diff mbox

[09/14] rx: Cleanup non-VOIDmode SETs.

Message ID E2CFE031-E16F-4325-BD54-24EE0EB0F648@comcast.net
State New
Headers show

Commit Message

Mike Stump Jan. 14, 2011, 6:27 p.m. UTC 
On Jan 14, 2011, at 8:08 AM, rth@redhat.com wrote:
> SET should always have VOIDmode.

If that is really true...  the below patch fixes all the remaining instances of this.

Ok?

Comments

Richard Henderson Jan. 14, 2011, 6:50 p.m. UTC | #1 
On 01/14/2011 10:27 AM, Mike Stump wrote:
> On Jan 14, 2011, at 8:08 AM, rth@redhat.com wrote:
>> SET should always have VOIDmode.
> 
> If that is really true...  the below patch fixes all the remaining instances of this.
> 
> Ok?
> 

Ok by me.


r~
diff mbox

Patch

Index: config/alpha/alpha.md
===================================================================
--- config/alpha/alpha.md	(revision 168796)
+++ config/alpha/alpha.md	(working copy)
@@ -6910,13 +6910,13 @@ 
 ;; Load the CIW into r2 for calling __T3E_MISMATCH
 
 (define_expand "umk_mismatch_args"
-  [(set:DI (match_dup 1) (mem:DI (plus:DI (reg:DI 15) (const_int -16))))
-   (set:DI (match_dup 2) (mem:DI (plus:DI (match_dup 1) (const_int -32))))
-   (set:DI (reg:DI 1) (match_operand:DI 0 "const_int_operand" ""))
-   (set:DI (match_dup 3) (plus:DI (mult:DI (reg:DI 25)
-					   (const_int 8))
-				  (match_dup 2)))
-   (set:DI (reg:DI 2) (mem:DI (match_dup 3)))]
+  [(set (match_dup 1) (mem:DI (plus:DI (reg:DI 15) (const_int -16))))
+   (set (match_dup 2) (mem:DI (plus:DI (match_dup 1) (const_int -32))))
+   (set (reg:DI 1) (match_operand:DI 0 "const_int_operand" ""))
+   (set (match_dup 3) (plus:DI (mult:DI (reg:DI 25)
+					(const_int 8))
+			       (match_dup 2)))
+   (set (reg:DI 2) (mem:DI (match_dup 3)))]
   "TARGET_ABI_UNICOSMK"
 {
   operands[1] = gen_reg_rtx (DImode);
Index: config/fr30/fr30.md
===================================================================
--- config/fr30/fr30.md	(revision 168797)
+++ config/fr30/fr30.md	(working copy)
@@ -140,16 +140,16 @@ 
 
 ;; Push a register onto the stack
 (define_insn "movsi_push"
-  [(set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-	   (match_operand:SI 0 "register_operand" "a"))]
+  [(set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 0 "register_operand" "a"))]
   ""
   "st	%0, @-r15"
 )
 
 ;; Pop a register off the stack
 (define_insn "movsi_pop"
-  [(set:SI (match_operand:SI 0 "register_operand" "=a")
-	   (mem:SI (post_inc:SI (reg:SI 15))))]
+  [(set (match_operand:SI 0 "register_operand" "=a")
+	(mem:SI (post_inc:SI (reg:SI 15))))]
   ""
   "ld	@r15+, %0"
 )
@@ -292,8 +292,8 @@ 
    "INTVAL (operands[1]) <= -1 && INTVAL (operands[1]) >= -128
     && (GET_CODE (operands[0]) != SUBREG
 	|| SCALAR_INT_MODE_P (GET_MODE (XEXP (operands[0], 0))))"
-   [(set:SI (match_dup 0) (match_dup 1))
-    (set:SI (match_dup 0) (sign_extend:SI (match_dup 2)))]
+   [(set (match_dup 0) (match_dup 1))
+    (set (match_dup 0) (sign_extend:SI (match_dup 2)))]
    "{
    operands[1] = GEN_INT (INTVAL (operands[1]) & 0xff);
    operands[2] = gen_lowpart (QImode, operands[0]);
@@ -307,8 +307,8 @@ 
   [(set (match_operand:SI 0 "register_operand"  "")
 	(match_operand:SI 1 "const_int_operand" ""))]
    "(INTVAL (operands[1]) < 0) && ((INTVAL (operands[1]) & 0x00ffffff) == 0)"
-   [(set:SI (match_dup 0) (match_dup 2))
-    (parallel [(set:SI (match_dup 0) (ashift:SI (match_dup 0) (const_int 24)))
+   [(set (match_dup 0) (match_dup 2))
+    (parallel [(set (match_dup 0) (ashift:SI (match_dup 0) (const_int 24)))
 	       (clobber (reg:CC 16))])]
    "{
    HOST_WIDE_INT val = INTVAL (operands[1]);
@@ -325,8 +325,8 @@ 
 	(match_operand:SI 1 "const_int_operand" ""))]
    "(INTVAL (operands[1]) > 0x00ffffff)
    && ((INTVAL (operands[1]) >> exact_log2 (INTVAL (operands[1]) & (- INTVAL (operands[1])))) < 0x100)"
-   [(set:SI (match_dup 0) (match_dup 2))
-    (parallel [(set:SI (match_dup 0) (ashift:SI (match_dup 0) (match_dup 3)))
+   [(set (match_dup 0) (match_dup 2))
+    (parallel [(set (match_dup 0) (ashift:SI (match_dup 0) (match_dup 3)))
 	       (clobber (reg:CC 16))])]
    "{
    HOST_WIDE_INT val = INTVAL (operands[1]);
@@ -417,108 +417,108 @@ 
 ;; is during function prologues and epilogues.
 
 (define_peephole
-  [(set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-	   (match_operand:SI 0 "high_register_operand" "h"))
-   (set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-           (match_operand:SI 1 "high_register_operand" "h"))
-   (set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-           (match_operand:SI 2 "high_register_operand" "h"))
-   (set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-           (match_operand:SI 3 "high_register_operand" "h"))]
+  [(set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 0 "high_register_operand" "h"))
+   (set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 1 "high_register_operand" "h"))
+   (set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 2 "high_register_operand" "h"))
+   (set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 3 "high_register_operand" "h"))]
   "fr30_check_multiple_regs (operands, 4, 1)"
   "stm1	(%0, %1, %2, %3)"
   [(set_attr "delay_type" "other")]
 )
 
 (define_peephole
-  [(set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-	   (match_operand:SI 0 "high_register_operand" "h"))
-   (set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-           (match_operand:SI 1 "high_register_operand" "h"))
-   (set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-           (match_operand:SI 2 "high_register_operand" "h"))]
+  [(set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 0 "high_register_operand" "h"))
+   (set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 1 "high_register_operand" "h"))
+   (set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 2 "high_register_operand" "h"))]
   "fr30_check_multiple_regs (operands, 3, 1)"
   "stm1	(%0, %1, %2)"
   [(set_attr "delay_type" "other")]
 )
 
 (define_peephole
-  [(set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-	   (match_operand:SI 0 "high_register_operand" "h"))
-   (set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-           (match_operand:SI 1 "high_register_operand" "h"))]
+  [(set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 0 "high_register_operand" "h"))
+   (set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 1 "high_register_operand" "h"))]
   "fr30_check_multiple_regs (operands, 2, 1)"
   "stm1	(%0, %1)"
   [(set_attr "delay_type" "other")]
 )
 
 (define_peephole
-  [(set:SI (match_operand:SI 0 "high_register_operand" "h")
-           (mem:SI (post_inc:SI (reg:SI 15))))
-   (set:SI (match_operand:SI 1 "high_register_operand" "h")
-           (mem:SI (post_inc:SI (reg:SI 15))))
-   (set:SI (match_operand:SI 2 "high_register_operand" "h")
-           (mem:SI (post_inc:SI (reg:SI 15))))
-   (set:SI (match_operand:SI 3 "high_register_operand" "h")
-           (mem:SI (post_inc:SI (reg:SI 15))))]
+  [(set (match_operand:SI 0 "high_register_operand" "h")
+	(mem:SI (post_inc:SI (reg:SI 15))))
+   (set (match_operand:SI 1 "high_register_operand" "h")
+	(mem:SI (post_inc:SI (reg:SI 15))))
+   (set (match_operand:SI 2 "high_register_operand" "h")
+	(mem:SI (post_inc:SI (reg:SI 15))))
+   (set (match_operand:SI 3 "high_register_operand" "h")
+	(mem:SI (post_inc:SI (reg:SI 15))))]
   "fr30_check_multiple_regs (operands, 4, 0)"
   "ldm1	(%0, %1, %2, %3)"
   [(set_attr "delay_type" "other")]
 )
 
 (define_peephole
-  [(set:SI (match_operand:SI 0 "high_register_operand" "h")
-           (mem:SI (post_inc:SI (reg:SI 15))))
-   (set:SI (match_operand:SI 1 "high_register_operand" "h")
-           (mem:SI (post_inc:SI (reg:SI 15))))
-   (set:SI (match_operand:SI 2 "high_register_operand" "h")
-           (mem:SI (post_inc:SI (reg:SI 15))))]
+  [(set (match_operand:SI 0 "high_register_operand" "h")
+	(mem:SI (post_inc:SI (reg:SI 15))))
+   (set (match_operand:SI 1 "high_register_operand" "h")
+	(mem:SI (post_inc:SI (reg:SI 15))))
+   (set (match_operand:SI 2 "high_register_operand" "h")
+	(mem:SI (post_inc:SI (reg:SI 15))))]
   "fr30_check_multiple_regs (operands, 3, 0)"
   "ldm1	(%0, %1, %2)"
   [(set_attr "delay_type" "other")]
 )
 
 (define_peephole
-  [(set:SI (match_operand:SI 0 "high_register_operand" "h")
-           (mem:SI (post_inc:SI (reg:SI 15))))
-   (set:SI (match_operand:SI 1 "high_register_operand" "h")
-           (mem:SI (post_inc:SI (reg:SI 15))))]
+  [(set (match_operand:SI 0 "high_register_operand" "h")
+	(mem:SI (post_inc:SI (reg:SI 15))))
+   (set (match_operand:SI 1 "high_register_operand" "h")
+	(mem:SI (post_inc:SI (reg:SI 15))))]
   "fr30_check_multiple_regs (operands, 2, 0)"
   "ldm1	(%0, %1)"
   [(set_attr "delay_type" "other")]
 )
 
 (define_peephole
-  [(set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-	   (match_operand:SI 0 "low_register_operand" "l"))
-   (set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-           (match_operand:SI 1 "low_register_operand" "l"))
-   (set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-           (match_operand:SI 2 "low_register_operand" "l"))
-   (set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-           (match_operand:SI 3 "low_register_operand" "l"))]
+  [(set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 0 "low_register_operand" "l"))
+   (set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 1 "low_register_operand" "l"))
+   (set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 2 "low_register_operand" "l"))
+   (set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 3 "low_register_operand" "l"))]
   "fr30_check_multiple_regs (operands, 4, 1)"
   "stm0	(%0, %1, %2, %3)"
   [(set_attr "delay_type" "other")]
 )
 
 (define_peephole
-  [(set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-	   (match_operand:SI 0 "low_register_operand" "l"))
-   (set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-           (match_operand:SI 1 "low_register_operand" "l"))
-   (set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-           (match_operand:SI 2 "low_register_operand" "l"))]
+  [(set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 0 "low_register_operand" "l"))
+   (set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 1 "low_register_operand" "l"))
+   (set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 2 "low_register_operand" "l"))]
   "fr30_check_multiple_regs (operands, 3, 1)"
   "stm0	(%0, %1, %2)"
   [(set_attr "delay_type" "other")]
 )
 
 (define_peephole
-  [(set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-	   (match_operand:SI 0 "low_register_operand" "l"))
-   (set:SI (mem:SI (pre_dec:SI (reg:SI 15)))
-           (match_operand:SI 1 "low_register_operand" "l"))]
+  [(set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 0 "low_register_operand" "l"))
+   (set (mem:SI (pre_dec:SI (reg:SI 15)))
+	(match_operand:SI 1 "low_register_operand" "l"))]
   "fr30_check_multiple_regs (operands, 2, 1)"
   "stm0	(%0, %1)"
   [(set_attr "delay_type" "other")]
@@ -1210,15 +1210,15 @@ 
 
 (define_expand "enter_func"
   [(parallel
-  [(set:SI (mem:SI (minus:SI (match_dup 1)
-			     (const_int 4)))
-	   (match_dup 2))
-   (set:SI (match_dup 2)
-	   (minus:SI (match_dup 1)
-		     (const_int 4)))
-   (set:SI (match_dup 1)
-	   (minus:SI (match_dup 1)
-		     (match_operand:SI 0 "immediate_operand")))]
+  [(set (mem:SI (minus:SI (match_dup 1)
+			  (const_int 4)))
+	(match_dup 2))
+   (set (match_dup 2)
+	(minus:SI (match_dup 1)
+		  (const_int 4)))
+   (set (match_dup 1)
+	(minus:SI (match_dup 1)
+		  (match_operand:SI 0 "immediate_operand")))]
   )]
   ""
 {
@@ -1227,15 +1227,15 @@ 
 })
 
 (define_insn "*enter_func"
-  [(set:SI (mem:SI (minus:SI (reg:SI 15)
-			     (const_int 4)))
-	   (reg:SI 14))
-   (set:SI (reg:SI 14)
-	   (minus:SI (reg:SI 15)
-		     (const_int 4)))
-   (set:SI (reg:SI 15)
-	   (minus:SI (reg:SI 15)
-		     (match_operand 0 "immediate_operand" "i")))]
+  [(set (mem:SI (minus:SI (reg:SI 15)
+			  (const_int 4)))
+	(reg:SI 14))
+   (set (reg:SI 14)
+	(minus:SI (reg:SI 15)
+		  (const_int 4)))
+   (set (reg:SI 15)
+	(minus:SI (reg:SI 15)
+		  (match_operand 0 "immediate_operand" "i")))]
   "reload_completed"
   "enter	#%0"
   [(set_attr "delay_type" "other")]
Index: config/moxie/moxie.md
===================================================================
--- config/moxie/moxie.md	(revision 168796)
+++ config/moxie/moxie.md	(working copy)
@@ -188,15 +188,15 @@ 
 
 ;; Push a register onto the stack
 (define_insn "movsi_push"
-  [(set:SI (mem:SI (pre_dec:SI (reg:SI 1)))
-	(match_operand:SI 0 "register_operand" "r"))]
+  [(set (mem:SI (pre_dec:SI (reg:SI 1)))
+  	(match_operand:SI 0 "register_operand" "r"))]
   ""
   "push   $sp, %0")
 
 ;; Pop a register from the stack
 (define_insn "movsi_pop"
-  [(set:SI (match_operand:SI 1 "register_operand" "=r")
-	(mem:SI (post_inc:SI (match_operand:SI 0 "register_operand" "r"))))]
+  [(set (match_operand:SI 1 "register_operand" "=r")
+  	(mem:SI (post_inc:SI (match_operand:SI 0 "register_operand" "r"))))]
   ""
   "pop    %0, %1")
 
Index: config/arm/iwmmxt.md
===================================================================
--- config/arm/iwmmxt.md	(revision 168796)
+++ config/arm/iwmmxt.md	(working copy)
@@ -551,7 +551,7 @@ 
 ;;
 ;; Note - you cannot use patterns like these here:
 ;;
-;;   (set:<vector> (match:<vector>) (<comparator>:<vector> (match:<vector>) (match:<vector>)))
+;;   (set (match:<vector>) (<comparator>:<vector> (match:<vector>) (match:<vector>)))
 ;;
 ;; Because GCC will assume that the truth value (1 or 0) is installed
 ;; into the entire destination vector, (with the '1' going into the least