| Message ID | 1524561891-2704-1-git-send-email-narmstrong@baylibre.com |
|---|---|
| State | Changes Requested |
| Delegated to: | Jagannadha Sutradharudu Teki |
| Headers | show |
| Series | [U-Boot] sunxi: Add support for Libre Computer Board ALL-H3-CC H5 ver. | expand |
On Tue, Apr 24, 2018 at 11:24:51AM +0200, Neil Armstrong wrote: > The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry > Pi B+ form factor single board computer based on the Allwinner H3 or H5 SoC. > The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes > and connectors are in the exact same position as on the Raspberry Pi B+. > > This patch adds defconfig and dts files for the H5 variant of the same board. > The dts file simply includes the H3 variant since the board is the same. > > The defconfig is based on the H3 variant and adapted to build for the H5. > > This follows the corresponding Linux patchset at [1]. > > [1] http://lkml.kernel.org/r/1524561576-2201-1-git-send-email-narmstrong@baylibre.com > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Commit log should be wrapped at 75 chars. > --- > arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts | 12 ++++++++++++ > configs/libretech_all_h3_cc_h5_defconfig | 17 +++++++++++++++++ > 2 files changed, 29 insertions(+) > create mode 100644 arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts > create mode 100644 configs/libretech_all_h3_cc_h5_defconfig > > diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts > new file mode 100644 > index 0000000..a72b0a3 > --- /dev/null > +++ b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts > @@ -0,0 +1,12 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2018 BayLibre, SAS > + * Author: Neil Armstrong <narmstrong@baylibre.com> > + */ > + > +#include "sun8i-h3-libretech-all-h3-cc.dts" > + > +/ { > + model = "Libre Computer Board ALL-H3-CC H5"; > + compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5"; > +}; The DT will not be correct in that case, especially the CPU node. Why not using the same DT than Linux? Maxime
diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts new file mode 100644 index 0000000..a72b0a3 --- /dev/null +++ b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "sun8i-h3-libretech-all-h3-cc.dts" + +/ { + model = "Libre Computer Board ALL-H3-CC H5"; + compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5"; +}; diff --git a/configs/libretech_all_h3_cc_h5_defconfig b/configs/libretech_all_h3_cc_h5_defconfig new file mode 100644 index 0000000..8e5021d --- /dev/null +++ b/configs/libretech_all_h3_cc_h5_defconfig @@ -0,0 +1,17 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN50I_H5=y +CONFIG_DRAM_CLK=672 +CONFIG_DRAM_ZQ=3881979 +CONFIG_DRAM_ODT_EN=y +CONFIG_R_I2C_ENABLE=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h3-cc" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C_SUPPORT=y +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry Pi B+ form factor single board computer based on the Allwinner H3 or H5 SoC. The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes and connectors are in the exact same position as on the Raspberry Pi B+. This patch adds defconfig and dts files for the H5 variant of the same board. The dts file simply includes the H3 variant since the board is the same. The defconfig is based on the H3 variant and adapted to build for the H5. This follows the corresponding Linux patchset at [1]. [1] http://lkml.kernel.org/r/1524561576-2201-1-git-send-email-narmstrong@baylibre.com Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts | 12 ++++++++++++ configs/libretech_all_h3_cc_h5_defconfig | 17 +++++++++++++++++ 2 files changed, 29 insertions(+) create mode 100644 arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts create mode 100644 configs/libretech_all_h3_cc_h5_defconfig