Message ID | 1296168378-8399-2-git-send-email-linux@bohmer.net |
---|---|
State | Superseded |
Delegated to: | Reinhard Meyer |
Headers | show |
Hi All, 2011/1/27 Remy Bohmer <linux@bohmer.net>: > Since U-boot v2010.12 the at91sam9261ek board is broken. > This is solved and tested on this board. > > Note: It requires that the 1st stage bootloader (like Atmel at91-bootstrap) > to load U-boot at a different address compared to previous releases of > U-boot due to conflicts in the BSS area during relocation. > (0x23f00000 -> -0x23e00000) > > Derived from a patch of: Alexander Stein <alexander.stein@systec-electronic.com> > > Signed-off-by: Remy Bohmer <linux@bohmer.net> For your information: This patch requires this patch applied to the tree first to make it work: http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/93537 Kind regards, Remy
Hi Remy, Le 27/01/2011 23:46, Remy Bohmer a écrit : > Since U-boot v2010.12 the at91sam9261ek board is broken. > This is solved and tested on this board. > > Note: It requires that the 1st stage bootloader (like Atmel at91-bootstrap) > to load U-boot at a different address compared to previous releases of > U-boot due to conflicts in the BSS area during relocation. > (0x23f00000 -> -0x23e00000) > > Derived from a patch of: Alexander Stein<alexander.stein@systec-electronic.com> > > Signed-off-by: Remy Bohmer<linux@bohmer.net> > --- > board/atmel/at91sam9261ek/Makefile | 10 +++++----- > board/atmel/at91sam9261ek/at91sam9261ek.c | 7 ++++--- > board/atmel/at91sam9261ek/config.mk | 1 - > include/configs/at91sam9261ek.h | 25 +++++++++++++++++++++---- > 4 files changed, 30 insertions(+), 13 deletions(-) > delete mode 100644 board/atmel/at91sam9261ek/config.mk > > diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile > index 9d20ba0..1da810f 100644 > --- a/board/atmel/at91sam9261ek/Makefile > +++ b/board/atmel/at91sam9261ek/Makefile > @@ -29,16 +29,16 @@ include $(TOPDIR)/config.mk > > LIB = $(obj)lib$(BOARD).o > > -COBJS-y += at91sam9261ek.o > +COBJS-y += $(BOARD).o > COBJS-y += led.o > COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o > > -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) > -OBJS := $(addprefix $(obj),$(COBJS-y)) > -SOBJS := $(addprefix $(obj),$(SOBJS)) > +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) > +OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y)) > +SOBJS := $(addprefix $(obj),$(SOBJS-y)) What is the rationale for putting both C *and* assembly language objects in OBJS? > $(LIB): $(obj).depend $(OBJS) $(SOBJS) > - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) > + $(call cmd_link_o_target, $(OBJS)) If there is a rationale for putting all objects in OBJS, then SOBJS should be removed from the dependencies of LIB. If there is not, then SOBJS should remain in the '$(call...)'. > clean: > rm -f $(SOBJS) $(OBJS) > diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c > index de5cfae..25c181e 100644 > --- a/board/atmel/at91sam9261ek/at91sam9261ek.c > +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c > @@ -246,7 +246,7 @@ int board_init(void) > gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK; > #endif > /* adress of boot parameters */ > - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; > + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; > > at91_serial_hw_init(); > #ifdef CONFIG_CMD_NAND > @@ -273,8 +273,9 @@ int board_eth_init(bd_t *bis) > > int dram_init(void) > { > - gd->bd->bi_dram[0].start = PHYS_SDRAM; > - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; > + /* dram_init must store complete ramsize in gd->ram_size */ > + gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, > + CONFIG_SYS_SDRAM_SIZE); > return 0; > } > > diff --git a/board/atmel/at91sam9261ek/config.mk b/board/atmel/at91sam9261ek/config.mk > deleted file mode 100644 > index e554a45..0000000 > --- a/board/atmel/at91sam9261ek/config.mk > +++ /dev/null > @@ -1 +0,0 @@ > -CONFIG_SYS_TEXT_BASE = 0x23f00000 > diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h > index 401478b..0cffd94 100644 > --- a/include/configs/at91sam9261ek.h > +++ b/include/configs/at91sam9261ek.h > @@ -27,6 +27,8 @@ > #ifndef __CONFIG_H > #define __CONFIG_H > > +#include<asm/sizes.h> > + > #define CONFIG_AT91_LEGACY > > /* ARM asynchronous clock */ > @@ -39,6 +41,7 @@ > #else > #define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/ > #endif > +#define CONFIG_AT91FAMILY > #define CONFIG_ARCH_CPU_INIT > #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ > > @@ -105,11 +108,21 @@ > #define CONFIG_CMD_DHCP 1 > #define CONFIG_CMD_NAND 1 > #define CONFIG_CMD_USB 1 > +#define CONFIG_CMD_CACHE 1 > > /* SDRAM */ > #define CONFIG_NR_DRAM_BANKS 1 > -#define PHYS_SDRAM 0x20000000 > -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ > +#define CONFIG_SYS_SDRAM_BASE 0x20000000 > +#define CONFIG_SYS_SDRAM_SIZE SZ_64M /* 64 megs */ > + > +/* > + * AT91-bootstrap expects that U-boot needs to be loaded at 0x23f00000 > + * but since U-boot is now being relocated to the end of RAM which is > + * almost in the same area, there will be an overlap in the BSS segment > + * resulting in a lockup during boot. So, we need to tell the > + * AT91-bootstrap code to load it at a lower address, namely 0x23e00000 > + */ > +#define CONFIG_SYS_TEXT_BASE 0x23e00000 > > /* DataFlash */ > #define CONFIG_ATMEL_DATAFLASH_SPI > @@ -168,7 +181,7 @@ > > #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ > > -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM > +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE > #define CONFIG_SYS_MEMTEST_END 0x23e00000 > > #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 > @@ -230,8 +243,12 @@ > * Size of malloc() pool > */ > #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) > +/* size in bytes reserved for initial data */ > + > +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \ > + - GENERATED_GBL_DATA_SIZE) > > -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ > +#define CONFIG_STACKSIZE (SZ_32K) /* regular stack */ Do not use SZ_ constants -- several instances in this patch. > #ifdef CONFIG_USE_IRQ > #error CONFIG_USE_IRQ not supported Amicalement,
Hi, >> -COBJS-y += at91sam9261ek.o >> +COBJS-y += $(BOARD).o >> COBJS-y += led.o >> COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o >> >> -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) >> -OBJS := $(addprefix $(obj),$(COBJS-y)) >> -SOBJS := $(addprefix $(obj),$(SOBJS)) >> +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) >> +OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y)) >> +SOBJS := $(addprefix $(obj),$(SOBJS-y)) > > What is the rationale for putting both C *and* assembly language objects > in OBJS? No rationale, except made this Makefile more in line with another board. Reworked, will be in patch-v2 >> >> -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ >> +#define CONFIG_STACKSIZE (SZ_32K) /* regular stack */ > > Do not use SZ_ constants -- several instances in this patch. Reverted these changes in patch-v2. Thanks. Kind regards, Remy
Dear Remy On 01/27/2011 11:46 PM, Remy Bohmer wrote: > Since U-boot v2010.12 the at91sam9261ek board is broken. > This is solved and tested on this board. > > Note: It requires that the 1st stage bootloader (like Atmel at91-bootstrap) > to load U-boot at a different address compared to previous releases of > U-boot due to conflicts in the BSS area during relocation. > (0x23f00000 -> -0x23e00000) > > Derived from a patch of: Alexander Stein <alexander.stein@systec-electronic.com> > > Signed-off-by: Remy Bohmer <linux@bohmer.net> Hi /home/toolchain/bin/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld -pie -r -o libat91.o lowlevel_init.o clock.o cpu.o reset.o timer.o /home/toolchain/bin/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld: -r and -shared may not be used together I have tried this patch but this a problem releated to linking option. Do you have this problem? Michael > --- > board/atmel/at91sam9261ek/Makefile | 10 +++++----- > board/atmel/at91sam9261ek/at91sam9261ek.c | 7 ++++--- > board/atmel/at91sam9261ek/config.mk | 1 - > include/configs/at91sam9261ek.h | 25 +++++++++++++++++++++---- > 4 files changed, 30 insertions(+), 13 deletions(-) > delete mode 100644 board/atmel/at91sam9261ek/config.mk > > diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile > index 9d20ba0..1da810f 100644 > --- a/board/atmel/at91sam9261ek/Makefile > +++ b/board/atmel/at91sam9261ek/Makefile > @@ -29,16 +29,16 @@ include $(TOPDIR)/config.mk > > LIB = $(obj)lib$(BOARD).o > > -COBJS-y += at91sam9261ek.o > +COBJS-y += $(BOARD).o > COBJS-y += led.o > COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o > > -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) > -OBJS := $(addprefix $(obj),$(COBJS-y)) > -SOBJS := $(addprefix $(obj),$(SOBJS)) > +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) > +OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y)) > +SOBJS := $(addprefix $(obj),$(SOBJS-y)) > > $(LIB): $(obj).depend $(OBJS) $(SOBJS) > - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) > + $(call cmd_link_o_target, $(OBJS)) > > clean: > rm -f $(SOBJS) $(OBJS) > diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c > index de5cfae..25c181e 100644 > --- a/board/atmel/at91sam9261ek/at91sam9261ek.c > +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c > @@ -246,7 +246,7 @@ int board_init(void) > gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK; > #endif > /* adress of boot parameters */ > - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; > + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; > > at91_serial_hw_init(); > #ifdef CONFIG_CMD_NAND > @@ -273,8 +273,9 @@ int board_eth_init(bd_t *bis) > > int dram_init(void) > { > - gd->bd->bi_dram[0].start = PHYS_SDRAM; > - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; > + /* dram_init must store complete ramsize in gd->ram_size */ > + gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, > + CONFIG_SYS_SDRAM_SIZE); > return 0; > } > > diff --git a/board/atmel/at91sam9261ek/config.mk b/board/atmel/at91sam9261ek/config.mk > deleted file mode 100644 > index e554a45..0000000 > --- a/board/atmel/at91sam9261ek/config.mk > +++ /dev/null > @@ -1 +0,0 @@ > -CONFIG_SYS_TEXT_BASE = 0x23f00000 > diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h > index 401478b..0cffd94 100644 > --- a/include/configs/at91sam9261ek.h > +++ b/include/configs/at91sam9261ek.h > @@ -27,6 +27,8 @@ > #ifndef __CONFIG_H > #define __CONFIG_H > > +#include <asm/sizes.h> > + > #define CONFIG_AT91_LEGACY > > /* ARM asynchronous clock */ > @@ -39,6 +41,7 @@ > #else > #define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/ > #endif > +#define CONFIG_AT91FAMILY > #define CONFIG_ARCH_CPU_INIT > #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ > > @@ -105,11 +108,21 @@ > #define CONFIG_CMD_DHCP 1 > #define CONFIG_CMD_NAND 1 > #define CONFIG_CMD_USB 1 > +#define CONFIG_CMD_CACHE 1 > > /* SDRAM */ > #define CONFIG_NR_DRAM_BANKS 1 > -#define PHYS_SDRAM 0x20000000 > -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ > +#define CONFIG_SYS_SDRAM_BASE 0x20000000 > +#define CONFIG_SYS_SDRAM_SIZE SZ_64M /* 64 megs */ > + > +/* > + * AT91-bootstrap expects that U-boot needs to be loaded at 0x23f00000 > + * but since U-boot is now being relocated to the end of RAM which is > + * almost in the same area, there will be an overlap in the BSS segment > + * resulting in a lockup during boot. So, we need to tell the > + * AT91-bootstrap code to load it at a lower address, namely 0x23e00000 > + */ > +#define CONFIG_SYS_TEXT_BASE 0x23e00000 > > /* DataFlash */ > #define CONFIG_ATMEL_DATAFLASH_SPI > @@ -168,7 +181,7 @@ > > #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ > > -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM > +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE > #define CONFIG_SYS_MEMTEST_END 0x23e00000 > > #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 > @@ -230,8 +243,12 @@ > * Size of malloc() pool > */ > #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) > +/* size in bytes reserved for initial data */ > + > +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \ > + - GENERATED_GBL_DATA_SIZE) > > -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ > +#define CONFIG_STACKSIZE (SZ_32K) /* regular stack */ > > #ifdef CONFIG_USE_IRQ > #error CONFIG_USE_IRQ not supported
Le 01/02/2011 11:45, Michael Trimarchi a écrit : > Hi > > /home/toolchain/bin/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld -pie -r -o libat91.o lowlevel_init.o clock.o cpu.o reset.o timer.o > /home/toolchain/bin/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld: -r and -shared may not be used together > > I have tried this patch but this a problem releated to linking option. Do you have this problem? > > Michael Read up recent posts on the list: this was detected and is fixed in the master branch of the u-boot-arm repository. Amicalement,
Dear all, >> /home/toolchain/bin/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld -pie -r -o libat91.o lowlevel_init.o clock.o cpu.o reset.o timer.o >> /home/toolchain/bin/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld: -r and -shared may not be used together >> >> I have tried this patch but this a problem releated to linking option. Do you have this problem? >> >> Michael > > Read up recent posts on the list: this was detected and is fixed in the > master branch of the u-boot-arm repository. I'll rebase u-boot-atmel on u-boot-arm/master then. Please rebase at91 related patches on u-boot-atmel/rework then (my time permitting, that branch will exist somewhere tomorrow) Best Regards, Reinhard
diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile index 9d20ba0..1da810f 100644 --- a/board/atmel/at91sam9261ek/Makefile +++ b/board/atmel/at91sam9261ek/Makefile @@ -29,16 +29,16 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS-y += at91sam9261ek.o +COBJS-y += $(BOARD).o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + $(call cmd_link_o_target, $(OBJS)) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index de5cfae..25c181e 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -246,7 +246,7 @@ int board_init(void) gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK; #endif /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND @@ -273,8 +273,9 @@ int board_eth_init(bd_t *bis) int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); return 0; } diff --git a/board/atmel/at91sam9261ek/config.mk b/board/atmel/at91sam9261ek/config.mk deleted file mode 100644 index e554a45..0000000 --- a/board/atmel/at91sam9261ek/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x23f00000 diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 401478b..0cffd94 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -27,6 +27,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <asm/sizes.h> + #define CONFIG_AT91_LEGACY /* ARM asynchronous clock */ @@ -39,6 +41,7 @@ #else #define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/ #endif +#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ @@ -105,11 +108,21 @@ #define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 #define CONFIG_CMD_USB 1 +#define CONFIG_CMD_CACHE 1 /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE SZ_64M /* 64 megs */ + +/* + * AT91-bootstrap expects that U-boot needs to be loaded at 0x23f00000 + * but since U-boot is now being relocated to the end of RAM which is + * almost in the same area, there will be an overlap in the BSS segment + * resulting in a lockup during boot. So, we need to tell the + * AT91-bootstrap code to load it at a lower address, namely 0x23e00000 + */ +#define CONFIG_SYS_TEXT_BASE 0x23e00000 /* DataFlash */ #define CONFIG_ATMEL_DATAFLASH_SPI @@ -168,7 +181,7 @@ #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END 0x23e00000 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 @@ -230,8 +243,12 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) +/* size in bytes reserved for initial data */ + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \ + - GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ +#define CONFIG_STACKSIZE (SZ_32K) /* regular stack */ #ifdef CONFIG_USE_IRQ #error CONFIG_USE_IRQ not supported
Since U-boot v2010.12 the at91sam9261ek board is broken. This is solved and tested on this board. Note: It requires that the 1st stage bootloader (like Atmel at91-bootstrap) to load U-boot at a different address compared to previous releases of U-boot due to conflicts in the BSS area during relocation. (0x23f00000 -> -0x23e00000) Derived from a patch of: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Remy Bohmer <linux@bohmer.net> --- board/atmel/at91sam9261ek/Makefile | 10 +++++----- board/atmel/at91sam9261ek/at91sam9261ek.c | 7 ++++--- board/atmel/at91sam9261ek/config.mk | 1 - include/configs/at91sam9261ek.h | 25 +++++++++++++++++++++---- 4 files changed, 30 insertions(+), 13 deletions(-) delete mode 100644 board/atmel/at91sam9261ek/config.mk