Message ID | 20180525100121.28214-3-rnayak@codeaurora.org |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | Add powerdomain driver for corners on msm8996/sdm845 | expand |
Hello Rajendra, On 05/25/2018 03:01 AM, Rajendra Nayak wrote: > On Qualcomm platforms, an OPP node needs to describe an s/Qualcomm/Qualcomm Technologies, Inc./ > additional level/corner value that is then communicated to > a remote microprocessor by the CPU, which then takes some > actions (like adjusting voltage values across various rails) > based on the value passed. > > Describe these bindings in the qcom-opp bindings document. > > Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > .../devicetree/bindings/opp/qcom-opp.txt | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/opp/qcom-opp.txt > > diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt > new file mode 100644 > index 000000000000..db4d970c7ec7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/opp/qcom-opp.txt > @@ -0,0 +1,25 @@ > +Qualcomm OPP bindings to descibe OPP nodes with corner/level values s/Qualcomm/Qualcomm Technologies, Inc./ ? s/descibe/describe/ > + > +OPP tables for devices on Qualcomm platforms require an additional s/Qualcomm/Qualcomm Technologies, Inc./ > +platform specific corner/level value to be specified. > +This value is passed on to the RPM (Resource Power Manager) by Do you want to mention RPMh here as well? > +the CPU, which then takes the necessary actions to set a voltage > +rail to an appropriate voltage based on the value passed. > + > +The bindings are based on top of the operating-points-v2 bindings > +described in Documentation/devicetree/bindings/opp/opp.txt > +Additional properties are described below. > + > +* OPP Table Node > + > +Required properties: > +- compatible: Allow OPPs to express their compatibility. It should be: > + "operating-points-v2-qcom-level" > + > +* OPP Node > + > +Required properties: > +- qcom,level: On Qualcomm platforms an OPP node can describe a positive value s/Qualcomm/Qualcomm Technologies, Inc./ > +representing a corner/level that's communicated with a remote microprocessor > +(usually called the RPM) which then translates it into a certain voltage on > +a voltage rail. Should these lines be indented 2 spaces as is the case for the compatible property above? Could you add an example for both RPM and RPMh in this binding file? Thanks, David
On 05/26/2018 04:03 AM, David Collins wrote: > Hello Rajendra, > > On 05/25/2018 03:01 AM, Rajendra Nayak wrote: >> On Qualcomm platforms, an OPP node needs to describe an > > s/Qualcomm/Qualcomm Technologies, Inc./ > > [] .. > > s/Qualcomm/Qualcomm Technologies, Inc./ ? > > s/descibe/describe/ > > >> + >> +OPP tables for devices on Qualcomm platforms require an additional > > s/Qualcomm/Qualcomm Technologies, Inc./ > > >> +platform specific corner/level value to be specified. >> +This value is passed on to the RPM (Resource Power Manager) by > > Do you want to mention RPMh here as well? > > [] .. >> + >> +Required properties: >> +- qcom,level: On Qualcomm platforms an OPP node can describe a positive value > > s/Qualcomm/Qualcomm Technologies, Inc./ > > >> +representing a corner/level that's communicated with a remote microprocessor >> +(usually called the RPM) which then translates it into a certain voltage on >> +a voltage rail. > > Should these lines be indented 2 spaces as is the case for the compatible > property above? > > Could you add an example for both RPM and RPMh in this binding file? Thanks David for the review. I will fix all this up when I respin.
diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt new file mode 100644 index 000000000000..db4d970c7ec7 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/qcom-opp.txt @@ -0,0 +1,25 @@ +Qualcomm OPP bindings to descibe OPP nodes with corner/level values + +OPP tables for devices on Qualcomm platforms require an additional +platform specific corner/level value to be specified. +This value is passed on to the RPM (Resource Power Manager) by +the CPU, which then takes the necessary actions to set a voltage +rail to an appropriate voltage based on the value passed. + +The bindings are based on top of the operating-points-v2 bindings +described in Documentation/devicetree/bindings/opp/opp.txt +Additional properties are described below. + +* OPP Table Node + +Required properties: +- compatible: Allow OPPs to express their compatibility. It should be: + "operating-points-v2-qcom-level" + +* OPP Node + +Required properties: +- qcom,level: On Qualcomm platforms an OPP node can describe a positive value +representing a corner/level that's communicated with a remote microprocessor +(usually called the RPM) which then translates it into a certain voltage on +a voltage rail.