| Message ID | 20180511214339.24139-3-f.fainelli@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [GIT,PULL,1/5] Broadcom defconfig changes for 4.18 | expand |
On Fri, May 11, 2018 at 02:43:36PM -0700, Florian Fainelli wrote: > The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338: > > Linux 4.17-rc1 (2018-04-15 18:24:20 -0700) > > are available in the git repository at: > > https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.18/devicetree > > for you to fetch changes up to a05f1e36a57d02374a203719abc5bf2e8c51e125: > > ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new partitions syntax (2018-05-11 09:46:38 -0700) > > ---------------------------------------------------------------- > This pull request contains Broadcom ARM-based SoC Device Tree changes > for 4.18, please pull the following: > > - Stefan provides updates to the BCM2835 RNG Device Tree binding and > Device Tree node by adding its missing interrupt line. > > - Rafal switches the Luxul XWC-1000 and the D-Link DIR-885L to the new > partitions syntax which allows specifying a partition parser > > - Rafal also updates a bunch of BCM5301X Device Tree source files to a > more standard SPDX tag and dual GPL 2.0 and MIT. This is a follow-up > to this discussion with Greg: > https://lkml.org/lkml/2018/4/28/179 > > - Dan adds support for two Luxul devices: XAP-1610 (based on BCM47094) > and XWR-3150 V1 (similar to XWR-3100) > > - Stefan provides a set of updates to the BCM283x Device Tree sources to > support the Raspberry Pi 3 B+ for both the ARM and ARM64 kernels. He > adds the required nodes for the LAN7515 USB Ethernet, Cypress CYW43455 > BT/WiFi combo chip. Stefan also provides a few fixes for the PWM pin > assignment for RPi 3B and Zero/Zero W. Finally, Stefan adds the > missing GPIOs for controlling additional peripherals now that support > for the RPi 3 GPIO expander has landed Merged, thanks! -Olof
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338: Linux 4.17-rc1 (2018-04-15 18:24:20 -0700) are available in the git repository at: https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.18/devicetree for you to fetch changes up to a05f1e36a57d02374a203719abc5bf2e8c51e125: ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new partitions syntax (2018-05-11 09:46:38 -0700) ---------------------------------------------------------------- This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.18, please pull the following: - Stefan provides updates to the BCM2835 RNG Device Tree binding and Device Tree node by adding its missing interrupt line. - Rafal switches the Luxul XWC-1000 and the D-Link DIR-885L to the new partitions syntax which allows specifying a partition parser - Rafal also updates a bunch of BCM5301X Device Tree source files to a more standard SPDX tag and dual GPL 2.0 and MIT. This is a follow-up to this discussion with Greg: https://lkml.org/lkml/2018/4/28/179 - Dan adds support for two Luxul devices: XAP-1610 (based on BCM47094) and XWR-3150 V1 (similar to XWR-3100) - Stefan provides a set of updates to the BCM283x Device Tree sources to support the Raspberry Pi 3 B+ for both the ARM and ARM64 kernels. He adds the required nodes for the LAN7515 USB Ethernet, Cypress CYW43455 BT/WiFi combo chip. Stefan also provides a few fixes for the PWM pin assignment for RPi 3B and Zero/Zero W. Finally, Stefan adds the missing GPIOs for controlling additional peripherals now that support for the RPi 3 GPIO expander has landed ---------------------------------------------------------------- Dan Haab (2): ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1 ARM: dts: BCM5301X: Add DT for Luxul XAP-1610 Florian Fainelli (1): Merge tag 'bcm2835-dt-next-2018-04-30' into devicetree/next Rafał Miłecki (5): ARM: dts: BCM5301X: Switch Luxul XWC-1000 to the new fixed partitions syntax ARM: dts: BCM5301X: Relicense most DTS files to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Relicense Buffalo files to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Relicense Asus RT-AC87U file to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new partitions syntax Stefan Wahren (7): dt-binding: rng: Add interrupt property for BCM2835 ARM: bcm283x: Add missing interrupt for RNG block ARM: dts: bcm283x: Fix PWM pin assignment ARM: dts: bcm2837: Add missing GPIOs of Expander dt-bindings: bcm: Add Raspberry Pi 3 B+ ARM: dts: bcm2837: Add Raspberry Pi 3 B+ arm64: dts: broadcom: Add reference to Raspberry Pi 3 B+ .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 + .../devicetree/bindings/rng/brcm,bcm2835.txt | 9 +- arch/arm/boot/dts/Makefile | 3 + arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi-a.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi-b.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 -- arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 6 ++ arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 108 +++++++++++++++++++++ arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 26 ++++- arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 27 ++++++ arch/arm/boot/dts/bcm283x.dtsi | 1 + arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 13 +-- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 13 +-- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 3 +- arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 3 +- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 3 +- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 15 ++- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 13 +-- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 3 +- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 13 +-- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 13 +-- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 13 +-- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 3 +- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 +- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 3 +- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 13 +-- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 3 +- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 3 +- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 13 +-- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 3 +- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 25 ++--- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 3 +- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 3 +- arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 57 +++++++++++ arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 3 +- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 +- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 77 +++++++++++++++ arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 +- arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi | 3 +- arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 3 +- arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi | 3 +- arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 3 +- arch/arm64/boot/dts/broadcom/Makefile | 3 +- .../boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts | 2 + 47 files changed, 396 insertions(+), 164 deletions(-) create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts create mode 100644 arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts