diff mbox series

[PATCHv3,1/3] dt-bindings: documentation: add clock bindings information for Stratix10

Message ID 1517847767-16053-1-git-send-email-dinguyen@kernel.org
State Changes Requested, archived
Headers show
Series [PATCHv3,1/3] dt-bindings: documentation: add clock bindings information for Stratix10 | expand

Commit Message

Dinh Nguyen Feb. 5, 2018, 4:22 p.m. UTC 
Document that Stratix10 clock bindings, and add the clock header file. The
clock header is an enumeration of all the different clocks on the Stratix10
platform.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v3:
- s/intc/intel for correct vendor prefix
- fixup node name to "intel,stratix10-clkmgr"
- document the required fixed-clock for oscillators
v2:
- use a single binding for the clock controller
---
 .../devicetree/bindings/clock/intc_stratix10.txt   | 47 ++++++++++++
 include/dt-bindings/clock/stratix10-clock.h        | 85 ++++++++++++++++++++++
 2 files changed, 132 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/intc_stratix10.txt
 create mode 100644 include/dt-bindings/clock/stratix10-clock.h

Comments

Rob Herring Feb. 9, 2018, 2:43 a.m. UTC | #1 
On Mon, Feb 05, 2018 at 10:22:45AM -0600, Dinh Nguyen wrote:
> Document that Stratix10 clock bindings, and add the clock header file. The
> clock header is an enumeration of all the different clocks on the Stratix10
> platform.
> 
> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
> ---
> v3:
> - s/intc/intel for correct vendor prefix
> - fixup node name to "intel,stratix10-clkmgr"
> - document the required fixed-clock for oscillators
> v2:
> - use a single binding for the clock controller
> ---
>  .../devicetree/bindings/clock/intc_stratix10.txt   | 47 ++++++++++++
>  include/dt-bindings/clock/stratix10-clock.h        | 85 ++++++++++++++++++++++
>  2 files changed, 132 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/intc_stratix10.txt
>  create mode 100644 include/dt-bindings/clock/stratix10-clock.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/intc_stratix10.txt b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
> new file mode 100644
> index 0000000..8d218f4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
> @@ -0,0 +1,47 @@
> +Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible : shall be
> +	"intel,stratix10-clkmgr"
> +
> +- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
> +
> +- #clock-cells : from common clock binding, shall be set to 1.
> +
> +- clocks : Should contain fixed-clock sources, such as oscillators.
> +
> +Example:
> +	clkmgr: clock-controller@ffd10000 {
> +		compatible = "intel,stratix10-clkmgr";
> +		reg = <0xffd10000 0x1000>;
> +		#clock-cells = <1>;
> +
> +		clocks {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {

Don't use '_' in node names.

> +				#clock-cells = <0>;
> +				compatible = "fixed-clock";

fixed clock with no frequency?

> +			};
> +
> +			cb_intosc_ls_clk: cb_intosc_ls_clk {
> +				#clock-cells = <0>;
> +				compatible = "fixed-clock";
> +			};
> +
> +			f2s_free_clk: f2s_free_clk {
> +				#clock-cells = <0>;
> +				compatible = "fixed-clock";
> +			};
> +
> +			osc1: osc1 {
> +				#clock-cells = <0>;
> +				compatible = "fixed-clock";
> +			};
> +		};
> +	};
> diff --git a/include/dt-bindings/clock/stratix10-clock.h b/include/dt-bindings/clock/stratix10-clock.h
> new file mode 100644
> index 0000000..bbbd9fd
> --- /dev/null
> +++ b/include/dt-bindings/clock/stratix10-clock.h
> @@ -0,0 +1,85 @@
> +/*
> + * SPDX-License-Identifier:	GPL-2.0

This should be first line. Sorry, it's a moving target.

> + *
> + * Copyright (C) 2017, Intel Corporation
> + */
> +
> +#ifndef __STRATIX10_CLOCK_H
> +#define __STRATIX10_CLOCK_H
> +
> +/* fixed rate clocks */
> +#define STRATIX10_OSC1			0
> +#define STRATIX10_CB_INTOSC_HS_DIV2_CLK	1
> +#define STRATIX10_CB_INTOSC_LS_CLK	2
> +#define STRATIX10_F2S_FREE_CLK		3
> +
> +/* fixed factor clocks */
> +#define STRATIX10_L4_SYS_FREE_CLK	4
> +#define STRATIX10_MPU_PERIPH_CLK	5
> +#define STRATIX10_MPU_L2RAM_CLK		6
> +#define STRATIX10_SDMMC_CIU_CLK		7
> +
> +/* PLL clocks */
> +#define STRATIX10_MAIN_PLL_CLK		8
> +#define STRATIX10_PERIPH_PLL_CLK	9
> +#define STRATIX10_BOOT_CLK		10
> +
> +/* Periph clocks */
> +#define STRATIX10_MAIN_MPU_BASE_CLK	11
> +#define STRATIX10_MAIN_NOC_BASE_CLK	12
> +#define STRATIX10_MAIN_EMACA_CLK	13
> +#define STRATIX10_MAIN_EMACB_CLK	14
> +#define STRATIX10_MAIN_EMAC_PTP_CLK	15
> +#define STRATIX10_MAIN_GPIO_DB_CLK	16
> +#define STRATIX10_MAIN_SDMMC_CLK	17
> +#define STRATIX10_MAIN_S2F_USR0_CLK	18
> +#define STRATIX10_MAIN_S2F_USR1_CLK	19
> +#define STRATIX10_MAIN_PSI_REF_CLK	20
> +
> +#define STRATIX10_PERI_MPU_BASE_CLK	21
> +#define STRATIX10_PERI_NOC_BASE_CLK	22
> +#define STRATIX10_PERI_EMACA_CLK	23
> +#define STRATIX10_PERI_EMACB_CLK	24
> +#define STRATIX10_PERI_EMAC_PTP_CLK	25
> +#define STRATIX10_PERI_GPIO_DB_CLK	26
> +#define STRATIX10_PERI_SDMMC_CLK	27
> +#define STRATIX10_PERI_S2F_USR0_CLK	28
> +#define STRATIX10_PERI_S2F_USR1_CLK	29
> +#define STRATIX10_PERI_PSI_REF_CLK	30
> +
> +#define STRATIX10_MPU_FREE_CLK		31
> +#define STRATIX10_NOC_FREE_CLK		32
> +#define STRATIX10_S2F_USR0_CLK		33
> +#define STRATIX10_NOC_CLK		34
> +#define STRATIX10_EMAC_A_FREE_CLK	35
> +#define STRATIX10_EMAC_B_FREE_CLK	36
> +#define STRATIX10_EMAC_PTP_FREE_CLK	37
> +#define STRATIX10_GPIO_DB_FREE_CLK	38
> +#define STRATIX10_SDMMC_FREE_CLK	39
> +#define STRATIX10_S2F_USER1_FREE_CLK	40
> +#define STRATIX10_PSI_REF_FREE_CLK	41
> +
> +/* Gate clocks */
> +#define STRATIX10_MPU_CLK		42
> +#define STRATIX10_L4_MAIN_CLK		43
> +#define	STRATIX10_L4_MP_CLK		44

A stray tab...

> +#define STRATIX10_L4_SP_CLK		45
> +#define STRATIX10_CS_AT_CLK		46
> +#define STRATIX10_CS_TRACE_CLK		47
> +#define STRATIX10_CS_PDBG_CLK		48
> +#define STRATIX10_CS_TIMER_CLK		49
> +#define STRATIX10_S2F_USER0_CLK		50
> +#define STRATIX10_S2F_USER1_CLK		51
> +#define STRATIX10_EMAC0_CLK		52
> +#define STRATIX10_EMAC1_CLK		53
> +#define STRATIX10_EMAC2_CLK		54
> +#define STRATIX10_EMAC_PTP_CLK		55
> +#define STRATIX10_GPIO_DB_CLK		56
> +#define STRATIX10_SDMMC_CLK		57
> +#define STRATIX10_PSI_REF_CLK		58
> +#define STRATIX10_USB_CLK		59
> +#define STRATIX10_SPI_M_CLK		60
> +#define STRATIX10_NAND_CLK		61
> +#define STRATIX10_NUM_CLKS		62
> +
> +#endif	/* __STRATIX10_CLOCK_H */
> -- 
> 2.7.4
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Dinh Nguyen Feb. 9, 2018, 6:19 p.m. UTC | #2 
Hi Rob,


On 02/08/2018 08:43 PM, Rob Herring wrote:
> On Mon, Feb 05, 2018 at 10:22:45AM -0600, Dinh Nguyen wrote:
>> Document that Stratix10 clock bindings, and add the clock header file. The
>> clock header is an enumeration of all the different clocks on the Stratix10
>> platform.
>>
>> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
>> ---
>> v3:
>> - s/intc/intel for correct vendor prefix
>> - fixup node name to "intel,stratix10-clkmgr"
>> - document the required fixed-clock for oscillators
>> v2:
>> - use a single binding for the clock controller
>> ---
>>  .../devicetree/bindings/clock/intc_stratix10.txt   | 47 ++++++++++++
>>  include/dt-bindings/clock/stratix10-clock.h        | 85 ++++++++++++++++++++++
>>  2 files changed, 132 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/clock/intc_stratix10.txt
>>  create mode 100644 include/dt-bindings/clock/stratix10-clock.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/intc_stratix10.txt b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
>> new file mode 100644
>> index 0000000..8d218f4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
>> @@ -0,0 +1,47 @@
>> +Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform
>> +
>> +This binding uses the common clock binding[1].
>> +
>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>> +
>> +Required properties:
>> +- compatible : shall be
>> +	"intel,stratix10-clkmgr"
>> +
>> +- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
>> +
>> +- #clock-cells : from common clock binding, shall be set to 1.
>> +
>> +- clocks : Should contain fixed-clock sources, such as oscillators.
>> +
>> +Example:
>> +	clkmgr: clock-controller@ffd10000 {
>> +		compatible = "intel,stratix10-clkmgr";
>> +		reg = <0xffd10000 0x1000>;
>> +		#clock-cells = <1>;
>> +
>> +		clocks {
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +
>> +			cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
> 
> Don't use '_' in node names.
> 

Ok..

>> +				#clock-cells = <0>;
>> +				compatible = "fixed-clock";
> 
> fixed clock with no frequency?

The frequency gets populated in the board's dts file. This provides for
the scenario where different boards might use different oscillator
frequencies.

So in socfpga_stratix10, I would have:

soc {
	clock-controller@ffd10000 {
		clocks {
			osc1 {
				clock-frequency = <25000000>;
			};
		};
	};
};

Thanks,
Dinh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rob Herring Feb. 12, 2018, 4:41 p.m. UTC | #3 
On Fri, Feb 9, 2018 at 12:19 PM, Dinh Nguyen <dinguyen@kernel.org> wrote:
> Hi Rob,
>
>
> On 02/08/2018 08:43 PM, Rob Herring wrote:
>> On Mon, Feb 05, 2018 at 10:22:45AM -0600, Dinh Nguyen wrote:
>>> Document that Stratix10 clock bindings, and add the clock header file. The
>>> clock header is an enumeration of all the different clocks on the Stratix10
>>> platform.
>>>
>>> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
>>> ---
>>> v3:
>>> - s/intc/intel for correct vendor prefix
>>> - fixup node name to "intel,stratix10-clkmgr"
>>> - document the required fixed-clock for oscillators
>>> v2:
>>> - use a single binding for the clock controller
>>> ---
>>>  .../devicetree/bindings/clock/intc_stratix10.txt   | 47 ++++++++++++
>>>  include/dt-bindings/clock/stratix10-clock.h        | 85 ++++++++++++++++++++++
>>>  2 files changed, 132 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/clock/intc_stratix10.txt
>>>  create mode 100644 include/dt-bindings/clock/stratix10-clock.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/clock/intc_stratix10.txt b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
>>> new file mode 100644
>>> index 0000000..8d218f4
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
>>> @@ -0,0 +1,47 @@
>>> +Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform
>>> +
>>> +This binding uses the common clock binding[1].
>>> +
>>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>>> +
>>> +Required properties:
>>> +- compatible : shall be
>>> +    "intel,stratix10-clkmgr"
>>> +
>>> +- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
>>> +
>>> +- #clock-cells : from common clock binding, shall be set to 1.
>>> +
>>> +- clocks : Should contain fixed-clock sources, such as oscillators.
>>> +
>>> +Example:
>>> +    clkmgr: clock-controller@ffd10000 {
>>> +            compatible = "intel,stratix10-clkmgr";
>>> +            reg = <0xffd10000 0x1000>;
>>> +            #clock-cells = <1>;
>>> +
>>> +            clocks {
>>> +                    #address-cells = <1>;
>>> +                    #size-cells = <0>;
>>> +
>>> +                    cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
>>
>> Don't use '_' in node names.
>>
>
> Ok..
>
>>> +                            #clock-cells = <0>;
>>> +                            compatible = "fixed-clock";
>>
>> fixed clock with no frequency?
>
> The frequency gets populated in the board's dts file. This provides for
> the scenario where different boards might use different oscillator
> frequencies.

That is irrelevant for examples. The SoC vs. board file split is
outside the scope of the binding (i.e. not part of the ABI). Well, at
least until it is done with overlays.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/intc_stratix10.txt b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
new file mode 100644
index 0000000..8d218f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
@@ -0,0 +1,47 @@ 
+Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be
+	"intel,stratix10-clkmgr"
+
+- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
+
+- #clock-cells : from common clock binding, shall be set to 1.
+
+- clocks : Should contain fixed-clock sources, such as oscillators.
+
+Example:
+	clkmgr: clock-controller@ffd10000 {
+		compatible = "intel,stratix10-clkmgr";
+		reg = <0xffd10000 0x1000>;
+		#clock-cells = <1>;
+
+		clocks {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			cb_intosc_ls_clk: cb_intosc_ls_clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			f2s_free_clk: f2s_free_clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			osc1: osc1 {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+		};
+	};
diff --git a/include/dt-bindings/clock/stratix10-clock.h b/include/dt-bindings/clock/stratix10-clock.h
new file mode 100644
index 0000000..bbbd9fd
--- /dev/null
+++ b/include/dt-bindings/clock/stratix10-clock.h
@@ -0,0 +1,85 @@ 
+/*
+ * SPDX-License-Identifier:	GPL-2.0
+ *
+ * Copyright (C) 2017, Intel Corporation
+ */
+
+#ifndef __STRATIX10_CLOCK_H
+#define __STRATIX10_CLOCK_H
+
+/* fixed rate clocks */
+#define STRATIX10_OSC1			0
+#define STRATIX10_CB_INTOSC_HS_DIV2_CLK	1
+#define STRATIX10_CB_INTOSC_LS_CLK	2
+#define STRATIX10_F2S_FREE_CLK		3
+
+/* fixed factor clocks */
+#define STRATIX10_L4_SYS_FREE_CLK	4
+#define STRATIX10_MPU_PERIPH_CLK	5
+#define STRATIX10_MPU_L2RAM_CLK		6
+#define STRATIX10_SDMMC_CIU_CLK		7
+
+/* PLL clocks */
+#define STRATIX10_MAIN_PLL_CLK		8
+#define STRATIX10_PERIPH_PLL_CLK	9
+#define STRATIX10_BOOT_CLK		10
+
+/* Periph clocks */
+#define STRATIX10_MAIN_MPU_BASE_CLK	11
+#define STRATIX10_MAIN_NOC_BASE_CLK	12
+#define STRATIX10_MAIN_EMACA_CLK	13
+#define STRATIX10_MAIN_EMACB_CLK	14
+#define STRATIX10_MAIN_EMAC_PTP_CLK	15
+#define STRATIX10_MAIN_GPIO_DB_CLK	16
+#define STRATIX10_MAIN_SDMMC_CLK	17
+#define STRATIX10_MAIN_S2F_USR0_CLK	18
+#define STRATIX10_MAIN_S2F_USR1_CLK	19
+#define STRATIX10_MAIN_PSI_REF_CLK	20
+
+#define STRATIX10_PERI_MPU_BASE_CLK	21
+#define STRATIX10_PERI_NOC_BASE_CLK	22
+#define STRATIX10_PERI_EMACA_CLK	23
+#define STRATIX10_PERI_EMACB_CLK	24
+#define STRATIX10_PERI_EMAC_PTP_CLK	25
+#define STRATIX10_PERI_GPIO_DB_CLK	26
+#define STRATIX10_PERI_SDMMC_CLK	27
+#define STRATIX10_PERI_S2F_USR0_CLK	28
+#define STRATIX10_PERI_S2F_USR1_CLK	29
+#define STRATIX10_PERI_PSI_REF_CLK	30
+
+#define STRATIX10_MPU_FREE_CLK		31
+#define STRATIX10_NOC_FREE_CLK		32
+#define STRATIX10_S2F_USR0_CLK		33
+#define STRATIX10_NOC_CLK		34
+#define STRATIX10_EMAC_A_FREE_CLK	35
+#define STRATIX10_EMAC_B_FREE_CLK	36
+#define STRATIX10_EMAC_PTP_FREE_CLK	37
+#define STRATIX10_GPIO_DB_FREE_CLK	38
+#define STRATIX10_SDMMC_FREE_CLK	39
+#define STRATIX10_S2F_USER1_FREE_CLK	40
+#define STRATIX10_PSI_REF_FREE_CLK	41
+
+/* Gate clocks */
+#define STRATIX10_MPU_CLK		42
+#define STRATIX10_L4_MAIN_CLK		43
+#define	STRATIX10_L4_MP_CLK		44
+#define STRATIX10_L4_SP_CLK		45
+#define STRATIX10_CS_AT_CLK		46
+#define STRATIX10_CS_TRACE_CLK		47
+#define STRATIX10_CS_PDBG_CLK		48
+#define STRATIX10_CS_TIMER_CLK		49
+#define STRATIX10_S2F_USER0_CLK		50
+#define STRATIX10_S2F_USER1_CLK		51
+#define STRATIX10_EMAC0_CLK		52
+#define STRATIX10_EMAC1_CLK		53
+#define STRATIX10_EMAC2_CLK		54
+#define STRATIX10_EMAC_PTP_CLK		55
+#define STRATIX10_GPIO_DB_CLK		56
+#define STRATIX10_SDMMC_CLK		57
+#define STRATIX10_PSI_REF_CLK		58
+#define STRATIX10_USB_CLK		59
+#define STRATIX10_SPI_M_CLK		60
+#define STRATIX10_NAND_CLK		61
+#define STRATIX10_NUM_CLKS		62
+
+#endif	/* __STRATIX10_CLOCK_H */