Message ID | 20180121031614.29091-2-woods.technical@gmail.com |
---|---|
State | Accepted |
Commit | 6e1364fe4558f248222a0223e06fd0e73e72bf0a |
Delegated to: | Tom Rini |
Headers | show |
Series | ARM: omap3: evm: Fix distro bootcmd | expand |
On Sat, Jan 20, 2018 at 09:16:13PM -0600, Derald D. Woods wrote: > This commit allows overriding the default assumption that the boot UBI > MTD partition is named 'UBI' and the UBI volume is 'boot'. A board > desiring to use a legacy or alternative NAND layout can now define the > following two extra environment variables: > > bootubipart=<some_ubi_partition_name> > bootubivol=<some_ubi_volume_name> > > EXAMPLE: > > [include/configs/some_board.h] Applied to u-boot/master, thanks!
diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 5c469a23fa..f567cebd38 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -71,10 +71,15 @@ #ifdef CONFIG_CMD_UBIFS #define BOOTENV_SHARED_UBIFS \ "ubifs_boot=" \ - "if ubi part UBI && ubifsmount ubi${devnum}:boot; then " \ - "setenv devtype ubi; " \ - "setenv bootpart 0; " \ - "run scan_dev_for_boot; " \ + "env exists bootubipart || " \ + "env set bootubipart UBI; " \ + "env exists bootubivol || " \ + "env set bootubivol boot; " \ + "if ubi part ${bootubipart} && " \ + "ubifsmount ubi${devnum}:${bootubivol}; " \ + "then " \ + "setenv devtype ubi; " \ + "run scan_dev_for_boot; " \ "fi\0" #define BOOTENV_DEV_UBIFS BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_UBIFS BOOTENV_DEV_NAME_BLKDEV @@ -125,7 +130,7 @@ "${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; " \ "if fdt addr ${fdt_addr_r}; then " \ "bootefi ${kernel_addr_r} ${fdt_addr_r};" \ - "else " \ + "else " \ "bootefi ${kernel_addr_r} ${fdtcontroladdr};" \ "fi\0" \ \
This commit allows overriding the default assumption that the boot UBI MTD partition is named 'UBI' and the UBI volume is 'boot'. A board desiring to use a legacy or alternative NAND layout can now define the following two extra environment variables: bootubipart=<some_ubi_partition_name> bootubivol=<some_ubi_volume_name> EXAMPLE: [include/configs/some_board.h] ---8<------------------------------------------------------------------- [...] #include <config_distro_defaults.h> #define MEM_LAYOUT_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV #define BOOT_TARGET_DEVICES(func) \ func(UBIFS, ubifs, 0) #include <config_distro_bootcmd.h> [...] #define CONFIG_EXTRA_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ "bootubivol=rootfs\0" \ "bootubipart=rootfs\0" \ BOOTENV [...] ---8<------------------------------------------------------------------- Signed-off-by: Derald D. Woods <woods.technical@gmail.com> --- include/config_distro_bootcmd.h | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)