mbox series

[U-Boot,GIT,PULL] Xilinx changes for v2018.07-rc2

Message ID 2bd521ee-65de-c491-96ba-0ea9f3b730f7@monstr.eu
State Accepted
Delegated to: Tom Rini
Headers show
Series [U-Boot,GIT,PULL] Xilinx changes for v2018.07-rc2 | expand

Pull-request

git://www.denx.de/git/u-boot-microblaze.git tags/xilinx-for-v2018.07-rc2

Message

Michal Simek June 15, 2018, 12:53 p.m. UTC 
Hi Tom,

please pull these changes to your tree.
Buildman and travis looks good
https://travis-ci.org/michalsimek/u-boot/builds/392586380

Thanks,
Michal

The following changes since commit 606fddd76c7a045c09d544357806b0b4de4845c7:

  Merge branch 'master' of git://git.denx.de/u-boot-net (2018-06-14
07:20:41 -0400)

are available in the git repository at:


  git://www.denx.de/git/u-boot-microblaze.git tags/xilinx-for-v2018.07-rc2

for you to fetch changes up to b729ed0d95415bd694a6b67c0761f03ef5a1e2bc:

  serial: zynq: Make zynq_serial_setbrg static (2018-06-15 08:54:05 +0200)

----------------------------------------------------------------
Xilinx fixes for v2018.07-rc2

Zynq:
- Fix missing watchdog header
- DT fixes

ZynqMP:
- emmc configuration split
- Enable SPD
- Fix PMUFW_INIT_FILE logic
- Coverity fixes in SoC code

timer
- Add timer_get_boot_us

mmc:
- Fix MMC HS200 tuning command

serial:
- Fix scrabled chars with OF_LIVE

----------------------------------------------------------------
Luca Ceresoli (1):
      arm64: zynqmp: accept an absolute path for PMUFW_INIT_FILE

Michal Simek (13):
      arm: zynq: Add missing watchdog header
      arm: zynq: Drop #address-cells and #size-cells from gpio-keys
      timer: cadence: Implement timer_get_boot_us
      arm64: zynqmp: Enable SPD ddr support for zcu102 targets
      gpio: zynq: Do not check unsigned type that is >= 0
      mmc: zynq: Fix tuning_loop_counter type in
arasan_sdhci_execute_tuning()
      arm64: zynqmp: Check return value from calloc
      arm64: zynqmp: Check return value in zynqmp_mmio_rawwrite()
      gpio: zynq_gpio: bank description should use unsigned type
      serial: zynq: Use BIT macros instead of shifts and full hex numbers
      serial: zynq: Write chars till output fifo is full
      serial: zynq: Initialize uart only before relocation
      serial: zynq: Make zynq_serial_setbrg static

Siva Durga Prasad Paladugu (2):
      arm64: zynqmp: Split emmc configuration into emmc0 and emmc1
      mmc: sdhci: Fix MMC HS200 tuning command failures

 arch/arm/cpu/armv8/zynqmp/cpu.c
          |  6 +++++-
 arch/arm/dts/Makefile
          |  3 ++-
 arch/arm/dts/zynq-zc702.dts
          |  2 --
 arch/arm/dts/zynq-zturn.dts
          |  2 --
 arch/arm/dts/{zynqmp-mini-emmc.dts => zynqmp-mini-emmc0.dts}
          | 20 ++++++--------------
 arch/arm/dts/zynqmp-mini-emmc1.dts
          | 67
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/zynqmp-zcu100-revC.dts
          |  2 --
 arch/arm/dts/zynqmp-zcu102-revA.dts
          |  2 --
 arch/arm/dts/zynqmp-zcu106-revA.dts
          |  2 --
 arch/arm/dts/zynqmp-zcu111-revA.dts
          |  2 --
 board/xilinx/zynq/board.c
          |  1 +
 board/xilinx/zynqmp/zynqmp.c
          |  2 ++
 configs/{xilinx_zynqmp_mini_emmc_defconfig =>
xilinx_zynqmp_mini_emmc0_defconfig} |  3 ++-
 configs/xilinx_zynqmp_mini_emmc1_defconfig
          | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 configs/xilinx_zynqmp_r5_defconfig
          |  2 ++
 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
          |  1 +
 configs/xilinx_zynqmp_zcu102_revA_defconfig
          |  1 +
 configs/xilinx_zynqmp_zcu102_revB_defconfig
          |  1 +
 drivers/gpio/zynq_gpio.c
          | 10 +++++-----
 drivers/mmc/sdhci.c
          |  8 ++++----
 drivers/mmc/zynq_sdhci.c
          |  2 +-
 drivers/serial/serial_zynq.c
          | 24 +++++++++++++++---------
 drivers/timer/cadence-ttc.c
          | 22 ++++++++++++++++++++++
 include/configs/xilinx_zynqmp_zcu102.h
          |  3 +++
 scripts/Makefile.spl
          |  8 +++++++-
 25 files changed, 196 insertions(+), 49 deletions(-)
 rename arch/arm/dts/{zynqmp-mini-emmc.dts => zynqmp-mini-emmc0.dts} (77%)
 create mode 100644 arch/arm/dts/zynqmp-mini-emmc1.dts
 rename configs/{xilinx_zynqmp_mini_emmc_defconfig =>
xilinx_zynqmp_mini_emmc0_defconfig} (94%)
 create mode 100644 configs/xilinx_zynqmp_mini_emmc1_defconfig

Comments

Tom Rini June 16, 2018, 2:34 a.m. UTC | #1 
On Fri, Jun 15, 2018 at 02:53:58PM +0200, Michal Simek wrote:

> Hi Tom,
> 
> please pull these changes to your tree.
> Buildman and travis looks good
> https://travis-ci.org/michalsimek/u-boot/builds/392586380
> 
> Thanks,
> Michal
> 
> The following changes since commit 606fddd76c7a045c09d544357806b0b4de4845c7:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-net (2018-06-14
> 07:20:41 -0400)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-microblaze.git tags/xilinx-for-v2018.07-rc2
> 
> for you to fetch changes up to b729ed0d95415bd694a6b67c0761f03ef5a1e2bc:
> 
>   serial: zynq: Make zynq_serial_setbrg static (2018-06-15 08:54:05 +0200)
> 

Applied to u-boot/master, thanks!