Message ID | 1295843342-1122-14-git-send-email-bigeasy@linutronix.de |
---|---|
State | Superseded |
Headers | show |
* Sebastian Andrzej Siewior | 2011-01-24 09:59:01 [+0530]: >diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c >index c7ff8df..2709e00 100644 >--- a/drivers/rtc/rtc-cmos.c >+++ b/drivers/rtc/rtc-cmos.c >@@ -1123,6 +1125,46 @@ static struct pnp_driver cmos_pnp_driver = { > > #endif /* CONFIG_PNP */ > >+#ifdef CONFIG_OF >+static const struct of_device_id of_cmos_match[] = { >+ { >+ .compatible = "motorola,mc146818", >+ }, >+ { }, >+}; Andreas, this is the compatible string I'm using. Could you please tell me what is OLPC using? So maybe we could stick to the same compatible string. Sebastian
On Mon, Jan 24, 2011 at 09:59:01AM +0530, Sebastian Andrzej Siewior wrote: > This allows to load the OF driver based informations from the device > tree. Systems without BIOS may need to perform some initialization. > PowerPC creates a PNP device from the OF information and performs this > kind of initialization in their private PCI quirk. This looks more > generic. > > Cc: rtc-linux@googlegroups.com > Cc: Alessandro Zummo <a.zummo@towertech.it> > Cc: devicetree-discuss@lists.ozlabs.org > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> > Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> > --- > Documentation/powerpc/dts-bindings/rtc-cmos.txt | 28 ++++++++++++++ > drivers/rtc/rtc-cmos.c | 46 +++++++++++++++++++++++ > 2 files changed, 74 insertions(+), 0 deletions(-) > create mode 100644 Documentation/powerpc/dts-bindings/rtc-cmos.txt > > diff --git a/Documentation/powerpc/dts-bindings/rtc-cmos.txt b/Documentation/powerpc/dts-bindings/rtc-cmos.txt > new file mode 100644 > index 0000000..7382989 > --- /dev/null > +++ b/Documentation/powerpc/dts-bindings/rtc-cmos.txt Move to Documentation/devicetree/bindings/rtc/ > @@ -0,0 +1,28 @@ > + Motorola mc146818 compatible RTC > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > + > +Required properties: > + - compatible : "motorola,mc146818" > + - reg : should contain registers location and length. > + > +Optional properties: > + - interrupts : should contain interrupt. > + - interrupt-parent : interrupt source phandle. > + - ctrl-reg : Contains the initial value of the control register also > + called "Register B". > + - freq-reg : Contains the initial value of the frequency register also > + called "Regsiter A". > + > +"Register A" and "B" are usually initialized by the firmware (BIOS for > +instance). If this is not done, it can be performed by the driver. > + > +ISA Example: > + > + rtc@70 { > + compatible = "motorola,mc146818"; > + interrupts = <8 3>; > + interrupt-parent = <&ioapic1>; > + ctrl-reg = <2>; > + freq-reg = <0x26>; > + reg = <1 0x70 2>; > + }; > diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c > index c7ff8df..2709e00 100644 > --- a/drivers/rtc/rtc-cmos.c > +++ b/drivers/rtc/rtc-cmos.c > @@ -37,6 +37,8 @@ > #include <linux/mod_devicetable.h> > #include <linux/log2.h> > #include <linux/pm.h> > +#include <linux/of.h> > +#include <linux/of_platform.h> > > /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */ > #include <asm-generic/rtc.h> > @@ -1123,6 +1125,46 @@ static struct pnp_driver cmos_pnp_driver = { > > #endif /* CONFIG_PNP */ > > +#ifdef CONFIG_OF > +static const struct of_device_id of_cmos_match[] = { > + { > + .compatible = "motorola,mc146818", > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, of_cmos_match); > + > +static __init void cmos_of_init(struct platform_device *pdev) > +{ > + struct device_node *node = pdev->dev.of_node; > + struct rtc_time time; > + int ret; > + const __be32 *val; > + > + if (!node) > + return; > + > + val = of_get_property(node, "ctrl-reg", NULL); > + if (val) > + CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL); > + > + val = of_get_property(node, "freq-reg", NULL); > + if (val) > + CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT); > + > + get_rtc_time(&time); > + ret = rtc_valid_tm(&time); > + if (ret) { > + struct rtc_time def_time = { > + .tm_year = 1, > + .tm_mday = 1, > + }; > + set_rtc_time(&def_time); > + } > +} > +#else > +static inline void cmos_of_init(struct platform_device *pdev) {} > +#endif > /*----------------------------------------------------------------*/ > > /* Platform setup should have set up an RTC device, when PNP is > @@ -1131,6 +1173,7 @@ static struct pnp_driver cmos_pnp_driver = { > > static int __init cmos_platform_probe(struct platform_device *pdev) > { > + cmos_of_init(pdev); > cmos_wake_setup(&pdev->dev); > return cmos_do_probe(&pdev->dev, > platform_get_resource(pdev, IORESOURCE_IO, 0), > @@ -1162,6 +1205,9 @@ static struct platform_driver cmos_platform_driver = { > #ifdef CONFIG_PM > .pm = &cmos_pm_ops, > #endif > +#if defined(CONFIG_OF) > + .of_match_table = of_cmos_match, > +#endif The #if defined(CONFIG_OF) is no longer necessary around .of_match_table, particularly if you have a #else above that #defines of_cmos_match to NULL. > } > }; > > -- > 1.7.3.2 > > _______________________________________________ > devicetree-discuss mailing list > devicetree-discuss@lists.ozlabs.org > https://lists.ozlabs.org/listinfo/devicetree-discuss
* Grant Likely | 2011-02-16 15:11:08 [-0700]: >> diff --git a/Documentation/powerpc/dts-bindings/rtc-cmos.txt b/Documentation/powerpc/dts-bindings/rtc-cmos.txt >> new file mode 100644 >> index 0000000..7382989 >> --- /dev/null >> +++ b/Documentation/powerpc/dts-bindings/rtc-cmos.txt > >Move to Documentation/devicetree/bindings/rtc/ moved. >> diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c >> index c7ff8df..2709e00 100644 >> --- a/drivers/rtc/rtc-cmos.c >> +++ b/drivers/rtc/rtc-cmos.c >> @@ -1162,6 +1205,9 @@ static struct platform_driver cmos_platform_driver = { >> #ifdef CONFIG_PM >> .pm = &cmos_pm_ops, >> #endif >> +#if defined(CONFIG_OF) >> + .of_match_table = of_cmos_match, >> +#endif > >The #if defined(CONFIG_OF) is no longer necessary around >.of_match_table, particularly if you have a #else above that #defines >of_cmos_match to NULL. Kinda does not work. I get here: |drivers/rtc/rtc-cmos.c:1209:3: error: unknown field â of_match_tableâ specified in initializer I rebased on top of -rc5. Is this something new you describing? Sebastian
On Thu, Feb 17, 2011 at 6:26 AM, Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote: > * Grant Likely | 2011-02-16 15:11:08 [-0700]: > >>> diff --git a/Documentation/powerpc/dts-bindings/rtc-cmos.txt b/Documentation/powerpc/dts-bindings/rtc-cmos.txt >>> new file mode 100644 >>> index 0000000..7382989 >>> --- /dev/null >>> +++ b/Documentation/powerpc/dts-bindings/rtc-cmos.txt >> >>Move to Documentation/devicetree/bindings/rtc/ > moved. > >>> diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c >>> index c7ff8df..2709e00 100644 >>> --- a/drivers/rtc/rtc-cmos.c >>> +++ b/drivers/rtc/rtc-cmos.c >>> @@ -1162,6 +1205,9 @@ static struct platform_driver cmos_platform_driver = { >>> #ifdef CONFIG_PM >>> .pm = &cmos_pm_ops, >>> #endif >>> +#if defined(CONFIG_OF) >>> + .of_match_table = of_cmos_match, >>> +#endif >> >>The #if defined(CONFIG_OF) is no longer necessary around >>.of_match_table, particularly if you have a #else above that #defines >>of_cmos_match to NULL. > > Kinda does not work. I get here: > |drivers/rtc/rtc-cmos.c:1209:3: error: unknown field â of_match_tableâ specified in initializer > > I rebased on top of -rc5. Is this something new you describing? Base your patch on top of my devicetree/next branch. That's the branch that tglx will be applying them on top of them to get your changes to generic pci dt support code. g.
diff --git a/Documentation/powerpc/dts-bindings/rtc-cmos.txt b/Documentation/powerpc/dts-bindings/rtc-cmos.txt new file mode 100644 index 0000000..7382989 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/rtc-cmos.txt @@ -0,0 +1,28 @@ + Motorola mc146818 compatible RTC +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Required properties: + - compatible : "motorola,mc146818" + - reg : should contain registers location and length. + +Optional properties: + - interrupts : should contain interrupt. + - interrupt-parent : interrupt source phandle. + - ctrl-reg : Contains the initial value of the control register also + called "Register B". + - freq-reg : Contains the initial value of the frequency register also + called "Regsiter A". + +"Register A" and "B" are usually initialized by the firmware (BIOS for +instance). If this is not done, it can be performed by the driver. + +ISA Example: + + rtc@70 { + compatible = "motorola,mc146818"; + interrupts = <8 3>; + interrupt-parent = <&ioapic1>; + ctrl-reg = <2>; + freq-reg = <0x26>; + reg = <1 0x70 2>; + }; diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index c7ff8df..2709e00 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -37,6 +37,8 @@ #include <linux/mod_devicetable.h> #include <linux/log2.h> #include <linux/pm.h> +#include <linux/of.h> +#include <linux/of_platform.h> /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */ #include <asm-generic/rtc.h> @@ -1123,6 +1125,46 @@ static struct pnp_driver cmos_pnp_driver = { #endif /* CONFIG_PNP */ +#ifdef CONFIG_OF +static const struct of_device_id of_cmos_match[] = { + { + .compatible = "motorola,mc146818", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_cmos_match); + +static __init void cmos_of_init(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct rtc_time time; + int ret; + const __be32 *val; + + if (!node) + return; + + val = of_get_property(node, "ctrl-reg", NULL); + if (val) + CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL); + + val = of_get_property(node, "freq-reg", NULL); + if (val) + CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT); + + get_rtc_time(&time); + ret = rtc_valid_tm(&time); + if (ret) { + struct rtc_time def_time = { + .tm_year = 1, + .tm_mday = 1, + }; + set_rtc_time(&def_time); + } +} +#else +static inline void cmos_of_init(struct platform_device *pdev) {} +#endif /*----------------------------------------------------------------*/ /* Platform setup should have set up an RTC device, when PNP is @@ -1131,6 +1173,7 @@ static struct pnp_driver cmos_pnp_driver = { static int __init cmos_platform_probe(struct platform_device *pdev) { + cmos_of_init(pdev); cmos_wake_setup(&pdev->dev); return cmos_do_probe(&pdev->dev, platform_get_resource(pdev, IORESOURCE_IO, 0), @@ -1162,6 +1205,9 @@ static struct platform_driver cmos_platform_driver = { #ifdef CONFIG_PM .pm = &cmos_pm_ops, #endif +#if defined(CONFIG_OF) + .of_match_table = of_cmos_match, +#endif } };