Message ID | 1294989894-20780-1-git-send-email-shawn.guo@freescale.com |
---|---|
State | Not Applicable, archived |
Delegated to: | David Miller |
Headers | show |
On Fri, Jan 14, 2011 at 03:24:54PM +0800, Shawn Guo wrote: > Signed-off-by: Shawn Guo <shawn.guo@freescale.com> > --- > arch/arm/mach-mxs/Kconfig | 4 ++ > arch/arm/mach-mxs/Makefile | 3 + > arch/arm/mach-mxs/include/mach/common.h | 1 + > arch/arm/mach-mxs/ocotp.c | 90 +++++++++++++++++++++++++++++++ > 4 files changed, 98 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-mxs/ocotp.c > > diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig > index 8bfc8df..cd2fbdf 100644 > --- a/arch/arm/mach-mxs/Kconfig > +++ b/arch/arm/mach-mxs/Kconfig > @@ -2,6 +2,9 @@ if ARCH_MXS > > source "arch/arm/mach-mxs/devices/Kconfig" > > +config MXS_OCOTP > + bool > + > config SOC_IMX23 > bool > select CPU_ARM926T > @@ -26,6 +29,7 @@ config MACH_MX28EVK > select SOC_IMX28 > select MXS_HAVE_AMBA_DUART > select MXS_HAVE_PLATFORM_FEC > + select MXS_OCOTP > default y > help > Include support for MX28EVK platform. This includes specific > diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile > index 39d3f9c..623899b 100644 > --- a/arch/arm/mach-mxs/Makefile > +++ b/arch/arm/mach-mxs/Makefile > @@ -1,6 +1,9 @@ > # Common support > obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o > > +obj-$(CONFIG_PM) += pm.o > +obj-$(CONFIG_MXS_OCOTP) += ocotp.o > + > obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o > obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o > > diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h > index 59133eb..635bb5d 100644 > --- a/arch/arm/mach-mxs/include/mach/common.h > +++ b/arch/arm/mach-mxs/include/mach/common.h > @@ -13,6 +13,7 @@ > > struct clk; > > +extern const u32 *mxs_get_ocotp(void); > extern int mxs_reset_block(void __iomem *); > extern void mxs_timer_init(struct clk *, int); > > diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c > new file mode 100644 > index 0000000..eb2eab7 > --- /dev/null > +++ b/arch/arm/mach-mxs/ocotp.c > @@ -0,0 +1,90 @@ > +/* > + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/delay.h> > +#include <linux/err.h> > +#include <linux/mutex.h> > + > +#include <mach/mxs.h> > + > +#define OCOTP_WORD_OFFSET 0x20 > +#define OCOTP_WORD_COUNT 0x20 > + > +#define BM_OCOTP_CTRL_BUSY (1 << 8) > +#define BM_OCOTP_CTRL_ERROR (1 << 9) > +#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) > + > +static DEFINE_MUTEX(ocotp_mutex); > +static u32 ocotp_words[OCOTP_WORD_COUNT]; > + > +const u32 *mxs_get_ocotp(void) > +{ > + void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR); > + int timeout = 0x400; > + size_t i; > + static int once = 0; > + > + if (once) > + return ocotp_words; > + > + mutex_lock(&ocotp_mutex); > + > + /* > + * clk_enable(hbus_clk) for ocotp can be skipped > + * as it must be on when system is running. > + */ > + > + /* try to clear ERROR bit */ > + __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); > + > + /* check both BUSY and ERROR cleared */ > + while ((__raw_readl(ocotp_base) & > + (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) > + cpu_relax(); > + > + if (unlikely(!timeout)) > + goto error_unlock; > + > + /* open OCOTP banks for read */ > + __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); > + > + /* approximately wait 32 hclk cycles */ > + udelay(1); > + > + /* poll BUSY bit becoming cleared */ > + timeout = 0x400; > + while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) > + cpu_relax(); > + > + if (unlikely(!timeout)) > + goto error_unlock; > + > + for (i = 0; i < OCOTP_WORD_COUNT; i++) > + ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + > + i * 0x10); > + > + /* close banks for power saving */ > + __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); > + > + mutex_unlock(&ocotp_mutex); > + > + once = 1; > + > + return ocotp_words; > + > +error_unlock: > + mutex_unlock(&ocotp_mutex); > + pr_err("%s: timeout in reading OCOTP\n", __func__); > + return NULL; > +} EXPORT_SYMBOL? Sascha
On Fri, Jan 14, 2011 at 03:24:54PM +0800, Shawn Guo wrote: > Signed-off-by: Shawn Guo <shawn.guo@freescale.com> > --- > arch/arm/mach-mxs/Kconfig | 4 ++ > arch/arm/mach-mxs/Makefile | 3 + > arch/arm/mach-mxs/include/mach/common.h | 1 + > arch/arm/mach-mxs/ocotp.c | 90 +++++++++++++++++++++++++++++++ > 4 files changed, 98 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-mxs/ocotp.c > > diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig > index 8bfc8df..cd2fbdf 100644 > --- a/arch/arm/mach-mxs/Kconfig > +++ b/arch/arm/mach-mxs/Kconfig > @@ -2,6 +2,9 @@ if ARCH_MXS > > source "arch/arm/mach-mxs/devices/Kconfig" > > +config MXS_OCOTP > + bool > + > config SOC_IMX23 > bool > select CPU_ARM926T > @@ -26,6 +29,7 @@ config MACH_MX28EVK > select SOC_IMX28 > select MXS_HAVE_AMBA_DUART > select MXS_HAVE_PLATFORM_FEC > + select MXS_OCOTP > default y > help > Include support for MX28EVK platform. This includes specific > diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile > index 39d3f9c..623899b 100644 > --- a/arch/arm/mach-mxs/Makefile > +++ b/arch/arm/mach-mxs/Makefile > @@ -1,6 +1,9 @@ > # Common support > obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o > > +obj-$(CONFIG_PM) += pm.o this line doesn't belong here. > +obj-$(CONFIG_MXS_OCOTP) += ocotp.o > + > obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o > obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o > > diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h > index 59133eb..635bb5d 100644 > --- a/arch/arm/mach-mxs/include/mach/common.h > +++ b/arch/arm/mach-mxs/include/mach/common.h > @@ -13,6 +13,7 @@ > > struct clk; > > +extern const u32 *mxs_get_ocotp(void); > extern int mxs_reset_block(void __iomem *); > extern void mxs_timer_init(struct clk *, int); > > diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c > new file mode 100644 > index 0000000..eb2eab7 > --- /dev/null > +++ b/arch/arm/mach-mxs/ocotp.c > @@ -0,0 +1,90 @@ > +/* > + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/delay.h> > +#include <linux/err.h> > +#include <linux/mutex.h> > + > +#include <mach/mxs.h> > + > +#define OCOTP_WORD_OFFSET 0x20 > +#define OCOTP_WORD_COUNT 0x20 > + > +#define BM_OCOTP_CTRL_BUSY (1 << 8) > +#define BM_OCOTP_CTRL_ERROR (1 << 9) > +#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) > + > +static DEFINE_MUTEX(ocotp_mutex); > +static u32 ocotp_words[OCOTP_WORD_COUNT]; > + > +const u32 *mxs_get_ocotp(void) > +{ > + void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR); > + int timeout = 0x400; > + size_t i; > + static int once = 0; > + > + if (once) > + return ocotp_words; > + > + mutex_lock(&ocotp_mutex); > + > + /* > + * clk_enable(hbus_clk) for ocotp can be skipped > + * as it must be on when system is running. > + */ > + > + /* try to clear ERROR bit */ > + __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); > + > + /* check both BUSY and ERROR cleared */ > + while ((__raw_readl(ocotp_base) & > + (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) > + cpu_relax(); > + > + if (unlikely(!timeout)) > + goto error_unlock; > + > + /* open OCOTP banks for read */ > + __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); > + > + /* approximately wait 32 hclk cycles */ > + udelay(1); > + > + /* poll BUSY bit becoming cleared */ > + timeout = 0x400; > + while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) > + cpu_relax(); > + > + if (unlikely(!timeout)) > + goto error_unlock; > + > + for (i = 0; i < OCOTP_WORD_COUNT; i++) > + ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + > + i * 0x10); > + > + /* close banks for power saving */ > + __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); > + > + mutex_unlock(&ocotp_mutex); > + > + once = 1; once needs to be protected by the mutex, too. Best regards Uwe > + > + return ocotp_words; > + > +error_unlock: > + mutex_unlock(&ocotp_mutex); > + pr_err("%s: timeout in reading OCOTP\n", __func__); > + return NULL; > +} > -- > 1.7.1 > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
Hello Sascha, On Fri, Jan 14, 2011 at 09:40:09AM +0100, Sascha Hauer wrote: > On Fri, Jan 14, 2011 at 03:24:54PM +0800, Shawn Guo wrote: > > +const u32 *mxs_get_ocotp(void) > > +{ > > + [...] > > +} > > EXPORT_SYMBOL? I don't think this should be necessary. mxs_get_ocotp should only be called from platform code that cannot (ot at least should not) be modular. I suggest to skip it for now and if we really need it later only add it then. Best regards Uwe
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 8bfc8df..cd2fbdf 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -2,6 +2,9 @@ if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig" +config MXS_OCOTP + bool + config SOC_IMX23 bool select CPU_ARM926T @@ -26,6 +29,7 @@ config MACH_MX28EVK select SOC_IMX28 select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_FEC + select MXS_OCOTP default y help Include support for MX28EVK platform. This includes specific diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 39d3f9c..623899b 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,6 +1,9 @@ # Common support obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_MXS_OCOTP) += ocotp.o + obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index 59133eb..635bb5d 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -13,6 +13,7 @@ struct clk; +extern const u32 *mxs_get_ocotp(void); extern int mxs_reset_block(void __iomem *); extern void mxs_timer_init(struct clk *, int); diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c new file mode 100644 index 0000000..eb2eab7 --- /dev/null +++ b/arch/arm/mach-mxs/ocotp.c @@ -0,0 +1,90 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/mutex.h> + +#include <mach/mxs.h> + +#define OCOTP_WORD_OFFSET 0x20 +#define OCOTP_WORD_COUNT 0x20 + +#define BM_OCOTP_CTRL_BUSY (1 << 8) +#define BM_OCOTP_CTRL_ERROR (1 << 9) +#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) + +static DEFINE_MUTEX(ocotp_mutex); +static u32 ocotp_words[OCOTP_WORD_COUNT]; + +const u32 *mxs_get_ocotp(void) +{ + void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR); + int timeout = 0x400; + size_t i; + static int once = 0; + + if (once) + return ocotp_words; + + mutex_lock(&ocotp_mutex); + + /* + * clk_enable(hbus_clk) for ocotp can be skipped + * as it must be on when system is running. + */ + + /* try to clear ERROR bit */ + __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); + + /* check both BUSY and ERROR cleared */ + while ((__raw_readl(ocotp_base) & + (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + /* open OCOTP banks for read */ + __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + /* approximately wait 32 hclk cycles */ + udelay(1); + + /* poll BUSY bit becoming cleared */ + timeout = 0x400; + while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + for (i = 0; i < OCOTP_WORD_COUNT; i++) + ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + + i * 0x10); + + /* close banks for power saving */ + __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + mutex_unlock(&ocotp_mutex); + + once = 1; + + return ocotp_words; + +error_unlock: + mutex_unlock(&ocotp_mutex); + pr_err("%s: timeout in reading OCOTP\n", __func__); + return NULL; +}
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> --- arch/arm/mach-mxs/Kconfig | 4 ++ arch/arm/mach-mxs/Makefile | 3 + arch/arm/mach-mxs/include/mach/common.h | 1 + arch/arm/mach-mxs/ocotp.c | 90 +++++++++++++++++++++++++++++++ 4 files changed, 98 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mxs/ocotp.c