@@ -9,6 +9,10 @@
* auto-placement support, read-while load support, various fixes
* Copyright (C) Nokia Corporation, 2007
*
+ * Vishak G <vishak.g@samsung.com>, Rohit Hagargundgi <h.rohit@samsung.com>
+ * Flex-OneNAND support
+ * Copyright (C) Samsung Electronics, 2008
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -27,6 +31,37 @@
#include <asm/io.h>
+static int boundary[] = {
+ FLEXONENAND_DIE0_BOUNDARY,
+ FLEXONENAND_DIE1_BOUNDARY,
+};
+
+static int lock[] = {
+ FLEXONENAND_DIE0_ISLOCKED,
+ FLEXONENAND_DIE1_ISLOCKED,
+};
+
+/**
+ * onenand_oob_128 - oob info for Flex-Onenand with 4KB page
+ */
+static struct nand_ecclayout onenand_oob_128 = {
+ .eccbytes = 80,
+ .eccpos = {
+ 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+ 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
+ 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
+ 102, 103, 104, 105, 106, 107, 108, 109, 110, 111,
+ 118, 119, 120, 121, 122, 123, 124, 125, 126, 127
+ },
+ .oobfree = {
+ {2, 4}, {16, 6}, {32, 6}, {48, 6},
+ {64, 6}, {80, 6}, {96, 6}, {112, 6}
+ }
+};
+
/**
* onenand_oob_64 - oob info for large (2KB) page
*/
@@ -65,6 +100,14 @@
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 80 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 96 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 112 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 128 */
};
/**
@@ -171,6 +214,47 @@
}
/**
+ * onenand_get_block - For given address return block number and if slc
+ * @param mtd - MTD device structure
+ * @param addr - Address for which block number is needed
+ * @return isblkslc - Block is an SLC block or not
+ */
+unsigned onenand_get_block(struct mtd_info *mtd, loff_t addr,
+ unsigned *isblkslc)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned boundary, blk, die = 0;
+
+ if (!FLEXONENAND(this))
+ return addr >> this->erase_shift;
+
+ if (this->chipsize == 0) {
+ /* We have been called by flexonenand_get_boundary.
+ * addr contains die index in this case.
+ */
+ blk = addr * this->density_mask;
+ return blk;
+ }
+
+ if (addr >= this->diesize[0]) {
+ die = 1;
+ addr -= this->diesize[0];
+ }
+
+ boundary = this->boundary[die];
+
+ blk = addr >> (this->erase_shift - 1);
+ if (blk > boundary)
+ blk = (blk + boundary + 1) >> 1;
+
+ if (isblkslc)
+ *isblkslc = (blk <= boundary) ? 1 : 0;
+
+ blk += die ? this->density_mask : 0;
+ return blk;
+}
+
+/**
* onenand_get_density - [DEFAULT] Get OneNAND density
* @param dev_id OneNAND device ID
*
@@ -196,6 +280,7 @@
{
struct onenand_chip *this = mtd->priv;
int value, block, page;
+ unsigned slc = 0;
/* Address translation */
switch (cmd) {
@@ -207,15 +292,16 @@
page = -1;
break;
+ case FLEXONENAND_CMD_PI_ACCESS:
case ONENAND_CMD_ERASE:
case ONENAND_CMD_BUFFERRAM:
case ONENAND_CMD_OTP_ACCESS:
- block = (int) (addr >> this->erase_shift);
+ block = onenand_get_block(mtd, addr, NULL);
page = -1;
break;
default:
- block = (int) (addr >> this->erase_shift);
+ block = onenand_get_block(mtd, addr, &slc);
page = (int) (addr >> this->page_shift);
if (ONENAND_IS_2PLANE(this)) {
@@ -227,6 +313,8 @@
page >>= 1;
}
page &= this->page_mask;
+ if (FLEXONENAND(this) && slc)
+ page &= (this->page_mask >> 1);
break;
}
@@ -236,7 +324,7 @@
value = onenand_bufferram_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
- if (ONENAND_IS_2PLANE(this))
+ if (ONENAND_IS_MLC(this) || ONENAND_IS_2PLANE(this))
/* It is always BufferRAM0 */
ONENAND_SET_BUFFERRAM0(this);
else
@@ -258,13 +346,18 @@
if (page != -1) {
/* Now we use page size operation */
- int sectors = 4, count = 4;
+ int sectors = 0, count = 0;
int dataram;
switch (cmd) {
+ case FLEXONENAND_CMD_RECOVER_LSB:
case ONENAND_CMD_READ:
case ONENAND_CMD_READOOB:
- dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
+ if (ONENAND_IS_MLC(this))
+ /* It is always BufferRAM0 */
+ dataram = ONENAND_SET_BUFFERRAM0(this);
+ else
+ dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
break;
default:
@@ -293,6 +386,31 @@
}
/**
+ * onenand_read_ecc - return ecc status
+ * @param mtd MTD device structure
+ */
+int onenand_read_ecc(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ int ecc[4];
+ int i, result = 0;
+
+ for (i = 0; i < 4; i++) {
+ ecc[i] = this->read_word(this->base +
+ (ONENAND_REG_ECC_STATUS + i));
+ if (!FLEXONENAND(this))
+ return ecc[i];
+ if (ecc[i] & FLEXONENAND_UNCORRECTABLE_ERROR) {
+ result = ONENAND_ECC_2BIT_ALL;
+ break;
+ } else if (ecc[i])
+ result = ONENAND_ECC_1BIT_ALL;
+ }
+
+ return result;
+}
+
+/**
* onenand_wait - [DEFAULT] wait until the command is done
* @param mtd MTD device structure
* @param state state to select the max. timeout value
@@ -331,7 +449,7 @@
* power off recovery (POR) test, it should read ECC status first
*/
if (interrupt & ONENAND_INT_READ) {
- int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+ int ecc = onenand_read_ecc(mtd);
if (ecc) {
if (ecc & ONENAND_ECC_2BIT_ALL) {
printk(KERN_ERR "onenand_wait: ECC error = 0x%04x\n", ecc);
@@ -656,7 +774,7 @@
if (found && ONENAND_IS_DDP(this)) {
/* Select DataRAM for DDP */
- int block = (int) (addr >> this->erase_shift);
+ int block = onenand_get_block(mtd, addr, NULL);
int value = onenand_bufferram_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
}
@@ -816,6 +934,43 @@
}
/**
+ * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data
+ * @param mtd MTD device structure
+ * @param addr address to recover
+ * @param status return value from onenand_wait / onenand_bbt_wait
+ *
+ * Issue recovery command when read fails on MLC area.
+ */
+static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned slc = 0;
+
+ /* Recovery is only for Flex-OneNAND */
+ if (!FLEXONENAND(this))
+ return status;
+
+ /* check if we failed due to uncorrectable error */
+ if (status != (-EBADMSG) && status != (ONENAND_BBT_READ_ECC_ERROR))
+ return status;
+
+ /* check if address lies in MLC region */
+ onenand_get_block(mtd, addr, &slc);
+ if (slc)
+ return status;
+
+ /* We are attempting to reread, so decrement stats.failed
+ * which was incremented by onenand_wait due to read failure
+ */
+ printk(KERN_DEBUG "Attempting to recover from uncorrectable read\n");
+ mtd->ecc_stats.failed--;
+
+ /* Issue the LSB page recovery command */
+ this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize);
+ return this->wait(mtd, FL_READING);
+}
+
+/**
* onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band
* @param mtd MTD device structure
* @param from offset to read from
@@ -857,12 +1012,14 @@
stats = mtd->ecc_stats;
/* Read-while-load method */
+ /* Note: We can't use this feature in MLC */
/* Do first load to bufferRAM */
if (read < len) {
if (!onenand_check_bufferram(mtd, from)) {
this->command(mtd, ONENAND_CMD_READ, from, writesize);
ret = this->wait(mtd, FL_READING);
+ ret = ret ? onenand_recover_lsb(mtd, from, ret) : ret;
onenand_update_bufferram(mtd, from, !ret);
if (ret == -EBADMSG)
ret = 0;
@@ -877,7 +1034,7 @@
while (!ret) {
/* If there is more to load then start next load */
from += thislen;
- if (read + thislen < len) {
+ if (!ONENAND_IS_MLC(this) && read + thislen < len) {
this->command(mtd, ONENAND_CMD_READ, from, writesize);
/*
* Chip boundary handling in DDP
@@ -909,6 +1066,15 @@
oobcolumn = 0;
}
+ if (ONENAND_IS_MLC(this) && (read + thislen < len)) {
+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
+ ret = this->wait(mtd, FL_READING);
+ ret = ret ? onenand_recover_lsb(mtd, from, ret) : ret;
+ onenand_update_bufferram(mtd, from, !ret);
+ if (ret == -EBADMSG)
+ ret = 0;
+ }
+
/* See if we are done */
read += thislen;
if (read == len)
@@ -916,16 +1082,19 @@
/* Set up for next read from bufferRAM */
if (unlikely(boundary))
this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
- ONENAND_SET_NEXT_BUFFERRAM(this);
+ if (!ONENAND_IS_MLC(this))
+ ONENAND_SET_NEXT_BUFFERRAM(this);
buf += thislen;
thislen = min_t(int, writesize, len - read);
column = 0;
cond_resched();
- /* Now wait for load */
- ret = this->wait(mtd, FL_READING);
- onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
- ret = 0;
+ if (!ONENAND_IS_MLC(this)) {
+ /* Now wait for load in SLC */
+ ret = this->wait(mtd, FL_READING);
+ onenand_update_bufferram(mtd, from, !ret);
+ if (ret == -EBADMSG)
+ ret = 0;
+ }
}
/*
@@ -962,7 +1131,7 @@
size_t len = ops->ooblen;
mtd_oob_mode_t mode = ops->mode;
u_char *buf = ops->oobbuf;
- int ret = 0;
+ int ret = 0, readcmd;
from += ops->ooboffs;
@@ -993,17 +1162,21 @@
stats = mtd->ecc_stats;
+ readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
while (read < len) {
cond_resched();
thislen = oobsize - column;
thislen = min_t(int, thislen, len);
- this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
+ this->command(mtd, readcmd, from, mtd->oobsize);
onenand_update_bufferram(mtd, from, 0);
ret = this->wait(mtd, FL_READING);
+ ret = ret ? onenand_recover_lsb(mtd, from, ret) : ret;
+
if (ret && ret != -EBADMSG) {
printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret);
break;
@@ -1128,11 +1301,11 @@
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
if (interrupt & ONENAND_INT_READ) {
- int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+ int ecc = onenand_read_ecc(mtd);
if (ecc & ONENAND_ECC_2BIT_ALL) {
printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x"
", controller error 0x%04x\n", ecc, ctrl);
- return ONENAND_BBT_READ_ERROR;
+ return ONENAND_BBT_READ_ECC_ERROR;
}
} else {
printk(KERN_ERR "onenand_bbt_wait: read timeout!"
@@ -1163,7 +1336,7 @@
{
struct onenand_chip *this = mtd->priv;
int read = 0, thislen, column;
- int ret = 0;
+ int ret = 0, readcmd;
size_t len = ops->ooblen;
u_char *buf = ops->oobbuf;
@@ -1183,17 +1356,21 @@
column = from & (mtd->oobsize - 1);
+ readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
while (read < len) {
cond_resched();
thislen = mtd->oobsize - column;
thislen = min_t(int, thislen, len);
- this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
+ this->command(mtd, readcmd, from, mtd->oobsize);
onenand_update_bufferram(mtd, from, 0);
ret = onenand_bbt_wait(mtd, FL_READING);
+ ret = ret ? onenand_recover_lsb(mtd, from, ret) : ret;
+
if (ret)
break;
@@ -1230,9 +1407,11 @@
{
struct onenand_chip *this = mtd->priv;
u_char *oob_buf = this->oob_buf;
- int status, i;
+ int status, i, readcmd;
- this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
+ readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
+ this->command(mtd, readcmd, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
status = this->wait(mtd, FL_READING);
if (status)
@@ -1586,7 +1765,7 @@
{
struct onenand_chip *this = mtd->priv;
int column, ret = 0, oobsize;
- int written = 0;
+ int written = 0, oobcmd;
u_char *oobbuf;
size_t len = ops->ooblen;
const u_char *buf = ops->oobbuf;
@@ -1628,6 +1807,8 @@
oobbuf = this->oob_buf;
+ oobcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB;
+
/* Loop until all data write */
while (written < len) {
int thislen = min_t(int, oobsize, len - written);
@@ -1645,7 +1826,14 @@
memcpy(oobbuf + column, buf, thislen);
this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
- this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
+ if (ONENAND_IS_MLC(this)) {
+ /* Set main area of DataRAM to 0xff*/
+ memset(this->page_buf, 0xff, mtd->writesize);
+ this->write_bufferram(mtd, ONENAND_DATARAM,
+ this->page_buf, 0, mtd->writesize);
+ }
+
+ this->command(mtd, oobcmd, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
if (ONENAND_IS_2PLANE(this)) {
@@ -1770,11 +1958,32 @@
unsigned int block_size;
loff_t addr;
int len;
- int ret = 0;
+ int ret = 0, i = 0;
DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
- block_size = (1 << this->erase_shift);
+ /* Do not allow erase past end of device */
+ if (unlikely((instr->len + instr->addr) > mtd->size)) {
+ printk(KERN_ERR "onenand_erase: Erase past end of device\n");
+ return -EINVAL;
+ }
+
+ if (FLEXONENAND(this) && (mtd->numeraseregions > 1)) {
+ /* Find the eraseregion of this address */
+ for (; i < mtd->numeraseregions &&
+ instr->addr >= mtd->eraseregions[i].offset; i++)
+ ;
+ i--;
+ block_size = mtd->eraseregions[i].erasesize;
+
+ /* Start address should be aligned on erase region boundary */
+ if (unlikely((instr->addr - mtd->eraseregions[i].offset) &
+ (block_size - 1))) {
+ printk(KERN_ERR "onenand_erase: Unaligned address\n");
+ return -EINVAL;
+ }
+ } else
+ block_size = mtd->erasesize;
/* Start address must align on block boundary */
if (unlikely(instr->addr & (block_size - 1))) {
@@ -1788,12 +1997,6 @@
return -EINVAL;
}
- /* Do not allow erase past end of device */
- if (unlikely((instr->len + instr->addr) > mtd->size)) {
- printk(KERN_ERR "onenand_erase: Erase past end of device\n");
- return -EINVAL;
- }
-
instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
/* Grab the lock and see if the device is available */
@@ -1822,7 +2025,8 @@
ret = this->wait(mtd, FL_ERASING);
/* Check, if it is write protected */
if (ret) {
- printk(KERN_ERR "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
+ printk(KERN_ERR "onenand_erase: Failed erase, block %d\n",
+ (unsigned)onenand_get_block(mtd, addr, NULL));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = addr;
goto erase_exit;
@@ -1830,6 +2034,19 @@
len -= block_size;
addr += block_size;
+ if (FLEXONENAND(this) && (mtd->numeraseregions > 1)) {
+ if ((i < (mtd->numeraseregions - 1)) &&
+ (addr == mtd->eraseregions[i + 1].offset))
+ i++;
+ block_size = mtd->eraseregions[i].erasesize;
+ if (len & (block_size - 1)) {
+ /* This should be handled at MTD partitioning
+ * level.
+ */
+ printk(KERN_ERR "onenand_erase: Unaligned address\n");
+ goto erase_exit;
+ }
+ }
}
instr->state = MTD_ERASE_DONE;
@@ -1908,13 +2125,17 @@
int block;
/* Get block number */
- block = ((int) ofs) >> bbm->bbt_erase_shift;
+ block = onenand_get_block(mtd, ofs, NULL);
if (bbm->bbt)
bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
/* We write two bytes, so we dont have to mess with 16 bit access */
ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
- return onenand_write_oob_nolock(mtd, ofs, &ops);
+ /* FIXME : What to do when marking SLC block in partition
+ * with MLC erasesize? For now, it is not advisable to
+ * create partitions containing both SLC and MLC regions.
+ */
+ return onenand_write_oob_nolock(mtd, ofs, &ops);
}
/**
@@ -1958,8 +2179,8 @@
int start, end, block, value, status;
int wp_status_mask;
- start = ofs >> this->erase_shift;
- end = len >> this->erase_shift;
+ start = onenand_get_block(mtd, ofs, NULL);
+ end = onenand_get_block(mtd, ofs + len, NULL) - 1;
if (cmd == ONENAND_CMD_LOCK)
wp_status_mask = ONENAND_WP_LS;
@@ -1971,7 +2192,8 @@
/* Set start block address */
this->write_word(start, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
/* Set end block address */
- this->write_word(start + end - 1, this->base + ONENAND_REG_END_BLOCK_ADDRESS);
+ this->write_word(end, this->base +
+ ONENAND_REG_END_BLOCK_ADDRESS);
/* Write lock command */
this->command(mtd, cmd, 0, 0);
@@ -1992,7 +2214,7 @@
}
/* Block lock scheme */
- for (block = start; block < start + end; block++) {
+ for (block = start; block < end + 1; block++) {
/* Set block address */
value = onenand_block_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
@@ -2086,7 +2308,6 @@
return 0;
}
}
-
return 1;
}
@@ -2131,6 +2352,28 @@
onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
}
+/**
+ * flexonenand_unlock_all - [Flex-OneNAND Interface] unlock all blocks
+ * @param mtd MTD device structure
+ *
+ * Unlock all blocks
+ */
+static int flexonenand_unlock_all(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ size_t len = mtd->erasesize;
+
+ if (mtd->numeraseregions > 1)
+ len >>= 1;
+
+ onenand_do_lock_cmd(mtd, 0, len, ONENAND_CMD_UNLOCK_ALL);
+ if (ONENAND_IS_DDP(this))
+ onenand_do_lock_cmd(mtd, this->diesize[0], len,
+ ONENAND_CMD_UNLOCK_ALL);
+ onenand_check_lock_status(this);
+ return 0;
+}
+
#ifdef CONFIG_MTD_ONENAND_OTP
/* Interal OTP operation */
@@ -2230,21 +2473,30 @@
size_t *retlen, u_char *buf)
{
struct onenand_chip *this = mtd->priv;
- struct mtd_oob_ops ops = {
- .mode = MTD_OOB_PLACE,
- .ooblen = len,
- .oobbuf = buf,
- .ooboffs = 0,
- };
+ struct mtd_oob_ops ops;
int ret;
+ if (FLEXONENAND(this)) {
+ ops.len = mtd->writesize;
+ ops.ooblen = 0;
+ ops.datbuf = buf;
+ ops.oobbuf = NULL;
+ } else {
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooblen = len;
+ ops.oobbuf = buf;
+ ops.ooboffs = 0;
+ }
+
/* Enter OTP access mode */
this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
this->wait(mtd, FL_OTPING);
- ret = onenand_write_oob_nolock(mtd, from, &ops);
+ ret = FLEXONENAND(this) ?
+ onenand_write_ops_nolock(mtd, (mtd->writesize * 49), &ops)
+ : onenand_write_oob_nolock(mtd, from, &ops);
- *retlen = ops.oobretlen;
+ *retlen = FLEXONENAND(this) ? ops.retlen : ops.oobretlen;
/* Exit OTP access mode */
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
@@ -2428,25 +2680,32 @@
size_t len)
{
struct onenand_chip *this = mtd->priv;
- u_char *oob_buf = this->oob_buf;
+ u_char *oob_buf = FLEXONENAND(this) ? this->page_buf : this->oob_buf;
size_t retlen;
int ret;
- memset(oob_buf, 0xff, mtd->oobsize);
+ memset(oob_buf, 0xff, FLEXONENAND(this) ? this->writesize
+ : mtd->oobsize);
/*
* Note: OTP lock operation
* OTP block : 0xXXFC
* 1st block : 0xXXF3 (If chip support)
* Both : 0xXXF0 (If chip support)
*/
- oob_buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC;
+ if (FLEXONENAND(this))
+ oob_buf[FLEXONENAND_OTP_LOCK_OFFSET] = 0xFC;
+ else
+ oob_buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC;
/*
* Write lock mark to 8th word of sector0 of page0 of the spare0.
* We write 16 bytes spare area instead of 2 bytes.
+ * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
+ * main area of page 49.
*/
+
from = 0;
- len = 16;
+ len = FLEXONENAND(this) ? mtd->writesize : 16;
ret = onenand_otp_walk(mtd, from, len, &retlen, oob_buf, do_otp_lock, MTD_OTP_USER);
@@ -2495,6 +2754,14 @@
break;
}
+ if (ONENAND_IS_MLC(this))
+ this->options &= ~ONENAND_HAS_2PLANE;
+
+ if (FLEXONENAND(this)) {
+ this->options &= ~ONENAND_HAS_CONT_LOCK;
+ this->options |= ONENAND_HAS_UNLOCK_ALL;
+ }
+
if (this->options & ONENAND_HAS_CONT_LOCK)
printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
if (this->options & ONENAND_HAS_UNLOCK_ALL)
@@ -2512,19 +2779,22 @@
*/
static void onenand_print_device_info(int device, int version)
{
- int vcc, demuxed, ddp, density;
+ int vcc, demuxed, ddp, density, flexonenand;
vcc = device & ONENAND_DEVICE_VCC_MASK;
demuxed = device & ONENAND_DEVICE_IS_DEMUX;
ddp = device & ONENAND_DEVICE_IS_DDP;
density = onenand_get_density(device);
- printk(KERN_INFO "%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
- demuxed ? "" : "Muxed ",
+ flexonenand = device & DEVICE_IS_FLEXONENAND;
+ printk(KERN_INFO "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
+ flexonenand ? "Flex-" : "",
+ demuxed ? "" : "Mux",
ddp ? "(DDP)" : "",
(16 << density),
vcc ? "2.65/3.3" : "1.8",
device);
- printk(KERN_INFO "OneNAND version = 0x%04x\n", version);
+ printk(KERN_INFO "%sOneNAND version = 0x%04x\n",
+ flexonenand ? "Flex-" : "", version);
}
static const struct onenand_manufacturers onenand_manuf_ids[] = {
@@ -2558,6 +2828,181 @@
}
/**
+* flexonenand_get_boundary - Reads the SLC boundary
+* @param onenand_info - onenand info structure
+**/
+static int flexonenand_get_boundary(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned die, bdry;
+ int ret, syscfg, locked;
+
+ /* Disable ECC */
+ syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
+ this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1);
+
+ for (die = 0; die < this->dies; die++) {
+ this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
+ this->wait(mtd, FL_SYNCING);
+
+ this->command(mtd, ONENAND_CMD_READ, die, 0);
+ ret = this->wait(mtd, FL_READING);
+
+ bdry = this->read_word(this->base + ONENAND_DATARAM);
+ locked = bdry >> FLEXONENAND_PI_UNLOCK_SHIFT;
+ locked = (locked == 0x3) ? 0 : 1;
+ this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
+ this->boundary_locked[die] = locked;
+ this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+ ret = this->wait(mtd, FL_RESETING);
+
+ printk(KERN_INFO "Die %d boundary: %d%s\n", die,
+ this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
+ }
+
+ /* Enable ECC */
+ this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
+ return 0;
+}
+
+/**
+ * get_flexonenand_size - Fill up fields in onenand_chip
+ * boundary[], diesize[], chipsize,
+ * boundary_locked[]
+ * @param mtd - MTD device structure
+ */
+void get_flexonenand_size(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ int die, ofs, i, eraseshift, density;
+ int blksperdie, maxbdry;
+
+ density = onenand_get_density(this->device_id);
+ blksperdie = ((16 << density) << 20) >> (this->erase_shift);
+ blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
+ maxbdry = blksperdie - 1;
+ eraseshift = this->erase_shift - 1;
+
+ this->chipsize = 0;
+ mtd->numeraseregions = this->dies << 1;
+
+ /* This fills up the device boundary */
+ flexonenand_get_boundary(mtd);
+ die = ofs = 0;
+ i = -1;
+ for (; die < this->dies; die++) {
+ if (!die || this->boundary[die-1] != maxbdry) {
+ i++;
+ mtd->eraseregions[i].offset = ofs;
+ mtd->eraseregions[i].erasesize = 1 << eraseshift;
+ mtd->eraseregions[i].numblocks =
+ this->boundary[die] + 1;
+ ofs += mtd->eraseregions[i].numblocks << eraseshift;
+ eraseshift++;
+ } else {
+ mtd->numeraseregions -= 1;
+ mtd->eraseregions[i].numblocks +=
+ this->boundary[die] + 1;
+ ofs += (this->boundary[die] + 1) << (eraseshift - 1);
+ }
+ if (this->boundary[die] != maxbdry) {
+ i++;
+ mtd->eraseregions[i].offset = ofs;
+ mtd->eraseregions[i].erasesize = 1 << eraseshift;
+ mtd->eraseregions[i].numblocks = maxbdry ^
+ this->boundary[die];
+ ofs += mtd->eraseregions[i].numblocks << eraseshift;
+ eraseshift--;
+ } else
+ mtd->numeraseregions -= 1;
+ }
+
+ mtd->erasesize = 1 << (this->erase_shift);
+ if (mtd->numeraseregions == 1)
+ mtd->erasesize >>= 1;
+
+ printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions);
+ for (i = 0; i < mtd->numeraseregions; i++)
+ printk(KERN_INFO "[offset: 0x%08x, erasesize: 0x%05x,"
+ " numblocks: %04u]\n", mtd->eraseregions[i].offset,
+ mtd->eraseregions[i].erasesize,
+ mtd->eraseregions[i].numblocks);
+
+ for (die = 0, mtd->size = 0; die < this->dies; die++) {
+ this->diesize[die] = (blksperdie << this->erase_shift);
+ this->diesize[die] -= (this->boundary[die] + 1)
+ << (this->erase_shift - 1);
+ mtd->size += this->diesize[die];
+ }
+
+ /* this->chipsize represents maximum possible chip size */
+ this->chipsize = (16 << density) << 20;
+}
+
+/**
+ * flexonenand_set_boundary - Writes the SLC boundary
+ * @param onenand_info - onenand info structure
+ */
+static int flexonenand_set_boundary(struct mtd_info *mtd, unsigned die,
+ int boundary, int lock)
+{
+ struct onenand_chip *this = mtd->priv;
+ int ret, density, blksperdie;
+ loff_t addr;
+
+ density = onenand_get_density(this->device_id);
+ blksperdie = ((16 << density) << 20) >> this->erase_shift;
+ blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
+
+ printk(KERN_INFO "Changing die %d boundary: %d%s\n", die, boundary,
+ lock ? "(Locked)" : "(Unlocked)");
+ if (boundary >= blksperdie) {
+ printk(KERN_ERR "Invalid boundary value.\
+ Boundary not changed.\n");
+ return -1;
+ }
+
+ if (this->boundary_locked[die]) {
+ printk(KERN_ERR "Die boundary is locked.\
+ Boundary not changed.\n");
+ return -1;
+ }
+
+ addr = die ? this->diesize[0] : 0;
+
+ boundary &= FLEXONENAND_PI_MASK;
+ boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT);
+
+ this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, addr, 0);
+ this->wait(mtd, FL_SYNCING);
+
+ this->command(mtd, ONENAND_CMD_ERASE, addr, 0);
+ this->wait(mtd, FL_ERASING);
+
+ this->write_word(boundary, this->base + ONENAND_DATARAM);
+ this->command(mtd, ONENAND_CMD_PROG, addr, 0);
+ ret = this->wait(mtd, FL_WRITING);
+ if (ret) {
+ printk(KERN_ERR "Failed PI write for Die %d\n", die);
+ goto out;
+ }
+
+ this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0);
+ ret = this->wait(mtd, FL_WRITING);
+ if (ret)
+ printk(KERN_ERR "Failed PI update for Die %d\n", die);
+ else
+ printk(KERN_INFO "Done\n");
+out:
+ this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND);
+ this->wait(mtd, FL_RESETING);
+ if (!ret)
+ /* Recalculate device size on boundary change*/
+ get_flexonenand_size(mtd);
+ return ret;
+}
+
+/**
* onenand_probe - [OneNAND Interface] Probe the OneNAND device
* @param mtd MTD device structure
*
@@ -2599,6 +3044,7 @@
maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
+ this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
/* Check OneNAND device */
if (maf_id != bram_maf_id || dev_id != bram_dev_id)
@@ -2610,20 +3056,34 @@
this->version_id = ver_id;
density = onenand_get_density(dev_id);
- this->chipsize = (16 << density) << 20;
+ if (FLEXONENAND(this)) {
+ this->dies = ONENAND_IS_DDP(this) ? 2 : 1;
+ /* Maximum possible erase regions */
+ mtd->numeraseregions = this->dies << 1;
+ mtd->eraseregions = kzalloc(sizeof(struct mtd_erase_region_info)
+ * (this->dies << 1), GFP_KERNEL);
+ if (!mtd->eraseregions)
+ return -ENOMEM;
+ }
+ this->chipsize = FLEXONENAND(this) ? 0 : (16 << density) << 20;
/* Set density mask. it is used for DDP */
if (ONENAND_IS_DDP(this))
- this->density_mask = (1 << (density + 6));
+ this->density_mask = (1 << (density +
+ (FLEXONENAND(this) ? 4 : 6)));
else
this->density_mask = 0;
/* OneNAND page size & block size */
/* The data buffer size is equal to page size */
mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
+ /* We use the full BufferRAM */
+ if (ONENAND_IS_MLC(this))
+ mtd->writesize <<= 1;
+
mtd->oobsize = mtd->writesize >> 5;
/* Pages per a block are always 64 in OneNAND */
mtd->erasesize = mtd->writesize << 6;
-
+ mtd->erasesize <<= FLEXONENAND(this) ? 1 : 0;
this->erase_shift = ffs(mtd->erasesize) - 1;
this->page_shift = ffs(mtd->writesize) - 1;
this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
@@ -2632,7 +3092,20 @@
/* REVIST: Multichip handling */
- mtd->size = this->chipsize;
+ if (FLEXONENAND(this)) {
+ unsigned die;
+
+ get_flexonenand_size(mtd);
+
+ /* Change the device boundaries if required */
+ for (die = 0; die < this->dies; die++)
+ if ((!this->boundary_locked[die]) &&
+ (boundary[die] >= 0) &&
+ (boundary[die] != this->boundary[die]))
+ flexonenand_set_boundary(mtd, die,
+ boundary[die], lock[die]);
+ } else
+ mtd->size = this->chipsize;
/* Check OneNAND features */
onenand_check_features(mtd);
@@ -2749,6 +3222,10 @@
* Allow subpage writes up to oobsize.
*/
switch (mtd->oobsize) {
+ case 128:
+ this->ecclayout = &onenand_oob_128;
+ mtd->subpage_sft = 0;
+ break;
case 64:
this->ecclayout = &onenand_oob_64;
mtd->subpage_sft = 2;
@@ -2768,6 +3245,10 @@
break;
}
+ /* Don't allow the sub-page write in MLC */
+ if (ONENAND_IS_MLC(this))
+ mtd->subpage_sft = 0;
+
this->subpagesize = mtd->writesize >> mtd->subpage_sft;
/*
@@ -2812,7 +3293,8 @@
mtd->owner = THIS_MODULE;
/* Unlock whole block */
- onenand_unlock_all(mtd);
+ FLEXONENAND(this) ? flexonenand_unlock_all(mtd)
+ : onenand_unlock_all(mtd);
return this->scan_bbt(mtd);
}
@@ -2843,6 +3325,8 @@
kfree(this->page_buf);
if (this->options & ONENAND_OOBBUF_ALLOC)
kfree(this->oob_buf);
+ if (FLEXONENAND(this))
+ kfree(mtd->eraseregions);
}
EXPORT_SYMBOL_GPL(onenand_scan);
@@ -60,6 +60,7 @@
struct bbm_info *bbm = this->bbm;
int i, j, numblocks, len, scanlen;
int startblock;
+ unsigned slc;
loff_t from;
size_t readlen, ooblen;
struct mtd_oob_ops ops;
@@ -76,7 +77,7 @@
/* Note that numblocks is 2 * (real numblocks) here;
* see i += 2 below as it makses shifting and masking less painful
*/
- numblocks = mtd->size >> (bbm->bbt_erase_shift - 1);
+ numblocks = this->chipsize >> (bbm->bbt_erase_shift - 1);
startblock = 0;
from = 0;
@@ -106,7 +107,13 @@
}
}
i += 2;
- from += (1 << bbm->bbt_erase_shift);
+ if (FLEXONENAND(this)) {
+ onenand_get_block(mtd, from, &slc);
+ from += (1 << bbm->bbt_erase_shift) >> 1;
+ if (!slc)
+ from += (1 << bbm->bbt_erase_shift) >> 1;
+ } else
+ from += (1 << bbm->bbt_erase_shift);
}
return 0;
@@ -143,7 +150,7 @@
uint8_t res;
/* Get block number * 2 */
- block = (int) (offs >> (bbm->bbt_erase_shift - 1));
+ block = (int) (onenand_get_block(mtd, offs, NULL) << 1);
res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
DEBUG(MTD_DEBUG_LEVEL2, "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
@@ -178,7 +185,7 @@
struct bbm_info *bbm = this->bbm;
int len, ret = 0;
- len = mtd->size >> (this->erase_shift + 2);
+ len = this->chipsize >> (this->erase_shift + 2);
/* Allocate memory (2bit per block) and clear the memory bad block table */
bbm->bbt = kzalloc(len, GFP_KERNEL);
if (!bbm->bbt) {
@@ -6,6 +6,10 @@
* Copyright © 2005-2007 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
+ * Vishak G <vishak.g@samsung.com>, Rohit Hagargundgi <h.rohit@samsung.com>
+ * Flex-OneNAND simulator support
+ * Copyright (C) Samsung Electronics, 2008
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -24,16 +28,38 @@
#ifndef CONFIG_ONENAND_SIM_MANUFACTURER
#define CONFIG_ONENAND_SIM_MANUFACTURER 0xec
#endif
+
#ifndef CONFIG_ONENAND_SIM_DEVICE_ID
#define CONFIG_ONENAND_SIM_DEVICE_ID 0x04
#endif
+
+#define CONFIG_FLEXONENAND ((CONFIG_ONENAND_SIM_DEVICE_ID >> 9) & 1)
+
#ifndef CONFIG_ONENAND_SIM_VERSION_ID
#define CONFIG_ONENAND_SIM_VERSION_ID 0x1e
#endif
+#ifndef CONFIG_ONENAND_SIM_TECHNOLOGY_ID
+#define CONFIG_ONENAND_SIM_TECHNOLOGY_ID CONFIG_FLEXONENAND
+#endif
+
+/* Initial boundary values for Flex-OneNAND Simulator */
+#ifndef CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY
+#define CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY 0x01
+#endif
+
+#ifndef CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY
+#define CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY 0x01
+#endif
+
static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER;
static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID;
static int version_id = CONFIG_ONENAND_SIM_VERSION_ID;
+static int technology_id = CONFIG_ONENAND_SIM_TECHNOLOGY_ID;
+static int boundary[] = {
+ CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY,
+ CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY,
+};
struct onenand_flash {
void __iomem *base;
@@ -57,12 +83,18 @@
(writew(v, this->base + ONENAND_REG_WP_STATUS))
/* It has all 0xff chars */
-#define MAX_ONENAND_PAGESIZE (2048 + 64)
+#define MAX_ONENAND_PAGESIZE (4096 + 128)
static unsigned char *ffchars;
+#if CONFIG_FLEXONENAND
+#define PARTITION_NAME "Flex-OneNAND simulator partition"
+#else
+#define PARTITION_NAME "OneNAND simulator partition"
+#endif
+
static struct mtd_partition os_partitions[] = {
{
- .name = "OneNAND simulator partition",
+ .name = PARTITION_NAME,
.offset = 0,
.size = MTDPART_SIZ_FULL,
},
@@ -104,6 +136,7 @@
switch (cmd) {
case ONENAND_CMD_UNLOCK:
+ case ONENAND_CMD_UNLOCK_ALL:
if (block_lock_scheme)
ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
else
@@ -228,10 +261,11 @@
{
struct mtd_info *mtd = &info->mtd;
struct onenand_flash *flash = this->priv;
- int main_offset, spare_offset;
+ int main_offset, spare_offset, die = 0;
void __iomem *src;
void __iomem *dest;
- unsigned int i;
+ unsigned int i, slc = 0;
+ static int pi_operation;
if (dataram) {
main_offset = mtd->writesize;
@@ -241,10 +275,27 @@
spare_offset = 0;
}
+ if (pi_operation) {
+ die = readw(this->base + ONENAND_REG_START_ADDRESS2);
+ die >>= ONENAND_DDP_SHIFT;
+ }
+
switch (cmd) {
+ case FLEXONENAND_CMD_PI_ACCESS:
+ pi_operation = 1;
+ break;
+
+ case ONENAND_CMD_RESET:
+ pi_operation = 0;
+ break;
+
case ONENAND_CMD_READ:
src = ONENAND_CORE(flash) + offset;
dest = ONENAND_MAIN_AREA(this, main_offset);
+ if (pi_operation) {
+ writew(boundary[die], this->base + ONENAND_DATARAM);
+ break;
+ }
memcpy(dest, src, mtd->writesize);
/* Fall through */
@@ -257,6 +308,10 @@
case ONENAND_CMD_PROG:
src = ONENAND_MAIN_AREA(this, main_offset);
dest = ONENAND_CORE(flash) + offset;
+ if (pi_operation) {
+ boundary[die] = readw(this->base + ONENAND_DATARAM);
+ break;
+ }
/* To handle partial write */
for (i = 0; i < (1 << mtd->subpage_sft); i++) {
int off = i * this->subpagesize;
@@ -284,9 +339,16 @@
break;
case ONENAND_CMD_ERASE:
+ if (pi_operation)
+ break;
+ onenand_get_block(mtd, offset, &slc);
+ if (slc && (mtd->numeraseregions > 1))
+ mtd->erasesize >>= 1;
memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize);
memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
(mtd->erasesize >> 5));
+ if (slc && (mtd->numeraseregions > 1))
+ mtd->erasesize <<= 1;
break;
default:
@@ -295,6 +357,29 @@
}
/**
+ * flexonenand_get_addr - Return address of the block
+ * @block: Block number on Flex-OneNAND
+ *
+ */
+loff_t flexonenand_get_addr(struct onenand_chip *this, int block)
+{
+ loff_t ofs;
+ int die = 0, boundary;
+
+ ofs = 0;
+ if (ONENAND_IS_DDP(this) && block >= this->density_mask) {
+ block -= this->density_mask;
+ die = 1;
+ ofs = this->diesize[0];
+ }
+ boundary = this->boundary[die];
+ ofs += block << (this->erase_shift - 1);
+ if (block > (boundary + 1))
+ ofs += (block - boundary - 1) << (this->erase_shift - 1);
+ return ofs;
+}
+
+/**
* onenand_command_handle - Handle command
* @this: OneNAND device structure
* @cmd: The command to be sent
@@ -338,8 +423,12 @@
break;
}
- if (block != -1)
- offset += block << this->erase_shift;
+ if (block != -1) {
+ if (FLEXONENAND(this))
+ offset = flexonenand_get_addr(this, block);
+ else
+ offset += block << this->erase_shift;
+ }
if (page != -1)
offset += page << this->page_shift;
@@ -390,6 +479,7 @@
}
density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+ density &= ONENAND_DEVICE_DENSITY_MASK;
size = ((16 << 20) << density);
ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
@@ -405,8 +495,9 @@
writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
+ writew(technology_id, flash->base + ONENAND_REG_TECHNOLOGY);
- if (density < 2)
+ if (density < 2 && (!CONFIG_FLEXONENAND))
buffer_size = 0x0400; /* 1KiB page */
else
buffer_size = 0x0800; /* 2KiB page */
@@ -17,8 +17,24 @@
#include <linux/mtd/onenand_regs.h>
#include <linux/mtd/bbm.h>
+#define MAX_DIES 2
#define MAX_BUFFERRAM 2
+/**
+ * FlexOneNAND device boundary setting
+ * Setting -1 will not change the boundary
+ */
+#define FLEXONENAND_DIE0_BOUNDARY -1
+#define FLEXONENAND_DIE1_BOUNDARY -1
+
+/**
+ * Setting value 1 locks the boundary
+ * WARNING : Once locked, the boundary cannot be changed.
+ * Use with care.
+ */
+#define FLEXONENAND_DIE0_ISLOCKED 0
+#define FLEXONENAND_DIE1_ISLOCKED 0
+
/* Scan and identify a OneNAND device */
extern int onenand_scan(struct mtd_info *mtd, int max_chips);
/* Free resources held by the OneNAND device */
@@ -51,6 +67,11 @@
/**
* struct onenand_chip - OneNAND Private Flash Chip Data
* @base: [BOARDSPECIFIC] address to access OneNAND
+ * @dies: [INTERN][FLEX-ONENAND] number of dies on chip
+ * @boundary: [INTERN][FLEX-ONENAND] Boundary of the dies
+ * @boundary_locked: [INTERN][FLEX-ONENAND] TRUE indicates die boundary
+ * is locked and cannot be changed
+ * @diesize: [INTERN][FLEX-ONENAND] Size of the dies
* @chipsize: [INTERN] the size of one chip for multichip arrays
* @device_id: [INTERN] device ID
* @density_mask: chip density, used for DDP devices
@@ -92,9 +113,14 @@
*/
struct onenand_chip {
void __iomem *base;
+ unsigned dies;
+ unsigned boundary[MAX_DIES];
+ unsigned int boundary_locked[MAX_DIES];
+ unsigned int diesize[MAX_DIES];
unsigned int chipsize;
unsigned int device_id;
unsigned int version_id;
+ unsigned int technology;
unsigned int density_mask;
unsigned int options;
@@ -145,6 +171,8 @@
#define ONENAND_SET_BUFFERRAM0(this) (this->bufferram_index = 0)
#define ONENAND_SET_BUFFERRAM1(this) (this->bufferram_index = 1)
+#define FLEXONENAND(this) \
+ (this->device_id & DEVICE_IS_FLEXONENAND)
#define ONENAND_GET_SYS_CFG1(this) \
(this->read_word(this->base + ONENAND_REG_SYS_CFG1))
#define ONENAND_SET_SYS_CFG1(v, this) \
@@ -153,6 +181,9 @@
#define ONENAND_IS_DDP(this) \
(this->device_id & ONENAND_DEVICE_IS_DDP)
+#define ONENAND_IS_MLC(this) \
+ (this->technology & ONENAND_TECHNOLOGY_IS_MLC)
+
#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM
#define ONENAND_IS_2PLANE(this) \
(this->options & ONENAND_HAS_2PLANE)
@@ -189,5 +220,7 @@
int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops);
+unsigned onenand_get_block(struct mtd_info *mtd, loff_t addr,
+ unsigned *isblkslc);
#endif /* __LINUX_MTD_ONENAND_H */
@@ -67,6 +67,9 @@
/*
* Device ID Register F001h (R)
*/
+#define DEVICE_IS_FLEXONENAND (1 << 9)
+#define FLEXONENAND_PI_MASK (0x3ff)
+#define FLEXONENAND_PI_UNLOCK_SHIFT (14)
#define ONENAND_DEVICE_DENSITY_MASK (0xf)
#define ONENAND_DEVICE_DENSITY_SHIFT (4)
#define ONENAND_DEVICE_IS_DDP (1 << 3)
@@ -84,6 +87,11 @@
#define ONENAND_VERSION_PROCESS_SHIFT (8)
/*
+ * Technology Register F006h (R)
+ */
+#define ONENAND_TECHNOLOGY_IS_MLC (1 << 0)
+
+/*
* Start Address 1 F100h (R/W) & Start Address 2 F101h (R/W)
*/
#define ONENAND_DDP_SHIFT (15)
@@ -93,7 +101,8 @@
/*
* Start Address 8 F107h (R/W)
*/
-#define ONENAND_FPA_MASK (0x3f)
+/* Note: It's actually 0x3f in case of SLC */
+#define ONENAND_FPA_MASK (0x7f)
#define ONENAND_FPA_SHIFT (2)
#define ONENAND_FSA_MASK (0x03)
@@ -105,7 +114,8 @@
#define ONENAND_BSA_BOOTRAM (0 << 2)
#define ONENAND_BSA_DATARAM0 (2 << 2)
#define ONENAND_BSA_DATARAM1 (3 << 2)
-#define ONENAND_BSC_MASK (0x03)
+/* Note: It's actually 0x03 in case of SLC */
+#define ONENAND_BSC_MASK (0x07)
/*
* Command Register F220h (R/W)
@@ -124,6 +134,9 @@
#define ONENAND_CMD_RESET (0xF0)
#define ONENAND_CMD_OTP_ACCESS (0x65)
#define ONENAND_CMD_READID (0x90)
+#define FLEXONENAND_CMD_PI_UPDATE (0x05)
+#define FLEXONENAND_CMD_PI_ACCESS (0x66)
+#define FLEXONENAND_CMD_RECOVER_LSB (0x05)
/* NOTE: Those are not *REAL* commands */
#define ONENAND_CMD_BUFFERRAM (0x1978)
@@ -190,10 +203,12 @@
#define ONENAND_ECC_1BIT_ALL (0x5555)
#define ONENAND_ECC_2BIT (1 << 1)
#define ONENAND_ECC_2BIT_ALL (0xAAAA)
+#define FLEXONENAND_UNCORRECTABLE_ERROR (0x1010)
/*
* One-Time Programmable (OTP)
*/
+#define FLEXONENAND_OTP_LOCK_OFFSET (2048)
#define ONENAND_OTP_LOCK_OFFSET (14)
#endif /* __ONENAND_REG_H */
@@ -102,7 +102,11 @@
uint32_t useecc;
uint32_t eccbytes;
uint32_t oobfree[8][2];
+#ifdef CONFIG_MTD_ONENAND
+ uint32_t eccpos[128];
+#else
uint32_t eccpos[32];
+#endif
};
struct nand_oobfree {
@@ -117,7 +121,11 @@
*/
struct nand_ecclayout {
uint32_t eccbytes;
+#ifdef CONFIG_MTD_ONENAND
+ uint32_t eccpos[128];
+#else
uint32_t eccpos[64];
+#endif
uint32_t oobavail;
struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
};
Hi All, We are happy to release Flex-OneNAND MTD to open source community. Brief description of Flex-OneNAND : Samsung Flex-OneNAND is a highly reliable embedded memory targeted for both consumer electronics, and next generation mobile phone market. With Samsung's accumulated NAND flash technologies over the last decade, Samsung designs an ideal single memory chip based on NAND architecture integrating SRAM buffers and logic interface. Samsung Flex-OneNAND takes both advantages from high-speed data read function of NOR flash and the advanced data storage function of NAND flash. Flex-OneNAND combines SLC and MLC technologies into a single device. SLC area provides increased reliability and speed, suitable for storing code and data, such as bootloader, kernel and root file system. MLC area provides high density and is best used for storing user data. Users can configure the size of SLC and MLC regions. Refer (http://www.samsung.com/global/business/semiconductor/products/fusionmemory/Products_FlexOneNAND.html) Existing MTD does not allow for erase regions with odd number of blocks(partitions turn read only). So it is better to set the die boundary to odd values. Die boundary setting can be done in include/mtd/onenand.h A partition, theoretically, can span across SLC and MLC regions. There is no apparent advantage with it however. Also, such a partition will have MLC erase size, with two SLC blocks erased at a time during operation. If the second block goes bad, we end up marking the first block as bad. So, again, it is not advisable to create partitions across erase regions. Apart from this patch, some more posts for Flex-OneNAND support are 1. JFFS2 [PATCH 1/1] [MTD] [JFFS2] MLC NAND support [PATCH 1/2] [MTD] [JFFS2] MLC NAND support 2. MTD-UTILS [PATCH] [MTD-UTILS] Add support for 4KB page flash devices 3. UBOOT [U-Boot] [PATCH] FlexOneNAND support in U-Boot (Posted in http://lists.denx.de/mailman/listinfo/u-boot) Signed-off-by: Vishak G <vishak.g@samsung.com> Signed-off-by: Rohit Hagargundgi <h.rohit@samsung.com>