mixer1: endpoint { > + remote-endpoint = <&mixer1_out_tcon_top>; > + }; > + }; > + > + tcon_top_mixer1_out: port@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + > + tcon_top_mixer1_out_tcon_lcd0: endpoint@0 { > + reg = <0>; > + }; > + > + tcon_top_mixer1_out_tcon_lcd1: endpoint@1 { > + reg = <1>; > + }; > + > + tcon_top_mixer1_out_tcon_tv0: endpoint@2 { > + reg = <2>; > + }; > + > + tcon_top_mixer1_out_tcon_tv1: endpoint@3 { > + reg = <3>; > + }; > + }; > + > + tcon_top_hdmi_in: port@4 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <4>; > + > + tcon_top_hdmi_in_tcon_tv0: endpoint@0 { > + reg = <0>; > + }; > + > + tcon_top_hdmi_in_tcon_tv1: endpoint@1 { > + reg = <1>; > + }; > + }; > + > + tcon_top_hdmi_out: port@5 { > + reg = <5>; > + > + tcon_top_hdmi_out_hdmi: endpoint { > + remote-endpoint = <&hdmi_in_tcon_top>; > + }; > + }; > + }; > + }; > + > + tcon_tv0: lcd-controller@1c73000 { > + compatible = "allwinner,sun8i-r40-tcon-tv", > + "allwinner,sun8i-a83t-tcon-tv"; > + reg = <0x01c73000 0x1000>; > + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; > + clock-names = "ahb", "tcon-ch1"; > + resets = <&ccu RST_BUS_TCON_TV0>; > + reset-names = "lcd"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + tcon_tv0_in: port@0 { > + reg = <0>; > + }; > + > + tcon_tv0_out: port@1 { > + reg = <1>; > + }; > + }; > + }; > + > + tcon_tv1: lcd-controller@1c74000 { > + compatible = "allwinner,sun8i-r40-tcon-tv", > + "allwinner,sun8i-a83t-tcon-tv"; > + reg = <0x01c74000 0x1000>; > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>; > + clock-names = "ahb", "tcon-ch1"; > + resets = <&ccu RST_BUS_TCON_TV1>; > + reset-names = "lcd"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + tcon_tv1_in: port@0 { > + reg = <0>; > + }; > + > + tcon_tv1_out: port@1 { > + reg = <1>; You are missing the remote-endpoints for all the TCON-TOP <-> TCON connections. Also, on the driver side, there's no code to handle dynamically mapping mixers to the TCONs that are being used. In the past we had simple 1:1 mappings. This is no longer the case, and it needs to be dealt with. ChenYu > + }; > + }; > + }; > + > gic: interrupt-controller@1c81000 { > compatible = "arm,gic-400"; > reg = <0x01c81000 0x1000>, > @@ -461,6 +685,51 @@ > #interrupt-cells = <3>; > interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; > }; > + > + hdmi: hdmi@1ee0000 { > + compatible = "allwinner,sun8i-r40-dw-hdmi", > + "allwinner,sun8i-a83t-dw-hdmi"; > + reg = <0x01ee0000 0x10000>; > + reg-io-width = <1>; > + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>, > + <&ccu CLK_HDMI>; > + clock-names = "iahb", "isfr", "tmds"; > + resets = <&ccu RST_BUS_HDMI1>; > + reset-names = "ctrl"; > + phys = <&hdmi_phy>; > + phy-names = "hdmi-phy"; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + hdmi_in: port@0 { > + reg = <0>; > + > + hdmi_in_tcon_top: endpoint { > + remote-endpoint = <&tcon_top_hdmi_out_hdmi>; > + }; > + }; > + > + hdmi_out: port@1 { > + reg = <1>; > + }; > + }; > + }; > + > + hdmi_phy: hdmi-phy@1ef0000 { > + compatible = "allwinner,sun8i-r40-hdmi-phy", > + "allwinner,sun50i-a64-hdmi-phy"; > + reg = <0x01ef0000 0x10000>; > + clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, > + <&ccu 7>, <&ccu 16>; > + clock-names = "bus", "mod", "pll-0", "pll-1"; > + resets = <&ccu RST_BUS_HDMI0>; > + reset-names = "phy"; > + #phy-cells = <0>; > + }; > }; > > timer { > -- > 2.18.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > Since HDMI can be considered as main output, most capable mixer is > connected to it (mixer0). > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > --- > .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 45 +++++++++++++++++++ > 1 file changed, 45 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts > index 27d9ccd0ef2f..0ebc2f9a980e 100644 > --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts > +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts > @@ -58,6 +58,17 @@ > stdout-path = "serial0:115200n8"; > }; > > + connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > + > leds { > compatible = "gpio-leds"; > > @@ -93,6 +104,10 @@ > }; > }; > > +&de { > + status = "okay"; > +}; > + > &ehci1 { > status = "okay"; > }; > @@ -101,6 +116,16 @@ > status = "okay"; > }; > > +&hdmi { > + status = "okay"; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > &i2c0 { > status = "okay"; > > @@ -195,6 +220,26 @@ > status = "okay"; > }; > > +&tcon_top_hdmi_in_tcon_tv0 { > + remote-endpoint = <&tcon_tv0_out_tcon_top>; > +}; > + > +&tcon_top_mixer0_out_tcon_tv0 { > + remote-endpoint = <&tcon_tv0_in_tcon_top>; > +}; > + > +&tcon_tv0_in { > + tcon_tv0_in_tcon_top: endpoint { > + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>; > + }; > +}; > + > +&tcon_tv0_out { > + tcon_tv0_out_tcon_top: endpoint { > + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>; > + }; > +}; > + This is the wrong place for this. Once removed, Reviewed-by: Chen-Yu Tsai <wens@csie.org> > &uart0 { > pinctrl-names = "default"; > pinctrl-0 = <&uart0_pb_pins>; > -- > 2.18.0 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne četrtek, 28. junij 2018 ob 03:51:31 CEST je Chen-Yu Tsai napisal(a): > On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > > TV TCONs (channel 1 only) are always connected to TV or HDMI encoder. > > Because of that, all output endpoints on such TCON node will point to a > > encoder which is part of component framework. > > > > Correct current graph traversing algorithm in such way that it doesn't > > skip output enpoints with id 0 on TV TCONs. > > No. Our bindings say that endpoint 0 _is_ channel 0. For TCONs that don't > have channel 0, it must be skipped. I'm not sure where this is stated. I read TCON binding again. Can you please point me to it? So on TV TCONs on R40 (without channel 0) TVE would be endpoint 1 and HDMI endpoint 2 (or the other way around)? Best regards, Jernej -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne četrtek, 28. junij 2018 ob 04:06:52 CEST je Chen-Yu Tsai napisal(a): > On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > > Current "old" method to find engine worked pretty well for DE2. However, > > it doesn't work when TCON TOP is between mixer (engine) and TCON. TCON > > TOP has multiple input ports, but current engine search algorithm > > expects only one. > > > > This can be fixed by first looking for output port id and selecting > > matching input by subtracting 1 for the next round. This work even if > > there is only one input and output. > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > --- > > > > drivers/gpu/drm/sun4i/sun4i_tcon.c | 22 ++++++++++++++++++---- > > 1 file changed, 18 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 08747fc3ee71..264bcc43da11 > > 100644 > > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > > @@ -791,12 +791,14 @@ static int sun4i_tcon_init_regmap(struct device > > *dev, > > > > */ > > > > static struct sunxi_engine * > > sun4i_tcon_find_engine_traverse(struct sun4i_drv *drv, > > > > - struct device_node *node) > > + struct device_node *node, > > + u32 port_id) > > > > { > > > > struct device_node *port, *ep, *remote; > > struct sunxi_engine *engine = ERR_PTR(-EINVAL); > > > > + u32 reg = 0; > > > > - port = of_graph_get_port_by_id(node, 0); > > + port = of_graph_get_port_by_id(node, port_id); > > > > if (!port) > > > > return ERR_PTR(-EINVAL); > > > > @@ -826,8 +828,20 @@ sun4i_tcon_find_engine_traverse(struct sun4i_drv > > *drv, > > > > if (remote == engine->node) > > > > goto out_put_remote; > > > > + /* > > + * According to device tree binding input ports have even id > > + * number and output ports have odd id. Since component with > > + * more than one input and one output (TCON TOP) exits, correct > > + * remote input id has to be calculated by subtracting 1 from > > + * remote output id. If this for some reason can't be done, 0 > > + * is used as input port id. > > + */ > > You need to call > > of_node_put(port); > > to drop the reference to the original port. Thanks for noticing it. I guess I should send fix patch, since patches from drm-misc-next can't be dropped. Best regards, Jernej > Otherwise, > > Reviewed-by: Chen-Yu Tsai <wens@csie.org> > > > + port = of_graph_get_remote_port(ep); > > + if (!of_property_read_u32(port, "reg", ®) && reg > 0) > > + reg -= 1; > > + > > > > /* keep looking through upstream ports */ > > > > - engine = sun4i_tcon_find_engine_traverse(drv, remote); > > + engine = sun4i_tcon_find_engine_traverse(drv, remote, reg); > > > > out_put_remote: > > of_node_put(remote); > > > > @@ -950,7 +964,7 @@ static struct sunxi_engine > > *sun4i_tcon_find_engine(struct sun4i_drv *drv,> > > /* Fallback to old method by traversing input endpoints */ > > of_node_put(port); > > > > - return sun4i_tcon_find_engine_traverse(drv, node); > > + return sun4i_tcon_find_engine_traverse(drv, node, 0); > > > > } > > > > static int sun4i_tcon_bind(struct device *dev, struct device *master, > > > > -- > > 2.18.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne četrtek, 28. junij 2018 ob 04:22:36 CEST je Chen-Yu Tsai napisal(a): > On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > > Current DW HDMI PHY code never prepares and enables PHY clock after it is > > created. It's just used as it is. This may work in some cases, but it's > > clearly wrong. Fix it by adding proper calls to enable/disable PHY > > clock. > > > > Fixes: 4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant") > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > So why does it work on the H3? Because there's only one PLL that the whole > display pipeline uses? Yes, there is only one PLL_VIDEO and TCON and HDMI controller already enabled it. Best regards, Jernej > > We should probably tag this for stable. So, > > Cc: <stable@vger.kernel.org> > Reviewed-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne četrtek, 28. junij 2018 ob 04:25:54 CEST je Chen-Yu Tsai napisal(a): > On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > > Some DW HDMI PHYs, like those found in A64 and R40 SoCs, can select > > between two clock parents. > > > > Add code which reads second PLL from DT. > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > This patch by itself does not do anything. It should be merged with the > next one. Maxime said clock changes should be separated from DT changes. http://lists.infradead.org/pipermail/linux-arm-kernel/2018-May/578775.html Best regards, Jernej -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne četrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai napisal(a): > On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > > Add all entries needed for HDMI to function properly. > > > > Since R40 has highly configurable pipeline, both mixers and both TCON > > TVs are added. Board specific DT should then connect them together > > trough TCON TOP muxers to best fit the purpose of the board. > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > --- > > > > arch/arm/boot/dts/sun8i-r40.dtsi | 269 +++++++++++++++++++++++++++++++ > > 1 file changed, 269 insertions(+) > > > > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi > > b/arch/arm/boot/dts/sun8i-r40.dtsi index 173dcc1652d2..a2a75fb04caf > > 100644 > > --- a/arch/arm/boot/dts/sun8i-r40.dtsi > > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi > > @@ -42,8 +42,11 @@ > > > > */ > > > > #include <dt-bindings/interrupt-controller/arm-gic.h> > > > > +#include <dt-bindings/clock/sun8i-de2.h> > > > > #include <dt-bindings/clock/sun8i-r40-ccu.h> > > > > +#include <dt-bindings/clock/sun8i-tcon-top.h> Maxime, above line breaks compilation for build robot, sorry. > > > > #include <dt-bindings/reset/sun8i-r40-ccu.h> > > > > +#include <dt-bindings/reset/sun8i-de2.h> > > > > / { > > > > #address-cells = <1>; > > > > @@ -99,12 +102,76 @@ > > > > }; > > > > }; > > > > + de: display-engine { > > + compatible = "allwinner,sun8i-r40-display-engine", > > + "allwinner,sun8i-h3-display-engine"; > > Given that the display pipeline looks different, they should not be > compatible. Ok. > > > + allwinner,pipelines = <&mixer0>, <&mixer1>; > > + status = "disabled"; > > + }; > > + > > > > soc { > > > > compatible = "simple-bus"; > > #address-cells = <1>; > > #size-cells = <1>; > > ranges; > > > > + display_clocks: clock@1000000 { > > + compatible = "allwinner,sun8i-r40-de2-clk", > > + "allwinner,sun8i-h3-de2-clk"; > > + reg = <0x01000000 0x100000>; > > + clocks = <&ccu CLK_DE>, > > + <&ccu CLK_BUS_DE>; > > + clock-names = "mod", > > + "bus"; > > + resets = <&ccu RST_BUS_DE>; > > + #clock-cells = <1>; > > + #reset-cells = <1>; > > + }; > > + > > + mixer0: mixer@1100000 { > > + compatible = "allwinner,sun8i-r40-de2-mixer-0"; > > + reg = <0x01100000 0x100000>; > > + clocks = <&display_clocks CLK_BUS_MIXER0>, > > + <&display_clocks CLK_MIXER0>; > > + clock-names = "bus", > > + "mod"; > > + resets = <&display_clocks RST_MIXER0>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + mixer0_out: port@1 { > > + reg = <1>; > > + mixer0_out_tcon_top: endpoint { > > + remote-endpoint = > > <&tcon_top_mixer0_in_mixer0>; + }; > > + }; > > + }; > > + }; > > + > > + mixer1: mixer@1200000 { > > + compatible = "allwinner,sun8i-r40-de2-mixer-1"; > > + reg = <0x01200000 0x100000>; > > + clocks = <&display_clocks CLK_BUS_MIXER1>, > > + <&display_clocks CLK_MIXER1>; > > + clock-names = "bus", > > + "mod"; > > + resets = <&display_clocks RST_WB>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + mixer1_out: port@1 { > > + reg = <1>; > > + mixer1_out_tcon_top: endpoint { > > + remote-endpoint = > > <&tcon_top_mixer1_in_mixer1>; + }; > > + }; > > + }; > > + }; > > + > > > > nmi_intc: interrupt-controller@1c00030 { > > > > compatible = "allwinner,sun7i-a20-sc-nmi"; > > interrupt-controller; > > > > @@ -451,6 +518,163 @@ > > > > #size-cells = <0>; > > > > }; > > > > + tcon_top: tcon-top@1c70000 { > > + compatible = "allwinner,sun8i-r40-tcon-top"; > > + reg = <0x01c70000 0x1000>; > > + clocks = <&ccu CLK_BUS_TCON_TOP>, > > + <&ccu CLK_TCON_TV0>, > > + <&ccu CLK_TVE0>, > > + <&ccu CLK_TCON_TV1>, > > + <&ccu CLK_TVE1>, > > + <&ccu CLK_DSI_DPHY>; > > + clock-names = "bus", > > + "tcon-tv0", > > + "tve0", > > + "tcon-tv1", > > + "tve1", > > + "dsi"; > > + clock-output-names = "tcon-top-tv0", > > + "tcon-top-tv1", > > + "tcon-top-dsi"; > > + resets = <&ccu RST_BUS_TCON_TOP>; > > + #clock-cells = <1>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + tcon_top_mixer0_in: port@0 { > > + reg = <0>; > > + > > + tcon_top_mixer0_in_mixer0: > > endpoint { + > > remote-endpoint = <&mixer0_out_tcon_top>; + > > }; > > + }; > > + > > + tcon_top_mixer0_out: port@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <1>; > > + > > + tcon_top_mixer0_out_tcon_lcd0: > > endpoint@0 { + reg = <0>; > > + }; > > + > > + tcon_top_mixer0_out_tcon_lcd1: > > endpoint@1 { + reg = <1>; > > + }; > > + > > + tcon_top_mixer0_out_tcon_tv0: > > endpoint@2 { + reg = <2>; > > + }; > > + > > + tcon_top_mixer0_out_tcon_tv1: > > endpoint@3 { + reg = <3>; > > + }; > > + }; > > + > > + tcon_top_mixer1_in: port@2 { > > + reg = <2>; > > + > > + tcon_top_mixer1_in_mixer1: > > endpoint { + > > remote-endpoint = <&mixer1_out_tcon_top>; + > > }; > > + }; > > + > > + tcon_top_mixer1_out: port@3 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <3>; > > + > > + tcon_top_mixer1_out_tcon_lcd0: > > endpoint@0 { + reg = <0>; > > + }; > > + > > + tcon_top_mixer1_out_tcon_lcd1: > > endpoint@1 { + reg = <1>; > > + }; > > + > > + tcon_top_mixer1_out_tcon_tv0: > > endpoint@2 { + reg = <2>; > > + }; > > + > > + tcon_top_mixer1_out_tcon_tv1: > > endpoint@3 { + reg = <3>; > > + }; > > + }; > > + > > + tcon_top_hdmi_in: port@4 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <4>; > > + > > + tcon_top_hdmi_in_tcon_tv0: > > endpoint@0 { + reg = <0>; > > + }; > > + > > + tcon_top_hdmi_in_tcon_tv1: > > endpoint@1 { + reg = <1>; > > + }; > > + }; > > + > > + tcon_top_hdmi_out: port@5 { > > + reg = <5>; > > + > > + tcon_top_hdmi_out_hdmi: endpoint { > > + remote-endpoint = > > <&hdmi_in_tcon_top>; + }; > > + }; > > + }; > > + }; > > + > > + tcon_tv0: lcd-controller@1c73000 { > > + compatible = "allwinner,sun8i-r40-tcon-tv", > > + "allwinner,sun8i-a83t-tcon-tv"; > > + reg = <0x01c73000 0x1000>; > > + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; > > + clock-names = "ahb", "tcon-ch1"; > > + resets = <&ccu RST_BUS_TCON_TV0>; > > + reset-names = "lcd"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + tcon_tv0_in: port@0 { > > + reg = <0>; > > + }; > > + > > + tcon_tv0_out: port@1 { > > + reg = <1>; > > + }; > > + }; > > + }; > > + > > + tcon_tv1: lcd-controller@1c74000 { > > + compatible = "allwinner,sun8i-r40-tcon-tv", > > + "allwinner,sun8i-a83t-tcon-tv"; > > + reg = <0x01c74000 0x1000>; > > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>; > > + clock-names = "ahb", "tcon-ch1"; > > + resets = <&ccu RST_BUS_TCON_TV1>; > > + reset-names = "lcd"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + tcon_tv1_in: port@0 { > > + reg = <0>; > > + }; > > + > > + tcon_tv1_out: port@1 { > > + reg = <1>; > > You are missing the remote-endpoints for all the TCON-TOP <-> TCON > connections. Also, on the driver side, there's no code to handle > dynamically mapping mixers to the TCONs that are being used. In the past we > had simple 1:1 mappings. This is no longer the case, and it needs to be > dealt with. How would TCON TOP driver know how to set muxes? There are no appropriate bingings for muxes, except for V4L2 subsystem, which doesn't really work here. Additionaly, how would HDMI know which TCON belongs to it to appropriately set possible_crtcs? Currently, my idea is that board DT creates wanted connections. Since there is only one valid connection for each mux, driver knows eactly what to write into mux register. HDMI driver can simply check which TCON connection is valid in HDMI input mux and select it in possible_crtcs. Please also note that mixer0 and mixer1 don't have same capabilities and you generally want mixer0 to be connected to main output. This is in contrast to DE1 SoCs, where both backends and both frontends have same capability. Best regards, Jernej > > ChenYu > > > + }; > > + }; > > + }; > > + > > > > gic: interrupt-controller@1c81000 { > > > > compatible = "arm,gic-400"; > > reg = <0x01c81000 0x1000>, > > > > @@ -461,6 +685,51 @@ > > > > #interrupt-cells = <3>; > > interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | > > IRQ_TYPE_LEVEL_HIGH)>; > > > > }; > > > > + > > + hdmi: hdmi@1ee0000 { > > + compatible = "allwinner,sun8i-r40-dw-hdmi", > > + "allwinner,sun8i-a83t-dw-hdmi"; > > + reg = <0x01ee0000 0x10000>; > > + reg-io-width = <1>; > > + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&ccu CLK_BUS_HDMI0>, <&ccu > > CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; > > + clock-names = "iahb", "isfr", "tmds"; > > + resets = <&ccu RST_BUS_HDMI1>; > > + reset-names = "ctrl"; > > + phys = <&hdmi_phy>; > > + phy-names = "hdmi-phy"; > > + status = "disabled"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + hdmi_in: port@0 { > > + reg = <0>; > > + > > + hdmi_in_tcon_top: endpoint { > > + remote-endpoint = > > <&tcon_top_hdmi_out_hdmi>; + }; > > + }; > > + > > + hdmi_out: port@1 { > > + reg = <1>; > > + }; > > + }; > > + }; > > + > > + hdmi_phy: hdmi-phy@1ef0000 { > > + compatible = "allwinner,sun8i-r40-hdmi-phy", > > + "allwinner,sun50i-a64-hdmi-phy"; > > + reg = <0x01ef0000 0x10000>; > > + clocks = <&ccu CLK_BUS_HDMI1>, <&ccu > > CLK_HDMI_SLOW>, + <&ccu 7>, <&ccu 16>; > > + clock-names = "bus", "mod", "pll-0", "pll-1"; > > + resets = <&ccu RST_BUS_HDMI0>; > > + reset-names = "phy"; > > + #phy-cells = <0>; > > + }; > > > > }; > > > > timer { > > > > -- > > 2.18.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 28, 2018 at 12:45 PM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > Dne četrtek, 28. junij 2018 ob 03:51:31 CEST je Chen-Yu Tsai napisal(a): >> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> > wrote: >> > TV TCONs (channel 1 only) are always connected to TV or HDMI encoder. >> > Because of that, all output endpoints on such TCON node will point to a >> > encoder which is part of component framework. >> > >> > Correct current graph traversing algorithm in such way that it doesn't >> > skip output enpoints with id 0 on TV TCONs. >> >> No. Our bindings say that endpoint 0 _is_ channel 0. For TCONs that don't >> have channel 0, it must be skipped. > > I'm not sure where this is stated. I read TCON binding again. Can you please > point me to it? https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt#L169 Our TCON driver still expects RGB or LVDS panel / bridges on endpoint 0. So I guess this was sort of implied historically. It's no longer true. This is something we should probably fix. In practice our drivers don't look at it (yet), but rely on the downstream encoder type to determine which channel to use. But please add the "allwinner,tcon-channel" property as specified in the binding. > So on TV TCONs on R40 (without channel 0) TVE would be endpoint 1 and HDMI > endpoint 2 (or the other way around)? Which one goes first doesn't quite matter. IIRC there's also a mux for TVE? ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 28, 2018 at 1:15 PM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > Dne četrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai napisal(a): >> On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec@siol.net> > wrote: >> > Add all entries needed for HDMI to function properly. >> > >> > Since R40 has highly configurable pipeline, both mixers and both TCON >> > TVs are added. Board specific DT should then connect them together >> > trough TCON TOP muxers to best fit the purpose of the board. >> > >> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> >> > --- >> > >> > arch/arm/boot/dts/sun8i-r40.dtsi | 269 +++++++++++++++++++++++++++++++ >> > 1 file changed, 269 insertions(+) >> > >> > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi >> > b/arch/arm/boot/dts/sun8i-r40.dtsi index 173dcc1652d2..a2a75fb04caf >> > 100644 >> > --- a/arch/arm/boot/dts/sun8i-r40.dtsi >> > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi >> > @@ -42,8 +42,11 @@ >> > >> > */ >> > >> > #include <dt-bindings/interrupt-controller/arm-gic.h> >> > >> > +#include <dt-bindings/clock/sun8i-de2.h> >> > >> > #include <dt-bindings/clock/sun8i-r40-ccu.h> >> > >> > +#include <dt-bindings/clock/sun8i-tcon-top.h> > > Maxime, above line breaks compilation for build robot, sorry. > >> > >> > #include <dt-bindings/reset/sun8i-r40-ccu.h> >> > >> > +#include <dt-bindings/reset/sun8i-de2.h> >> > >> > / { >> > >> > #address-cells = <1>; >> > >> > @@ -99,12 +102,76 @@ >> > >> > }; >> > >> > }; >> > >> > + de: display-engine { >> > + compatible = "allwinner,sun8i-r40-display-engine", >> > + "allwinner,sun8i-h3-display-engine"; >> >> Given that the display pipeline looks different, they should not be >> compatible. > > Ok. > >> >> > + allwinner,pipelines = <&mixer0>, <&mixer1>; >> > + status = "disabled"; >> > + }; >> > + >> > >> > soc { >> > >> > compatible = "simple-bus"; >> > #address-cells = <1>; >> > #size-cells = <1>; >> > ranges; >> > >> > + display_clocks: clock@1000000 { >> > + compatible = "allwinner,sun8i-r40-de2-clk", >> > + "allwinner,sun8i-h3-de2-clk"; >> > + reg = <0x01000000 0x100000>; >> > + clocks = <&ccu CLK_DE>, >> > + <&ccu CLK_BUS_DE>; >> > + clock-names = "mod", >> > + "bus"; >> > + resets = <&ccu RST_BUS_DE>; >> > + #clock-cells = <1>; >> > + #reset-cells = <1>; >> > + }; >> > + >> > + mixer0: mixer@1100000 { >> > + compatible = "allwinner,sun8i-r40-de2-mixer-0"; >> > + reg = <0x01100000 0x100000>; >> > + clocks = <&display_clocks CLK_BUS_MIXER0>, >> > + <&display_clocks CLK_MIXER0>; >> > + clock-names = "bus", >> > + "mod"; >> > + resets = <&display_clocks RST_MIXER0>; >> > + >> > + ports { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + mixer0_out: port@1 { >> > + reg = <1>; >> > + mixer0_out_tcon_top: endpoint { >> > + remote-endpoint = >> > <&tcon_top_mixer0_in_mixer0>; + }; >> > + }; >> > + }; >> > + }; >> > + >> > + mixer1: mixer@1200000 { >> > + compatible = "allwinner,sun8i-r40-de2-mixer-1"; >> > + reg = <0x01200000 0x100000>; >> > + clocks = <&display_clocks CLK_BUS_MIXER1>, >> > + <&display_clocks CLK_MIXER1>; >> > + clock-names = "bus", >> > + "mod"; >> > + resets = <&display_clocks RST_WB>; >> > + >> > + ports { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + mixer1_out: port@1 { >> > + reg = <1>; >> > + mixer1_out_tcon_top: endpoint { >> > + remote-endpoint = >> > <&tcon_top_mixer1_in_mixer1>; + }; >> > + }; >> > + }; >> > + }; >> > + >> > >> > nmi_intc: interrupt-controller@1c00030 { >> > >> > compatible = "allwinner,sun7i-a20-sc-nmi"; >> > interrupt-controller; >> > >> > @@ -451,6 +518,163 @@ >> > >> > #size-cells = <0>; >> > >> > }; >> > >> > + tcon_top: tcon-top@1c70000 { >> > + compatible = "allwinner,sun8i-r40-tcon-top"; >> > + reg = <0x01c70000 0x1000>; >> > + clocks = <&ccu CLK_BUS_TCON_TOP>, >> > + <&ccu CLK_TCON_TV0>, >> > + <&ccu CLK_TVE0>, >> > + <&ccu CLK_TCON_TV1>, >> > + <&ccu CLK_TVE1>, >> > + <&ccu CLK_DSI_DPHY>; >> > + clock-names = "bus", >> > + "tcon-tv0", >> > + "tve0", >> > + "tcon-tv1", >> > + "tve1", >> > + "dsi"; >> > + clock-output-names = "tcon-top-tv0", >> > + "tcon-top-tv1", >> > + "tcon-top-dsi"; >> > + resets = <&ccu RST_BUS_TCON_TOP>; >> > + #clock-cells = <1>; >> > + >> > + ports { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + tcon_top_mixer0_in: port@0 { >> > + reg = <0>; >> > + >> > + tcon_top_mixer0_in_mixer0: >> > endpoint { + >> > remote-endpoint = <&mixer0_out_tcon_top>; + >> > }; >> > + }; >> > + >> > + tcon_top_mixer0_out: port@1 { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + reg = <1>; >> > + >> > + tcon_top_mixer0_out_tcon_lcd0: >> > endpoint@0 { + reg = <0>; >> > + }; >> > + >> > + tcon_top_mixer0_out_tcon_lcd1: >> > endpoint@1 { + reg = <1>; >> > + }; >> > + >> > + tcon_top_mixer0_out_tcon_tv0: >> > endpoint@2 { + reg = <2>; >> > + }; >> > + >> > + tcon_top_mixer0_out_tcon_tv1: >> > endpoint@3 { + reg = <3>; >> > + }; >> > + }; >> > + >> > + tcon_top_mixer1_in: port@2 { >> > + reg = <2>; >> > + >> > + tcon_top_mixer1_in_mixer1: >> > endpoint { + >> > remote-endpoint = <&mixer1_out_tcon_top>; + >> > }; >> > + }; >> > + >> > + tcon_top_mixer1_out: port@3 { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + reg = <3>; >> > + >> > + tcon_top_mixer1_out_tcon_lcd0: >> > endpoint@0 { + reg = <0>; >> > + }; >> > + >> > + tcon_top_mixer1_out_tcon_lcd1: >> > endpoint@1 { + reg = <1>; >> > + }; >> > + >> > + tcon_top_mixer1_out_tcon_tv0: >> > endpoint@2 { + reg = <2>; >> > + }; >> > + >> > + tcon_top_mixer1_out_tcon_tv1: >> > endpoint@3 { + reg = <3>; >> > + }; >> > + }; >> > + >> > + tcon_top_hdmi_in: port@4 { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + reg = <4>; >> > + >> > + tcon_top_hdmi_in_tcon_tv0: >> > endpoint@0 { + reg = <0>; >> > + }; >> > + >> > + tcon_top_hdmi_in_tcon_tv1: >> > endpoint@1 { + reg = <1>; >> > + }; >> > + }; >> > + >> > + tcon_top_hdmi_out: port@5 { >> > + reg = <5>; >> > + >> > + tcon_top_hdmi_out_hdmi: endpoint { >> > + remote-endpoint = >> > <&hdmi_in_tcon_top>; + }; >> > + }; >> > + }; >> > + }; >> > + >> > + tcon_tv0: lcd-controller@1c73000 { >> > + compatible = "allwinner,sun8i-r40-tcon-tv", >> > + "allwinner,sun8i-a83t-tcon-tv"; >> > + reg = <0x01c73000 0x1000>; >> > + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; >> > + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; >> > + clock-names = "ahb", "tcon-ch1"; >> > + resets = <&ccu RST_BUS_TCON_TV0>; >> > + reset-names = "lcd"; >> > + >> > + ports { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + tcon_tv0_in: port@0 { >> > + reg = <0>; >> > + }; >> > + >> > + tcon_tv0_out: port@1 { >> > + reg = <1>; >> > + }; >> > + }; >> > + }; >> > + >> > + tcon_tv1: lcd-controller@1c74000 { >> > + compatible = "allwinner,sun8i-r40-tcon-tv", >> > + "allwinner,sun8i-a83t-tcon-tv"; >> > + reg = <0x01c74000 0x1000>; >> > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; >> > + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>; >> > + clock-names = "ahb", "tcon-ch1"; >> > + resets = <&ccu RST_BUS_TCON_TV1>; >> > + reset-names = "lcd"; >> > + >> > + ports { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + tcon_tv1_in: port@0 { >> > + reg = <0>; >> > + }; >> > + >> > + tcon_tv1_out: port@1 { >> > + reg = <1>; >> >> You are missing the remote-endpoints for all the TCON-TOP <-> TCON >> connections. Also, on the driver side, there's no code to handle >> dynamically mapping mixers to the TCONs that are being used. In the past we >> had simple 1:1 mappings. This is no longer the case, and it needs to be >> dealt with. > > How would TCON TOP driver know how to set muxes? There are no appropriate > bingings for muxes, except for V4L2 subsystem, which doesn't really work here. This will end up being a bunch of custom functions exported from the TCON TOP driver to the TCON driver. As for bindings, the stuff you already have is mostly enough. You do have to specify the endpoint ID vs component mapping, so you can find the correct one. For example, you would specify that the IDs for TCON LCDs be 0 and 1, and TCON TVs be 2 and 3. Matching the actual register values is a nice convenience. These would be used by the driver as the TCON ID. Also, we might want to consider them as two pairs of two TCONs (LCD + TV). The CRTC in DRM land is actually the mixer + TCON on our platform. This means we only have two CRTCs. So we could have CRTC 0 = mixer 0 + TCON LCD 0 + TCON TV 0. The "TCON_TVx_OUTSEL" and "DE_PORTx PERH Select" muxes would be set at run time in the mode set function, selecting either LCD or TV based on what encoder is attached. This limitation is a software one, and should not bleed over into the hardware representation. > Additionaly, how would HDMI know which TCON belongs to it to appropriately set > possible_crtcs? HDMI is connected to the two TCON TVs through the TCON TOP mux. We handle TCON output muxing in the TCON driver, using the set_mux callback in the quirks. For R40, this callback would probably call into the TCON TOP driver asking it to set the mux to some value. > Currently, my idea is that board DT creates wanted connections. Since there is > only one valid connection for each mux, driver knows eactly what to write into > mux register. HDMI driver can simply check which TCON connection is valid in > HDMI input mux and select it in possible_crtcs. But that is not how the actual hardware looks like. The device tree should model the hardware, not a subset of it just because one thinks the implementation is difficult or won't be used at all. Furthermore, I think you have it backwards. possible_crtcs is generated based on (in our case) the connections between TCON and HDMI based on the device tree graph. So if you have both hooked up, both will show up in possible_crtcs, but only one crtc will actually be selected to feed the HDMI encoder. If you really need to access the current crtc, the drm_encoder struct contains a pointer to it. In DE 1.0 driver, we leave all the muxing to the TCON driver. See https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/sun4i/sun4i_tcon.c#L537 So in a sense, the HDMI encoder should be and is hooked up to both TCONs, but only one is active at any given time. > Please also note that mixer0 and mixer1 don't have same capabilities and you > generally want mixer0 to be connected to main output. This is in contrast to > DE1 SoCs, where both backends and both frontends have same capability. Yes. But who's to say the two display outputs can't be reversed or swapped around? With fixed singular connections, you also rule out mirrored output. ChenYu >> >> ChenYu >> >> > + }; >> > + }; >> > + }; >> > + >> > >> > gic: interrupt-controller@1c81000 { >> > >> > compatible = "arm,gic-400"; >> > reg = <0x01c81000 0x1000>, >> > >> > @@ -461,6 +685,51 @@ >> > >> > #interrupt-cells = <3>; >> > interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | >> > IRQ_TYPE_LEVEL_HIGH)>; >> > >> > }; >> > >> > + >> > + hdmi: hdmi@1ee0000 { >> > + compatible = "allwinner,sun8i-r40-dw-hdmi", >> > + "allwinner,sun8i-a83t-dw-hdmi"; >> > + reg = <0x01ee0000 0x10000>; >> > + reg-io-width = <1>; >> > + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; >> > + clocks = <&ccu CLK_BUS_HDMI0>, <&ccu >> > CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; >> > + clock-names = "iahb", "isfr", "tmds"; >> > + resets = <&ccu RST_BUS_HDMI1>; >> > + reset-names = "ctrl"; >> > + phys = <&hdmi_phy>; >> > + phy-names = "hdmi-phy"; >> > + status = "disabled"; >> > + >> > + ports { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + hdmi_in: port@0 { >> > + reg = <0>; >> > + >> > + hdmi_in_tcon_top: endpoint { >> > + remote-endpoint = >> > <&tcon_top_hdmi_out_hdmi>; + }; >> > + }; >> > + >> > + hdmi_out: port@1 { >> > + reg = <1>; >> > + }; >> > + }; >> > + }; >> > + >> > + hdmi_phy: hdmi-phy@1ef0000 { >> > + compatible = "allwinner,sun8i-r40-hdmi-phy", >> > + "allwinner,sun50i-a64-hdmi-phy"; >> > + reg = <0x01ef0000 0x10000>; >> > + clocks = <&ccu CLK_BUS_HDMI1>, <&ccu >> > CLK_HDMI_SLOW>, + <&ccu 7>, <&ccu 16>; >> > + clock-names = "bus", "mod", "pll-0", "pll-1"; >> > + resets = <&ccu RST_BUS_HDMI0>; >> > + reset-names = "phy"; >> > + #phy-cells = <0>; >> > + }; >> > >> > }; >> > >> > timer { >> > >> > -- >> > 2.18.0 > > > > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 28, 2018 at 12:56 PM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > Dne četrtek, 28. junij 2018 ob 04:25:54 CEST je Chen-Yu Tsai napisal(a): >> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> > wrote: >> > Some DW HDMI PHYs, like those found in A64 and R40 SoCs, can select >> > between two clock parents. >> > >> > Add code which reads second PLL from DT. >> > >> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> >> >> This patch by itself does not do anything. It should be merged with the >> next one. > > Maxime said clock changes should be separated from DT changes. > http://lists.infradead.org/pipermail/linux-arm-kernel/2018-May/578775.html OK. I think the boundary between these two is bit blurred in this case. And I think implementing support for two or more parents, then actually adding the second parent makes more sense. ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jun 27, 2018 at 10:25:37PM +0200, Jernej Škrabec wrote: > Dne sreda, 27. junij 2018 ob 21:50:43 CEST je Maxime Ripard napisal(a): > > > > On Wed, Jun 27, 2018 at 08:02:15PM +0200, Maxime Ripard wrote: > > > On Mon, Jun 25, 2018 at 02:02:40PM +0200, Jernej Skrabec wrote: > > > > This series adds support for R40 HDMI pipeline. It is a bit special > > > > than other already supported pipelines because it has additional unit > > > > called TCON TOP responsible for relationship configuration between > > > > mixers, TCONs and HDMI. Additionally, it has additional gates for DSI > > > > and TV TCONs, TV encoder clock settings and pin muxing between LCD > > > > and TV encoders. > > > > > > > > However, it seems that TCON TOP will become a norm, since newer > > > > Allwinner SoCs like H6 also have this unit. > > > > > > > > I tested different possible configurations: > > > > - mixer0 <> TCON-TV0 <> HDMI > > > > - mixer0 <> TCON-TV1 <> HDMI > > > > - mixer1 <> TCON-TV0 <> HDMI > > > > - mixer1 <> TCON-TV1 <> HDMI > > > > > > > > Please review. > > > > > > I just applied it. It didn't apply cleanly, so please make sure it > > > does next time, or at least state what the dependencies are. > > > > And it didn't compile either, because of the compile error that was > > reported to the previous version by kbuild... Those shouldn't be > > ignored and simply fixed. > > Sorry about that. I forgot to rebase and had same linux-next base for all 3 > versions. > > I actually take a look at that kbuild message, but it just didn't make much > sense and it worked for me without issues. Merge conflicts would explain that. This was happening when the driver is compiled as a module, which is pointed by the config attached to the kbuild mail. And asking is definitely encouraged when you're confused about such things, ignoring it on the other hand, not so much. Maxime
On Thu, Jun 28, 2018 at 06:48:50AM +0200, Jernej Škrabec wrote: > Dne četrtek, 28. junij 2018 ob 04:06:52 CEST je Chen-Yu Tsai napisal(a): > > On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> > wrote: > > > Current "old" method to find engine worked pretty well for DE2. However, > > > it doesn't work when TCON TOP is between mixer (engine) and TCON. TCON > > > TOP has multiple input ports, but current engine search algorithm > > > expects only one. > > > > > > This can be fixed by first looking for output port id and selecting > > > matching input by subtracting 1 for the next round. This work even if > > > there is only one input and output. > > > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > > --- > > > > > > drivers/gpu/drm/sun4i/sun4i_tcon.c | 22 ++++++++++++++++++---- > > > 1 file changed, 18 insertions(+), 4 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 08747fc3ee71..264bcc43da11 > > > 100644 > > > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > @@ -791,12 +791,14 @@ static int sun4i_tcon_init_regmap(struct device > > > *dev, > > > > > > */ > > > > > > static struct sunxi_engine * > > > sun4i_tcon_find_engine_traverse(struct sun4i_drv *drv, > > > > > > - struct device_node *node) > > > + struct device_node *node, > > > + u32 port_id) > > > > > > { > > > > > > struct device_node *port, *ep, *remote; > > > struct sunxi_engine *engine = ERR_PTR(-EINVAL); > > > > > > + u32 reg = 0; > > > > > > - port = of_graph_get_port_by_id(node, 0); > > > + port = of_graph_get_port_by_id(node, port_id); > > > > > > if (!port) > > > > > > return ERR_PTR(-EINVAL); > > > > > > @@ -826,8 +828,20 @@ sun4i_tcon_find_engine_traverse(struct sun4i_drv > > > *drv, > > > > > > if (remote == engine->node) > > > > > > goto out_put_remote; > > > > > > + /* > > > + * According to device tree binding input ports have even id > > > + * number and output ports have odd id. Since component with > > > + * more than one input and one output (TCON TOP) exits, correct > > > + * remote input id has to be calculated by subtracting 1 from > > > + * remote output id. If this for some reason can't be done, 0 > > > + * is used as input port id. > > > + */ > > > > You need to call > > > > of_node_put(port); > > > > to drop the reference to the original port. > > Thanks for noticing it. I guess I should send fix patch, since patches from > drm-misc-next can't be dropped. Yeah, please send additional patches for all the issues pointed out by Chen-Yu. Maxime
Dne četrtek, 28. junij 2018 ob 20:25:43 CEST je Maxime Ripard napisal(a): > On Thu, Jun 28, 2018 at 06:48:50AM +0200, Jernej Škrabec wrote: > > Dne četrtek, 28. junij 2018 ob 04:06:52 CEST je Chen-Yu Tsai napisal(a): > > > On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec > > > <jernej.skrabec@siol.net> > > > > wrote: > > > > Current "old" method to find engine worked pretty well for DE2. > > > > However, > > > > it doesn't work when TCON TOP is between mixer (engine) and TCON. > > > > TCON > > > > TOP has multiple input ports, but current engine search algorithm > > > > expects only one. > > > > > > > > This can be fixed by first looking for output port id and selecting > > > > matching input by subtracting 1 for the next round. This work even if > > > > there is only one input and output. > > > > > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > > > --- > > > > > > > > drivers/gpu/drm/sun4i/sun4i_tcon.c | 22 ++++++++++++++++++---- > > > > 1 file changed, 18 insertions(+), 4 deletions(-) > > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 08747fc3ee71..264bcc43da11 > > > > 100644 > > > > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > @@ -791,12 +791,14 @@ static int sun4i_tcon_init_regmap(struct device > > > > *dev, > > > > > > > > */ > > > > > > > > static struct sunxi_engine * > > > > sun4i_tcon_find_engine_traverse(struct sun4i_drv *drv, > > > > > > > > - struct device_node *node) > > > > + struct device_node *node, > > > > + u32 port_id) > > > > > > > > { > > > > > > > > struct device_node *port, *ep, *remote; > > > > struct sunxi_engine *engine = ERR_PTR(-EINVAL); > > > > > > > > + u32 reg = 0; > > > > > > > > - port = of_graph_get_port_by_id(node, 0); > > > > + port = of_graph_get_port_by_id(node, port_id); > > > > > > > > if (!port) > > > > > > > > return ERR_PTR(-EINVAL); > > > > > > > > @@ -826,8 +828,20 @@ sun4i_tcon_find_engine_traverse(struct sun4i_drv > > > > *drv, > > > > > > > > if (remote == engine->node) > > > > > > > > goto out_put_remote; > > > > > > > > + /* > > > > + * According to device tree binding input ports have even id > > > > + * number and output ports have odd id. Since component with > > > > + * more than one input and one output (TCON TOP) exits, > > > > correct > > > > + * remote input id has to be calculated by subtracting 1 from > > > > + * remote output id. If this for some reason can't be done, 0 > > > > + * is used as input port id. > > > > + */ > > > > > > You need to call > > > > > > of_node_put(port); > > > > > > to drop the reference to the original port. > > > > Thanks for noticing it. I guess I should send fix patch, since patches > > from > > drm-misc-next can't be dropped. > > Yeah, please send additional patches for all the issues pointed out by > Chen-Yu. Of course. I hope this can be resolved till the end of the next week. After that, I will be away from PC for 2 weeks. Feel free to drop DT patches if you think that it will come too close to merge window. Best regards, Jernej -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne četrtek, 28. junij 2018 ob 03:47:20 CEST je Chen-Yu Tsai napisal(a): > Hi, > > So I'm late to the party, but... > > On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > > As already described in DT binding, TCON TOP is responsible for > > configuring display pipeline. In this initial driver focus is on HDMI > > pipeline, so TVE and LCD configuration is not implemented. > > > > Implemented features: > > - HDMI source selection > > - clock driver (TCON and DSI gating) > > - connecting mixers and TCONS > > > > Something similar also existed in previous SoCs, except that it was part > > of first TCON. > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > --- > > > > drivers/gpu/drm/sun4i/Makefile | 3 +- > > drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 300 +++++++++++++++++++++++++ > > drivers/gpu/drm/sun4i/sun8i_tcon_top.h | 40 ++++ > > 3 files changed, 342 insertions(+), 1 deletion(-) > > create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.c > > create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.h > > > > diff --git a/drivers/gpu/drm/sun4i/Makefile > > b/drivers/gpu/drm/sun4i/Makefile index 2589f4acd5ae..09fbfd6304ba 100644 > > --- a/drivers/gpu/drm/sun4i/Makefile > > +++ b/drivers/gpu/drm/sun4i/Makefile > > @@ -16,7 +16,8 @@ sun8i-drm-hdmi-y += sun8i_hdmi_phy_clk.o > > > > sun8i-mixer-y += sun8i_mixer.o sun8i_ui_layer.o \ > > > > sun8i_vi_layer.o sun8i_ui_scaler.o \ > > > > - sun8i_vi_scaler.o sun8i_csc.o > > + sun8i_vi_scaler.o sun8i_csc.o \ > > + sun8i_tcon_top.o > > > > sun4i-tcon-y += sun4i_crtc.o > > sun4i-tcon-y += sun4i_dotclock.o > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c > > b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c new file mode 100644 > > index 000000000000..8da0460e0028 > > --- /dev/null > > +++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c > > @@ -0,0 +1,300 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* Copyright (c) 2018 Jernej Skrabec <jernej.skrabec@siol.net> */ > > + > > +#include <drm/drmP.h> > > + > > +#include <dt-bindings/clock/sun8i-tcon-top.h> > > + > > +#include <linux/bitfield.h> > > +#include <linux/component.h> > > +#include <linux/device.h> > > +#include <linux/module.h> > > +#include <linux/of_graph.h> > > +#include <linux/platform_device.h> > > + > > +#include "sun8i_tcon_top.h" > > + > > +static int sun8i_tcon_top_get_connected_ep_id(struct device_node *node, > > + int port_id) > > +{ > > + struct device_node *ep, *remote, *port; > > + struct of_endpoint endpoint; > > + > > + port = of_graph_get_port_by_id(node, port_id); > > + if (!port) > > + return -ENOENT; > > + > > + for_each_available_child_of_node(port, ep) { > > + remote = of_graph_get_remote_port_parent(ep); > > + if (!remote) > > + continue; > > + > > + if (of_device_is_available(remote)) { > > + of_graph_parse_endpoint(ep, &endpoint); > > + > > + of_node_put(remote); > > + > > + return endpoint.id; > > + } > > + > > + of_node_put(remote); > > + } > > + > > + return -ENOENT; > > +} > > + > > +static struct clk_hw *sun8i_tcon_top_register_gate(struct device *dev, > > + struct clk *parent, > > + void __iomem *regs, > > + spinlock_t *lock, > > + u8 bit, int name_index) > > +{ > > + const char *clk_name, *parent_name; > > + int ret; > > + > > + parent_name = __clk_get_name(parent); > > You can simply pass in the binding clock name, and have > > index = of_property_match_string(np, "clock-names", name); > parent_name = of_clk_get_parent_name(dev->of_node, index); That is elegant solution. Should I include that in follow up series? Best regards, Jernej > > > + ret = of_property_read_string_index(dev->of_node, > > + "clock-output-names", > > name_index, + &clk_name); > > + if (ret) > > + return ERR_PTR(ret); > > + > > + return clk_hw_register_gate(dev, clk_name, parent_name, > > + CLK_SET_RATE_PARENT, > > + regs + TCON_TOP_GATE_SRC_REG, > > + bit, 0, lock); > > +}; > > + > > +static int sun8i_tcon_top_bind(struct device *dev, struct device *master, > > + void *data) > > +{ > > + struct platform_device *pdev = to_platform_device(dev); > > + struct clk *dsi, *tcon_tv0, *tcon_tv1, *tve0, *tve1; > > + struct clk_hw_onecell_data *clk_data; > > + struct sun8i_tcon_top *tcon_top; > > + bool mixer0_unused = false; > > + struct resource *res; > > + void __iomem *regs; > > + int ret, i, id; > > + u32 val; > > + > > + tcon_top = devm_kzalloc(dev, sizeof(*tcon_top), GFP_KERNEL); > > + if (!tcon_top) > > + return -ENOMEM; > > + > > + clk_data = devm_kzalloc(dev, sizeof(*clk_data) + > > + sizeof(*clk_data->hws) * CLK_NUM, > > + GFP_KERNEL); > > + if (!clk_data) > > + return -ENOMEM; > > + tcon_top->clk_data = clk_data; > > + > > + spin_lock_init(&tcon_top->reg_lock); > > + > > + tcon_top->rst = devm_reset_control_get(dev, NULL); > > + if (IS_ERR(tcon_top->rst)) { > > + dev_err(dev, "Couldn't get our reset line\n"); > > + return PTR_ERR(tcon_top->rst); > > + } > > + > > + tcon_top->bus = devm_clk_get(dev, "bus"); > > + if (IS_ERR(tcon_top->bus)) { > > + dev_err(dev, "Couldn't get the bus clock\n"); > > + return PTR_ERR(tcon_top->bus); > > + } > > + > > + dsi = devm_clk_get(dev, "dsi"); > > + if (IS_ERR(dsi)) { > > + dev_err(dev, "Couldn't get the dsi clock\n"); > > + return PTR_ERR(dsi); > > + } > > + > > + tcon_tv0 = devm_clk_get(dev, "tcon-tv0"); > > + if (IS_ERR(tcon_tv0)) { > > + dev_err(dev, "Couldn't get the tcon-tv0 clock\n"); > > + return PTR_ERR(tcon_tv0); > > + } > > + > > + tcon_tv1 = devm_clk_get(dev, "tcon-tv1"); > > + if (IS_ERR(tcon_tv1)) { > > + dev_err(dev, "Couldn't get the tcon-tv1 clock\n"); > > + return PTR_ERR(tcon_tv1); > > + } > > + > > + tve0 = devm_clk_get(dev, "tve0"); > > + if (IS_ERR(tve0)) { > > + dev_err(dev, "Couldn't get the tve0 clock\n"); > > + return PTR_ERR(tve0); > > + } > > + > > + tve1 = devm_clk_get(dev, "tve1"); > > + if (IS_ERR(tve1)) { > > + dev_err(dev, "Couldn't get the tve1 clock\n"); > > + return PTR_ERR(tve1); > > + } > > So you don't actually have to hold references to the parent clocks. > > ChenYu > > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + regs = devm_ioremap_resource(dev, res); > > + if (IS_ERR(regs)) > > + return PTR_ERR(regs); > > + > > + ret = reset_control_deassert(tcon_top->rst); > > + if (ret) { > > + dev_err(dev, "Could not deassert ctrl reset control\n"); > > + return ret; > > + } > > + > > + ret = clk_prepare_enable(tcon_top->bus); > > + if (ret) { > > + dev_err(dev, "Could not enable bus clock\n"); > > + goto err_assert_reset; > > + } > > + > > + val = 0; > > + > > + /* check if HDMI mux output is connected */ > > + if (sun8i_tcon_top_get_connected_ep_id(dev->of_node, 5) >= 0) { > > + /* find HDMI input endpoint id, if it is connected at > > all*/ > > + id = sun8i_tcon_top_get_connected_ep_id(dev->of_node, 4); > > + if (id >= 0) > > + val = FIELD_PREP(TCON_TOP_HDMI_SRC_MSK, id + 1); > > + else > > + DRM_DEBUG_DRIVER("TCON TOP HDMI input is not > > connected\n"); + } else { > > + DRM_DEBUG_DRIVER("TCON TOP HDMI output is not > > connected\n"); + } > > + > > + writel(val, regs + TCON_TOP_GATE_SRC_REG); > > + > > + val = 0; > > + > > + /* process mixer0 mux output */ > > + id = sun8i_tcon_top_get_connected_ep_id(dev->of_node, 1); > > + if (id >= 0) { > > + val = FIELD_PREP(TCON_TOP_PORT_DE0_MSK, id); > > + } else { > > + DRM_DEBUG_DRIVER("TCON TOP mixer0 output is not > > connected\n"); + mixer0_unused = true; > > + } > > + > > + /* process mixer1 mux output */ > > + id = sun8i_tcon_top_get_connected_ep_id(dev->of_node, 3); > > + if (id >= 0) { > > + val |= FIELD_PREP(TCON_TOP_PORT_DE1_MSK, id); > > + > > + /* > > + * mixer0 mux has priority over mixer1 mux. We have to > > + * make sure mixer0 doesn't overtake TCON from mixer1. > > + */ > > + if (mixer0_unused && id == 0) > > + val |= FIELD_PREP(TCON_TOP_PORT_DE0_MSK, 1); > > + } else { > > + DRM_DEBUG_DRIVER("TCON TOP mixer1 output is not > > connected\n"); + } > > + > > + writel(val, regs + TCON_TOP_PORT_SEL_REG); > > + > > + /* > > + * TCON TOP has two muxes, which select parent clock for each TCON > > TV + * channel clock. Parent could be either TCON TV or TVE clock. > > For now + * we leave this fixed to TCON TV, since TVE driver for > > R40 is not yet + * implemented. Once it is, graph needs to be > > traversed to determine + * if TVE is active on each TCON TV. If it > > is, mux should be switched + * to TVE clock parent. > > + */ > > + clk_data->hws[CLK_TCON_TOP_TV0] = > > + sun8i_tcon_top_register_gate(dev, tcon_tv0, regs, > > + &tcon_top->reg_lock, > > + TCON_TOP_TCON_TV0_GATE, 0); > > + > > + clk_data->hws[CLK_TCON_TOP_TV1] = > > + sun8i_tcon_top_register_gate(dev, tcon_tv1, regs, > > + &tcon_top->reg_lock, > > + TCON_TOP_TCON_TV1_GATE, 1); > > + > > + clk_data->hws[CLK_TCON_TOP_DSI] = > > + sun8i_tcon_top_register_gate(dev, dsi, regs, > > + &tcon_top->reg_lock, > > + TCON_TOP_TCON_DSI_GATE, 2); > > + > > + for (i = 0; i < CLK_NUM; i++) > > + if (IS_ERR(clk_data->hws[i])) { > > + ret = PTR_ERR(clk_data->hws[i]); > > + goto err_unregister_gates; > > + } > > + > > + clk_data->num = CLK_NUM; > > + > > + ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, > > + clk_data); > > + if (ret) > > + goto err_unregister_gates; > > + > > + dev_set_drvdata(dev, tcon_top); > > + > > + return 0; > > + > > +err_unregister_gates: > > + for (i = 0; i < CLK_NUM; i++) > > + if (clk_data->hws[i]) > > + clk_hw_unregister_gate(clk_data->hws[i]); > > + clk_disable_unprepare(tcon_top->bus); > > +err_assert_reset: > > + reset_control_assert(tcon_top->rst); > > + > > + return ret; > > +} > > + > > +static void sun8i_tcon_top_unbind(struct device *dev, struct device > > *master, + void *data) > > +{ > > + struct sun8i_tcon_top *tcon_top = dev_get_drvdata(dev); > > + struct clk_hw_onecell_data *clk_data = tcon_top->clk_data; > > + int i; > > + > > + of_clk_del_provider(dev->of_node); > > + for (i = 0; i < CLK_NUM; i++) > > + clk_hw_unregister_gate(clk_data->hws[i]); > > + > > + clk_disable_unprepare(tcon_top->bus); > > + reset_control_assert(tcon_top->rst); > > +} > > + > > +static const struct component_ops sun8i_tcon_top_ops = { > > + .bind = sun8i_tcon_top_bind, > > + .unbind = sun8i_tcon_top_unbind, > > +}; > > + > > +static int sun8i_tcon_top_probe(struct platform_device *pdev) > > +{ > > + return component_add(&pdev->dev, &sun8i_tcon_top_ops); > > +} > > + > > +static int sun8i_tcon_top_remove(struct platform_device *pdev) > > +{ > > + component_del(&pdev->dev, &sun8i_tcon_top_ops); > > + > > + return 0; > > +} > > + > > +/* sun4i_drv uses this list to check if a device node is a TCON TOP */ > > +const struct of_device_id sun8i_tcon_top_of_table[] = { > > + { .compatible = "allwinner,sun8i-r40-tcon-top" }, > > + { /* sentinel */ } > > +}; > > +MODULE_DEVICE_TABLE(of, sun8i_tcon_top_of_table); > > +EXPORT_SYMBOL(sun8i_tcon_top_of_table); > > + > > +static struct platform_driver sun8i_tcon_top_platform_driver = { > > + .probe = sun8i_tcon_top_probe, > > + .remove = sun8i_tcon_top_remove, > > + .driver = { > > + .name = "sun8i-tcon-top", > > + .of_match_table = sun8i_tcon_top_of_table, > > + }, > > +}; > > +module_platform_driver(sun8i_tcon_top_platform_driver); > > + > > +MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@siol.net>"); > > +MODULE_DESCRIPTION("Allwinner R40 TCON TOP driver"); > > +MODULE_LICENSE("GPL"); > > diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.h > > b/drivers/gpu/drm/sun4i/sun8i_tcon_top.h new file mode 100644 > > index 000000000000..39838bbfeaee > > --- /dev/null > > +++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.h > > @@ -0,0 +1,40 @@ > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > +/* Copyright (c) 2018 Jernej Skrabec <jernej.skrabec@siol.net> */ > > + > > +#ifndef _SUN8I_TCON_TOP_H_ > > +#define _SUN8I_TCON_TOP_H_ > > + > > +#include <linux/clk.h> > > +#include <linux/clk-provider.h> > > +#include <linux/reset.h> > > +#include <linux/spinlock.h> > > + > > +#define TCON_TOP_TCON_TV_SETUP_REG 0x00 > > + > > +#define TCON_TOP_PORT_SEL_REG 0x1C > > +#define TCON_TOP_PORT_DE0_MSK GENMASK(1, 0) > > +#define TCON_TOP_PORT_DE1_MSK GENMASK(5, 4) > > + > > +#define TCON_TOP_GATE_SRC_REG 0x20 > > +#define TCON_TOP_HDMI_SRC_MSK GENMASK(29, 28) > > +#define TCON_TOP_TCON_TV1_GATE 24 > > +#define TCON_TOP_TCON_TV0_GATE 20 > > +#define TCON_TOP_TCON_DSI_GATE 16 > > + > > +#define CLK_NUM 3 > > + > > +struct sun8i_tcon_top { > > + struct clk *bus; > > + struct clk_hw_onecell_data *clk_data; > > + struct reset_control *rst; > > + > > + /* > > + * spinlock is used to synchronize access to same > > + * register where multiple clock gates can be set. > > + */ > > + spinlock_t reg_lock; > > +}; > > + > > +extern const struct of_device_id sun8i_tcon_top_of_table[]; > > + > > +#endif /* _SUN8I_TCON_TOP_H_ */ > > -- > > 2.18.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne četrtek, 28. junij 2018 ob 03:53:36 CEST je Chen-Yu Tsai napisal(a): > On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > > sun4i_drv_add_endpoints() has a memory leak since it uses of_node_put() > > when remote is equal to NULL and does nothing when remote has a valid > > pointer. > > > > Invert the logic to fix memory leak. > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > Given this is a fix, it should have Fixes and stable tags. How should be this handled given that the patch is already merged and cannot be dropped? Best regards, Jernej -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne četrtek, 28. junij 2018 ob 04:22:36 CEST je Chen-Yu Tsai napisal(a): > On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > > Current DW HDMI PHY code never prepares and enables PHY clock after it is > > created. It's just used as it is. This may work in some cases, but it's > > clearly wrong. Fix it by adding proper calls to enable/disable PHY > > clock. > > > > Fixes: 4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant") > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > So why does it work on the H3? Because there's only one PLL that the whole > display pipeline uses? > > We should probably tag this for stable. So, > > Cc: <stable@vger.kernel.org> > Reviewed-by: Chen-Yu Tsai <wens@csie.org> Same question as before, how this should be handled? Can I send separate patch with same content to stable ML only? Best regards, Jernej -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne četrtek, 28. junij 2018 ob 04:24:02 CEST je Chen-Yu Tsai napisal(a): > On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote: > > DW HDMI PHY driver and PHY clock driver share same registers. Make sure > > that DW HDMI PHY setup code doesn't change any clock related bits. > > During initialization, set PHY PLL parent bit to 0. > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > Reviewed-by: Chen-Yu Tsai <wens@csie.org> > > and maybe a fixes tag? No need for fixes tag here. H3 and H5 HDMI PHYs have only one possible parent clock. Without this patch, 0 is always written in parent clock bit, which correctly selects first parent. This is preparation patch for 2 clock parents support. Best regards, Jernej -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Jun 30, 2018 at 3:15 AM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > Dne četrtek, 28. junij 2018 ob 03:53:36 CEST je Chen-Yu Tsai napisal(a): >> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> > wrote: >> > sun4i_drv_add_endpoints() has a memory leak since it uses of_node_put() >> > when remote is equal to NULL and does nothing when remote has a valid >> > pointer. >> > >> > Invert the logic to fix memory leak. >> > >> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> >> >> Given this is a fix, it should have Fixes and stable tags. > > How should be this handled given that the patch is already merged and cannot > be dropped? We can't. We'll have to manually submit it for stable once this lands in Linus' tree. ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Jun 30, 2018 at 3:19 AM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > Dne četrtek, 28. junij 2018 ob 04:22:36 CEST je Chen-Yu Tsai napisal(a): >> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> > wrote: >> > Current DW HDMI PHY code never prepares and enables PHY clock after it is >> > created. It's just used as it is. This may work in some cases, but it's >> > clearly wrong. Fix it by adding proper calls to enable/disable PHY >> > clock. >> > >> > Fixes: 4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant") >> > >> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> >> >> So why does it work on the H3? Because there's only one PLL that the whole >> display pipeline uses? >> >> We should probably tag this for stable. So, >> >> Cc: <stable@vger.kernel.org> >> Reviewed-by: Chen-Yu Tsai <wens@csie.org> > > Same question as before, how this should be handled? Can I send separate patch > with same content to stable ML only? Yes, including the hash of the commit which is already in Linus' tree. So you have to send it after the next -rc1. ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Jun 30, 2018 at 3:09 AM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > Dne četrtek, 28. junij 2018 ob 03:47:20 CEST je Chen-Yu Tsai napisal(a): >> Hi, >> >> So I'm late to the party, but... >> >> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> > wrote: >> > As already described in DT binding, TCON TOP is responsible for >> > configuring display pipeline. In this initial driver focus is on HDMI >> > pipeline, so TVE and LCD configuration is not implemented. >> > >> > Implemented features: >> > - HDMI source selection >> > - clock driver (TCON and DSI gating) >> > - connecting mixers and TCONS >> > >> > Something similar also existed in previous SoCs, except that it was part >> > of first TCON. >> > >> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> >> > --- >> > >> > drivers/gpu/drm/sun4i/Makefile | 3 +- >> > drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 300 +++++++++++++++++++++++++ >> > drivers/gpu/drm/sun4i/sun8i_tcon_top.h | 40 ++++ >> > 3 files changed, 342 insertions(+), 1 deletion(-) >> > create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.c >> > create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.h >> > >> > diff --git a/drivers/gpu/drm/sun4i/Makefile >> > b/drivers/gpu/drm/sun4i/Makefile index 2589f4acd5ae..09fbfd6304ba 100644 >> > --- a/drivers/gpu/drm/sun4i/Makefile >> > +++ b/drivers/gpu/drm/sun4i/Makefile >> > @@ -16,7 +16,8 @@ sun8i-drm-hdmi-y += sun8i_hdmi_phy_clk.o >> > >> > sun8i-mixer-y += sun8i_mixer.o sun8i_ui_layer.o \ >> > >> > sun8i_vi_layer.o sun8i_ui_scaler.o \ >> > >> > - sun8i_vi_scaler.o sun8i_csc.o >> > + sun8i_vi_scaler.o sun8i_csc.o \ >> > + sun8i_tcon_top.o >> > >> > sun4i-tcon-y += sun4i_crtc.o >> > sun4i-tcon-y += sun4i_dotclock.o >> > >> > diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c >> > b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c new file mode 100644 >> > index 000000000000..8da0460e0028 >> > --- /dev/null >> > +++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c >> > @@ -0,0 +1,300 @@ >> > +// SPDX-License-Identifier: GPL-2.0+ >> > +/* Copyright (c) 2018 Jernej Skrabec <jernej.skrabec@siol.net> */ >> > + >> > +#include <drm/drmP.h> >> > + >> > +#include <dt-bindings/clock/sun8i-tcon-top.h> >> > + >> > +#include <linux/bitfield.h> >> > +#include <linux/component.h> >> > +#include <linux/device.h> >> > +#include <linux/module.h> >> > +#include <linux/of_graph.h> >> > +#include <linux/platform_device.h> >> > + >> > +#include "sun8i_tcon_top.h" >> > + >> > +static int sun8i_tcon_top_get_connected_ep_id(struct device_node *node, >> > + int port_id) >> > +{ >> > + struct device_node *ep, *remote, *port; >> > + struct of_endpoint endpoint; >> > + >> > + port = of_graph_get_port_by_id(node, port_id); >> > + if (!port) >> > + return -ENOENT; >> > + >> > + for_each_available_child_of_node(port, ep) { >> > + remote = of_graph_get_remote_port_parent(ep); >> > + if (!remote) >> > + continue; >> > + >> > + if (of_device_is_available(remote)) { >> > + of_graph_parse_endpoint(ep, &endpoint); >> > + >> > + of_node_put(remote); >> > + >> > + return endpoint.id; >> > + } >> > + >> > + of_node_put(remote); >> > + } >> > + >> > + return -ENOENT; >> > +} >> > + >> > +static struct clk_hw *sun8i_tcon_top_register_gate(struct device *dev, >> > + struct clk *parent, >> > + void __iomem *regs, >> > + spinlock_t *lock, >> > + u8 bit, int name_index) >> > +{ >> > + const char *clk_name, *parent_name; >> > + int ret; >> > + >> > + parent_name = __clk_get_name(parent); >> >> You can simply pass in the binding clock name, and have >> >> index = of_property_match_string(np, "clock-names", name); >> parent_name = of_clk_get_parent_name(dev->of_node, index); > > That is elegant solution. Should I include that in follow up series? If you have time for it, go ahead. This is just cleanup, so there's no urgency. If not, I suppose I could do it later on. ChenYu > Best regards, > Jernej > >> >> > + ret = of_property_read_string_index(dev->of_node, >> > + "clock-output-names", >> > name_index, + &clk_name); >> > + if (ret) >> > + return ERR_PTR(ret); >> > + >> > + return clk_hw_register_gate(dev, clk_name, parent_name, >> > + CLK_SET_RATE_PARENT, >> > + regs + TCON_TOP_GATE_SRC_REG, >> > + bit, 0, lock); >> > +}; >> > + >> > +static int sun8i_tcon_top_bind(struct device *dev, struct device *master, >> > + void *data) >> > +{ >> > + struct platform_device *pdev = to_platform_device(dev); >> > + struct clk *dsi, *tcon_tv0, *tcon_tv1, *tve0, *tve1; >> > + struct clk_hw_onecell_data *clk_data; >> > + struct sun8i_tcon_top *tcon_top; >> > + bool mixer0_unused = false; >> > + struct resource *res; >> > + void __iomem *regs; >> > + int ret, i, id; >> > + u32 val; >> > + >> > + tcon_top = devm_kzalloc(dev, sizeof(*tcon_top), GFP_KERNEL); >> > + if (!tcon_top) >> > + return -ENOMEM; >> > + >> > + clk_data = devm_kzalloc(dev, sizeof(*clk_data) + >> > + sizeof(*clk_data->hws) * CLK_NUM, >> > + GFP_KERNEL); >> > + if (!clk_data) >> > + return -ENOMEM; >> > + tcon_top->clk_data = clk_data; >> > + >> > + spin_lock_init(&tcon_top->reg_lock); >> > + >> > + tcon_top->rst = devm_reset_control_get(dev, NULL); >> > + if (IS_ERR(tcon_top->rst)) { >> > + dev_err(dev, "Couldn't get our reset line\n"); >> > + return PTR_ERR(tcon_top->rst); >> > + } >> > + >> > + tcon_top->bus = devm_clk_get(dev, "bus"); >> > + if (IS_ERR(tcon_top->bus)) { >> > + dev_err(dev, "Couldn't get the bus clock\n"); >> > + return PTR_ERR(tcon_top->bus); >> > + } >> > + >> > + dsi = devm_clk_get(dev, "dsi"); >> > + if (IS_ERR(dsi)) { >> > + dev_err(dev, "Couldn't get the dsi clock\n"); >> > + return PTR_ERR(dsi); >> > + } >> > + >> > + tcon_tv0 = devm_clk_get(dev, "tcon-tv0"); >> > + if (IS_ERR(tcon_tv0)) { >> > + dev_err(dev, "Couldn't get the tcon-tv0 clock\n"); >> > + return PTR_ERR(tcon_tv0); >> > + } >> > + >> > + tcon_tv1 = devm_clk_get(dev, "tcon-tv1"); >> > + if (IS_ERR(tcon_tv1)) { >> > + dev_err(dev, "Couldn't get the tcon-tv1 clock\n"); >> > + return PTR_ERR(tcon_tv1); >> > + } >> > + >> > + tve0 = devm_clk_get(dev, "tve0"); >> > + if (IS_ERR(tve0)) { >> > + dev_err(dev, "Couldn't get the tve0 clock\n"); >> > + return PTR_ERR(tve0); >> > + } >> > + >> > + tve1 = devm_clk_get(dev, "tve1"); >> > + if (IS_ERR(tve1)) { >> > + dev_err(dev, "Couldn't get the tve1 clock\n"); >> > + return PTR_ERR(tve1); >> > + } >> >> So you don't actually have to hold references to the parent clocks. >> >> ChenYu >> >> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> > + regs = devm_ioremap_resource(dev, res); >> > + if (IS_ERR(regs)) >> > + return PTR_ERR(regs); >> > + >> > + ret = reset_control_deassert(tcon_top->rst); >> > + if (ret) { >> > + dev_err(dev, "Could not deassert ctrl reset control\n"); >> > + return ret; >> > + } >> > + >> > + ret = clk_prepare_enable(tcon_top->bus); >> > + if (ret) { >> > + dev_err(dev, "Could not enable bus clock\n"); >> > + goto err_assert_reset; >> > + } >> > + >> > + val = 0; >> > + >> > + /* check if HDMI mux output is connected */ >> > + if (sun8i_tcon_top_get_connected_ep_id(dev->of_node, 5) >= 0) { >> > + /* find HDMI input endpoint id, if it is connected at >> > all*/ >> > + id = sun8i_tcon_top_get_connected_ep_id(dev->of_node, 4); >> > + if (id >= 0) >> > + val = FIELD_PREP(TCON_TOP_HDMI_SRC_MSK, id + 1); >> > + else >> > + DRM_DEBUG_DRIVER("TCON TOP HDMI input is not >> > connected\n"); + } else { >> > + DRM_DEBUG_DRIVER("TCON TOP HDMI output is not >> > connected\n"); + } >> > + >> > + writel(val, regs + TCON_TOP_GATE_SRC_REG); >> > + >> > + val = 0; >> > + >> > + /* process mixer0 mux output */ >> > + id = sun8i_tcon_top_get_connected_ep_id(dev->of_node, 1); >> > + if (id >= 0) { >> > + val = FIELD_PREP(TCON_TOP_PORT_DE0_MSK, id); >> > + } else { >> > + DRM_DEBUG_DRIVER("TCON TOP mixer0 output is not >> > connected\n"); + mixer0_unused = true; >> > + } >> > + >> > + /* process mixer1 mux output */ >> > + id = sun8i_tcon_top_get_connected_ep_id(dev->of_node, 3); >> > + if (id >= 0) { >> > + val |= FIELD_PREP(TCON_TOP_PORT_DE1_MSK, id); >> > + >> > + /* >> > + * mixer0 mux has priority over mixer1 mux. We have to >> > + * make sure mixer0 doesn't overtake TCON from mixer1. >> > + */ >> > + if (mixer0_unused && id == 0) >> > + val |= FIELD_PREP(TCON_TOP_PORT_DE0_MSK, 1); >> > + } else { >> > + DRM_DEBUG_DRIVER("TCON TOP mixer1 output is not >> > connected\n"); + } >> > + >> > + writel(val, regs + TCON_TOP_PORT_SEL_REG); >> > + >> > + /* >> > + * TCON TOP has two muxes, which select parent clock for each TCON >> > TV + * channel clock. Parent could be either TCON TV or TVE clock. >> > For now + * we leave this fixed to TCON TV, since TVE driver for >> > R40 is not yet + * implemented. Once it is, graph needs to be >> > traversed to determine + * if TVE is active on each TCON TV. If it >> > is, mux should be switched + * to TVE clock parent. >> > + */ >> > + clk_data->hws[CLK_TCON_TOP_TV0] = >> > + sun8i_tcon_top_register_gate(dev, tcon_tv0, regs, >> > + &tcon_top->reg_lock, >> > + TCON_TOP_TCON_TV0_GATE, 0); >> > + >> > + clk_data->hws[CLK_TCON_TOP_TV1] = >> > + sun8i_tcon_top_register_gate(dev, tcon_tv1, regs, >> > + &tcon_top->reg_lock, >> > + TCON_TOP_TCON_TV1_GATE, 1); >> > + >> > + clk_data->hws[CLK_TCON_TOP_DSI] = >> > + sun8i_tcon_top_register_gate(dev, dsi, regs, >> > + &tcon_top->reg_lock, >> > + TCON_TOP_TCON_DSI_GATE, 2); >> > + >> > + for (i = 0; i < CLK_NUM; i++) >> > + if (IS_ERR(clk_data->hws[i])) { >> > + ret = PTR_ERR(clk_data->hws[i]); >> > + goto err_unregister_gates; >> > + } >> > + >> > + clk_data->num = CLK_NUM; >> > + >> > + ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, >> > + clk_data); >> > + if (ret) >> > + goto err_unregister_gates; >> > + >> > + dev_set_drvdata(dev, tcon_top); >> > + >> > + return 0; >> > + >> > +err_unregister_gates: >> > + for (i = 0; i < CLK_NUM; i++) >> > + if (clk_data->hws[i]) >> > + clk_hw_unregister_gate(clk_data->hws[i]); >> > + clk_disable_unprepare(tcon_top->bus); >> > +err_assert_reset: >> > + reset_control_assert(tcon_top->rst); >> > + >> > + return ret; >> > +} >> > + >> > +static void sun8i_tcon_top_unbind(struct device *dev, struct device >> > *master, + void *data) >> > +{ >> > + struct sun8i_tcon_top *tcon_top = dev_get_drvdata(dev); >> > + struct clk_hw_onecell_data *clk_data = tcon_top->clk_data; >> > + int i; >> > + >> > + of_clk_del_provider(dev->of_node); >> > + for (i = 0; i < CLK_NUM; i++) >> > + clk_hw_unregister_gate(clk_data->hws[i]); >> > + >> > + clk_disable_unprepare(tcon_top->bus); >> > + reset_control_assert(tcon_top->rst); >> > +} >> > + >> > +static const struct component_ops sun8i_tcon_top_ops = { >> > + .bind = sun8i_tcon_top_bind, >> > + .unbind = sun8i_tcon_top_unbind, >> > +}; >> > + >> > +static int sun8i_tcon_top_probe(struct platform_device *pdev) >> > +{ >> > + return component_add(&pdev->dev, &sun8i_tcon_top_ops); >> > +} >> > + >> > +static int sun8i_tcon_top_remove(struct platform_device *pdev) >> > +{ >> > + component_del(&pdev->dev, &sun8i_tcon_top_ops); >> > + >> > + return 0; >> > +} >> > + >> > +/* sun4i_drv uses this list to check if a device node is a TCON TOP */ >> > +const struct of_device_id sun8i_tcon_top_of_table[] = { >> > + { .compatible = "allwinner,sun8i-r40-tcon-top" }, >> > + { /* sentinel */ } >> > +}; >> > +MODULE_DEVICE_TABLE(of, sun8i_tcon_top_of_table); >> > +EXPORT_SYMBOL(sun8i_tcon_top_of_table); >> > + >> > +static struct platform_driver sun8i_tcon_top_platform_driver = { >> > + .probe = sun8i_tcon_top_probe, >> > + .remove = sun8i_tcon_top_remove, >> > + .driver = { >> > + .name = "sun8i-tcon-top", >> > + .of_match_table = sun8i_tcon_top_of_table, >> > + }, >> > +}; >> > +module_platform_driver(sun8i_tcon_top_platform_driver); >> > + >> > +MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@siol.net>"); >> > +MODULE_DESCRIPTION("Allwinner R40 TCON TOP driver"); >> > +MODULE_LICENSE("GPL"); >> > diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.h >> > b/drivers/gpu/drm/sun4i/sun8i_tcon_top.h new file mode 100644 >> > index 000000000000..39838bbfeaee >> > --- /dev/null >> > +++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.h >> > @@ -0,0 +1,40 @@ >> > +/* SPDX-License-Identifier: GPL-2.0+ */ >> > +/* Copyright (c) 2018 Jernej Skrabec <jernej.skrabec@siol.net> */ >> > + >> > +#ifndef _SUN8I_TCON_TOP_H_ >> > +#define _SUN8I_TCON_TOP_H_ >> > + >> > +#include <linux/clk.h> >> > +#include <linux/clk-provider.h> >> > +#include <linux/reset.h> >> > +#include <linux/spinlock.h> >> > + >> > +#define TCON_TOP_TCON_TV_SETUP_REG 0x00 >> > + >> > +#define TCON_TOP_PORT_SEL_REG 0x1C >> > +#define TCON_TOP_PORT_DE0_MSK GENMASK(1, 0) >> > +#define TCON_TOP_PORT_DE1_MSK GENMASK(5, 4) >> > + >> > +#define TCON_TOP_GATE_SRC_REG 0x20 >> > +#define TCON_TOP_HDMI_SRC_MSK GENMASK(29, 28) >> > +#define TCON_TOP_TCON_TV1_GATE 24 >> > +#define TCON_TOP_TCON_TV0_GATE 20 >> > +#define TCON_TOP_TCON_DSI_GATE 16 >> > + >> > +#define CLK_NUM 3 >> > + >> > +struct sun8i_tcon_top { >> > + struct clk *bus; >> > + struct clk_hw_onecell_data *clk_data; >> > + struct reset_control *rst; >> > + >> > + /* >> > + * spinlock is used to synchronize access to same >> > + * register where multiple clock gates can be set. >> > + */ >> > + spinlock_t reg_lock; >> > +}; >> > + >> > +extern const struct of_device_id sun8i_tcon_top_of_table[]; >> > + >> > +#endif /* _SUN8I_TCON_TOP_H_ */ >> > -- >> > 2.18.0 > > > > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne četrtek, 28. junij 2018 ob 08:24:34 CEST je Chen-Yu Tsai napisal(a): > On Thu, Jun 28, 2018 at 12:45 PM, Jernej Škrabec > > <jernej.skrabec@siol.net> wrote: > > Dne četrtek, 28. junij 2018 ob 03:51:31 CEST je Chen-Yu Tsai napisal(a): > >> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> > > > > wrote: > >> > TV TCONs (channel 1 only) are always connected to TV or HDMI encoder. > >> > Because of that, all output endpoints on such TCON node will point to a > >> > encoder which is part of component framework. > >> > > >> > Correct current graph traversing algorithm in such way that it doesn't > >> > skip output enpoints with id 0 on TV TCONs. > >> > >> No. Our bindings say that endpoint 0 _is_ channel 0. For TCONs that don't > >> have channel 0, it must be skipped. > > > > I'm not sure where this is stated. I read TCON binding again. Can you > > please point me to it? > > https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bind > ings/display/sunxi/sun4i-drm.txt#L169 > > Our TCON driver still expects RGB or LVDS panel / bridges on endpoint 0. Yes, but that can only happen on TCON which has channel 0. TV TCONs (those with channel 1 only) can't have panels or bridges connected to them, because they are internally always connected to either HDMI or TV encoder or both. Actually, R40 is the only SoC, where same TV TCON can be connected to TV encoder or HDMI. Others have specialized TV TCONs, which are connect to only one encoder. IMO TV TCONs are really just stripped down LCD TCONs to support one (or max two) specific encoder. > So I guess this was sort of implied historically. It's no longer true. > This is something we should probably fix. Fixed in what way? You mean update bindings to mention that TCON output endpoint 0 is reserved for panels or bridges? > > In practice our drivers don't look at it (yet), but rely on the downstream > encoder type to determine which channel to use. > > But please add the "allwinner,tcon-channel" property as specified in > the binding. It's my understanding of TCON binding documentation that property "allwinner,tcon-channel" is needed only if TCON supports both channels. TV TCON clearly supports only channel 1. In that case, there is no doubt to which channel output endpoint belongs. If that's not true, dt bindings documentation should be reworded to contain word "needed" or something similar. Currently, no DT for newer SoC contains that property (for example, A83T, H3, H5 or even A33). On A33 this is even more interesting, since tcon0 has only channel 0 and has DSI output endpoint with number 1. According to TCON binding docs, if "allwinner,tcon-channel" is not preset, endpoint number represent channel. So, that would mean DSI needs channel 1 on tcon which supports clearly only channel 0. So either there TCON bindings documentation needs updates or DT for A33 has to be updated. BTW, "allwinner,tcon-channel" property is not used at all in the code. > > > So on TV TCONs on R40 (without channel 0) TVE would be endpoint 1 and HDMI > > endpoint 2 (or the other way around)? > > Which one goes first doesn't quite matter. IIRC there's also a mux for TVE? AFAIK, TV TCON is by default connected to TV encoder unless HDMI mux in TCON TOP points to it. I think it's best put TVE with lower number since it's default and HDMI with higher number. Best regards, Jernej -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne četrtek, 28. junij 2018 ob 08:51:07 CEST je Chen-Yu Tsai napisal(a): > On Thu, Jun 28, 2018 at 1:15 PM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > > Dne četrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai napisal(a): > >> On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec@siol.net> > > > > wrote: > >> > Add all entries needed for HDMI to function properly. > >> > > >> > Since R40 has highly configurable pipeline, both mixers and both TCON > >> > TVs are added. Board specific DT should then connect them together > >> > trough TCON TOP muxers to best fit the purpose of the board. > >> > > >> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > >> > --- > >> > > >> > arch/arm/boot/dts/sun8i-r40.dtsi | 269 +++++++++++++++++++++++++++++++ > >> > 1 file changed, 269 insertions(+) > >> > > >> > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi > >> > b/arch/arm/boot/dts/sun8i-r40.dtsi index 173dcc1652d2..a2a75fb04caf > >> > 100644 > >> > --- a/arch/arm/boot/dts/sun8i-r40.dtsi > >> > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi > >> > @@ -42,8 +42,11 @@ > >> > > >> > */ > >> > > >> > #include <dt-bindings/interrupt-controller/arm-gic.h> > >> > > >> > +#include <dt-bindings/clock/sun8i-de2.h> > >> > > >> > #include <dt-bindings/clock/sun8i-r40-ccu.h> > >> > > >> > +#include <dt-bindings/clock/sun8i-tcon-top.h> > > > > Maxime, above line breaks compilation for build robot, sorry. > > > >> > #include <dt-bindings/reset/sun8i-r40-ccu.h> > >> > > >> > +#include <dt-bindings/reset/sun8i-de2.h> > >> > > >> > / { > >> > > >> > #address-cells = <1>; > >> > > >> > @@ -99,12 +102,76 @@ > >> > > >> > }; > >> > > >> > }; > >> > > >> > + de: display-engine { > >> > + compatible = "allwinner,sun8i-r40-display-engine", > >> > + "allwinner,sun8i-h3-display-engine"; > >> > >> Given that the display pipeline looks different, they should not be > >> compatible. > > > > Ok. > > > >> > + allwinner,pipelines = <&mixer0>, <&mixer1>; > >> > + status = "disabled"; > >> > + }; > >> > + > >> > > >> > soc { > >> > > >> > compatible = "simple-bus"; > >> > #address-cells = <1>; > >> > #size-cells = <1>; > >> > ranges; > >> > > >> > + display_clocks: clock@1000000 { > >> > + compatible = "allwinner,sun8i-r40-de2-clk", > >> > + "allwinner,sun8i-h3-de2-clk"; > >> > + reg = <0x01000000 0x100000>; > >> > + clocks = <&ccu CLK_DE>, > >> > + <&ccu CLK_BUS_DE>; > >> > + clock-names = "mod", > >> > + "bus"; > >> > + resets = <&ccu RST_BUS_DE>; > >> > + #clock-cells = <1>; > >> > + #reset-cells = <1>; > >> > + }; > >> > + > >> > + mixer0: mixer@1100000 { > >> > + compatible = "allwinner,sun8i-r40-de2-mixer-0"; > >> > + reg = <0x01100000 0x100000>; > >> > + clocks = <&display_clocks CLK_BUS_MIXER0>, > >> > + <&display_clocks CLK_MIXER0>; > >> > + clock-names = "bus", > >> > + "mod"; > >> > + resets = <&display_clocks RST_MIXER0>; > >> > + > >> > + ports { > >> > + #address-cells = <1>; > >> > + #size-cells = <0>; > >> > + > >> > + mixer0_out: port@1 { > >> > + reg = <1>; > >> > + mixer0_out_tcon_top: endpoint { > >> > + remote-endpoint = > >> > <&tcon_top_mixer0_in_mixer0>; + > >> > }; > >> > + }; > >> > + }; > >> > + }; > >> > + > >> > + mixer1: mixer@1200000 { > >> > + compatible = "allwinner,sun8i-r40-de2-mixer-1"; > >> > + reg = <0x01200000 0x100000>; > >> > + clocks = <&display_clocks CLK_BUS_MIXER1>, > >> > + <&display_clocks CLK_MIXER1>; > >> > + clock-names = "bus", > >> > + "mod"; > >> > + resets = <&display_clocks RST_WB>; > >> > + > >> > + ports { > >> > + #address-cells = <1>; > >> > + #size-cells = <0>; > >> > + > >> > + mixer1_out: port@1 { > >> > + reg = <1>; > >> > + mixer1_out_tcon_top: endpoint { > >> > + remote-endpoint = > >> > <&tcon_top_mixer1_in_mixer1>; + > >> > }; > >> > + }; > >> > + }; > >> > + }; > >> > + > >> > > >> > nmi_intc: interrupt-controller@1c00030 { > >> > > >> > compatible = "allwinner,sun7i-a20-sc-nmi"; > >> > interrupt-controller; > >> > > >> > @@ -451,6 +518,163 @@ > >> > > >> > #size-cells = <0>; > >> > > >> > }; > >> > > >> > + tcon_top: tcon-top@1c70000 { > >> > + compatible = "allwinner,sun8i-r40-tcon-top"; > >> > + reg = <0x01c70000 0x1000>; > >> > + clocks = <&ccu CLK_BUS_TCON_TOP>, > >> > + <&ccu CLK_TCON_TV0>, > >> > + <&ccu CLK_TVE0>, > >> > + <&ccu CLK_TCON_TV1>, > >> > + <&ccu CLK_TVE1>, > >> > + <&ccu CLK_DSI_DPHY>; > >> > + clock-names = "bus", > >> > + "tcon-tv0", > >> > + "tve0", > >> > + "tcon-tv1", > >> > + "tve1", > >> > + "dsi"; > >> > + clock-output-names = "tcon-top-tv0", > >> > + "tcon-top-tv1", > >> > + "tcon-top-dsi"; > >> > + resets = <&ccu RST_BUS_TCON_TOP>; > >> > + #clock-cells = <1>; > >> > + > >> > + ports { > >> > + #address-cells = <1>; > >> > + #size-cells = <0>; > >> > + > >> > + tcon_top_mixer0_in: port@0 { > >> > + reg = <0>; > >> > + > >> > + tcon_top_mixer0_in_mixer0: > >> > endpoint { + > >> > remote-endpoint = <&mixer0_out_tcon_top>; + > >> > > >> > }; > >> > > >> > + }; > >> > + > >> > + tcon_top_mixer0_out: port@1 { > >> > + #address-cells = <1>; > >> > + #size-cells = <0>; > >> > + reg = <1>; > >> > + > >> > + tcon_top_mixer0_out_tcon_lcd0: > >> > endpoint@0 { + reg = <0>; > >> > + }; > >> > + > >> > + tcon_top_mixer0_out_tcon_lcd1: > >> > endpoint@1 { + reg = <1>; > >> > + }; > >> > + > >> > + tcon_top_mixer0_out_tcon_tv0: > >> > endpoint@2 { + reg = <2>; > >> > + }; > >> > + > >> > + tcon_top_mixer0_out_tcon_tv1: > >> > endpoint@3 { + reg = <3>; > >> > + }; > >> > + }; > >> > + > >> > + tcon_top_mixer1_in: port@2 { > >> > + reg = <2>; > >> > + > >> > + tcon_top_mixer1_in_mixer1: > >> > endpoint { + > >> > remote-endpoint = <&mixer1_out_tcon_top>; + > >> > > >> > }; > >> > > >> > + }; > >> > + > >> > + tcon_top_mixer1_out: port@3 { > >> > + #address-cells = <1>; > >> > + #size-cells = <0>; > >> > + reg = <3>; > >> > + > >> > + tcon_top_mixer1_out_tcon_lcd0: > >> > endpoint@0 { + reg = <0>; > >> > + }; > >> > + > >> > + tcon_top_mixer1_out_tcon_lcd1: > >> > endpoint@1 { + reg = <1>; > >> > + }; > >> > + > >> > + tcon_top_mixer1_out_tcon_tv0: > >> > endpoint@2 { + reg = <2>; > >> > + }; > >> > + > >> > + tcon_top_mixer1_out_tcon_tv1: > >> > endpoint@3 { + reg = <3>; > >> > + }; > >> > + }; > >> > + > >> > + tcon_top_hdmi_in: port@4 { > >> > + #address-cells = <1>; > >> > + #size-cells = <0>; > >> > + reg = <4>; > >> > + > >> > + tcon_top_hdmi_in_tcon_tv0: > >> > endpoint@0 { + reg = <0>; > >> > + }; > >> > + > >> > + tcon_top_hdmi_in_tcon_tv1: > >> > endpoint@1 { + reg = <1>; > >> > + }; > >> > + }; > >> > + > >> > + tcon_top_hdmi_out: port@5 { > >> > + reg = <5>; > >> > + > >> > + tcon_top_hdmi_out_hdmi: > >> > endpoint { > >> > + remote-endpoint = > >> > <&hdmi_in_tcon_top>; + }; > >> > + }; > >> > + }; > >> > + }; > >> > + > >> > + tcon_tv0: lcd-controller@1c73000 { > >> > + compatible = "allwinner,sun8i-r40-tcon-tv", > >> > + "allwinner,sun8i-a83t-tcon-tv"; > >> > + reg = <0x01c73000 0x1000>; > >> > + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; > >> > + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top > >> > 0>; > >> > + clock-names = "ahb", "tcon-ch1"; > >> > + resets = <&ccu RST_BUS_TCON_TV0>; > >> > + reset-names = "lcd"; > >> > + > >> > + ports { > >> > + #address-cells = <1>; > >> > + #size-cells = <0>; > >> > + > >> > + tcon_tv0_in: port@0 { > >> > + reg = <0>; > >> > + }; > >> > + > >> > + tcon_tv0_out: port@1 { > >> > + reg = <1>; > >> > + }; > >> > + }; > >> > + }; > >> > + > >> > + tcon_tv1: lcd-controller@1c74000 { > >> > + compatible = "allwinner,sun8i-r40-tcon-tv", > >> > + "allwinner,sun8i-a83t-tcon-tv"; > >> > + reg = <0x01c74000 0x1000>; > >> > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > >> > + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top > >> > 1>; > >> > + clock-names = "ahb", "tcon-ch1"; > >> > + resets = <&ccu RST_BUS_TCON_TV1>; > >> > + reset-names = "lcd"; > >> > + > >> > + ports { > >> > + #address-cells = <1>; > >> > + #size-cells = <0>; > >> > + > >> > + tcon_tv1_in: port@0 { > >> > + reg = <0>; > >> > + }; > >> > + > >> > + tcon_tv1_out: port@1 { > >> > + reg = <1>; > >> > >> You are missing the remote-endpoints for all the TCON-TOP <-> TCON > >> connections. Also, on the driver side, there's no code to handle > >> dynamically mapping mixers to the TCONs that are being used. In the past > >> we > >> had simple 1:1 mappings. This is no longer the case, and it needs to be > >> dealt with. > > > > How would TCON TOP driver know how to set muxes? There are no appropriate > > bingings for muxes, except for V4L2 subsystem, which doesn't really work > > here. > This will end up being a bunch of custom functions exported from the TCON > TOP driver to the TCON driver. As for bindings, the stuff you already have > is mostly enough. You do have to specify the endpoint ID vs component > mapping, so you can find the correct one. > > For example, you would specify that the IDs for TCON LCDs be 0 and 1, and > TCON TVs be 2 and 3. Matching the actual register values is a nice > convenience. These would be used by the driver as the TCON ID. So something that's already done (minus full connections). > > Also, we might want to consider them as two pairs of two TCONs (LCD + TV). > The CRTC in DRM land is actually the mixer + TCON on our platform. This > means we only have two CRTCs. So we could have CRTC 0 = mixer 0 + TCON LCD > 0 + TCON TV 0. The "TCON_TVx_OUTSEL" and "DE_PORTx PERH Select" muxes would > be set at run time in the mode set function, selecting either LCD or TV > based on what encoder is attached. That proposal would still limit some combinations. For example, that would put DSI always on mixer1, since it can be connected to only LCD TCON 1. It can also cause undesired combination in laptop solutions. Consider that PCB designer connected LCD1 pins to panel for some reason. Panel is definetly main screen and should definetly be connected to mixer0, but in that case, it would be to mixer1. Additionaly, since HDMI would became floating between TV TCON 0 and 1, whoever would write board DT would need to know this and enable only TV TCON1 if LCD is desired to be connected to mixer0 (or vice versa). If we really want universal solution with full connections, addtional property has to be defined and used for that. > > This limitation is a software one, and should not bleed over into the > hardware representation. > > > Additionaly, how would HDMI know which TCON belongs to it to appropriately > > set possible_crtcs? > > HDMI is connected to the two TCON TVs through the TCON TOP mux. We handle > TCON output muxing in the TCON driver, using the set_mux callback in the > quirks. For R40, this callback would probably call into the TCON TOP driver > asking it to set the mux to some value. > > > Currently, my idea is that board DT creates wanted connections. Since > > there is only one valid connection for each mux, driver knows eactly what > > to write into mux register. HDMI driver can simply check which TCON > > connection is valid in HDMI input mux and select it in possible_crtcs. > > But that is not how the actual hardware looks like. The device tree should > model the hardware, not a subset of it just because one thinks the > implementation is difficult or won't be used at all. > > Furthermore, I think you have it backwards. possible_crtcs is generated > based on (in our case) the connections between TCON and HDMI based on the > device tree graph. So if you have both hooked up, both will show up in > possible_crtcs, but only one crtc will actually be selected to feed the > HDMI encoder. If you really need to access the current crtc, the > drm_encoder struct contains a pointer to it. > > In DE 1.0 driver, we leave all the muxing to the TCON driver. See > > > https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/sun4i/sun4i_ > tcon.c#L537 > > So in a sense, the HDMI encoder should be and is hooked up to both TCONs, > but only one is active at any given time. So something like that I had in v1 series. I'll implement something similar. That would also mean we need R40 specific TV TCON compatible. I'll restore that. Just a question on future situation when TVE driver will be implemented. Suppose that R40 board has TVE0 and HDMI as outputs. This would mean that TVE0 has possible crtcs set as 0b01 and HDMI 0b11. Will be DRM framework smart enough that it will put HDMI on second crtc because TVE0 can be connected to only to first crtc? > > > Please also note that mixer0 and mixer1 don't have same capabilities and > > you generally want mixer0 to be connected to main output. This is in > > contrast to DE1 SoCs, where both backends and both frontends have same > > capability. > Yes. But who's to say the two display outputs can't be reversed or swapped > around? With fixed singular connections, you also rule out mirrored output. I don't think there is standard way to swap around mixers at runtime, expecially if crtcs are represented as mixer + TCON pair. I'm not sure what do you mean with mirrored output or at least why singular connections would prevent mirroring. HW mirroring needs DRM writeback support which is currently in RFC phase if I'm not mistaken. Once implemented in DRM framework and in sun4i-drm, it would be possible only to mirror mixer0 -> mixer1, because mixer1 doesn't support writeback (at least on existing SoCs). Best regards, Jernej > > ChenYu > > >> ChenYu > >> > >> > + }; > >> > + }; > >> > + }; > >> > + > >> > > >> > gic: interrupt-controller@1c81000 { > >> > > >> > compatible = "arm,gic-400"; > >> > reg = <0x01c81000 0x1000>, > >> > > >> > @@ -461,6 +685,51 @@ > >> > > >> > #interrupt-cells = <3>; > >> > interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) > >> > | > >> > IRQ_TYPE_LEVEL_HIGH)>; > >> > > >> > }; > >> > > >> > + > >> > + hdmi: hdmi@1ee0000 { > >> > + compatible = "allwinner,sun8i-r40-dw-hdmi", > >> > + "allwinner,sun8i-a83t-dw-hdmi"; > >> > + reg = <0x01ee0000 0x10000>; > >> > + reg-io-width = <1>; > >> > + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; > >> > + clocks = <&ccu CLK_BUS_HDMI0>, <&ccu > >> > CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; > >> > + clock-names = "iahb", "isfr", "tmds"; > >> > + resets = <&ccu RST_BUS_HDMI1>; > >> > + reset-names = "ctrl"; > >> > + phys = <&hdmi_phy>; > >> > + phy-names = "hdmi-phy"; > >> > + status = "disabled"; > >> > + > >> > + ports { > >> > + #address-cells = <1>; > >> > + #size-cells = <0>; > >> > + > >> > + hdmi_in: port@0 { > >> > + reg = <0>; > >> > + > >> > + hdmi_in_tcon_top: endpoint { > >> > + remote-endpoint = > >> > <&tcon_top_hdmi_out_hdmi>; + }; > >> > + }; > >> > + > >> > + hdmi_out: port@1 { > >> > + reg = <1>; > >> > + }; > >> > + }; > >> > + }; > >> > + > >> > + hdmi_phy: hdmi-phy@1ef0000 { > >> > + compatible = "allwinner,sun8i-r40-hdmi-phy", > >> > + "allwinner,sun50i-a64-hdmi-phy"; > >> > + reg = <0x01ef0000 0x10000>; > >> > + clocks = <&ccu CLK_BUS_HDMI1>, <&ccu > >> > CLK_HDMI_SLOW>, + <&ccu 7>, <&ccu 16>; > >> > + clock-names = "bus", "mod", "pll-0", "pll-1"; > >> > + resets = <&ccu RST_BUS_HDMI0>; > >> > + reset-names = "phy"; > >> > + #phy-cells = <0>; > >> > + }; > >> > > >> > }; > >> > > >> > timer { > >> > > >> > -- > >> > 2.18.0 > > > > -- > > You received this message because you are subscribed to the Google Groups > > "linux-sunxi" group. To unsubscribe from this group and stop receiving > > emails from it, send an email to > > linux-sunxi+unsubscribe@googlegroups.com. For more options, visit > > https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Jul 1, 2018 at 6:41 PM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > Dne četrtek, 28. junij 2018 ob 08:51:07 CEST je Chen-Yu Tsai napisal(a): >> On Thu, Jun 28, 2018 at 1:15 PM, Jernej Škrabec <jernej.skrabec@siol.net> > wrote: >> > Dne četrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai napisal(a): >> >> On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec@siol.net> >> > >> > wrote: >> >> > Add all entries needed for HDMI to function properly. >> >> > >> >> > Since R40 has highly configurable pipeline, both mixers and both TCON >> >> > TVs are added. Board specific DT should then connect them together >> >> > trough TCON TOP muxers to best fit the purpose of the board. >> >> > >> >> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> >> >> > --- >> >> > >> >> > arch/arm/boot/dts/sun8i-r40.dtsi | 269 +++++++++++++++++++++++++++++++ >> >> > 1 file changed, 269 insertions(+) >> >> > >> >> > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi >> >> > b/arch/arm/boot/dts/sun8i-r40.dtsi index 173dcc1652d2..a2a75fb04caf >> >> > 100644 >> >> > --- a/arch/arm/boot/dts/sun8i-r40.dtsi >> >> > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi >> >> > @@ -42,8 +42,11 @@ >> >> > >> >> > */ >> >> > >> >> > #include <dt-bindings/interrupt-controller/arm-gic.h> >> >> > >> >> > +#include <dt-bindings/clock/sun8i-de2.h> >> >> > >> >> > #include <dt-bindings/clock/sun8i-r40-ccu.h> >> >> > >> >> > +#include <dt-bindings/clock/sun8i-tcon-top.h> >> > >> > Maxime, above line breaks compilation for build robot, sorry. >> > >> >> > #include <dt-bindings/reset/sun8i-r40-ccu.h> >> >> > >> >> > +#include <dt-bindings/reset/sun8i-de2.h> >> >> > >> >> > / { >> >> > >> >> > #address-cells = <1>; >> >> > >> >> > @@ -99,12 +102,76 @@ >> >> > >> >> > }; >> >> > >> >> > }; >> >> > >> >> > + de: display-engine { >> >> > + compatible = "allwinner,sun8i-r40-display-engine", >> >> > + "allwinner,sun8i-h3-display-engine"; >> >> >> >> Given that the display pipeline looks different, they should not be >> >> compatible. >> > >> > Ok. >> > >> >> > + allwinner,pipelines = <&mixer0>, <&mixer1>; >> >> > + status = "disabled"; >> >> > + }; >> >> > + >> >> > >> >> > soc { >> >> > >> >> > compatible = "simple-bus"; >> >> > #address-cells = <1>; >> >> > #size-cells = <1>; >> >> > ranges; >> >> > >> >> > + display_clocks: clock@1000000 { >> >> > + compatible = "allwinner,sun8i-r40-de2-clk", >> >> > + "allwinner,sun8i-h3-de2-clk"; >> >> > + reg = <0x01000000 0x100000>; >> >> > + clocks = <&ccu CLK_DE>, >> >> > + <&ccu CLK_BUS_DE>; >> >> > + clock-names = "mod", >> >> > + "bus"; >> >> > + resets = <&ccu RST_BUS_DE>; >> >> > + #clock-cells = <1>; >> >> > + #reset-cells = <1>; >> >> > + }; >> >> > + >> >> > + mixer0: mixer@1100000 { >> >> > + compatible = "allwinner,sun8i-r40-de2-mixer-0"; >> >> > + reg = <0x01100000 0x100000>; >> >> > + clocks = <&display_clocks CLK_BUS_MIXER0>, >> >> > + <&display_clocks CLK_MIXER0>; >> >> > + clock-names = "bus", >> >> > + "mod"; >> >> > + resets = <&display_clocks RST_MIXER0>; >> >> > + >> >> > + ports { >> >> > + #address-cells = <1>; >> >> > + #size-cells = <0>; >> >> > + >> >> > + mixer0_out: port@1 { >> >> > + reg = <1>; >> >> > + mixer0_out_tcon_top: endpoint { >> >> > + remote-endpoint = >> >> > <&tcon_top_mixer0_in_mixer0>; + >> >> > }; >> >> > + }; >> >> > + }; >> >> > + }; >> >> > + >> >> > + mixer1: mixer@1200000 { >> >> > + compatible = "allwinner,sun8i-r40-de2-mixer-1"; >> >> > + reg = <0x01200000 0x100000>; >> >> > + clocks = <&display_clocks CLK_BUS_MIXER1>, >> >> > + <&display_clocks CLK_MIXER1>; >> >> > + clock-names = "bus", >> >> > + "mod"; >> >> > + resets = <&display_clocks RST_WB>; >> >> > + >> >> > + ports { >> >> > + #address-cells = <1>; >> >> > + #size-cells = <0>; >> >> > + >> >> > + mixer1_out: port@1 { >> >> > + reg = <1>; >> >> > + mixer1_out_tcon_top: endpoint { >> >> > + remote-endpoint = >> >> > <&tcon_top_mixer1_in_mixer1>; + >> >> > }; >> >> > + }; >> >> > + }; >> >> > + }; >> >> > + >> >> > >> >> > nmi_intc: interrupt-controller@1c00030 { >> >> > >> >> > compatible = "allwinner,sun7i-a20-sc-nmi"; >> >> > interrupt-controller; >> >> > >> >> > @@ -451,6 +518,163 @@ >> >> > >> >> > #size-cells = <0>; >> >> > >> >> > }; >> >> > >> >> > + tcon_top: tcon-top@1c70000 { >> >> > + compatible = "allwinner,sun8i-r40-tcon-top"; >> >> > + reg = <0x01c70000 0x1000>; >> >> > + clocks = <&ccu CLK_BUS_TCON_TOP>, >> >> > + <&ccu CLK_TCON_TV0>, >> >> > + <&ccu CLK_TVE0>, >> >> > + <&ccu CLK_TCON_TV1>, >> >> > + <&ccu CLK_TVE1>, >> >> > + <&ccu CLK_DSI_DPHY>; >> >> > + clock-names = "bus", >> >> > + "tcon-tv0", >> >> > + "tve0", >> >> > + "tcon-tv1", >> >> > + "tve1", >> >> > + "dsi"; >> >> > + clock-output-names = "tcon-top-tv0", >> >> > + "tcon-top-tv1", >> >> > + "tcon-top-dsi"; >> >> > + resets = <&ccu RST_BUS_TCON_TOP>; >> >> > + #clock-cells = <1>; >> >> > + >> >> > + ports { >> >> > + #address-cells = <1>; >> >> > + #size-cells = <0>; >> >> > + >> >> > + tcon_top_mixer0_in: port@0 { >> >> > + reg = <0>; >> >> > + >> >> > + tcon_top_mixer0_in_mixer0: >> >> > endpoint { + >> >> > remote-endpoint = <&mixer0_out_tcon_top>; + >> >> > >> >> > }; >> >> > >> >> > + }; >> >> > + >> >> > + tcon_top_mixer0_out: port@1 { >> >> > + #address-cells = <1>; >> >> > + #size-cells = <0>; >> >> > + reg = <1>; >> >> > + >> >> > + tcon_top_mixer0_out_tcon_lcd0: >> >> > endpoint@0 { + reg = <0>; >> >> > + }; >> >> > + >> >> > + tcon_top_mixer0_out_tcon_lcd1: >> >> > endpoint@1 { + reg = <1>; >> >> > + }; >> >> > + >> >> > + tcon_top_mixer0_out_tcon_tv0: >> >> > endpoint@2 { + reg = <2>; >> >> > + }; >> >> > + >> >> > + tcon_top_mixer0_out_tcon_tv1: >> >> > endpoint@3 { + reg = <3>; >> >> > + }; >> >> > + }; >> >> > + >> >> > + tcon_top_mixer1_in: port@2 { >> >> > + reg = <2>; >> >> > + >> >> > + tcon_top_mixer1_in_mixer1: >> >> > endpoint { + >> >> > remote-endpoint = <&mixer1_out_tcon_top>; + >> >> > >> >> > }; >> >> > >> >> > + }; >> >> > + >> >> > + tcon_top_mixer1_out: port@3 { >> >> > + #address-cells = <1>; >> >> > + #size-cells = <0>; >> >> > + reg = <3>; >> >> > + >> >> > + tcon_top_mixer1_out_tcon_lcd0: >> >> > endpoint@0 { + reg = <0>; >> >> > + }; >> >> > + >> >> > + tcon_top_mixer1_out_tcon_lcd1: >> >> > endpoint@1 { + reg = <1>; >> >> > + }; >> >> > + >> >> > + tcon_top_mixer1_out_tcon_tv0: >> >> > endpoint@2 { + reg = <2>; >> >> > + }; >> >> > + >> >> > + tcon_top_mixer1_out_tcon_tv1: >> >> > endpoint@3 { + reg = <3>; >> >> > + }; >> >> > + }; >> >> > + >> >> > + tcon_top_hdmi_in: port@4 { >> >> > + #address-cells = <1>; >> >> > + #size-cells = <0>; >> >> > + reg = <4>; >> >> > + >> >> > + tcon_top_hdmi_in_tcon_tv0: >> >> > endpoint@0 { + reg = <0>; >> >> > + }; >> >> > + >> >> > + tcon_top_hdmi_in_tcon_tv1: >> >> > endpoint@1 { + reg = <1>; >> >> > + }; >> >> > + }; >> >> > + >> >> > + tcon_top_hdmi_out: port@5 { >> >> > + reg = <5>; >> >> > + >> >> > + tcon_top_hdmi_out_hdmi: >> >> > endpoint { >> >> > + remote-endpoint = >> >> > <&hdmi_in_tcon_top>; + }; >> >> > + }; >> >> > + }; >> >> > + }; >> >> > + >> >> > + tcon_tv0: lcd-controller@1c73000 { >> >> > + compatible = "allwinner,sun8i-r40-tcon-tv", >> >> > + "allwinner,sun8i-a83t-tcon-tv"; >> >> > + reg = <0x01c73000 0x1000>; >> >> > + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; >> >> > + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top >> >> > 0>; >> >> > + clock-names = "ahb", "tcon-ch1"; >> >> > + resets = <&ccu RST_BUS_TCON_TV0>; >> >> > + reset-names = "lcd"; >> >> > + >> >> > + ports { >> >> > + #address-cells = <1>; >> >> > + #size-cells = <0>; >> >> > + >> >> > + tcon_tv0_in: port@0 { >> >> > + reg = <0>; >> >> > + }; >> >> > + >> >> > + tcon_tv0_out: port@1 { >> >> > + reg = <1>; >> >> > + }; >> >> > + }; >> >> > + }; >> >> > + >> >> > + tcon_tv1: lcd-controller@1c74000 { >> >> > + compatible = "allwinner,sun8i-r40-tcon-tv", >> >> > + "allwinner,sun8i-a83t-tcon-tv"; >> >> > + reg = <0x01c74000 0x1000>; >> >> > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; >> >> > + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top >> >> > 1>; >> >> > + clock-names = "ahb", "tcon-ch1"; >> >> > + resets = <&ccu RST_BUS_TCON_TV1>; >> >> > + reset-names = "lcd"; >> >> > + >> >> > + ports { >> >> > + #address-cells = <1>; >> >> > + #size-cells = <0>; >> >> > + >> >> > + tcon_tv1_in: port@0 { >> >> > + reg = <0>; >> >> > + }; >> >> > + >> >> > + tcon_tv1_out: port@1 { >> >> > + reg = <1>; >> >> >> >> You are missing the remote-endpoints for all the TCON-TOP <-> TCON >> >> connections. Also, on the driver side, there's no code to handle >> >> dynamically mapping mixers to the TCONs that are being used. In the past >> >> we >> >> had simple 1:1 mappings. This is no longer the case, and it needs to be >> >> dealt with. >> > >> > How would TCON TOP driver know how to set muxes? There are no appropriate >> > bingings for muxes, except for V4L2 subsystem, which doesn't really work >> > here. >> This will end up being a bunch of custom functions exported from the TCON >> TOP driver to the TCON driver. As for bindings, the stuff you already have >> is mostly enough. You do have to specify the endpoint ID vs component >> mapping, so you can find the correct one. >> >> For example, you would specify that the IDs for TCON LCDs be 0 and 1, and >> TCON TVs be 2 and 3. Matching the actual register values is a nice >> convenience. These would be used by the driver as the TCON ID. > > So something that's already done (minus full connections). > >> >> Also, we might want to consider them as two pairs of two TCONs (LCD + TV). >> The CRTC in DRM land is actually the mixer + TCON on our platform. This >> means we only have two CRTCs. So we could have CRTC 0 = mixer 0 + TCON LCD >> 0 + TCON TV 0. The "TCON_TVx_OUTSEL" and "DE_PORTx PERH Select" muxes would >> be set at run time in the mode set function, selecting either LCD or TV >> based on what encoder is attached. > > That proposal would still limit some combinations. For example, that would put > DSI always on mixer1, since it can be connected to only LCD TCON 1. It can > also cause undesired combination in laptop solutions. Consider that PCB > designer connected LCD1 pins to panel for some reason. Panel is definetly main > screen and should definetly be connected to mixer0, but in that case, it would > be to mixer1. There's no reason we can't have dynamically assigned mixer+tcon pairs, but that would mean implementing additional scheduling code that we don't have yet. The current sunxi-drm and CRTC code assume static mappings. We could do this as a second step if you're up to it. > Additionaly, since HDMI would became floating between TV TCON 0 and 1, whoever > would write board DT would need to know this and enable only TV TCON1 if LCD > is desired to be connected to mixer0 (or vice versa). There's no reason not to have all TCONs enabled by default. We would consider the display-engine node controlling whether everything actually gets used. > If we really want universal solution with full connections, addtional property > has to be defined and used for that. > >> >> This limitation is a software one, and should not bleed over into the >> hardware representation. >> >> > Additionaly, how would HDMI know which TCON belongs to it to appropriately >> > set possible_crtcs? >> >> HDMI is connected to the two TCON TVs through the TCON TOP mux. We handle >> TCON output muxing in the TCON driver, using the set_mux callback in the >> quirks. For R40, this callback would probably call into the TCON TOP driver >> asking it to set the mux to some value. >> >> > Currently, my idea is that board DT creates wanted connections. Since >> > there is only one valid connection for each mux, driver knows eactly what >> > to write into mux register. HDMI driver can simply check which TCON >> > connection is valid in HDMI input mux and select it in possible_crtcs. >> >> But that is not how the actual hardware looks like. The device tree should >> model the hardware, not a subset of it just because one thinks the >> implementation is difficult or won't be used at all. >> >> Furthermore, I think you have it backwards. possible_crtcs is generated >> based on (in our case) the connections between TCON and HDMI based on the >> device tree graph. So if you have both hooked up, both will show up in >> possible_crtcs, but only one crtc will actually be selected to feed the >> HDMI encoder. If you really need to access the current crtc, the >> drm_encoder struct contains a pointer to it. >> >> In DE 1.0 driver, we leave all the muxing to the TCON driver. See >> >> >> https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/sun4i/sun4i_ >> tcon.c#L537 >> >> So in a sense, the HDMI encoder should be and is hooked up to both TCONs, >> but only one is active at any given time. > > So something like that I had in v1 series. I'll implement something similar. > That would also mean we need R40 specific TV TCON compatible. I'll restore > that. > > Just a question on future situation when TVE driver will be implemented. > Suppose that R40 board has TVE0 and HDMI as outputs. This would mean that TVE0 > has possible crtcs set as 0b01 and HDMI 0b11. Will be DRM framework smart > enough that it will put HDMI on second crtc because TVE0 can be connected to > only to first crtc? Yes. If the possible_clones setting for the encoder is not set, the DRM framework will not do mirroring, and will keep each active encoder on a separate crtc. > >> >> > Please also note that mixer0 and mixer1 don't have same capabilities and >> > you generally want mixer0 to be connected to main output. This is in >> > contrast to DE1 SoCs, where both backends and both frontends have same >> > capability. >> Yes. But who's to say the two display outputs can't be reversed or swapped >> around? With fixed singular connections, you also rule out mirrored output. > > I don't think there is standard way to swap around mixers at runtime, > expecially if crtcs are represented as mixer + TCON pair. As I mentioned above, we will have to do this on our own. > I'm not sure what do you mean with mirrored output or at least why singular > connections would prevent mirroring. HW mirroring needs DRM writeback support > which is currently in RFC phase if I'm not mistaken. Once implemented in DRM > framework and in sun4i-drm, it would be possible only to mirror mixer0 -> > mixer1, because mixer1 doesn't support writeback (at least on existing SoCs). What I meant was it might be possible to drive two TCONs with one mixer, or two encoders with one TCON. I guess the latter is not possible since each TCON only has one channel. Not sure about the former. Regards ChenYu > Best regards, > Jernej > >> >> ChenYu >> >> >> ChenYu >> >> >> >> > + }; >> >> > + }; >> >> > + }; >> >> > + >> >> > >> >> > gic: interrupt-controller@1c81000 { >> >> > >> >> > compatible = "arm,gic-400"; >> >> > reg = <0x01c81000 0x1000>, >> >> > >> >> > @@ -461,6 +685,51 @@ >> >> > >> >> > #interrupt-cells = <3>; >> >> > interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) >> >> > | >> >> > IRQ_TYPE_LEVEL_HIGH)>; >> >> > >> >> > }; >> >> > >> >> > + >> >> > + hdmi: hdmi@1ee0000 { >> >> > + compatible = "allwinner,sun8i-r40-dw-hdmi", >> >> > + "allwinner,sun8i-a83t-dw-hdmi"; >> >> > + reg = <0x01ee0000 0x10000>; >> >> > + reg-io-width = <1>; >> >> > + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; >> >> > + clocks = <&ccu CLK_BUS_HDMI0>, <&ccu >> >> > CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; >> >> > + clock-names = "iahb", "isfr", "tmds"; >> >> > + resets = <&ccu RST_BUS_HDMI1>; >> >> > + reset-names = "ctrl"; >> >> > + phys = <&hdmi_phy>; >> >> > + phy-names = "hdmi-phy"; >> >> > + status = "disabled"; >> >> > + >> >> > + ports { >> >> > + #address-cells = <1>; >> >> > + #size-cells = <0>; >> >> > + >> >> > + hdmi_in: port@0 { >> >> > + reg = <0>; >> >> > + >> >> > + hdmi_in_tcon_top: endpoint { >> >> > + remote-endpoint = >> >> > <&tcon_top_hdmi_out_hdmi>; + }; >> >> > + }; >> >> > + >> >> > + hdmi_out: port@1 { >> >> > + reg = <1>; >> >> > + }; >> >> > + }; >> >> > + }; >> >> > + >> >> > + hdmi_phy: hdmi-phy@1ef0000 { >> >> > + compatible = "allwinner,sun8i-r40-hdmi-phy", >> >> > + "allwinner,sun50i-a64-hdmi-phy"; >> >> > + reg = <0x01ef0000 0x10000>; >> >> > + clocks = <&ccu CLK_BUS_HDMI1>, <&ccu >> >> > CLK_HDMI_SLOW>, + <&ccu 7>, <&ccu 16>; >> >> > + clock-names = "bus", "mod", "pll-0", "pll-1"; >> >> > + resets = <&ccu RST_BUS_HDMI0>; >> >> > + reset-names = "phy"; >> >> > + #phy-cells = <0>; >> >> > + }; >> >> > >> >> > }; >> >> > >> >> > timer { >> >> > >> >> > -- >> >> > 2.18.0 >> > >> > -- >> > You received this message because you are subscribed to the Google Groups >> > "linux-sunxi" group. To unsubscribe from this group and stop receiving >> > emails from it, send an email to >> > linux-sunxi+unsubscribe@googlegroups.com. For more options, visit >> > https://groups.google.com/d/optout. > > > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Jul 1, 2018 at 4:27 PM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > Dne četrtek, 28. junij 2018 ob 08:24:34 CEST je Chen-Yu Tsai napisal(a): >> On Thu, Jun 28, 2018 at 12:45 PM, Jernej Škrabec >> >> <jernej.skrabec@siol.net> wrote: >> > Dne četrtek, 28. junij 2018 ob 03:51:31 CEST je Chen-Yu Tsai napisal(a): >> >> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> >> > >> > wrote: >> >> > TV TCONs (channel 1 only) are always connected to TV or HDMI encoder. >> >> > Because of that, all output endpoints on such TCON node will point to a >> >> > encoder which is part of component framework. >> >> > >> >> > Correct current graph traversing algorithm in such way that it doesn't >> >> > skip output enpoints with id 0 on TV TCONs. >> >> >> >> No. Our bindings say that endpoint 0 _is_ channel 0. For TCONs that don't >> >> have channel 0, it must be skipped. >> > >> > I'm not sure where this is stated. I read TCON binding again. Can you >> > please point me to it? >> >> https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bind >> ings/display/sunxi/sun4i-drm.txt#L169 >> >> Our TCON driver still expects RGB or LVDS panel / bridges on endpoint 0. > > Yes, but that can only happen on TCON which has channel 0. TV TCONs (those > with channel 1 only) can't have panels or bridges connected to them, because > they are internally always connected to either HDMI or TV encoder or both. > Actually, R40 is the only SoC, where same TV TCON can be connected to TV > encoder or HDMI. Others have specialized TV TCONs, which are connect to only > one encoder. > > IMO TV TCONs are really just stripped down LCD TCONs to support one (or max > two) specific encoder. I agree. We've seen these first in the H3, and the reverse, TCONs only with LCD, on the A23/A33. >> So I guess this was sort of implied historically. It's no longer true. >> This is something we should probably fix. > > Fixed in what way? You mean update bindings to mention that TCON output > endpoint 0 is reserved for panels or bridges? Either that, or have the drm driver look at other endpoints. I guess we should ask Maxime if this is already done or not, since the DSI driver isn't endpoint 0 in the A33 dtsi. >> >> In practice our drivers don't look at it (yet), but rely on the downstream >> encoder type to determine which channel to use. >> >> But please add the "allwinner,tcon-channel" property as specified in >> the binding. > > It's my understanding of TCON binding documentation that property > "allwinner,tcon-channel" is needed only if TCON supports both channels. TV > TCON clearly supports only channel 1. In that case, there is no doubt to which > channel output endpoint belongs. > > If that's not true, dt bindings documentation should be reworded to contain > word "needed" or something similar. Currently, no DT for newer SoC contains > that property (for example, A83T, H3, H5 or even A33). On A33 this is even > more interesting, since tcon0 has only channel 0 and has DSI output endpoint > with number 1. According to TCON binding docs, if "allwinner,tcon-channel" is > not preset, endpoint number represent channel. So, that would mean DSI needs > channel 1 on tcon which supports clearly only channel 0. So either there TCON > bindings documentation needs updates or DT for A33 has to be updated. Maxime? You did the A33 DSI stuff. > BTW, "allwinner,tcon-channel" property is not used at all in the code. Yes I'm aware. We just base the channel selection on the encoder type instead. TV-like ones use channel 1, LCD ones use channel 0. >> >> > So on TV TCONs on R40 (without channel 0) TVE would be endpoint 1 and HDMI >> > endpoint 2 (or the other way around)? >> >> Which one goes first doesn't quite matter. IIRC there's also a mux for TVE? > > AFAIK, TV TCON is by default connected to TV encoder unless HDMI mux in TCON > TOP points to it. I think it's best put TVE with lower number since it's > default and HDMI with higher number. Ok. As long as its specified in the binding, as a contract between the dts and the graph parsing code. Regards ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne nedelja, 01. julij 2018 ob 15:52:55 CEST je Chen-Yu Tsai napisal(a): > On Sun, Jul 1, 2018 at 6:41 PM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > > Dne četrtek, 28. junij 2018 ob 08:51:07 CEST je Chen-Yu Tsai napisal(a): > >> On Thu, Jun 28, 2018 at 1:15 PM, Jernej Škrabec <jernej.skrabec@siol.net> > > > > wrote: > >> > Dne četrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai napisal(a): > >> >> On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec > >> >> <jernej.skrabec@siol.net> > >> > > >> > wrote: > >> >> > Add all entries needed for HDMI to function properly. > >> >> > > >> >> > Since R40 has highly configurable pipeline, both mixers and both > >> >> > TCON > >> >> > TVs are added. Board specific DT should then connect them together > >> >> > trough TCON TOP muxers to best fit the purpose of the board. > >> >> > > >> >> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > >> >> > --- > >> >> > > >> >> > arch/arm/boot/dts/sun8i-r40.dtsi | 269 > >> >> > +++++++++++++++++++++++++++++++ > >> >> > 1 file changed, 269 insertions(+) > >> >> > > >> >> > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi > >> >> > b/arch/arm/boot/dts/sun8i-r40.dtsi index 173dcc1652d2..a2a75fb04caf > >> >> > 100644 > >> >> > --- a/arch/arm/boot/dts/sun8i-r40.dtsi > >> >> > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi > >> >> > @@ -42,8 +42,11 @@ > >> >> > > >> >> > */ > >> >> > > >> >> > #include <dt-bindings/interrupt-controller/arm-gic.h> > >> >> > > >> >> > +#include <dt-bindings/clock/sun8i-de2.h> > >> >> > > >> >> > #include <dt-bindings/clock/sun8i-r40-ccu.h> > >> >> > > >> >> > +#include <dt-bindings/clock/sun8i-tcon-top.h> > >> > > >> > Maxime, above line breaks compilation for build robot, sorry. > >> > > >> >> > #include <dt-bindings/reset/sun8i-r40-ccu.h> > >> >> > > >> >> > +#include <dt-bindings/reset/sun8i-de2.h> > >> >> > > >> >> > / { > >> >> > > >> >> > #address-cells = <1>; > >> >> > > >> >> > @@ -99,12 +102,76 @@ > >> >> > > >> >> > }; > >> >> > > >> >> > }; > >> >> > > >> >> > + de: display-engine { > >> >> > + compatible = "allwinner,sun8i-r40-display-engine", > >> >> > + "allwinner,sun8i-h3-display-engine"; > >> >> > >> >> Given that the display pipeline looks different, they should not be > >> >> compatible. > >> > > >> > Ok. > >> > > >> >> > + allwinner,pipelines = <&mixer0>, <&mixer1>; > >> >> > + status = "disabled"; > >> >> > + }; > >> >> > + > >> >> > > >> >> > soc { > >> >> > > >> >> > compatible = "simple-bus"; > >> >> > #address-cells = <1>; > >> >> > #size-cells = <1>; > >> >> > ranges; > >> >> > > >> >> > + display_clocks: clock@1000000 { > >> >> > + compatible = "allwinner,sun8i-r40-de2-clk", > >> >> > + "allwinner,sun8i-h3-de2-clk"; > >> >> > + reg = <0x01000000 0x100000>; > >> >> > + clocks = <&ccu CLK_DE>, > >> >> > + <&ccu CLK_BUS_DE>; > >> >> > + clock-names = "mod", > >> >> > + "bus"; > >> >> > + resets = <&ccu RST_BUS_DE>; > >> >> > + #clock-cells = <1>; > >> >> > + #reset-cells = <1>; > >> >> > + }; > >> >> > + > >> >> > + mixer0: mixer@1100000 { > >> >> > + compatible = > >> >> > "allwinner,sun8i-r40-de2-mixer-0"; > >> >> > + reg = <0x01100000 0x100000>; > >> >> > + clocks = <&display_clocks CLK_BUS_MIXER0>, > >> >> > + <&display_clocks CLK_MIXER0>; > >> >> > + clock-names = "bus", > >> >> > + "mod"; > >> >> > + resets = <&display_clocks RST_MIXER0>; > >> >> > + > >> >> > + ports { > >> >> > + #address-cells = <1>; > >> >> > + #size-cells = <0>; > >> >> > + > >> >> > + mixer0_out: port@1 { > >> >> > + reg = <1>; > >> >> > + mixer0_out_tcon_top: > >> >> > endpoint { > >> >> > + remote-endpoint = > >> >> > <&tcon_top_mixer0_in_mixer0>; + > >> >> > }; > >> >> > + }; > >> >> > + }; > >> >> > + }; > >> >> > + > >> >> > + mixer1: mixer@1200000 { > >> >> > + compatible = > >> >> > "allwinner,sun8i-r40-de2-mixer-1"; > >> >> > + reg = <0x01200000 0x100000>; > >> >> > + clocks = <&display_clocks CLK_BUS_MIXER1>, > >> >> > + <&display_clocks CLK_MIXER1>; > >> >> > + clock-names = "bus", > >> >> > + "mod"; > >> >> > + resets = <&display_clocks RST_WB>; > >> >> > + > >> >> > + ports { > >> >> > + #address-cells = <1>; > >> >> > + #size-cells = <0>; > >> >> > + > >> >> > + mixer1_out: port@1 { > >> >> > + reg = <1>; > >> >> > + mixer1_out_tcon_top: > >> >> > endpoint { > >> >> > + remote-endpoint = > >> >> > <&tcon_top_mixer1_in_mixer1>; + > >> >> > }; > >> >> > + }; > >> >> > + }; > >> >> > + }; > >> >> > + > >> >> > > >> >> > nmi_intc: interrupt-controller@1c00030 { > >> >> > > >> >> > compatible = "allwinner,sun7i-a20-sc-nmi"; > >> >> > interrupt-controller; > >> >> > > >> >> > @@ -451,6 +518,163 @@ > >> >> > > >> >> > #size-cells = <0>; > >> >> > > >> >> > }; > >> >> > > >> >> > + tcon_top: tcon-top@1c70000 { > >> >> > + compatible = "allwinner,sun8i-r40-tcon-top"; > >> >> > + reg = <0x01c70000 0x1000>; > >> >> > + clocks = <&ccu CLK_BUS_TCON_TOP>, > >> >> > + <&ccu CLK_TCON_TV0>, > >> >> > + <&ccu CLK_TVE0>, > >> >> > + <&ccu CLK_TCON_TV1>, > >> >> > + <&ccu CLK_TVE1>, > >> >> > + <&ccu CLK_DSI_DPHY>; > >> >> > + clock-names = "bus", > >> >> > + "tcon-tv0", > >> >> > + "tve0", > >> >> > + "tcon-tv1", > >> >> > + "tve1", > >> >> > + "dsi"; > >> >> > + clock-output-names = "tcon-top-tv0", > >> >> > + "tcon-top-tv1", > >> >> > + "tcon-top-dsi"; > >> >> > + resets = <&ccu RST_BUS_TCON_TOP>; > >> >> > + #clock-cells = <1>; > >> >> > + > >> >> > + ports { > >> >> > + #address-cells = <1>; > >> >> > + #size-cells = <0>; > >> >> > + > >> >> > + tcon_top_mixer0_in: port@0 { > >> >> > + reg = <0>; > >> >> > + > >> >> > + tcon_top_mixer0_in_mixer0: > >> >> > endpoint { + > >> >> > remote-endpoint = <&mixer0_out_tcon_top>; + > >> >> > > >> >> > }; > >> >> > > >> >> > + }; > >> >> > + > >> >> > + tcon_top_mixer0_out: port@1 { > >> >> > + #address-cells = <1>; > >> >> > + #size-cells = <0>; > >> >> > + reg = <1>; > >> >> > + > >> >> > + > >> >> > tcon_top_mixer0_out_tcon_lcd0: > >> >> > endpoint@0 { + reg = > >> >> > <0>; > >> >> > + }; > >> >> > + > >> >> > + > >> >> > tcon_top_mixer0_out_tcon_lcd1: > >> >> > endpoint@1 { + reg = > >> >> > <1>; > >> >> > + }; > >> >> > + > >> >> > + > >> >> > tcon_top_mixer0_out_tcon_tv0: > >> >> > endpoint@2 { + reg = > >> >> > <2>; > >> >> > + }; > >> >> > + > >> >> > + > >> >> > tcon_top_mixer0_out_tcon_tv1: > >> >> > endpoint@3 { + reg = > >> >> > <3>; > >> >> > + }; > >> >> > + }; > >> >> > + > >> >> > + tcon_top_mixer1_in: port@2 { > >> >> > + reg = <2>; > >> >> > + > >> >> > + tcon_top_mixer1_in_mixer1: > >> >> > endpoint { + > >> >> > remote-endpoint = <&mixer1_out_tcon_top>; + > >> >> > > >> >> > }; > >> >> > > >> >> > + }; > >> >> > + > >> >> > + tcon_top_mixer1_out: port@3 { > >> >> > + #address-cells = <1>; > >> >> > + #size-cells = <0>; > >> >> > + reg = <3>; > >> >> > + > >> >> > + > >> >> > tcon_top_mixer1_out_tcon_lcd0: > >> >> > endpoint@0 { + reg = > >> >> > <0>; > >> >> > + }; > >> >> > + > >> >> > + > >> >> > tcon_top_mixer1_out_tcon_lcd1: > >> >> > endpoint@1 { + reg = > >> >> > <1>; > >> >> > + }; > >> >> > + > >> >> > + > >> >> > tcon_top_mixer1_out_tcon_tv0: > >> >> > endpoint@2 { + reg = > >> >> > <2>; > >> >> > + }; > >> >> > + > >> >> > + > >> >> > tcon_top_mixer1_out_tcon_tv1: > >> >> > endpoint@3 { + reg = > >> >> > <3>; > >> >> > + }; > >> >> > + }; > >> >> > + > >> >> > + tcon_top_hdmi_in: port@4 { > >> >> > + #address-cells = <1>; > >> >> > + #size-cells = <0>; > >> >> > + reg = <4>; > >> >> > + > >> >> > + tcon_top_hdmi_in_tcon_tv0: > >> >> > endpoint@0 { + reg = > >> >> > <0>; > >> >> > + }; > >> >> > + > >> >> > + tcon_top_hdmi_in_tcon_tv1: > >> >> > endpoint@1 { + reg = > >> >> > <1>; > >> >> > + }; > >> >> > + }; > >> >> > + > >> >> > + tcon_top_hdmi_out: port@5 { > >> >> > + reg = <5>; > >> >> > + > >> >> > + tcon_top_hdmi_out_hdmi: > >> >> > endpoint { > >> >> > + remote-endpoint = > >> >> > <&hdmi_in_tcon_top>; + }; > >> >> > + }; > >> >> > + }; > >> >> > + }; > >> >> > + > >> >> > + tcon_tv0: lcd-controller@1c73000 { > >> >> > + compatible = "allwinner,sun8i-r40-tcon-tv", > >> >> > + "allwinner,sun8i-a83t-tcon-tv"; > >> >> > + reg = <0x01c73000 0x1000>; > >> >> > + interrupts = <GIC_SPI 51 > >> >> > IRQ_TYPE_LEVEL_HIGH>; > >> >> > + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top > >> >> > 0>; > >> >> > + clock-names = "ahb", "tcon-ch1"; > >> >> > + resets = <&ccu RST_BUS_TCON_TV0>; > >> >> > + reset-names = "lcd"; > >> >> > + > >> >> > + ports { > >> >> > + #address-cells = <1>; > >> >> > + #size-cells = <0>; > >> >> > + > >> >> > + tcon_tv0_in: port@0 { > >> >> > + reg = <0>; > >> >> > + }; > >> >> > + > >> >> > + tcon_tv0_out: port@1 { > >> >> > + reg = <1>; > >> >> > + }; > >> >> > + }; > >> >> > + }; > >> >> > + > >> >> > + tcon_tv1: lcd-controller@1c74000 { > >> >> > + compatible = "allwinner,sun8i-r40-tcon-tv", > >> >> > + "allwinner,sun8i-a83t-tcon-tv"; > >> >> > + reg = <0x01c74000 0x1000>; > >> >> > + interrupts = <GIC_SPI 52 > >> >> > IRQ_TYPE_LEVEL_HIGH>; > >> >> > + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top > >> >> > 1>; > >> >> > + clock-names = "ahb", "tcon-ch1"; > >> >> > + resets = <&ccu RST_BUS_TCON_TV1>; > >> >> > + reset-names = "lcd"; > >> >> > + > >> >> > + ports { > >> >> > + #address-cells = <1>; > >> >> > + #size-cells = <0>; > >> >> > + > >> >> > + tcon_tv1_in: port@0 { > >> >> > + reg = <0>; > >> >> > + }; > >> >> > + > >> >> > + tcon_tv1_out: port@1 { > >> >> > + reg = <1>; > >> >> > >> >> You are missing the remote-endpoints for all the TCON-TOP <-> TCON > >> >> connections. Also, on the driver side, there's no code to handle > >> >> dynamically mapping mixers to the TCONs that are being used. In the > >> >> past > >> >> we > >> >> had simple 1:1 mappings. This is no longer the case, and it needs to > >> >> be > >> >> dealt with. > >> > > >> > How would TCON TOP driver know how to set muxes? There are no > >> > appropriate > >> > bingings for muxes, except for V4L2 subsystem, which doesn't really > >> > work > >> > here. > >> > >> This will end up being a bunch of custom functions exported from the TCON > >> TOP driver to the TCON driver. As for bindings, the stuff you already > >> have > >> is mostly enough. You do have to specify the endpoint ID vs component > >> mapping, so you can find the correct one. > >> > >> For example, you would specify that the IDs for TCON LCDs be 0 and 1, and > >> TCON TVs be 2 and 3. Matching the actual register values is a nice > >> convenience. These would be used by the driver as the TCON ID. > > > > So something that's already done (minus full connections). > > > >> Also, we might want to consider them as two pairs of two TCONs (LCD + > >> TV). > >> The CRTC in DRM land is actually the mixer + TCON on our platform. This > >> means we only have two CRTCs. So we could have CRTC 0 = mixer 0 + TCON > >> LCD > >> 0 + TCON TV 0. The "TCON_TVx_OUTSEL" and "DE_PORTx PERH Select" muxes > >> would > >> be set at run time in the mode set function, selecting either LCD or TV > >> based on what encoder is attached. > > > > That proposal would still limit some combinations. For example, that would > > put DSI always on mixer1, since it can be connected to only LCD TCON 1. > > It can also cause undesired combination in laptop solutions. Consider > > that PCB designer connected LCD1 pins to panel for some reason. Panel is > > definetly main screen and should definetly be connected to mixer0, but in > > that case, it would be to mixer1. > > There's no reason we can't have dynamically assigned mixer+tcon pairs, but > that would mean implementing additional scheduling code that we don't have > yet. The current sunxi-drm and CRTC code assume static mappings. I just remembered that your proposed solution while should work on R40, doesn't really fit in H6 case (which is the main reason for this series). There are only LCD TCON 0 and TV TCON 0. Their HW IDs are the same as on R40 (1 and 3). Additionaly, there is also HDMI mux as on R40, although there is only one TV TCON, which can be used only for HDMI (TV output is connected to LCD TCON through AC200 bridge, put on same die or glued in same package, not really sure and doesn't really matter). I would like to write something which is also going to work for H6 out of the box. For H6, following combination would work well: mixer0 = LCD TCON 1 + TV TCON 0 mixer1 = LCD TCON 0 + TV TCON 1 Or alternatively, we can leave that to mux callback in TCON which would take care for best variant for given SoC. Once we concur on that, I'll try to implement something. > > We could do this as a second step if you're up to it. For my ultimate goal, which is 1st class Kodi experience on mainline, current proposal works in any case (mixer1 is enough). I just don't like solutions which are not universal. > > > Additionaly, since HDMI would became floating between TV TCON 0 and 1, > > whoever would write board DT would need to know this and enable only TV > > TCON1 if LCD is desired to be connected to mixer0 (or vice versa). > > There's no reason not to have all TCONs enabled by default. We would > consider the display-engine node controlling whether everything actually > gets used. > > If we really want universal solution with full connections, addtional > > property has to be defined and used for that. > > > >> This limitation is a software one, and should not bleed over into the > >> hardware representation. > >> > >> > Additionaly, how would HDMI know which TCON belongs to it to > >> > appropriately > >> > set possible_crtcs? > >> > >> HDMI is connected to the two TCON TVs through the TCON TOP mux. We handle > >> TCON output muxing in the TCON driver, using the set_mux callback in the > >> quirks. For R40, this callback would probably call into the TCON TOP > >> driver > >> asking it to set the mux to some value. > >> > >> > Currently, my idea is that board DT creates wanted connections. Since > >> > there is only one valid connection for each mux, driver knows eactly > >> > what > >> > to write into mux register. HDMI driver can simply check which TCON > >> > connection is valid in HDMI input mux and select it in possible_crtcs. > >> > >> But that is not how the actual hardware looks like. The device tree > >> should > >> model the hardware, not a subset of it just because one thinks the > >> implementation is difficult or won't be used at all. > >> > >> Furthermore, I think you have it backwards. possible_crtcs is generated > >> based on (in our case) the connections between TCON and HDMI based on the > >> device tree graph. So if you have both hooked up, both will show up in > >> possible_crtcs, but only one crtc will actually be selected to feed the > >> HDMI encoder. If you really need to access the current crtc, the > >> drm_encoder struct contains a pointer to it. > >> > >> In DE 1.0 driver, we leave all the muxing to the TCON driver. See > >> > >> > >> https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/sun4i/sun4 > >> i_ > >> tcon.c#L537 > >> > >> So in a sense, the HDMI encoder should be and is hooked up to both TCONs, > >> but only one is active at any given time. > > > > So something like that I had in v1 series. I'll implement something > > similar. That would also mean we need R40 specific TV TCON compatible. > > I'll restore that. > > > > Just a question on future situation when TVE driver will be implemented. > > Suppose that R40 board has TVE0 and HDMI as outputs. This would mean that > > TVE0 has possible crtcs set as 0b01 and HDMI 0b11. Will be DRM framework > > smart enough that it will put HDMI on second crtc because TVE0 can be > > connected to only to first crtc? > > Yes. If the possible_clones setting for the encoder is not set, the DRM > framework will not do mirroring, and will keep each active encoder on a > separate crtc. > > >> > Please also note that mixer0 and mixer1 don't have same capabilities > >> > and > >> > you generally want mixer0 to be connected to main output. This is in > >> > contrast to DE1 SoCs, where both backends and both frontends have same > >> > capability. > >> > >> Yes. But who's to say the two display outputs can't be reversed or > >> swapped > >> around? With fixed singular connections, you also rule out mirrored > >> output. > > > > I don't think there is standard way to swap around mixers at runtime, > > expecially if crtcs are represented as mixer + TCON pair. > > As I mentioned above, we will have to do this on our own. > > > I'm not sure what do you mean with mirrored output or at least why > > singular > > connections would prevent mirroring. HW mirroring needs DRM writeback > > support which is currently in RFC phase if I'm not mistaken. Once > > implemented in DRM framework and in sun4i-drm, it would be possible only > > to mirror mixer0 -> mixer1, because mixer1 doesn't support writeback (at > > least on existing SoCs). > What I meant was it might be possible to drive two TCONs with one mixer, or > two encoders with one TCON. I guess the latter is not possible since each > TCON only has one channel. Not sure about the former. I think neither of this two variants are possible, because outputs would have to have exactly the same resolution and in second case even the same pixel clock, which is very unlikely. Best regards, Jernej > Regards > ChenYu > > > Best regards, > > Jernej > > > >> ChenYu > >> > >> >> ChenYu > >> >> > >> >> > + }; > >> >> > + }; > >> >> > + }; > >> >> > + > >> >> > > >> >> > gic: interrupt-controller@1c81000 { > >> >> > > >> >> > compatible = "arm,gic-400"; > >> >> > reg = <0x01c81000 0x1000>, > >> >> > > >> >> > @@ -461,6 +685,51 @@ > >> >> > > >> >> > #interrupt-cells = <3>; > >> >> > interrupts = <GIC_PPI 9 > >> >> > (GIC_CPU_MASK_SIMPLE(4) > >> >> > > >> >> > IRQ_TYPE_LEVEL_HIGH)>; > >> >> > > >> >> > }; > >> >> > > >> >> > + > >> >> > + hdmi: hdmi@1ee0000 { > >> >> > + compatible = "allwinner,sun8i-r40-dw-hdmi", > >> >> > + "allwinner,sun8i-a83t-dw-hdmi"; > >> >> > + reg = <0x01ee0000 0x10000>; > >> >> > + reg-io-width = <1>; > >> >> > + interrupts = <GIC_SPI 58 > >> >> > IRQ_TYPE_LEVEL_HIGH>; > >> >> > + clocks = <&ccu CLK_BUS_HDMI0>, <&ccu > >> >> > CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; > >> >> > + clock-names = "iahb", "isfr", "tmds"; > >> >> > + resets = <&ccu RST_BUS_HDMI1>; > >> >> > + reset-names = "ctrl"; > >> >> > + phys = <&hdmi_phy>; > >> >> > + phy-names = "hdmi-phy"; > >> >> > + status = "disabled"; > >> >> > + > >> >> > + ports { > >> >> > + #address-cells = <1>; > >> >> > + #size-cells = <0>; > >> >> > + > >> >> > + hdmi_in: port@0 { > >> >> > + reg = <0>; > >> >> > + > >> >> > + hdmi_in_tcon_top: endpoint { > >> >> > + remote-endpoint = > >> >> > <&tcon_top_hdmi_out_hdmi>; + > >> >> > }; > >> >> > + }; > >> >> > + > >> >> > + hdmi_out: port@1 { > >> >> > + reg = <1>; > >> >> > + }; > >> >> > + }; > >> >> > + }; > >> >> > + > >> >> > + hdmi_phy: hdmi-phy@1ef0000 { > >> >> > + compatible = "allwinner,sun8i-r40-hdmi-phy", > >> >> > + > >> >> > "allwinner,sun50i-a64-hdmi-phy"; > >> >> > + reg = <0x01ef0000 0x10000>; > >> >> > + clocks = <&ccu CLK_BUS_HDMI1>, <&ccu > >> >> > CLK_HDMI_SLOW>, + <&ccu 7>, <&ccu > >> >> > 16>; > >> >> > + clock-names = "bus", "mod", "pll-0", > >> >> > "pll-1"; > >> >> > + resets = <&ccu RST_BUS_HDMI0>; > >> >> > + reset-names = "phy"; > >> >> > + #phy-cells = <0>; > >> >> > + }; > >> >> > > >> >> > }; > >> >> > > >> >> > timer { > >> >> > > >> >> > -- > >> >> > 2.18.0 > >> > > >> > -- > >> > You received this message because you are subscribed to the Google > >> > Groups > >> > "linux-sunxi" group. To unsubscribe from this group and stop receiving > >> > emails from it, send an email to > >> > linux-sunxi+unsubscribe@googlegroups.com. For more options, visit > >> > https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Jul 1, 2018 at 11:13 PM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > Dne nedelja, 01. julij 2018 ob 15:52:55 CEST je Chen-Yu Tsai napisal(a): >> On Sun, Jul 1, 2018 at 6:41 PM, Jernej Škrabec <jernej.skrabec@siol.net> > wrote: >> > Dne četrtek, 28. junij 2018 ob 08:51:07 CEST je Chen-Yu Tsai napisal(a): >> >> On Thu, Jun 28, 2018 at 1:15 PM, Jernej Škrabec <jernej.skrabec@siol.net> >> > >> > wrote: >> >> > Dne četrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai > napisal(a): >> >> >> On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec >> >> >> <jernej.skrabec@siol.net> >> >> > >> >> > wrote: >> >> >> > Add all entries needed for HDMI to function properly. >> >> >> > >> >> >> > Since R40 has highly configurable pipeline, both mixers and both >> >> >> > TCON >> >> >> > TVs are added. Board specific DT should then connect them together >> >> >> > trough TCON TOP muxers to best fit the purpose of the board. >> >> >> > >> >> >> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> >> >> >> > --- >> >> >> > >> >> >> > arch/arm/boot/dts/sun8i-r40.dtsi | 269 >> >> >> > +++++++++++++++++++++++++++++++ >> >> >> > 1 file changed, 269 insertions(+) >> >> >> > >> >> >> > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi >> >> >> > b/arch/arm/boot/dts/sun8i-r40.dtsi index 173dcc1652d2..a2a75fb04caf >> >> >> > 100644 >> >> >> > --- a/arch/arm/boot/dts/sun8i-r40.dtsi >> >> >> > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi >> >> >> > @@ -42,8 +42,11 @@ >> >> >> > >> >> >> > */ >> >> >> > >> >> >> > #include <dt-bindings/interrupt-controller/arm-gic.h> >> >> >> > >> >> >> > +#include <dt-bindings/clock/sun8i-de2.h> >> >> >> > >> >> >> > #include <dt-bindings/clock/sun8i-r40-ccu.h> >> >> >> > >> >> >> > +#include <dt-bindings/clock/sun8i-tcon-top.h> >> >> > >> >> > Maxime, above line breaks compilation for build robot, sorry. >> >> > >> >> >> > #include <dt-bindings/reset/sun8i-r40-ccu.h> >> >> >> > >> >> >> > +#include <dt-bindings/reset/sun8i-de2.h> >> >> >> > >> >> >> > / { >> >> >> > >> >> >> > #address-cells = <1>; >> >> >> > >> >> >> > @@ -99,12 +102,76 @@ >> >> >> > >> >> >> > }; >> >> >> > >> >> >> > }; >> >> >> > >> >> >> > + de: display-engine { >> >> >> > + compatible = "allwinner,sun8i-r40-display-engine", >> >> >> > + "allwinner,sun8i-h3-display-engine"; >> >> >> >> >> >> Given that the display pipeline looks different, they should not be >> >> >> compatible. >> >> > >> >> > Ok. >> >> > >> >> >> > + allwinner,pipelines = <&mixer0>, <&mixer1>; >> >> >> > + status = "disabled"; >> >> >> > + }; >> >> >> > + >> >> >> > >> >> >> > soc { >> >> >> > >> >> >> > compatible = "simple-bus"; >> >> >> > #address-cells = <1>; >> >> >> > #size-cells = <1>; >> >> >> > ranges; >> >> >> > >> >> >> > + display_clocks: clock@1000000 { >> >> >> > + compatible = "allwinner,sun8i-r40-de2-clk", >> >> >> > + "allwinner,sun8i-h3-de2-clk"; >> >> >> > + reg = <0x01000000 0x100000>; >> >> >> > + clocks = <&ccu CLK_DE>, >> >> >> > + <&ccu CLK_BUS_DE>; >> >> >> > + clock-names = "mod", >> >> >> > + "bus"; >> >> >> > + resets = <&ccu RST_BUS_DE>; >> >> >> > + #clock-cells = <1>; >> >> >> > + #reset-cells = <1>; >> >> >> > + }; >> >> >> > + >> >> >> > + mixer0: mixer@1100000 { >> >> >> > + compatible = >> >> >> > "allwinner,sun8i-r40-de2-mixer-0"; >> >> >> > + reg = <0x01100000 0x100000>; >> >> >> > + clocks = <&display_clocks CLK_BUS_MIXER0>, >> >> >> > + <&display_clocks CLK_MIXER0>; >> >> >> > + clock-names = "bus", >> >> >> > + "mod"; >> >> >> > + resets = <&display_clocks RST_MIXER0>; >> >> >> > + >> >> >> > + ports { >> >> >> > + #address-cells = <1>; >> >> >> > + #size-cells = <0>; >> >> >> > + >> >> >> > + mixer0_out: port@1 { >> >> >> > + reg = <1>; >> >> >> > + mixer0_out_tcon_top: >> >> >> > endpoint { >> >> >> > + remote-endpoint = >> >> >> > <&tcon_top_mixer0_in_mixer0>; + >> >> >> > }; >> >> >> > + }; >> >> >> > + }; >> >> >> > + }; >> >> >> > + >> >> >> > + mixer1: mixer@1200000 { >> >> >> > + compatible = >> >> >> > "allwinner,sun8i-r40-de2-mixer-1"; >> >> >> > + reg = <0x01200000 0x100000>; >> >> >> > + clocks = <&display_clocks CLK_BUS_MIXER1>, >> >> >> > + <&display_clocks CLK_MIXER1>; >> >> >> > + clock-names = "bus", >> >> >> > + "mod"; >> >> >> > + resets = <&display_clocks RST_WB>; >> >> >> > + >> >> >> > + ports { >> >> >> > + #address-cells = <1>; >> >> >> > + #size-cells = <0>; >> >> >> > + >> >> >> > + mixer1_out: port@1 { >> >> >> > + reg = <1>; >> >> >> > + mixer1_out_tcon_top: >> >> >> > endpoint { >> >> >> > + remote-endpoint = >> >> >> > <&tcon_top_mixer1_in_mixer1>; + >> >> >> > }; >> >> >> > + }; >> >> >> > + }; >> >> >> > + }; >> >> >> > + >> >> >> > >> >> >> > nmi_intc: interrupt-controller@1c00030 { >> >> >> > >> >> >> > compatible = "allwinner,sun7i-a20-sc-nmi"; >> >> >> > interrupt-controller; >> >> >> > >> >> >> > @@ -451,6 +518,163 @@ >> >> >> > >> >> >> > #size-cells = <0>; >> >> >> > >> >> >> > }; >> >> >> > >> >> >> > + tcon_top: tcon-top@1c70000 { >> >> >> > + compatible = "allwinner,sun8i-r40-tcon-top"; >> >> >> > + reg = <0x01c70000 0x1000>; >> >> >> > + clocks = <&ccu CLK_BUS_TCON_TOP>, >> >> >> > + <&ccu CLK_TCON_TV0>, >> >> >> > + <&ccu CLK_TVE0>, >> >> >> > + <&ccu CLK_TCON_TV1>, >> >> >> > + <&ccu CLK_TVE1>, >> >> >> > + <&ccu CLK_DSI_DPHY>; >> >> >> > + clock-names = "bus", >> >> >> > + "tcon-tv0", >> >> >> > + "tve0", >> >> >> > + "tcon-tv1", >> >> >> > + "tve1", >> >> >> > + "dsi"; >> >> >> > + clock-output-names = "tcon-top-tv0", >> >> >> > + "tcon-top-tv1", >> >> >> > + "tcon-top-dsi"; >> >> >> > + resets = <&ccu RST_BUS_TCON_TOP>; >> >> >> > + #clock-cells = <1>; >> >> >> > + >> >> >> > + ports { >> >> >> > + #address-cells = <1>; >> >> >> > + #size-cells = <0>; >> >> >> > + >> >> >> > + tcon_top_mixer0_in: port@0 { >> >> >> > + reg = <0>; >> >> >> > + >> >> >> > + tcon_top_mixer0_in_mixer0: >> >> >> > endpoint { + >> >> >> > remote-endpoint = <&mixer0_out_tcon_top>; + >> >> >> > >> >> >> > }; >> >> >> > >> >> >> > + }; >> >> >> > + >> >> >> > + tcon_top_mixer0_out: port@1 { >> >> >> > + #address-cells = <1>; >> >> >> > + #size-cells = <0>; >> >> >> > + reg = <1>; >> >> >> > + >> >> >> > + >> >> >> > tcon_top_mixer0_out_tcon_lcd0: >> >> >> > endpoint@0 { + reg = >> >> >> > <0>; >> >> >> > + }; >> >> >> > + >> >> >> > + >> >> >> > tcon_top_mixer0_out_tcon_lcd1: >> >> >> > endpoint@1 { + reg = >> >> >> > <1>; >> >> >> > + }; >> >> >> > + >> >> >> > + >> >> >> > tcon_top_mixer0_out_tcon_tv0: >> >> >> > endpoint@2 { + reg = >> >> >> > <2>; >> >> >> > + }; >> >> >> > + >> >> >> > + >> >> >> > tcon_top_mixer0_out_tcon_tv1: >> >> >> > endpoint@3 { + reg = >> >> >> > <3>; >> >> >> > + }; >> >> >> > + }; >> >> >> > + >> >> >> > + tcon_top_mixer1_in: port@2 { >> >> >> > + reg = <2>; >> >> >> > + >> >> >> > + tcon_top_mixer1_in_mixer1: >> >> >> > endpoint { + >> >> >> > remote-endpoint = <&mixer1_out_tcon_top>; + >> >> >> > >> >> >> > }; >> >> >> > >> >> >> > + }; >> >> >> > + >> >> >> > + tcon_top_mixer1_out: port@3 { >> >> >> > + #address-cells = <1>; >> >> >> > + #size-cells = <0>; >> >> >> > + reg = <3>; >> >> >> > + >> >> >> > + >> >> >> > tcon_top_mixer1_out_tcon_lcd0: >> >> >> > endpoint@0 { + reg = >> >> >> > <0>; >> >> >> > + }; >> >> >> > + >> >> >> > + >> >> >> > tcon_top_mixer1_out_tcon_lcd1: >> >> >> > endpoint@1 { + reg = >> >> >> > <1>; >> >> >> > + }; >> >> >> > + >> >> >> > + >> >> >> > tcon_top_mixer1_out_tcon_tv0: >> >> >> > endpoint@2 { + reg = >> >> >> > <2>; >> >> >> > + }; >> >> >> > + >> >> >> > + >> >> >> > tcon_top_mixer1_out_tcon_tv1: >> >> >> > endpoint@3 { + reg = >> >> >> > <3>; >> >> >> > + }; >> >> >> > + }; >> >> >> > + >> >> >> > + tcon_top_hdmi_in: port@4 { >> >> >> > + #address-cells = <1>; >> >> >> > + #size-cells = <0>; >> >> >> > + reg = <4>; >> >> >> > + >> >> >> > + tcon_top_hdmi_in_tcon_tv0: >> >> >> > endpoint@0 { + reg = >> >> >> > <0>; >> >> >> > + }; >> >> >> > + >> >> >> > + tcon_top_hdmi_in_tcon_tv1: >> >> >> > endpoint@1 { + reg = >> >> >> > <1>; >> >> >> > + }; >> >> >> > + }; >> >> >> > + >> >> >> > + tcon_top_hdmi_out: port@5 { >> >> >> > + reg = <5>; >> >> >> > + >> >> >> > + tcon_top_hdmi_out_hdmi: >> >> >> > endpoint { >> >> >> > + remote-endpoint = >> >> >> > <&hdmi_in_tcon_top>; + }; >> >> >> > + }; >> >> >> > + }; >> >> >> > + }; >> >> >> > + >> >> >> > + tcon_tv0: lcd-controller@1c73000 { >> >> >> > + compatible = "allwinner,sun8i-r40-tcon-tv", >> >> >> > + "allwinner,sun8i-a83t-tcon-tv"; >> >> >> > + reg = <0x01c73000 0x1000>; >> >> >> > + interrupts = <GIC_SPI 51 >> >> >> > IRQ_TYPE_LEVEL_HIGH>; >> >> >> > + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top >> >> >> > 0>; >> >> >> > + clock-names = "ahb", "tcon-ch1"; >> >> >> > + resets = <&ccu RST_BUS_TCON_TV0>; >> >> >> > + reset-names = "lcd"; >> >> >> > + >> >> >> > + ports { >> >> >> > + #address-cells = <1>; >> >> >> > + #size-cells = <0>; >> >> >> > + >> >> >> > + tcon_tv0_in: port@0 { >> >> >> > + reg = <0>; >> >> >> > + }; >> >> >> > + >> >> >> > + tcon_tv0_out: port@1 { >> >> >> > + reg = <1>; >> >> >> > + }; >> >> >> > + }; >> >> >> > + }; >> >> >> > + >> >> >> > + tcon_tv1: lcd-controller@1c74000 { >> >> >> > + compatible = "allwinner,sun8i-r40-tcon-tv", >> >> >> > + "allwinner,sun8i-a83t-tcon-tv"; >> >> >> > + reg = <0x01c74000 0x1000>; >> >> >> > + interrupts = <GIC_SPI 52 >> >> >> > IRQ_TYPE_LEVEL_HIGH>; >> >> >> > + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top >> >> >> > 1>; >> >> >> > + clock-names = "ahb", "tcon-ch1"; >> >> >> > + resets = <&ccu RST_BUS_TCON_TV1>; >> >> >> > + reset-names = "lcd"; >> >> >> > + >> >> >> > + ports { >> >> >> > + #address-cells = <1>; >> >> >> > + #size-cells = <0>; >> >> >> > + >> >> >> > + tcon_tv1_in: port@0 { >> >> >> > + reg = <0>; >> >> >> > + }; >> >> >> > + >> >> >> > + tcon_tv1_out: port@1 { >> >> >> > + reg = <1>; >> >> >> >> >> >> You are missing the remote-endpoints for all the TCON-TOP <-> TCON >> >> >> connections. Also, on the driver side, there's no code to handle >> >> >> dynamically mapping mixers to the TCONs that are being used. In the >> >> >> past >> >> >> we >> >> >> had simple 1:1 mappings. This is no longer the case, and it needs to >> >> >> be >> >> >> dealt with. >> >> > >> >> > How would TCON TOP driver know how to set muxes? There are no >> >> > appropriate >> >> > bingings for muxes, except for V4L2 subsystem, which doesn't really >> >> > work >> >> > here. >> >> >> >> This will end up being a bunch of custom functions exported from the TCON >> >> TOP driver to the TCON driver. As for bindings, the stuff you already >> >> have >> >> is mostly enough. You do have to specify the endpoint ID vs component >> >> mapping, so you can find the correct one. >> >> >> >> For example, you would specify that the IDs for TCON LCDs be 0 and 1, and >> >> TCON TVs be 2 and 3. Matching the actual register values is a nice >> >> convenience. These would be used by the driver as the TCON ID. >> > >> > So something that's already done (minus full connections). >> > >> >> Also, we might want to consider them as two pairs of two TCONs (LCD + >> >> TV). >> >> The CRTC in DRM land is actually the mixer + TCON on our platform. This >> >> means we only have two CRTCs. So we could have CRTC 0 = mixer 0 + TCON >> >> LCD >> >> 0 + TCON TV 0. The "TCON_TVx_OUTSEL" and "DE_PORTx PERH Select" muxes >> >> would >> >> be set at run time in the mode set function, selecting either LCD or TV >> >> based on what encoder is attached. >> > >> > That proposal would still limit some combinations. For example, that would >> > put DSI always on mixer1, since it can be connected to only LCD TCON 1. >> > It can also cause undesired combination in laptop solutions. Consider >> > that PCB designer connected LCD1 pins to panel for some reason. Panel is >> > definetly main screen and should definetly be connected to mixer0, but in >> > that case, it would be to mixer1. >> >> There's no reason we can't have dynamically assigned mixer+tcon pairs, but >> that would mean implementing additional scheduling code that we don't have >> yet. The current sunxi-drm and CRTC code assume static mappings. > > I just remembered that your proposed solution while should work on R40, > doesn't really fit in H6 case (which is the main reason for this series). > > There are only LCD TCON 0 and TV TCON 0. Their HW IDs are the same as on R40 > (1 and 3). Additionaly, there is also HDMI mux as on R40, although there is > only one TV TCON, which can be used only for HDMI (TV output is connected to > LCD TCON through AC200 bridge, put on same die or glued in same package, not > really sure and doesn't really matter). OK. So even there's only one TV TCON, you still have to program all muxes with the correct value, to prevent a) a bad value left by the bootloader and b) bad reset default values. > I would like to write something which is also going to work for H6 out of the > box. For H6, following combination would work well: > mixer0 = LCD TCON 1 + TV TCON 0 > mixer1 = LCD TCON 0 + TV TCON 1 > > Or alternatively, we can leave that to mux callback in TCON which would take > care for best variant for given SoC. I think that is the ultimate goal. However, the muxing would be a bit complicated. For all the past SoCs, we were dealing with muxing the downstream encoder. Now we will be muxing mixer and tcon connections as well. You would also have to dynamically switch around the mixer and/or tcon pointers in sun4i_crtc so existing code can still work. > Once we concur on that, I'll try to implement something. > >> >> We could do this as a second step if you're up to it. > > For my ultimate goal, which is 1st class Kodi experience on mainline, current > proposal works in any case (mixer1 is enough). I just don't like solutions > which are not universal. > >> >> > Additionaly, since HDMI would became floating between TV TCON 0 and 1, >> > whoever would write board DT would need to know this and enable only TV >> > TCON1 if LCD is desired to be connected to mixer0 (or vice versa). >> >> There's no reason not to have all TCONs enabled by default. We would >> consider the display-engine node controlling whether everything actually >> gets used. >> > If we really want universal solution with full connections, addtional >> > property has to be defined and used for that. >> > >> >> This limitation is a software one, and should not bleed over into the >> >> hardware representation. >> >> >> >> > Additionaly, how would HDMI know which TCON belongs to it to >> >> > appropriately >> >> > set possible_crtcs? >> >> >> >> HDMI is connected to the two TCON TVs through the TCON TOP mux. We handle >> >> TCON output muxing in the TCON driver, using the set_mux callback in the >> >> quirks. For R40, this callback would probably call into the TCON TOP >> >> driver >> >> asking it to set the mux to some value. >> >> >> >> > Currently, my idea is that board DT creates wanted connections. Since >> >> > there is only one valid connection for each mux, driver knows eactly >> >> > what >> >> > to write into mux register. HDMI driver can simply check which TCON >> >> > connection is valid in HDMI input mux and select it in possible_crtcs. >> >> >> >> But that is not how the actual hardware looks like. The device tree >> >> should >> >> model the hardware, not a subset of it just because one thinks the >> >> implementation is difficult or won't be used at all. >> >> >> >> Furthermore, I think you have it backwards. possible_crtcs is generated >> >> based on (in our case) the connections between TCON and HDMI based on the >> >> device tree graph. So if you have both hooked up, both will show up in >> >> possible_crtcs, but only one crtc will actually be selected to feed the >> >> HDMI encoder. If you really need to access the current crtc, the >> >> drm_encoder struct contains a pointer to it. >> >> >> >> In DE 1.0 driver, we leave all the muxing to the TCON driver. See >> >> >> >> >> >> https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/sun4i/sun4 >> >> i_ >> >> tcon.c#L537 >> >> >> >> So in a sense, the HDMI encoder should be and is hooked up to both TCONs, >> >> but only one is active at any given time. >> > >> > So something like that I had in v1 series. I'll implement something >> > similar. That would also mean we need R40 specific TV TCON compatible. >> > I'll restore that. >> > >> > Just a question on future situation when TVE driver will be implemented. >> > Suppose that R40 board has TVE0 and HDMI as outputs. This would mean that >> > TVE0 has possible crtcs set as 0b01 and HDMI 0b11. Will be DRM framework >> > smart enough that it will put HDMI on second crtc because TVE0 can be >> > connected to only to first crtc? >> >> Yes. If the possible_clones setting for the encoder is not set, the DRM >> framework will not do mirroring, and will keep each active encoder on a >> separate crtc. >> >> >> > Please also note that mixer0 and mixer1 don't have same capabilities >> >> > and >> >> > you generally want mixer0 to be connected to main output. This is in >> >> > contrast to DE1 SoCs, where both backends and both frontends have same >> >> > capability. >> >> >> >> Yes. But who's to say the two display outputs can't be reversed or >> >> swapped >> >> around? With fixed singular connections, you also rule out mirrored >> >> output. >> > >> > I don't think there is standard way to swap around mixers at runtime, >> > expecially if crtcs are represented as mixer + TCON pair. >> >> As I mentioned above, we will have to do this on our own. >> >> > I'm not sure what do you mean with mirrored output or at least why >> > singular >> > connections would prevent mirroring. HW mirroring needs DRM writeback >> > support which is currently in RFC phase if I'm not mistaken. Once >> > implemented in DRM framework and in sun4i-drm, it would be possible only >> > to mirror mixer0 -> mixer1, because mixer1 doesn't support writeback (at >> > least on existing SoCs). >> What I meant was it might be possible to drive two TCONs with one mixer, or >> two encoders with one TCON. I guess the latter is not possible since each >> TCON only has one channel. Not sure about the former. > > I think neither of this two variants are possible, because outputs would have > to have exactly the same resolution and in second case even the same pixel > clock, which is very unlikely. That is what mirroring is supposed to mean, right? For instance you could have VGA on one and HDMI on the other, at the same resolution and dotclock. As far as I'm concerned, the software doesn't need to have all features covered. But that doesn't mean the hardware representation can lack features as well. We already did that once, and now we have some legacy graph parsing code to handle that. Regards ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne petek, 29. junij 2018 ob 21:06:09 CEST je Jernej Škrabec napisal(a): > Dne četrtek, 28. junij 2018 ob 20:25:43 CEST je Maxime Ripard napisal(a): > > On Thu, Jun 28, 2018 at 06:48:50AM +0200, Jernej Škrabec wrote: > > > Dne četrtek, 28. junij 2018 ob 04:06:52 CEST je Chen-Yu Tsai napisal(a): > > > > On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec > > > > <jernej.skrabec@siol.net> > > > > > > wrote: > > > > > Current "old" method to find engine worked pretty well for DE2. > > > > > However, > > > > > it doesn't work when TCON TOP is between mixer (engine) and TCON. > > > > > TCON > > > > > TOP has multiple input ports, but current engine search algorithm > > > > > expects only one. > > > > > > > > > > This can be fixed by first looking for output port id and selecting > > > > > matching input by subtracting 1 for the next round. This work even > > > > > if > > > > > there is only one input and output. > > > > > > > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > > > > --- > > > > > > > > > > drivers/gpu/drm/sun4i/sun4i_tcon.c | 22 ++++++++++++++++++---- > > > > > 1 file changed, 18 insertions(+), 4 deletions(-) > > > > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > b/drivers/gpu/drm/sun4i/sun4i_tcon.c index > > > > > 08747fc3ee71..264bcc43da11 > > > > > 100644 > > > > > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > @@ -791,12 +791,14 @@ static int sun4i_tcon_init_regmap(struct > > > > > device > > > > > *dev, > > > > > > > > > > */ > > > > > > > > > > static struct sunxi_engine * > > > > > sun4i_tcon_find_engine_traverse(struct sun4i_drv *drv, > > > > > > > > > > - struct device_node *node) > > > > > + struct device_node *node, > > > > > + u32 port_id) > > > > > > > > > > { > > > > > > > > > > struct device_node *port, *ep, *remote; > > > > > struct sunxi_engine *engine = ERR_PTR(-EINVAL); > > > > > > > > > > + u32 reg = 0; > > > > > > > > > > - port = of_graph_get_port_by_id(node, 0); > > > > > + port = of_graph_get_port_by_id(node, port_id); > > > > > > > > > > if (!port) > > > > > > > > > > return ERR_PTR(-EINVAL); > > > > > > > > > > @@ -826,8 +828,20 @@ sun4i_tcon_find_engine_traverse(struct > > > > > sun4i_drv > > > > > *drv, > > > > > > > > > > if (remote == engine->node) > > > > > > > > > > goto out_put_remote; > > > > > > > > > > + /* > > > > > + * According to device tree binding input ports have even id > > > > > + * number and output ports have odd id. Since component with > > > > > + * more than one input and one output (TCON TOP) exits, > > > > > correct > > > > > + * remote input id has to be calculated by subtracting 1 > > > > > from > > > > > + * remote output id. If this for some reason can't be done, > > > > > 0 > > > > > + * is used as input port id. > > > > > + */ > > > > > > > > You need to call > > > > > > > > of_node_put(port); > > > > > > > > to drop the reference to the original port. > > > > > > Thanks for noticing it. I guess I should send fix patch, since patches > > > from > > > drm-misc-next can't be dropped. > > > > Yeah, please send additional patches for all the issues pointed out by > > Chen-Yu. > > Of course. I hope this can be resolved till the end of the next week. After > that, I will be away from PC for 2 weeks. Feel free to drop DT patches if > you think that it will come too close to merge window. Actually, can you drop it anyway? It needs a lot of changes and keeping HDMI working would need some effort. Best regards, Jernej -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dne nedelja, 01. julij 2018 ob 17:35:28 CEST je Chen-Yu Tsai napisal(a): > On Sun, Jul 1, 2018 at 11:13 PM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > > Dne nedelja, 01. julij 2018 ob 15:52:55 CEST je Chen-Yu Tsai napisal(a): > >> On Sun, Jul 1, 2018 at 6:41 PM, Jernej Škrabec <jernej.skrabec@siol.net> > > > > wrote: > >> > Dne četrtek, 28. junij 2018 ob 08:51:07 CEST je Chen-Yu Tsai napisal(a): > >> >> On Thu, Jun 28, 2018 at 1:15 PM, Jernej Škrabec > >> >> <jernej.skrabec@siol.net> > >> > > >> > wrote: > >> >> > Dne četrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai > > > > napisal(a): > >> >> >> On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec > >> >> >> <jernej.skrabec@siol.net> > >> >> > > >> >> > wrote: > >> >> >> > Add all entries needed for HDMI to function properly. > >> >> >> > > >> >> >> > Since R40 has highly configurable pipeline, both mixers and both > >> >> >> > TCON > >> >> >> > TVs are added. Board specific DT should then connect them > >> >> >> > together > >> >> >> > trough TCON TOP muxers to best fit the purpose of the board. > >> >> >> > > >> >> >> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > >> >> >> > --- > >> >> >> > > >> >> >> > arch/arm/boot/dts/sun8i-r40.dtsi | 269 > >> >> >> > +++++++++++++++++++++++++++++++ > >> >> >> > 1 file changed, 269 insertions(+) > >> >> >> > > >> >> >> > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi > >> >> >> > b/arch/arm/boot/dts/sun8i-r40.dtsi index > >> >> >> > 173dcc1652d2..a2a75fb04caf > >> >> >> > 100644 > >> >> >> > --- a/arch/arm/boot/dts/sun8i-r40.dtsi > >> >> >> > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi > >> >> >> > @@ -42,8 +42,11 @@ > >> >> >> > > >> >> >> > */ > >> >> >> > > >> >> >> > #include <dt-bindings/interrupt-controller/arm-gic.h> > >> >> >> > > >> >> >> > +#include <dt-bindings/clock/sun8i-de2.h> > >> >> >> > > >> >> >> > #include <dt-bindings/clock/sun8i-r40-ccu.h> > >> >> >> > > >> >> >> > +#include <dt-bindings/clock/sun8i-tcon-top.h> > >> >> > > >> >> > Maxime, above line breaks compilation for build robot, sorry. > >> >> > > >> >> >> > #include <dt-bindings/reset/sun8i-r40-ccu.h> > >> >> >> > > >> >> >> > +#include <dt-bindings/reset/sun8i-de2.h> > >> >> >> > > >> >> >> > / { > >> >> >> > > >> >> >> > #address-cells = <1>; > >> >> >> > > >> >> >> > @@ -99,12 +102,76 @@ > >> >> >> > > >> >> >> > }; > >> >> >> > > >> >> >> > }; > >> >> >> > > >> >> >> > + de: display-engine { > >> >> >> > + compatible = > >> >> >> > "allwinner,sun8i-r40-display-engine", > >> >> >> > + "allwinner,sun8i-h3-display-engine"; > >> >> >> > >> >> >> Given that the display pipeline looks different, they should not be > >> >> >> compatible. > >> >> > > >> >> > Ok. > >> >> > > >> >> >> > + allwinner,pipelines = <&mixer0>, <&mixer1>; > >> >> >> > + status = "disabled"; > >> >> >> > + }; > >> >> >> > + > >> >> >> > > >> >> >> > soc { > >> >> >> > > >> >> >> > compatible = "simple-bus"; > >> >> >> > #address-cells = <1>; > >> >> >> > #size-cells = <1>; > >> >> >> > ranges; > >> >> >> > > >> >> >> > + display_clocks: clock@1000000 { > >> >> >> > + compatible = > >> >> >> > "allwinner,sun8i-r40-de2-clk", > >> >> >> > + > >> >> >> > "allwinner,sun8i-h3-de2-clk"; > >> >> >> > + reg = <0x01000000 0x100000>; > >> >> >> > + clocks = <&ccu CLK_DE>, > >> >> >> > + <&ccu CLK_BUS_DE>; > >> >> >> > + clock-names = "mod", > >> >> >> > + "bus"; > >> >> >> > + resets = <&ccu RST_BUS_DE>; > >> >> >> > + #clock-cells = <1>; > >> >> >> > + #reset-cells = <1>; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + mixer0: mixer@1100000 { > >> >> >> > + compatible = > >> >> >> > "allwinner,sun8i-r40-de2-mixer-0"; > >> >> >> > + reg = <0x01100000 0x100000>; > >> >> >> > + clocks = <&display_clocks > >> >> >> > CLK_BUS_MIXER0>, > >> >> >> > + <&display_clocks CLK_MIXER0>; > >> >> >> > + clock-names = "bus", > >> >> >> > + "mod"; > >> >> >> > + resets = <&display_clocks RST_MIXER0>; > >> >> >> > + > >> >> >> > + ports { > >> >> >> > + #address-cells = <1>; > >> >> >> > + #size-cells = <0>; > >> >> >> > + > >> >> >> > + mixer0_out: port@1 { > >> >> >> > + reg = <1>; > >> >> >> > + mixer0_out_tcon_top: > >> >> >> > endpoint { > >> >> >> > + remote-endpoint = > >> >> >> > <&tcon_top_mixer0_in_mixer0>; + > >> >> >> > }; > >> >> >> > + }; > >> >> >> > + }; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + mixer1: mixer@1200000 { > >> >> >> > + compatible = > >> >> >> > "allwinner,sun8i-r40-de2-mixer-1"; > >> >> >> > + reg = <0x01200000 0x100000>; > >> >> >> > + clocks = <&display_clocks > >> >> >> > CLK_BUS_MIXER1>, > >> >> >> > + <&display_clocks CLK_MIXER1>; > >> >> >> > + clock-names = "bus", > >> >> >> > + "mod"; > >> >> >> > + resets = <&display_clocks RST_WB>; > >> >> >> > + > >> >> >> > + ports { > >> >> >> > + #address-cells = <1>; > >> >> >> > + #size-cells = <0>; > >> >> >> > + > >> >> >> > + mixer1_out: port@1 { > >> >> >> > + reg = <1>; > >> >> >> > + mixer1_out_tcon_top: > >> >> >> > endpoint { > >> >> >> > + remote-endpoint = > >> >> >> > <&tcon_top_mixer1_in_mixer1>; + > >> >> >> > }; > >> >> >> > + }; > >> >> >> > + }; > >> >> >> > + }; > >> >> >> > + > >> >> >> > > >> >> >> > nmi_intc: interrupt-controller@1c00030 { > >> >> >> > > >> >> >> > compatible = > >> >> >> > "allwinner,sun7i-a20-sc-nmi"; > >> >> >> > interrupt-controller; > >> >> >> > > >> >> >> > @@ -451,6 +518,163 @@ > >> >> >> > > >> >> >> > #size-cells = <0>; > >> >> >> > > >> >> >> > }; > >> >> >> > > >> >> >> > + tcon_top: tcon-top@1c70000 { > >> >> >> > + compatible = > >> >> >> > "allwinner,sun8i-r40-tcon-top"; > >> >> >> > + reg = <0x01c70000 0x1000>; > >> >> >> > + clocks = <&ccu CLK_BUS_TCON_TOP>, > >> >> >> > + <&ccu CLK_TCON_TV0>, > >> >> >> > + <&ccu CLK_TVE0>, > >> >> >> > + <&ccu CLK_TCON_TV1>, > >> >> >> > + <&ccu CLK_TVE1>, > >> >> >> > + <&ccu CLK_DSI_DPHY>; > >> >> >> > + clock-names = "bus", > >> >> >> > + "tcon-tv0", > >> >> >> > + "tve0", > >> >> >> > + "tcon-tv1", > >> >> >> > + "tve1", > >> >> >> > + "dsi"; > >> >> >> > + clock-output-names = "tcon-top-tv0", > >> >> >> > + "tcon-top-tv1", > >> >> >> > + "tcon-top-dsi"; > >> >> >> > + resets = <&ccu RST_BUS_TCON_TOP>; > >> >> >> > + #clock-cells = <1>; > >> >> >> > + > >> >> >> > + ports { > >> >> >> > + #address-cells = <1>; > >> >> >> > + #size-cells = <0>; > >> >> >> > + > >> >> >> > + tcon_top_mixer0_in: port@0 { > >> >> >> > + reg = <0>; > >> >> >> > + > >> >> >> > + > >> >> >> > tcon_top_mixer0_in_mixer0: > >> >> >> > endpoint { + > >> >> >> > remote-endpoint = <&mixer0_out_tcon_top>; + > >> >> >> > > >> >> >> > }; > >> >> >> > > >> >> >> > + }; > >> >> >> > + > >> >> >> > + tcon_top_mixer0_out: port@1 { > >> >> >> > + #address-cells = <1>; > >> >> >> > + #size-cells = <0>; > >> >> >> > + reg = <1>; > >> >> >> > + > >> >> >> > + > >> >> >> > tcon_top_mixer0_out_tcon_lcd0: > >> >> >> > endpoint@0 { + reg > >> >> >> > = > >> >> >> > <0>; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + > >> >> >> > tcon_top_mixer0_out_tcon_lcd1: > >> >> >> > endpoint@1 { + reg > >> >> >> > = > >> >> >> > <1>; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + > >> >> >> > tcon_top_mixer0_out_tcon_tv0: > >> >> >> > endpoint@2 { + reg > >> >> >> > = > >> >> >> > <2>; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + > >> >> >> > tcon_top_mixer0_out_tcon_tv1: > >> >> >> > endpoint@3 { + reg > >> >> >> > = > >> >> >> > <3>; > >> >> >> > + }; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + tcon_top_mixer1_in: port@2 { > >> >> >> > + reg = <2>; > >> >> >> > + > >> >> >> > + > >> >> >> > tcon_top_mixer1_in_mixer1: > >> >> >> > endpoint { + > >> >> >> > remote-endpoint = <&mixer1_out_tcon_top>; + > >> >> >> > > >> >> >> > }; > >> >> >> > > >> >> >> > + }; > >> >> >> > + > >> >> >> > + tcon_top_mixer1_out: port@3 { > >> >> >> > + #address-cells = <1>; > >> >> >> > + #size-cells = <0>; > >> >> >> > + reg = <3>; > >> >> >> > + > >> >> >> > + > >> >> >> > tcon_top_mixer1_out_tcon_lcd0: > >> >> >> > endpoint@0 { + reg > >> >> >> > = > >> >> >> > <0>; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + > >> >> >> > tcon_top_mixer1_out_tcon_lcd1: > >> >> >> > endpoint@1 { + reg > >> >> >> > = > >> >> >> > <1>; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + > >> >> >> > tcon_top_mixer1_out_tcon_tv0: > >> >> >> > endpoint@2 { + reg > >> >> >> > = > >> >> >> > <2>; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + > >> >> >> > tcon_top_mixer1_out_tcon_tv1: > >> >> >> > endpoint@3 { + reg > >> >> >> > = > >> >> >> > <3>; > >> >> >> > + }; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + tcon_top_hdmi_in: port@4 { > >> >> >> > + #address-cells = <1>; > >> >> >> > + #size-cells = <0>; > >> >> >> > + reg = <4>; > >> >> >> > + > >> >> >> > + > >> >> >> > tcon_top_hdmi_in_tcon_tv0: > >> >> >> > endpoint@0 { + reg > >> >> >> > = > >> >> >> > <0>; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + > >> >> >> > tcon_top_hdmi_in_tcon_tv1: > >> >> >> > endpoint@1 { + reg > >> >> >> > = > >> >> >> > <1>; > >> >> >> > + }; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + tcon_top_hdmi_out: port@5 { > >> >> >> > + reg = <5>; > >> >> >> > + > >> >> >> > + tcon_top_hdmi_out_hdmi: > >> >> >> > endpoint { > >> >> >> > + remote-endpoint = > >> >> >> > <&hdmi_in_tcon_top>; + }; > >> >> >> > + }; > >> >> >> > + }; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + tcon_tv0: lcd-controller@1c73000 { > >> >> >> > + compatible = > >> >> >> > "allwinner,sun8i-r40-tcon-tv", > >> >> >> > + > >> >> >> > "allwinner,sun8i-a83t-tcon-tv"; > >> >> >> > + reg = <0x01c73000 0x1000>; > >> >> >> > + interrupts = <GIC_SPI 51 > >> >> >> > IRQ_TYPE_LEVEL_HIGH>; > >> >> >> > + clocks = <&ccu CLK_BUS_TCON_TV0>, > >> >> >> > <&tcon_top > >> >> >> > 0>; > >> >> >> > + clock-names = "ahb", "tcon-ch1"; > >> >> >> > + resets = <&ccu RST_BUS_TCON_TV0>; > >> >> >> > + reset-names = "lcd"; > >> >> >> > + > >> >> >> > + ports { > >> >> >> > + #address-cells = <1>; > >> >> >> > + #size-cells = <0>; > >> >> >> > + > >> >> >> > + tcon_tv0_in: port@0 { > >> >> >> > + reg = <0>; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + tcon_tv0_out: port@1 { > >> >> >> > + reg = <1>; > >> >> >> > + }; > >> >> >> > + }; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + tcon_tv1: lcd-controller@1c74000 { > >> >> >> > + compatible = > >> >> >> > "allwinner,sun8i-r40-tcon-tv", > >> >> >> > + > >> >> >> > "allwinner,sun8i-a83t-tcon-tv"; > >> >> >> > + reg = <0x01c74000 0x1000>; > >> >> >> > + interrupts = <GIC_SPI 52 > >> >> >> > IRQ_TYPE_LEVEL_HIGH>; > >> >> >> > + clocks = <&ccu CLK_BUS_TCON_TV1>, > >> >> >> > <&tcon_top > >> >> >> > 1>; > >> >> >> > + clock-names = "ahb", "tcon-ch1"; > >> >> >> > + resets = <&ccu RST_BUS_TCON_TV1>; > >> >> >> > + reset-names = "lcd"; > >> >> >> > + > >> >> >> > + ports { > >> >> >> > + #address-cells = <1>; > >> >> >> > + #size-cells = <0>; > >> >> >> > + > >> >> >> > + tcon_tv1_in: port@0 { > >> >> >> > + reg = <0>; > >> >> >> > + }; > >> >> >> > + > >> >> >> > + tcon_tv1_out: port@1 { > >> >> >> > + reg = <1>; > >> >> >> > >> >> >> You are missing the remote-endpoints for all the TCON-TOP <-> TCON > >> >> >> connections. Also, on the driver side, there's no code to handle > >> >> >> dynamically mapping mixers to the TCONs that are being used. In the > >> >> >> past > >> >> >> we > >> >> >> had simple 1:1 mappings. This is no longer the case, and it needs > >> >> >> to > >> >> >> be > >> >> >> dealt with. > >> >> > > >> >> > How would TCON TOP driver know how to set muxes? There are no > >> >> > appropriate > >> >> > bingings for muxes, except for V4L2 subsystem, which doesn't really > >> >> > work > >> >> > here. > >> >> > >> >> This will end up being a bunch of custom functions exported from the > >> >> TCON > >> >> TOP driver to the TCON driver. As for bindings, the stuff you already > >> >> have > >> >> is mostly enough. You do have to specify the endpoint ID vs component > >> >> mapping, so you can find the correct one. > >> >> > >> >> For example, you would specify that the IDs for TCON LCDs be 0 and 1, > >> >> and > >> >> TCON TVs be 2 and 3. Matching the actual register values is a nice > >> >> convenience. These would be used by the driver as the TCON ID. > >> > > >> > So something that's already done (minus full connections). > >> > > >> >> Also, we might want to consider them as two pairs of two TCONs (LCD + > >> >> TV). > >> >> The CRTC in DRM land is actually the mixer + TCON on our platform. > >> >> This > >> >> means we only have two CRTCs. So we could have CRTC 0 = mixer 0 + TCON > >> >> LCD > >> >> 0 + TCON TV 0. The "TCON_TVx_OUTSEL" and "DE_PORTx PERH Select" muxes > >> >> would > >> >> be set at run time in the mode set function, selecting either LCD or > >> >> TV > >> >> based on what encoder is attached. > >> > > >> > That proposal would still limit some combinations. For example, that > >> > would > >> > put DSI always on mixer1, since it can be connected to only LCD TCON 1. > >> > It can also cause undesired combination in laptop solutions. Consider > >> > that PCB designer connected LCD1 pins to panel for some reason. Panel > >> > is > >> > definetly main screen and should definetly be connected to mixer0, but > >> > in > >> > that case, it would be to mixer1. > >> > >> There's no reason we can't have dynamically assigned mixer+tcon pairs, > >> but > >> that would mean implementing additional scheduling code that we don't > >> have > >> yet. The current sunxi-drm and CRTC code assume static mappings. > > > > I just remembered that your proposed solution while should work on R40, > > doesn't really fit in H6 case (which is the main reason for this series). > > > > There are only LCD TCON 0 and TV TCON 0. Their HW IDs are the same as on > > R40 (1 and 3). Additionaly, there is also HDMI mux as on R40, although > > there is only one TV TCON, which can be used only for HDMI (TV output is > > connected to LCD TCON through AC200 bridge, put on same die or glued in > > same package, not really sure and doesn't really matter). > > OK. So even there's only one TV TCON, you still have to program all muxes > with the correct value, to prevent a) a bad value left by the bootloader > and b) bad reset default values. > > > I would like to write something which is also going to work for H6 out of > > the box. For H6, following combination would work well: > > mixer0 = LCD TCON 1 + TV TCON 0 > > mixer1 = LCD TCON 0 + TV TCON 1 > > > > Or alternatively, we can leave that to mux callback in TCON which would > > take care for best variant for given SoC. > > I think that is the ultimate goal. However, the muxing would be a bit > complicated. For all the past SoCs, we were dealing with muxing the > downstream encoder. Now we will be muxing mixer and tcon connections > as well. You would also have to dynamically switch around the mixer > and/or tcon pointers in sun4i_crtc so existing code can still work. > > > Once we concur on that, I'll try to implement something. > > > >> We could do this as a second step if you're up to it. > > > > For my ultimate goal, which is 1st class Kodi experience on mainline, > > current proposal works in any case (mixer1 is enough). I just don't like > > solutions which are not universal. > > > >> > Additionaly, since HDMI would became floating between TV TCON 0 and 1, > >> > whoever would write board DT would need to know this and enable only TV > >> > TCON1 if LCD is desired to be connected to mixer0 (or vice versa). > >> > >> There's no reason not to have all TCONs enabled by default. We would > >> consider the display-engine node controlling whether everything actually > >> gets used. > >> > >> > If we really want universal solution with full connections, addtional > >> > property has to be defined and used for that. > >> > > >> >> This limitation is a software one, and should not bleed over into the > >> >> hardware representation. > >> >> > >> >> > Additionaly, how would HDMI know which TCON belongs to it to > >> >> > appropriately > >> >> > set possible_crtcs? > >> >> > >> >> HDMI is connected to the two TCON TVs through the TCON TOP mux. We > >> >> handle > >> >> TCON output muxing in the TCON driver, using the set_mux callback in > >> >> the > >> >> quirks. For R40, this callback would probably call into the TCON TOP > >> >> driver > >> >> asking it to set the mux to some value. > >> >> > >> >> > Currently, my idea is that board DT creates wanted connections. > >> >> > Since > >> >> > there is only one valid connection for each mux, driver knows eactly > >> >> > what > >> >> > to write into mux register. HDMI driver can simply check which TCON > >> >> > connection is valid in HDMI input mux and select it in > >> >> > possible_crtcs. > >> >> > >> >> But that is not how the actual hardware looks like. The device tree > >> >> should > >> >> model the hardware, not a subset of it just because one thinks the > >> >> implementation is difficult or won't be used at all. > >> >> > >> >> Furthermore, I think you have it backwards. possible_crtcs is > >> >> generated > >> >> based on (in our case) the connections between TCON and HDMI based on > >> >> the > >> >> device tree graph. So if you have both hooked up, both will show up in > >> >> possible_crtcs, but only one crtc will actually be selected to feed > >> >> the > >> >> HDMI encoder. If you really need to access the current crtc, the > >> >> drm_encoder struct contains a pointer to it. > >> >> > >> >> In DE 1.0 driver, we leave all the muxing to the TCON driver. See > >> >> > >> >> > >> >> https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/sun4i/s > >> >> un4 > >> >> i_ > >> >> tcon.c#L537 > >> >> > >> >> So in a sense, the HDMI encoder should be and is hooked up to both > >> >> TCONs, > >> >> but only one is active at any given time. > >> > > >> > So something like that I had in v1 series. I'll implement something > >> > similar. That would also mean we need R40 specific TV TCON compatible. > >> > I'll restore that. > >> > > >> > Just a question on future situation when TVE driver will be > >> > implemented. > >> > Suppose that R40 board has TVE0 and HDMI as outputs. This would mean > >> > that > >> > TVE0 has possible crtcs set as 0b01 and HDMI 0b11. Will be DRM > >> > framework > >> > smart enough that it will put HDMI on second crtc because TVE0 can be > >> > connected to only to first crtc? > >> > >> Yes. If the possible_clones setting for the encoder is not set, the DRM > >> framework will not do mirroring, and will keep each active encoder on a > >> separate crtc. > >> > >> >> > Please also note that mixer0 and mixer1 don't have same capabilities > >> >> > and > >> >> > you generally want mixer0 to be connected to main output. This is in > >> >> > contrast to DE1 SoCs, where both backends and both frontends have > >> >> > same > >> >> > capability. > >> >> > >> >> Yes. But who's to say the two display outputs can't be reversed or > >> >> swapped > >> >> around? With fixed singular connections, you also rule out mirrored > >> >> output. > >> > > >> > I don't think there is standard way to swap around mixers at runtime, > >> > expecially if crtcs are represented as mixer + TCON pair. > >> > >> As I mentioned above, we will have to do this on our own. > >> > >> > I'm not sure what do you mean with mirrored output or at least why > >> > singular > >> > connections would prevent mirroring. HW mirroring needs DRM writeback > >> > support which is currently in RFC phase if I'm not mistaken. Once > >> > implemented in DRM framework and in sun4i-drm, it would be possible > >> > only > >> > to mirror mixer0 -> mixer1, because mixer1 doesn't support writeback > >> > (at > >> > least on existing SoCs). > >> > >> What I meant was it might be possible to drive two TCONs with one mixer, > >> or > >> two encoders with one TCON. I guess the latter is not possible since each > >> TCON only has one channel. Not sure about the former. > > > > I think neither of this two variants are possible, because outputs would > > have to have exactly the same resolution and in second case even the same > > pixel clock, which is very unlikely. > > That is what mirroring is supposed to mean, right? For instance you could > have VGA on one and HDMI on the other, at the same resolution and dotclock. Actually, R40 is the first SoC with DE2 where is theoretically possible to connect one mixer to multiple TCONs. I didn't try it yet because BPI M2U has apart from HDMI only DSI connector and TV out on test points and neither have support in mainline. Best regards, Jernej > > As far as I'm concerned, the software doesn't need to have all features > covered. But that doesn't mean the hardware representation can lack > features as well. We already did that once, and now we have some legacy > graph parsing code to handle that. > > Regards > ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Jul 01, 2018 at 09:09:47PM +0200, Jernej Škrabec wrote: > Dne petek, 29. junij 2018 ob 21:06:09 CEST je Jernej Škrabec napisal(a): > > Dne četrtek, 28. junij 2018 ob 20:25:43 CEST je Maxime Ripard napisal(a): > > > On Thu, Jun 28, 2018 at 06:48:50AM +0200, Jernej Škrabec wrote: > > > > Dne četrtek, 28. junij 2018 ob 04:06:52 CEST je Chen-Yu Tsai napisal(a): > > > > > On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec > > > > > <jernej.skrabec@siol.net> > > > > > > > > wrote: > > > > > > Current "old" method to find engine worked pretty well for DE2. > > > > > > However, > > > > > > it doesn't work when TCON TOP is between mixer (engine) and TCON. > > > > > > TCON > > > > > > TOP has multiple input ports, but current engine search algorithm > > > > > > expects only one. > > > > > > > > > > > > This can be fixed by first looking for output port id and selecting > > > > > > matching input by subtracting 1 for the next round. This work even > > > > > > if > > > > > > there is only one input and output. > > > > > > > > > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > > > > > --- > > > > > > > > > > > > drivers/gpu/drm/sun4i/sun4i_tcon.c | 22 ++++++++++++++++++---- > > > > > > 1 file changed, 18 insertions(+), 4 deletions(-) > > > > > > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > b/drivers/gpu/drm/sun4i/sun4i_tcon.c index > > > > > > 08747fc3ee71..264bcc43da11 > > > > > > 100644 > > > > > > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > @@ -791,12 +791,14 @@ static int sun4i_tcon_init_regmap(struct > > > > > > device > > > > > > *dev, > > > > > > > > > > > > */ > > > > > > > > > > > > static struct sunxi_engine * > > > > > > sun4i_tcon_find_engine_traverse(struct sun4i_drv *drv, > > > > > > > > > > > > - struct device_node *node) > > > > > > + struct device_node *node, > > > > > > + u32 port_id) > > > > > > > > > > > > { > > > > > > > > > > > > struct device_node *port, *ep, *remote; > > > > > > struct sunxi_engine *engine = ERR_PTR(-EINVAL); > > > > > > > > > > > > + u32 reg = 0; > > > > > > > > > > > > - port = of_graph_get_port_by_id(node, 0); > > > > > > + port = of_graph_get_port_by_id(node, port_id); > > > > > > > > > > > > if (!port) > > > > > > > > > > > > return ERR_PTR(-EINVAL); > > > > > > > > > > > > @@ -826,8 +828,20 @@ sun4i_tcon_find_engine_traverse(struct > > > > > > sun4i_drv > > > > > > *drv, > > > > > > > > > > > > if (remote == engine->node) > > > > > > > > > > > > goto out_put_remote; > > > > > > > > > > > > + /* > > > > > > + * According to device tree binding input ports have even id > > > > > > + * number and output ports have odd id. Since component with > > > > > > + * more than one input and one output (TCON TOP) exits, > > > > > > correct > > > > > > + * remote input id has to be calculated by subtracting 1 > > > > > > from > > > > > > + * remote output id. If this for some reason can't be done, > > > > > > 0 > > > > > > + * is used as input port id. > > > > > > + */ > > > > > > > > > > You need to call > > > > > > > > > > of_node_put(port); > > > > > > > > > > to drop the reference to the original port. > > > > > > > > Thanks for noticing it. I guess I should send fix patch, since patches > > > > from > > > > drm-misc-next can't be dropped. > > > > > > Yeah, please send additional patches for all the issues pointed out by > > > Chen-Yu. > > > > Of course. I hope this can be resolved till the end of the next week. After > > that, I will be away from PC for 2 weeks. Feel free to drop DT patches if > > you think that it will come too close to merge window. > > Actually, can you drop it anyway? It needs a lot of changes and keeping HDMI > working would need some effort. No, we can't drop it, unfortunately. Maxime
Dne nedelja, 01. julij 2018 ob 21:25:57 CEST je Jernej Škrabec napisal(a): > Dne nedelja, 01. julij 2018 ob 17:35:28 CEST je Chen-Yu Tsai napisal(a): > > On Sun, Jul 1, 2018 at 11:13 PM, Jernej Škrabec <jernej.skrabec@siol.net> > > wrote: > > > Dne nedelja, 01. julij 2018 ob 15:52:55 CEST je Chen-Yu Tsai napisal(a): > > >> On Sun, Jul 1, 2018 at 6:41 PM, Jernej Škrabec > > >> <jernej.skrabec@siol.net> > > > > > > wrote: > > >> > Dne četrtek, 28. junij 2018 ob 08:51:07 CEST je Chen-Yu Tsai > > napisal(a): > > >> >> On Thu, Jun 28, 2018 at 1:15 PM, Jernej Škrabec > > >> >> <jernej.skrabec@siol.net> > > >> > > > >> > wrote: > > >> >> > Dne četrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai > > > > > > napisal(a): > > >> >> >> On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec > > >> >> >> <jernej.skrabec@siol.net> > > >> >> > > > >> >> > wrote: > > >> >> >> > Add all entries needed for HDMI to function properly. > > >> >> >> > > > >> >> >> > Since R40 has highly configurable pipeline, both mixers and > > >> >> >> > both > > >> >> >> > TCON > > >> >> >> > TVs are added. Board specific DT should then connect them > > >> >> >> > together > > >> >> >> > trough TCON TOP muxers to best fit the purpose of the board. > > >> >> >> > > > >> >> >> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > >> >> >> > --- > > >> >> >> > > > >> >> >> > arch/arm/boot/dts/sun8i-r40.dtsi | 269 > > >> >> >> > +++++++++++++++++++++++++++++++ > > >> >> >> > 1 file changed, 269 insertions(+) > > >> >> >> > > > >> >> >> > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi > > >> >> >> > b/arch/arm/boot/dts/sun8i-r40.dtsi index > > >> >> >> > 173dcc1652d2..a2a75fb04caf > > >> >> >> > 100644 > > >> >> >> > --- a/arch/arm/boot/dts/sun8i-r40.dtsi > > >> >> >> > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi > > >> >> >> > @@ -42,8 +42,11 @@ > > >> >> >> > > > >> >> >> > */ > > >> >> >> > > > >> >> >> > #include <dt-bindings/interrupt-controller/arm-gic.h> > > >> >> >> > > > >> >> >> > +#include <dt-bindings/clock/sun8i-de2.h> > > >> >> >> > > > >> >> >> > #include <dt-bindings/clock/sun8i-r40-ccu.h> > > >> >> >> > > > >> >> >> > +#include <dt-bindings/clock/sun8i-tcon-top.h> > > >> >> > > > >> >> > Maxime, above line breaks compilation for build robot, sorry. > > >> >> > > > >> >> >> > #include <dt-bindings/reset/sun8i-r40-ccu.h> > > >> >> >> > > > >> >> >> > +#include <dt-bindings/reset/sun8i-de2.h> > > >> >> >> > > > >> >> >> > / { > > >> >> >> > > > >> >> >> > #address-cells = <1>; > > >> >> >> > > > >> >> >> > @@ -99,12 +102,76 @@ > > >> >> >> > > > >> >> >> > }; > > >> >> >> > > > >> >> >> > }; > > >> >> >> > > > >> >> >> > + de: display-engine { > > >> >> >> > + compatible = > > >> >> >> > "allwinner,sun8i-r40-display-engine", > > >> >> >> > + > > >> >> >> > "allwinner,sun8i-h3-display-engine"; > > >> >> >> > > >> >> >> Given that the display pipeline looks different, they should not > > >> >> >> be > > >> >> >> compatible. > > >> >> > > > >> >> > Ok. > > >> >> > > > >> >> >> > + allwinner,pipelines = <&mixer0>, <&mixer1>; > > >> >> >> > + status = "disabled"; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > > > >> >> >> > soc { > > >> >> >> > > > >> >> >> > compatible = "simple-bus"; > > >> >> >> > #address-cells = <1>; > > >> >> >> > #size-cells = <1>; > > >> >> >> > ranges; > > >> >> >> > > > >> >> >> > + display_clocks: clock@1000000 { > > >> >> >> > + compatible = > > >> >> >> > "allwinner,sun8i-r40-de2-clk", > > >> >> >> > + > > >> >> >> > "allwinner,sun8i-h3-de2-clk"; > > >> >> >> > + reg = <0x01000000 0x100000>; > > >> >> >> > + clocks = <&ccu CLK_DE>, > > >> >> >> > + <&ccu CLK_BUS_DE>; > > >> >> >> > + clock-names = "mod", > > >> >> >> > + "bus"; > > >> >> >> > + resets = <&ccu RST_BUS_DE>; > > >> >> >> > + #clock-cells = <1>; > > >> >> >> > + #reset-cells = <1>; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + mixer0: mixer@1100000 { > > >> >> >> > + compatible = > > >> >> >> > "allwinner,sun8i-r40-de2-mixer-0"; > > >> >> >> > + reg = <0x01100000 0x100000>; > > >> >> >> > + clocks = <&display_clocks > > >> >> >> > CLK_BUS_MIXER0>, > > >> >> >> > + <&display_clocks CLK_MIXER0>; > > >> >> >> > + clock-names = "bus", > > >> >> >> > + "mod"; > > >> >> >> > + resets = <&display_clocks RST_MIXER0>; > > >> >> >> > + > > >> >> >> > + ports { > > >> >> >> > + #address-cells = <1>; > > >> >> >> > + #size-cells = <0>; > > >> >> >> > + > > >> >> >> > + mixer0_out: port@1 { > > >> >> >> > + reg = <1>; > > >> >> >> > + mixer0_out_tcon_top: > > >> >> >> > endpoint { > > >> >> >> > + remote-endpoint > > >> >> >> > = > > >> >> >> > <&tcon_top_mixer0_in_mixer0>; + > > >> >> >> > }; > > >> >> >> > + }; > > >> >> >> > + }; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + mixer1: mixer@1200000 { > > >> >> >> > + compatible = > > >> >> >> > "allwinner,sun8i-r40-de2-mixer-1"; > > >> >> >> > + reg = <0x01200000 0x100000>; > > >> >> >> > + clocks = <&display_clocks > > >> >> >> > CLK_BUS_MIXER1>, > > >> >> >> > + <&display_clocks CLK_MIXER1>; > > >> >> >> > + clock-names = "bus", > > >> >> >> > + "mod"; > > >> >> >> > + resets = <&display_clocks RST_WB>; > > >> >> >> > + > > >> >> >> > + ports { > > >> >> >> > + #address-cells = <1>; > > >> >> >> > + #size-cells = <0>; > > >> >> >> > + > > >> >> >> > + mixer1_out: port@1 { > > >> >> >> > + reg = <1>; > > >> >> >> > + mixer1_out_tcon_top: > > >> >> >> > endpoint { > > >> >> >> > + remote-endpoint > > >> >> >> > = > > >> >> >> > <&tcon_top_mixer1_in_mixer1>; + > > >> >> >> > }; > > >> >> >> > + }; > > >> >> >> > + }; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > > > >> >> >> > nmi_intc: interrupt-controller@1c00030 { > > >> >> >> > > > >> >> >> > compatible = > > >> >> >> > "allwinner,sun7i-a20-sc-nmi"; > > >> >> >> > interrupt-controller; > > >> >> >> > > > >> >> >> > @@ -451,6 +518,163 @@ > > >> >> >> > > > >> >> >> > #size-cells = <0>; > > >> >> >> > > > >> >> >> > }; > > >> >> >> > > > >> >> >> > + tcon_top: tcon-top@1c70000 { > > >> >> >> > + compatible = > > >> >> >> > "allwinner,sun8i-r40-tcon-top"; > > >> >> >> > + reg = <0x01c70000 0x1000>; > > >> >> >> > + clocks = <&ccu CLK_BUS_TCON_TOP>, > > >> >> >> > + <&ccu CLK_TCON_TV0>, > > >> >> >> > + <&ccu CLK_TVE0>, > > >> >> >> > + <&ccu CLK_TCON_TV1>, > > >> >> >> > + <&ccu CLK_TVE1>, > > >> >> >> > + <&ccu CLK_DSI_DPHY>; > > >> >> >> > + clock-names = "bus", > > >> >> >> > + "tcon-tv0", > > >> >> >> > + "tve0", > > >> >> >> > + "tcon-tv1", > > >> >> >> > + "tve1", > > >> >> >> > + "dsi"; > > >> >> >> > + clock-output-names = "tcon-top-tv0", > > >> >> >> > + "tcon-top-tv1", > > >> >> >> > + "tcon-top-dsi"; > > >> >> >> > + resets = <&ccu RST_BUS_TCON_TOP>; > > >> >> >> > + #clock-cells = <1>; > > >> >> >> > + > > >> >> >> > + ports { > > >> >> >> > + #address-cells = <1>; > > >> >> >> > + #size-cells = <0>; > > >> >> >> > + > > >> >> >> > + tcon_top_mixer0_in: port@0 { > > >> >> >> > + reg = <0>; > > >> >> >> > + > > >> >> >> > + > > >> >> >> > tcon_top_mixer0_in_mixer0: > > >> >> >> > endpoint { + > > >> >> >> > remote-endpoint = <&mixer0_out_tcon_top>; + > > >> >> >> > > > >> >> >> > }; > > >> >> >> > > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + tcon_top_mixer0_out: port@1 { > > >> >> >> > + #address-cells = <1>; > > >> >> >> > + #size-cells = <0>; > > >> >> >> > + reg = <1>; > > >> >> >> > + > > >> >> >> > + > > >> >> >> > tcon_top_mixer0_out_tcon_lcd0: > > >> >> >> > endpoint@0 { + > > >> >> >> > reg > > >> >> >> > = > > >> >> >> > <0>; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + > > >> >> >> > tcon_top_mixer0_out_tcon_lcd1: > > >> >> >> > endpoint@1 { + > > >> >> >> > reg > > >> >> >> > = > > >> >> >> > <1>; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + > > >> >> >> > tcon_top_mixer0_out_tcon_tv0: > > >> >> >> > endpoint@2 { + > > >> >> >> > reg > > >> >> >> > = > > >> >> >> > <2>; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + > > >> >> >> > tcon_top_mixer0_out_tcon_tv1: > > >> >> >> > endpoint@3 { + > > >> >> >> > reg > > >> >> >> > = > > >> >> >> > <3>; > > >> >> >> > + }; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + tcon_top_mixer1_in: port@2 { > > >> >> >> > + reg = <2>; > > >> >> >> > + > > >> >> >> > + > > >> >> >> > tcon_top_mixer1_in_mixer1: > > >> >> >> > endpoint { + > > >> >> >> > remote-endpoint = <&mixer1_out_tcon_top>; + > > >> >> >> > > > >> >> >> > }; > > >> >> >> > > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + tcon_top_mixer1_out: port@3 { > > >> >> >> > + #address-cells = <1>; > > >> >> >> > + #size-cells = <0>; > > >> >> >> > + reg = <3>; > > >> >> >> > + > > >> >> >> > + > > >> >> >> > tcon_top_mixer1_out_tcon_lcd0: > > >> >> >> > endpoint@0 { + > > >> >> >> > reg > > >> >> >> > = > > >> >> >> > <0>; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + > > >> >> >> > tcon_top_mixer1_out_tcon_lcd1: > > >> >> >> > endpoint@1 { + > > >> >> >> > reg > > >> >> >> > = > > >> >> >> > <1>; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + > > >> >> >> > tcon_top_mixer1_out_tcon_tv0: > > >> >> >> > endpoint@2 { + > > >> >> >> > reg > > >> >> >> > = > > >> >> >> > <2>; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + > > >> >> >> > tcon_top_mixer1_out_tcon_tv1: > > >> >> >> > endpoint@3 { + > > >> >> >> > reg > > >> >> >> > = > > >> >> >> > <3>; > > >> >> >> > + }; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + tcon_top_hdmi_in: port@4 { > > >> >> >> > + #address-cells = <1>; > > >> >> >> > + #size-cells = <0>; > > >> >> >> > + reg = <4>; > > >> >> >> > + > > >> >> >> > + > > >> >> >> > tcon_top_hdmi_in_tcon_tv0: > > >> >> >> > endpoint@0 { + > > >> >> >> > reg > > >> >> >> > = > > >> >> >> > <0>; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + > > >> >> >> > tcon_top_hdmi_in_tcon_tv1: > > >> >> >> > endpoint@1 { + > > >> >> >> > reg > > >> >> >> > = > > >> >> >> > <1>; > > >> >> >> > + }; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + tcon_top_hdmi_out: port@5 { > > >> >> >> > + reg = <5>; > > >> >> >> > + > > >> >> >> > + tcon_top_hdmi_out_hdmi: > > >> >> >> > endpoint { > > >> >> >> > + remote-endpoint > > >> >> >> > = > > >> >> >> > <&hdmi_in_tcon_top>; + }; > > >> >> >> > + }; > > >> >> >> > + }; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + tcon_tv0: lcd-controller@1c73000 { > > >> >> >> > + compatible = > > >> >> >> > "allwinner,sun8i-r40-tcon-tv", > > >> >> >> > + > > >> >> >> > "allwinner,sun8i-a83t-tcon-tv"; > > >> >> >> > + reg = <0x01c73000 0x1000>; > > >> >> >> > + interrupts = <GIC_SPI 51 > > >> >> >> > IRQ_TYPE_LEVEL_HIGH>; > > >> >> >> > + clocks = <&ccu CLK_BUS_TCON_TV0>, > > >> >> >> > <&tcon_top > > >> >> >> > 0>; > > >> >> >> > + clock-names = "ahb", "tcon-ch1"; > > >> >> >> > + resets = <&ccu RST_BUS_TCON_TV0>; > > >> >> >> > + reset-names = "lcd"; > > >> >> >> > + > > >> >> >> > + ports { > > >> >> >> > + #address-cells = <1>; > > >> >> >> > + #size-cells = <0>; > > >> >> >> > + > > >> >> >> > + tcon_tv0_in: port@0 { > > >> >> >> > + reg = <0>; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + tcon_tv0_out: port@1 { > > >> >> >> > + reg = <1>; > > >> >> >> > + }; > > >> >> >> > + }; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + tcon_tv1: lcd-controller@1c74000 { > > >> >> >> > + compatible = > > >> >> >> > "allwinner,sun8i-r40-tcon-tv", > > >> >> >> > + > > >> >> >> > "allwinner,sun8i-a83t-tcon-tv"; > > >> >> >> > + reg = <0x01c74000 0x1000>; > > >> >> >> > + interrupts = <GIC_SPI 52 > > >> >> >> > IRQ_TYPE_LEVEL_HIGH>; > > >> >> >> > + clocks = <&ccu CLK_BUS_TCON_TV1>, > > >> >> >> > <&tcon_top > > >> >> >> > 1>; > > >> >> >> > + clock-names = "ahb", "tcon-ch1"; > > >> >> >> > + resets = <&ccu RST_BUS_TCON_TV1>; > > >> >> >> > + reset-names = "lcd"; > > >> >> >> > + > > >> >> >> > + ports { > > >> >> >> > + #address-cells = <1>; > > >> >> >> > + #size-cells = <0>; > > >> >> >> > + > > >> >> >> > + tcon_tv1_in: port@0 { > > >> >> >> > + reg = <0>; > > >> >> >> > + }; > > >> >> >> > + > > >> >> >> > + tcon_tv1_out: port@1 { > > >> >> >> > + reg = <1>; > > >> >> >> > > >> >> >> You are missing the remote-endpoints for all the TCON-TOP <-> > > >> >> >> TCON > > >> >> >> connections. Also, on the driver side, there's no code to handle > > >> >> >> dynamically mapping mixers to the TCONs that are being used. In > > >> >> >> the > > >> >> >> past > > >> >> >> we > > >> >> >> had simple 1:1 mappings. This is no longer the case, and it needs > > >> >> >> to > > >> >> >> be > > >> >> >> dealt with. > > >> >> > > > >> >> > How would TCON TOP driver know how to set muxes? There are no > > >> >> > appropriate > > >> >> > bingings for muxes, except for V4L2 subsystem, which doesn't > > >> >> > really > > >> >> > work > > >> >> > here. > > >> >> > > >> >> This will end up being a bunch of custom functions exported from the > > >> >> TCON > > >> >> TOP driver to the TCON driver. As for bindings, the stuff you > > >> >> already > > >> >> have > > >> >> is mostly enough. You do have to specify the endpoint ID vs > > >> >> component > > >> >> mapping, so you can find the correct one. > > >> >> > > >> >> For example, you would specify that the IDs for TCON LCDs be 0 and > > >> >> 1, > > >> >> and > > >> >> TCON TVs be 2 and 3. Matching the actual register values is a nice > > >> >> convenience. These would be used by the driver as the TCON ID. > > >> > > > >> > So something that's already done (minus full connections). > > >> > > > >> >> Also, we might want to consider them as two pairs of two TCONs (LCD > > >> >> + > > >> >> TV). > > >> >> The CRTC in DRM land is actually the mixer + TCON on our platform. > > >> >> This > > >> >> means we only have two CRTCs. So we could have CRTC 0 = mixer 0 + > > >> >> TCON > > >> >> LCD > > >> >> 0 + TCON TV 0. The "TCON_TVx_OUTSEL" and "DE_PORTx PERH Select" > > >> >> muxes > > >> >> would > > >> >> be set at run time in the mode set function, selecting either LCD or > > >> >> TV > > >> >> based on what encoder is attached. Any suggestion how to expand sun4i_tcon_find_engine() to match TCON with mixer? Now we have mixer 0 and 1, with TCONs 2 and 3. This means that simple id matching like this: https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/sun4i/ sun4i_tcon.c#L865 doesn't work anymore. As we discussed already, this is also a bit SoC specific. Should I add new quirk, which would match mixer id with TCON id with the SoC specific helper? This has to be done at probe time, which means it can't be done in mux callback as though earlier. > > >> > > > >> > That proposal would still limit some combinations. For example, that > > >> > would > > >> > put DSI always on mixer1, since it can be connected to only LCD TCON > > >> > 1. > > >> > It can also cause undesired combination in laptop solutions. Consider > > >> > that PCB designer connected LCD1 pins to panel for some reason. Panel > > >> > is > > >> > definetly main screen and should definetly be connected to mixer0, > > >> > but > > >> > in > > >> > that case, it would be to mixer1. > > >> > > >> There's no reason we can't have dynamically assigned mixer+tcon pairs, > > >> but > > >> that would mean implementing additional scheduling code that we don't > > >> have > > >> yet. The current sunxi-drm and CRTC code assume static mappings. > > > > > > I just remembered that your proposed solution while should work on R40, > > > doesn't really fit in H6 case (which is the main reason for this > > > series). > > > > > > There are only LCD TCON 0 and TV TCON 0. Their HW IDs are the same as on > > > R40 (1 and 3). Additionaly, there is also HDMI mux as on R40, although > > > there is only one TV TCON, which can be used only for HDMI (TV output is > > > connected to LCD TCON through AC200 bridge, put on same die or glued in > > > same package, not really sure and doesn't really matter). > > > > OK. So even there's only one TV TCON, you still have to program all muxes > > with the correct value, to prevent a) a bad value left by the bootloader > > and b) bad reset default values. > > > > > I would like to write something which is also going to work for H6 out > > > of > > > the box. For H6, following combination would work well: > > > mixer0 = LCD TCON 1 + TV TCON 0 > > > mixer1 = LCD TCON 0 + TV TCON 1 > > > > > > Or alternatively, we can leave that to mux callback in TCON which would > > > take care for best variant for given SoC. > > > > I think that is the ultimate goal. However, the muxing would be a bit > > complicated. For all the past SoCs, we were dealing with muxing the > > downstream encoder. Now we will be muxing mixer and tcon connections > > as well. You would also have to dynamically switch around the mixer > > and/or tcon pointers in sun4i_crtc so existing code can still work. > > > > > Once we concur on that, I'll try to implement something. > > > > > >> We could do this as a second step if you're up to it. > > > > > > For my ultimate goal, which is 1st class Kodi experience on mainline, > > > current proposal works in any case (mixer1 is enough). I just don't like > > > solutions which are not universal. > > > > > >> > Additionaly, since HDMI would became floating between TV TCON 0 and > > >> > 1, > > >> > whoever would write board DT would need to know this and enable only > > >> > TV > > >> > TCON1 if LCD is desired to be connected to mixer0 (or vice versa). > > >> > > >> There's no reason not to have all TCONs enabled by default. We would > > >> consider the display-engine node controlling whether everything > > >> actually > > >> gets used. > > >> > > >> > If we really want universal solution with full connections, addtional > > >> > property has to be defined and used for that. > > >> > > > >> >> This limitation is a software one, and should not bleed over into > > >> >> the > > >> >> hardware representation. > > >> >> > > >> >> > Additionaly, how would HDMI know which TCON belongs to it to > > >> >> > appropriately > > >> >> > set possible_crtcs? > > >> >> > > >> >> HDMI is connected to the two TCON TVs through the TCON TOP mux. We > > >> >> handle > > >> >> TCON output muxing in the TCON driver, using the set_mux callback in > > >> >> the > > >> >> quirks. For R40, this callback would probably call into the TCON TOP > > >> >> driver > > >> >> asking it to set the mux to some value. > > >> >> > > >> >> > Currently, my idea is that board DT creates wanted connections. > > >> >> > Since > > >> >> > there is only one valid connection for each mux, driver knows > > >> >> > eactly > > >> >> > what > > >> >> > to write into mux register. HDMI driver can simply check which > > >> >> > TCON > > >> >> > connection is valid in HDMI input mux and select it in > > >> >> > possible_crtcs. > > >> >> > > >> >> But that is not how the actual hardware looks like. The device tree > > >> >> should > > >> >> model the hardware, not a subset of it just because one thinks the > > >> >> implementation is difficult or won't be used at all. > > >> >> > > >> >> Furthermore, I think you have it backwards. possible_crtcs is > > >> >> generated > > >> >> based on (in our case) the connections between TCON and HDMI based > > >> >> on > > >> >> the > > >> >> device tree graph. So if you have both hooked up, both will show up > > >> >> in > > >> >> possible_crtcs, but only one crtc will actually be selected to feed > > >> >> the > > >> >> HDMI encoder. If you really need to access the current crtc, the > > >> >> drm_encoder struct contains a pointer to it. > > >> >> > > >> >> In DE 1.0 driver, we leave all the muxing to the TCON driver. See > > >> >> > > >> >> > > >> >> https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/sun4i > > >> >> /s > > >> >> un4 > > >> >> i_ > > >> >> tcon.c#L537 > > >> >> > > >> >> So in a sense, the HDMI encoder should be and is hooked up to both > > >> >> TCONs, > > >> >> but only one is active at any given time. > > >> > > > >> > So something like that I had in v1 series. I'll implement something > > >> > similar. That would also mean we need R40 specific TV TCON > > >> > compatible. > > >> > I'll restore that. > > >> > > > >> > Just a question on future situation when TVE driver will be > > >> > implemented. > > >> > Suppose that R40 board has TVE0 and HDMI as outputs. This would mean > > >> > that > > >> > TVE0 has possible crtcs set as 0b01 and HDMI 0b11. Will be DRM > > >> > framework > > >> > smart enough that it will put HDMI on second crtc because TVE0 can be > > >> > connected to only to first crtc? > > >> > > >> Yes. If the possible_clones setting for the encoder is not set, the DRM > > >> framework will not do mirroring, and will keep each active encoder on a > > >> separate crtc. > > >> > > >> >> > Please also note that mixer0 and mixer1 don't have same > > >> >> > capabilities > > >> >> > and > > >> >> > you generally want mixer0 to be connected to main output. This is > > >> >> > in > > >> >> > contrast to DE1 SoCs, where both backends and both frontends have > > >> >> > same > > >> >> > capability. > > >> >> > > >> >> Yes. But who's to say the two display outputs can't be reversed or > > >> >> swapped > > >> >> around? With fixed singular connections, you also rule out mirrored > > >> >> output. > > >> > > > >> > I don't think there is standard way to swap around mixers at runtime, > > >> > expecially if crtcs are represented as mixer + TCON pair. > > >> > > >> As I mentioned above, we will have to do this on our own. > > >> > > >> > I'm not sure what do you mean with mirrored output or at least why > > >> > singular > > >> > connections would prevent mirroring. HW mirroring needs DRM writeback > > >> > support which is currently in RFC phase if I'm not mistaken. Once > > >> > implemented in DRM framework and in sun4i-drm, it would be possible > > >> > only > > >> > to mirror mixer0 -> mixer1, because mixer1 doesn't support writeback > > >> > (at > > >> > least on existing SoCs). > > >> > > >> What I meant was it might be possible to drive two TCONs with one > > >> mixer, > > >> or > > >> two encoders with one TCON. I guess the latter is not possible since > > >> each > > >> TCON only has one channel. Not sure about the former. > > > > > > I think neither of this two variants are possible, because outputs would > > > have to have exactly the same resolution and in second case even the > > > same > > > pixel clock, which is very unlikely. > > > > That is what mirroring is supposed to mean, right? For instance you could > > have VGA on one and HDMI on the other, at the same resolution and > > dotclock. > > Actually, R40 is the first SoC with DE2 where is theoretically possible to > connect one mixer to multiple TCONs. I didn't try it yet because BPI M2U has > apart from HDMI only DSI connector and TV out on test points and neither > have support in mainline. Sorry, I spoke too soon. Actually it's not possible to do that even on R40. So both variants are not possible with current DE2/DE3 SoCs, unless there is something undocumented. Best regards, Jernej > > > As far as I'm concerned, the software doesn't need to have all features > > covered. But that doesn't mean the hardware representation can lack > > features as well. We already did that once, and now we have some legacy > > graph parsing code to handle that. > > > > Regards > > ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Jul 01, 2018 at 11:11:06PM +0800, Chen-Yu Tsai wrote: > On Sun, Jul 1, 2018 at 4:27 PM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > > Dne četrtek, 28. junij 2018 ob 08:24:34 CEST je Chen-Yu Tsai napisal(a): > >> On Thu, Jun 28, 2018 at 12:45 PM, Jernej Škrabec > >> > >> <jernej.skrabec@siol.net> wrote: > >> > Dne četrtek, 28. junij 2018 ob 03:51:31 CEST je Chen-Yu Tsai napisal(a): > >> >> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> > >> > > >> > wrote: > >> >> > TV TCONs (channel 1 only) are always connected to TV or HDMI encoder. > >> >> > Because of that, all output endpoints on such TCON node will point to a > >> >> > encoder which is part of component framework. > >> >> > > >> >> > Correct current graph traversing algorithm in such way that it doesn't > >> >> > skip output enpoints with id 0 on TV TCONs. > >> >> > >> >> No. Our bindings say that endpoint 0 _is_ channel 0. For TCONs that don't > >> >> have channel 0, it must be skipped. > >> > > >> > I'm not sure where this is stated. I read TCON binding again. Can you > >> > please point me to it? > >> > >> https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bind > >> ings/display/sunxi/sun4i-drm.txt#L169 > >> > >> Our TCON driver still expects RGB or LVDS panel / bridges on endpoint 0. > > > > Yes, but that can only happen on TCON which has channel 0. TV TCONs (those > > with channel 1 only) can't have panels or bridges connected to them, because > > they are internally always connected to either HDMI or TV encoder or both. > > Actually, R40 is the only SoC, where same TV TCON can be connected to TV > > encoder or HDMI. Others have specialized TV TCONs, which are connect to only > > one encoder. > > > > IMO TV TCONs are really just stripped down LCD TCONs to support one (or max > > two) specific encoder. > > I agree. We've seen these first in the H3, and the reverse, TCONs only with > LCD, on the A23/A33. > > >> So I guess this was sort of implied historically. It's no longer true. > >> This is something we should probably fix. > > > > Fixed in what way? You mean update bindings to mention that TCON output > > endpoint 0 is reserved for panels or bridges? > > Either that, or have the drm driver look at other endpoints. I guess we > should ask Maxime if this is already done or not, since the DSI driver > isn't endpoint 0 in the A33 dtsi. The DSI driver isn't really a good example for this, since the panel isn't described as part of the OF graph, but DSI binding require that it's a child of the DSI controller node. > >> > >> In practice our drivers don't look at it (yet), but rely on the downstream > >> encoder type to determine which channel to use. > >> > >> But please add the "allwinner,tcon-channel" property as specified in > >> the binding. > > > > It's my understanding of TCON binding documentation that property > > "allwinner,tcon-channel" is needed only if TCON supports both channels. TV > > TCON clearly supports only channel 1. In that case, there is no doubt to which > > channel output endpoint belongs. > > > > If that's not true, dt bindings documentation should be reworded to contain > > word "needed" or something similar. Currently, no DT for newer SoC contains > > that property (for example, A83T, H3, H5 or even A33). Yeah, but that's mainly because we have a single output enabled for each channel on those newer SoCs. When / if we enable the RGB and LVDS output for example, we will have to set this. > > On A33 this is even more interesting, since tcon0 has only channel > > 0 and has DSI output endpoint with number 1. According to TCON > > binding docs, if "allwinner,tcon-channel" is not preset, endpoint > > number represent channel. So, that would mean DSI needs channel 1 > > on tcon which supports clearly only channel 0. So either there > > TCON bindings documentation needs updates or DT for A33 has to be > > updated. > > Maxime? You did the A33 DSI stuff. I guess it's missing on the A33 DSI endpoint. Maxime
Dne četrtek, 05. julij 2018 ob 09:03:58 CEST je Maxime Ripard napisal(a): > On Sun, Jul 01, 2018 at 11:11:06PM +0800, Chen-Yu Tsai wrote: > > On Sun, Jul 1, 2018 at 4:27 PM, Jernej Škrabec <jernej.skrabec@siol.net> wrote: > > > Dne četrtek, 28. junij 2018 ob 08:24:34 CEST je Chen-Yu Tsai napisal(a): > > >> On Thu, Jun 28, 2018 at 12:45 PM, Jernej Škrabec > > >> > > >> <jernej.skrabec@siol.net> wrote: > > >> > Dne četrtek, 28. junij 2018 ob 03:51:31 CEST je Chen-Yu Tsai napisal(a): > > >> >> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec > > >> >> <jernej.skrabec@siol.net> > > >> > > > >> > wrote: > > >> >> > TV TCONs (channel 1 only) are always connected to TV or HDMI > > >> >> > encoder. > > >> >> > Because of that, all output endpoints on such TCON node will point > > >> >> > to a > > >> >> > encoder which is part of component framework. > > >> >> > > > >> >> > Correct current graph traversing algorithm in such way that it > > >> >> > doesn't > > >> >> > skip output enpoints with id 0 on TV TCONs. > > >> >> > > >> >> No. Our bindings say that endpoint 0 _is_ channel 0. For TCONs that > > >> >> don't > > >> >> have channel 0, it must be skipped. > > >> > > > >> > I'm not sure where this is stated. I read TCON binding again. Can you > > >> > please point me to it? > > >> > > >> https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree > > >> /bind ings/display/sunxi/sun4i-drm.txt#L169 > > >> > > >> Our TCON driver still expects RGB or LVDS panel / bridges on endpoint > > >> 0. > > > > > > Yes, but that can only happen on TCON which has channel 0. TV TCONs > > > (those > > > with channel 1 only) can't have panels or bridges connected to them, > > > because they are internally always connected to either HDMI or TV > > > encoder or both. Actually, R40 is the only SoC, where same TV TCON can > > > be connected to TV encoder or HDMI. Others have specialized TV TCONs, > > > which are connect to only one encoder. > > > > > > IMO TV TCONs are really just stripped down LCD TCONs to support one (or > > > max > > > two) specific encoder. > > > > I agree. We've seen these first in the H3, and the reverse, TCONs only > > with > > LCD, on the A23/A33. > > > > >> So I guess this was sort of implied historically. It's no longer true. > > >> This is something we should probably fix. > > > > > > Fixed in what way? You mean update bindings to mention that TCON output > > > endpoint 0 is reserved for panels or bridges? > > > > Either that, or have the drm driver look at other endpoints. I guess we > > should ask Maxime if this is already done or not, since the DSI driver > > isn't endpoint 0 in the A33 dtsi. > > The DSI driver isn't really a good example for this, since the panel > isn't described as part of the OF graph, but DSI binding require that > it's a child of the DSI controller node. So should be new behaviour reverted? I mean ignoring endpoint 0 on TV TCONs. For me, it doesn't make sense to check for panel or bridges on TV TCONs, because they are never exposed on physical pins. They are always connected to TVE or HDMI encoder internally. > > > >> In practice our drivers don't look at it (yet), but rely on the > > >> downstream > > >> encoder type to determine which channel to use. > > >> > > >> But please add the "allwinner,tcon-channel" property as specified in > > >> the binding. > > > > > > It's my understanding of TCON binding documentation that property > > > "allwinner,tcon-channel" is needed only if TCON supports both channels. > > > TV > > > TCON clearly supports only channel 1. In that case, there is no doubt to > > > which channel output endpoint belongs. > > > > > > If that's not true, dt bindings documentation should be reworded to > > > contain > > > word "needed" or something similar. Currently, no DT for newer SoC > > > contains > > > that property (for example, A83T, H3, H5 or even A33). > > Yeah, but that's mainly because we have a single output enabled for > each channel on those newer SoCs. When / if we enable the RGB and LVDS > output for example, we will have to set this. So just to be clear, before I send follow up series, I have to add "allwinner,tcon-channel" property to DT, because both TV TCONs can be connected to either TVE or HDMI (trough TCON TOP)? BTW, since this property is not used at all in the code, why not just simply deprecate it and remove it from existing DTs? I noticed this is standard practice for obsolete properties. Best regards, Jernej > > > > On A33 this is even more interesting, since tcon0 has only channel > > > 0 and has DSI output endpoint with number 1. According to TCON > > > binding docs, if "allwinner,tcon-channel" is not preset, endpoint > > > number represent channel. So, that would mean DSI needs channel 1 > > > on tcon which supports clearly only channel 0. So either there > > > TCON bindings documentation needs updates or DT for A33 has to be > > > updated. > > > > Maxime? You did the A33 DSI stuff. > > I guess it's missing on the A33 DSI endpoint. > > Maxime -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jul 05, 2018 at 10:03:35PM +0200, Jernej Škrabec wrote: > Dne četrtek, 05. julij 2018 ob 09:03:58 CEST je Maxime Ripard napisal(a): > > On Sun, Jul 01, 2018 at 11:11:06PM +0800, Chen-Yu Tsai wrote: > > > On Sun, Jul 1, 2018 at 4:27 PM, Jernej Škrabec <jernej.skrabec@siol.net> > wrote: > > > > Dne četrtek, 28. junij 2018 ob 08:24:34 CEST je Chen-Yu Tsai napisal(a): > > > >> On Thu, Jun 28, 2018 at 12:45 PM, Jernej Škrabec > > > >> > > > >> <jernej.skrabec@siol.net> wrote: > > > >> > Dne četrtek, 28. junij 2018 ob 03:51:31 CEST je Chen-Yu Tsai > napisal(a): > > > >> >> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec > > > >> >> <jernej.skrabec@siol.net> > > > >> > > > > >> > wrote: > > > >> >> > TV TCONs (channel 1 only) are always connected to TV or HDMI > > > >> >> > encoder. > > > >> >> > Because of that, all output endpoints on such TCON node will point > > > >> >> > to a > > > >> >> > encoder which is part of component framework. > > > >> >> > > > > >> >> > Correct current graph traversing algorithm in such way that it > > > >> >> > doesn't > > > >> >> > skip output enpoints with id 0 on TV TCONs. > > > >> >> > > > >> >> No. Our bindings say that endpoint 0 _is_ channel 0. For TCONs that > > > >> >> don't > > > >> >> have channel 0, it must be skipped. > > > >> > > > > >> > I'm not sure where this is stated. I read TCON binding again. Can you > > > >> > please point me to it? > > > >> > > > >> https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree > > > >> /bind ings/display/sunxi/sun4i-drm.txt#L169 > > > >> > > > >> Our TCON driver still expects RGB or LVDS panel / bridges on endpoint > > > >> 0. > > > > > > > > Yes, but that can only happen on TCON which has channel 0. TV TCONs > > > > (those > > > > with channel 1 only) can't have panels or bridges connected to them, > > > > because they are internally always connected to either HDMI or TV > > > > encoder or both. Actually, R40 is the only SoC, where same TV TCON can > > > > be connected to TV encoder or HDMI. Others have specialized TV TCONs, > > > > which are connect to only one encoder. > > > > > > > > IMO TV TCONs are really just stripped down LCD TCONs to support one (or > > > > max > > > > two) specific encoder. > > > > > > I agree. We've seen these first in the H3, and the reverse, TCONs only > > > with > > > LCD, on the A23/A33. > > > > > > >> So I guess this was sort of implied historically. It's no longer true. > > > >> This is something we should probably fix. > > > > > > > > Fixed in what way? You mean update bindings to mention that TCON output > > > > endpoint 0 is reserved for panels or bridges? > > > > > > Either that, or have the drm driver look at other endpoints. I guess we > > > should ask Maxime if this is already done or not, since the DSI driver > > > isn't endpoint 0 in the A33 dtsi. > > > > The DSI driver isn't really a good example for this, since the panel > > isn't described as part of the OF graph, but DSI binding require that > > it's a child of the DSI controller node. > > So should be new behaviour reverted? I mean ignoring endpoint 0 on TV TCONs. > > For me, it doesn't make sense to check for panel or bridges on TV TCONs, > because they are never exposed on physical pins. They are always connected to > TVE or HDMI encoder internally. It doesn't make sense to check for panels, yes, but it also makes sens to have a child node at the endpoint 0 for TV TCONs. > > > >> In practice our drivers don't look at it (yet), but rely on the > > > >> downstream > > > >> encoder type to determine which channel to use. > > > >> > > > >> But please add the "allwinner,tcon-channel" property as specified in > > > >> the binding. > > > > > > > > It's my understanding of TCON binding documentation that property > > > > "allwinner,tcon-channel" is needed only if TCON supports both channels. > > > > TV > > > > TCON clearly supports only channel 1. In that case, there is no doubt to > > > > which channel output endpoint belongs. > > > > > > > > If that's not true, dt bindings documentation should be reworded to > > > > contain > > > > word "needed" or something similar. Currently, no DT for newer SoC > > > > contains > > > > that property (for example, A83T, H3, H5 or even A33). > > > > Yeah, but that's mainly because we have a single output enabled for > > each channel on those newer SoCs. When / if we enable the RGB and LVDS > > output for example, we will have to set this. > > So just to be clear, before I send follow up series, I have to add > "allwinner,tcon-channel" property to DT, because both TV TCONs can be > connected to either TVE or HDMI (trough TCON TOP)? > > BTW, since this property is not used at all in the code, why not just simply > deprecate it and remove it from existing DTs? I noticed this is standard > practice for obsolete properties. It's not deprecated or obsolete, it's future-proofing. Maxime
This series adds support for R40 HDMI pipeline. It is a bit special than other already supported pipelines because it has additional unit called TCON TOP responsible for relationship configuration between mixers, TCONs and HDMI. Additionally, it has additional gates for DSI and TV TCONs, TV encoder clock settings and pin muxing between LCD and TV encoders. However, it seems that TCON TOP will become a norm, since newer Allwinner SoCs like H6 also have this unit. I tested different possible configurations: - mixer0 <> TCON-TV0 <> HDMI - mixer0 <> TCON-TV1 <> HDMI - mixer1 <> TCON-TV0 <> HDMI - mixer1 <> TCON-TV1 <> HDMI Please review. Best regards, Jernej Changes from v2: - Collected tags - Exported drm_crtc_port_mask() symbol - Removed TCON TOP reset name - TCON TOP gates have now right parents - updated TCON TOP bindings - dropped new TCON quirk due TCON TOP rework Changes from v1: - Split DT bindings patch and updated description - Split HDMI PHY patch - Move header file from TCON TOP patch to dt bindings patch - Added Rob reviewed-by tag - Used clk_hw_register_gate() instead of custom gate registration code - Reworked TCON TOP to be part of of-graph. Because of that, a lot of new patches were added. - Droped mixer index quirk patch - Reworked TCON support for TCON TOP - Updated commit messages Jernej Skrabec (24): clk: sunxi-ng: r40: Add minimal rate for video PLLs clk: sunxi-ng: r40: Allow setting parent rate to display related clocks clk: sunxi-ng: r40: Export video PLLs dt-bindings: display: sunxi-drm: Add TCON TOP description drm/sun4i: Add TCON TOP driver drm/sun4i: Fix releasing node when enumerating enpoints drm/sun4i: Split out code for enumerating endpoints in output port drm/sun4i: Add support for traversing graph with TCON TOP drm/sun4i: Don't skip TCONs if they don't have channel 0 drm/sun4i: tcon: Generalize engine search algorithm drm/sun4i: Don't check for LVDS and RGB when TCON has only ch1 drm/sun4i: Don't check for panel or bridge on TV TCONs dt-bindings: display: sun4i-drm: Add R40 mixer compatibles drm/sun4i: Add support for R40 mixers dt-bindings: display: sun4i-drm: Add description of A64 HDMI PHY drm/sun4i: Enable DW HDMI PHY clock drm/sun4i: Don't change clock bits in DW HDMI PHY driver drm/sun4i: DW HDMI PHY: Add support for second PLL drm/sun4i: Add support for second clock parent to DW HDMI PHY clk driver drm/sun4i: Add support for A64 HDMI PHY drm: of: Export drm_crtc_port_mask() drm/sun4i: DW HDMI: Expand algorithm for possible crtcs ARM: dts: sun8i: r40: Add HDMI pipeline ARM: dts: sun8i: r40: Enable HDMI output on BananaPi M2 Ultra .../bindings/display/sunxi/sun4i-drm.txt | 62 +++- .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 45 +++ arch/arm/boot/dts/sun8i-r40.dtsi | 269 ++++++++++++++++ drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 58 ++-- drivers/clk/sunxi-ng/ccu-sun8i-r40.h | 8 +- drivers/gpu/drm/drm_of.c | 5 +- drivers/gpu/drm/sun4i/Makefile | 3 +- drivers/gpu/drm/sun4i/sun4i_drv.c | 121 +++++-- drivers/gpu/drm/sun4i/sun4i_tcon.c | 66 ++-- drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 46 ++- drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 8 +- drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 54 +++- drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c | 90 ++++-- drivers/gpu/drm/sun4i/sun8i_mixer.c | 24 ++ drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 300 ++++++++++++++++++ drivers/gpu/drm/sun4i/sun8i_tcon_top.h | 40 +++ include/drm/drm_of.h | 8 + include/dt-bindings/clock/sun8i-r40-ccu.h | 4 + include/dt-bindings/clock/sun8i-tcon-top.h | 11 + 19 files changed, 1100 insertions(+), 122 deletions(-) create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.c create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.h create mode 100644 include/dt-bindings/clock/sun8i-tcon-top.h