| Message ID | 20180423072301.11962-3-peda@axentia.se |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add tda998x (HDMI) support to atmel-hlcdc | expand |
On Mon, 23 Apr 2018 09:22:55 +0200 Peter Rosin <peda@axentia.se> wrote: > With bus-type/bus-width properties in the endpoint nodes, the video- > interface of the connection can be specified for cases where the > heuristic fails to select the correct output mode. This can happen > e.g. if not all RGB pins are routed on the PCB; the driver has no > way of knowing this, and needs to be told explicitly. > > This is critical for the devices that have the "conflicting output > formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant > RGB bits move around depending on the selected output mode. For > devices that do not have the "conflicting output formats" issue > (SAMA5D2, SAMA5D4), this is completely irrelevant. > > Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> > --- > .../devicetree/bindings/display/atmel/hlcdc-dc.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt > index 82f2acb3d374..9de434a8f523 100644 > --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt > +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt > @@ -15,6 +15,14 @@ Required children nodes: > to external devices using the OF graph reprensentation (see ../graph.txt). > At least one port node is required. > > +Optional properties in grandchild nodes: > + Any endpoint grandchild node may specify a desired video interface > + according to ../../media/video-interfaces.txt, specifically > + - bus-type: must be <0>. > + - bus-width: recognized values are <12>, <16>, <18> and <24>, and > + override any output mode selection heuristic, forcing "rgb444", > + "rgb565", "rgb666" and "rgb888" respectively. > + > Example: > > hlcdc: hlcdc@f0030000 { > @@ -50,3 +58,21 @@ Example: > #pwm-cells = <3>; > }; > }; > + > + > +Example 2: With a video interface override to force rgb565; as above > +but with these changes/additions: > + > + &hlcdc { > + hlcdc-display-controller { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>; > + > + port@0 { > + hlcdc_panel_output: endpoint@0 { > + bus-type = <0>; > + bus-width = <16>; > + }; > + }; > + }; > + }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Apr 23, 2018 at 09:22:55AM +0200, Peter Rosin wrote: > With bus-type/bus-width properties in the endpoint nodes, the video- > interface of the connection can be specified for cases where the > heuristic fails to select the correct output mode. This can happen > e.g. if not all RGB pins are routed on the PCB; the driver has no > way of knowing this, and needs to be told explicitly. > > This is critical for the devices that have the "conflicting output > formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant > RGB bits move around depending on the selected output mode. For > devices that do not have the "conflicting output formats" issue > (SAMA5D2, SAMA5D4), this is completely irrelevant. > > Signed-off-by: Peter Rosin <peda@axentia.se> > --- > .../devicetree/bindings/display/atmel/hlcdc-dc.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) Reviewed-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt index 82f2acb3d374..9de434a8f523 100644 --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt @@ -15,6 +15,14 @@ Required children nodes: to external devices using the OF graph reprensentation (see ../graph.txt). At least one port node is required. +Optional properties in grandchild nodes: + Any endpoint grandchild node may specify a desired video interface + according to ../../media/video-interfaces.txt, specifically + - bus-type: must be <0>. + - bus-width: recognized values are <12>, <16>, <18> and <24>, and + override any output mode selection heuristic, forcing "rgb444", + "rgb565", "rgb666" and "rgb888" respectively. + Example: hlcdc: hlcdc@f0030000 { @@ -50,3 +58,21 @@ Example: #pwm-cells = <3>; }; }; + + +Example 2: With a video interface override to force rgb565; as above +but with these changes/additions: + + &hlcdc { + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + bus-type = <0>; + bus-width = <16>; + }; + }; + }; + };
With bus-type/bus-width properties in the endpoint nodes, the video- interface of the connection can be specified for cases where the heuristic fails to select the correct output mode. This can happen e.g. if not all RGB pins are routed on the PCB; the driver has no way of knowing this, and needs to be told explicitly. This is critical for the devices that have the "conflicting output formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant RGB bits move around depending on the selected output mode. For devices that do not have the "conflicting output formats" issue (SAMA5D2, SAMA5D4), this is completely irrelevant. Signed-off-by: Peter Rosin <peda@axentia.se> --- .../devicetree/bindings/display/atmel/hlcdc-dc.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+)