Message ID | cover.2e5329bf5475a5160e613a4eb1e1377c662ce56e.1516012352.git-series.quentin.schulz@free-electrons.com |
---|---|
Headers | show |
Series | add support for AXP813 ADC and battery power supply | expand |
On Mon, 15 Jan 2018 11:33:35 +0100 Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > To prepare for a new comer that set a different register with different > values, move rate setting in a function that is specific to each AXP > variant. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Applied to the togreg branch of iio.git and pushed out as testing. Thanks, Jonathan > --- > drivers/iio/adc/axp20x_adc.c | 18 +++++++++++------- > 1 file changed, 11 insertions(+), 7 deletions(-) > > diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c > index a30a972..3fc1b06 100644 > --- a/drivers/iio/adc/axp20x_adc.c > +++ b/drivers/iio/adc/axp20x_adc.c > @@ -470,14 +470,18 @@ static const struct iio_info axp22x_adc_iio_info = { > .read_raw = axp22x_read_raw, > }; > > -static int axp20x_adc_rate(int rate) > +static int axp20x_adc_rate(struct axp20x_adc_iio *info, int rate) > { > - return AXP20X_ADC_RATE_HZ(rate); > + return regmap_update_bits(info->regmap, AXP20X_ADC_RATE, > + AXP20X_ADC_RATE_MASK, > + AXP20X_ADC_RATE_HZ(rate)); > } > > -static int axp22x_adc_rate(int rate) > +static int axp22x_adc_rate(struct axp20x_adc_iio *info, int rate) > { > - return AXP22X_ADC_RATE_HZ(rate); > + return regmap_update_bits(info->regmap, AXP20X_ADC_RATE, > + AXP20X_ADC_RATE_MASK, > + AXP22X_ADC_RATE_HZ(rate)); > } > > struct axp_data { > @@ -485,7 +489,8 @@ struct axp_data { > int num_channels; > struct iio_chan_spec const *channels; > unsigned long adc_en1_mask; > - int (*adc_rate)(int rate); > + int (*adc_rate)(struct axp20x_adc_iio *info, > + int rate); > bool adc_en2; > struct iio_map *maps; > }; > @@ -554,8 +559,7 @@ static int axp20x_probe(struct platform_device *pdev) > AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK); > > /* Configure ADCs rate */ > - regmap_update_bits(info->regmap, AXP20X_ADC_RATE, AXP20X_ADC_RATE_MASK, > - info->data->adc_rate(100)); > + info->data->adc_rate(info, 100); > > ret = iio_map_array_register(indio_dev, info->data->maps); > if (ret < 0) { -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 15 Jan 2018 11:33:37 +0100 Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > To prepare for a future patch that will add a DT node for the ADC, make > axp20x_adc able to probe from DT and get the per-variant data from > of_device_id.data since platform_device_id.driver_data won't be set when > probing by DT. > > Leave the ability to probe via platform for driver compatibility with > old DTs. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Looks good to me. Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. If anyone wants to comment I won't be pushing out in a non rebasing form until at least next weekend. Thanks, Jonathan > --- > drivers/iio/adc/axp20x_adc.c | 19 ++++++++++++++++++- > 1 file changed, 18 insertions(+), 1 deletion(-) > > diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c > index 3fc1b06..3968053 100644 > --- a/drivers/iio/adc/axp20x_adc.c > +++ b/drivers/iio/adc/axp20x_adc.c > @@ -515,6 +515,13 @@ static const struct axp_data axp22x_data = { > .maps = axp22x_maps, > }; > > +static const struct of_device_id axp20x_adc_of_match[] = { > + { .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, }, > + { .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, axp20x_adc_of_match); > + > static const struct platform_device_id axp20x_adc_id_match[] = { > { .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, }, > { .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, }, > @@ -543,7 +550,16 @@ static int axp20x_probe(struct platform_device *pdev) > indio_dev->dev.of_node = pdev->dev.of_node; > indio_dev->modes = INDIO_DIRECT_MODE; > > - info->data = (struct axp_data *)platform_get_device_id(pdev)->driver_data; > + if (!pdev->dev.of_node) { > + const struct platform_device_id *id; > + > + id = platform_get_device_id(pdev); > + info->data = (struct axp_data *)id->driver_data; > + } else { > + struct device *dev = &pdev->dev; > + > + info->data = (struct axp_data *)of_device_get_match_data(dev); > + } > > indio_dev->name = platform_get_device_id(pdev)->name; > indio_dev->info = info->data->iio_info; > @@ -606,6 +622,7 @@ static int axp20x_remove(struct platform_device *pdev) > static struct platform_driver axp20x_adc_driver = { > .driver = { > .name = "axp20x-adc", > + .of_match_table = of_match_ptr(axp20x_adc_of_match), > }, > .id_table = axp20x_adc_id_match, > .probe = axp20x_probe, -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 15 Jan 2018 11:33:41 +0100 Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > The X-Powers AXP813 PMIC is really close to what is already done for > AXP20X/AXP22X. > > There are two pairs of bits to set the rate (one for Voltage and Current > measurements and one for TS/GPIO0 voltage measurements) instead of one. > > The register to set the ADC rates is different from the one for > AXP20X/AXP22X. > > GPIO0 can be used as an ADC (measuring Volts) unlike for AXP22X. > > The scales to apply to the different inputs are unlike the ones from > AXP20X and AXP22X. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. One thing that might be nice to tidy up in this driver though. CHECK drivers/iio/adc/axp20x_adc.c drivers/iio/adc/axp20x_adc.c:548:26: warning: dubious: !x & y drivers/iio/adc/axp20x_adc.c:553:26: warning: dubious: !x & y Those are 'interesting' code constructions. It may be worth being a little more verbose to keep sparse happy and suppress the warning. Thanks, Jonathan > --- > drivers/iio/adc/axp20x_adc.c | 123 ++++++++++++++++++++++++++++++++++++- > include/linux/mfd/axp20x.h | 2 +- > 2 files changed, 125 insertions(+) > > diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c > index 3968053..7cdb8bc 100644 > --- a/drivers/iio/adc/axp20x_adc.c > +++ b/drivers/iio/adc/axp20x_adc.c > @@ -35,8 +35,13 @@ > #define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1) > > #define AXP20X_ADC_RATE_MASK GENMASK(7, 6) > +#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4) > +#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK) > #define AXP20X_ADC_RATE_HZ(x) ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK) > #define AXP22X_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK) > +#define AXP813_TS_GPIO0_ADC_RATE_HZ(x) AXP20X_ADC_RATE_HZ(x) > +#define AXP813_V_I_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK) > +#define AXP813_ADC_RATE_HZ(x) (AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x)) > > #define AXP20X_ADC_CHANNEL(_channel, _name, _type, _reg) \ > { \ > @@ -95,6 +100,12 @@ enum axp22x_adc_channel_i { > AXP22X_BATT_DISCHRG_I, > }; > > +enum axp813_adc_channel_v { > + AXP813_TS_IN = 0, > + AXP813_GPIO0_V, > + AXP813_BATT_V, > +}; > + > static struct iio_map axp20x_maps[] = { > { > .consumer_dev_name = "axp20x-usb-power-supply", > @@ -197,6 +208,25 @@ static const struct iio_chan_spec axp22x_adc_channels[] = { > AXP20X_BATT_DISCHRG_I_H), > }; > > +static const struct iio_chan_spec axp813_adc_channels[] = { > + { > + .type = IIO_TEMP, > + .address = AXP22X_PMIC_TEMP_H, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE) | > + BIT(IIO_CHAN_INFO_OFFSET), > + .datasheet_name = "pmic_temp", > + }, > + AXP20X_ADC_CHANNEL(AXP813_GPIO0_V, "gpio0_v", IIO_VOLTAGE, > + AXP288_GP_ADC_H), > + AXP20X_ADC_CHANNEL(AXP813_BATT_V, "batt_v", IIO_VOLTAGE, > + AXP20X_BATT_V_H), > + AXP20X_ADC_CHANNEL(AXP22X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT, > + AXP20X_BATT_CHRG_I_H), > + AXP20X_ADC_CHANNEL(AXP22X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT, > + AXP20X_BATT_DISCHRG_I_H), > +}; > + > static int axp20x_adc_raw(struct iio_dev *indio_dev, > struct iio_chan_spec const *chan, int *val) > { > @@ -243,6 +273,18 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev, > return IIO_VAL_INT; > } > > +static int axp813_adc_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, int *val) > +{ > + struct axp20x_adc_iio *info = iio_priv(indio_dev); > + > + *val = axp20x_read_variable_width(info->regmap, chan->address, 12); > + if (*val < 0) > + return *val; > + > + return IIO_VAL_INT; > +} > + > static int axp20x_adc_scale_voltage(int channel, int *val, int *val2) > { > switch (channel) { > @@ -273,6 +315,24 @@ static int axp20x_adc_scale_voltage(int channel, int *val, int *val2) > } > } > > +static int axp813_adc_scale_voltage(int channel, int *val, int *val2) > +{ > + switch (channel) { > + case AXP813_GPIO0_V: > + *val = 0; > + *val2 = 800000; > + return IIO_VAL_INT_PLUS_MICRO; > + > + case AXP813_BATT_V: > + *val = 1; > + *val2 = 100000; > + return IIO_VAL_INT_PLUS_MICRO; > + > + default: > + return -EINVAL; > + } > +} > + > static int axp20x_adc_scale_current(int channel, int *val, int *val2) > { > switch (channel) { > @@ -342,6 +402,26 @@ static int axp22x_adc_scale(struct iio_chan_spec const *chan, int *val, > } > } > > +static int axp813_adc_scale(struct iio_chan_spec const *chan, int *val, > + int *val2) > +{ > + switch (chan->type) { > + case IIO_VOLTAGE: > + return axp813_adc_scale_voltage(chan->channel, val, val2); > + > + case IIO_CURRENT: > + *val = 1; > + return IIO_VAL_INT; > + > + case IIO_TEMP: > + *val = 100; > + return IIO_VAL_INT; > + > + default: > + return -EINVAL; > + } > +} > + > static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel, > int *val) > { > @@ -425,6 +505,26 @@ static int axp22x_read_raw(struct iio_dev *indio_dev, > } > } > > +static int axp813_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, int *val, > + int *val2, long mask) > +{ > + switch (mask) { > + case IIO_CHAN_INFO_OFFSET: > + *val = -2667; > + return IIO_VAL_INT; > + > + case IIO_CHAN_INFO_SCALE: > + return axp813_adc_scale(chan, val, val2); > + > + case IIO_CHAN_INFO_RAW: > + return axp813_adc_raw(indio_dev, chan, val); > + > + default: > + return -EINVAL; > + } > +} > + > static int axp20x_write_raw(struct iio_dev *indio_dev, > struct iio_chan_spec const *chan, int val, int val2, > long mask) > @@ -470,6 +570,10 @@ static const struct iio_info axp22x_adc_iio_info = { > .read_raw = axp22x_read_raw, > }; > > +static const struct iio_info axp813_adc_iio_info = { > + .read_raw = axp813_read_raw, > +}; > + > static int axp20x_adc_rate(struct axp20x_adc_iio *info, int rate) > { > return regmap_update_bits(info->regmap, AXP20X_ADC_RATE, > @@ -484,6 +588,13 @@ static int axp22x_adc_rate(struct axp20x_adc_iio *info, int rate) > AXP22X_ADC_RATE_HZ(rate)); > } > > +static int axp813_adc_rate(struct axp20x_adc_iio *info, int rate) > +{ > + return regmap_update_bits(info->regmap, AXP813_ADC_RATE, > + AXP813_ADC_RATE_MASK, > + AXP813_ADC_RATE_HZ(rate)); > +} > + > struct axp_data { > const struct iio_info *iio_info; > int num_channels; > @@ -515,9 +626,20 @@ static const struct axp_data axp22x_data = { > .maps = axp22x_maps, > }; > > +static const struct axp_data axp813_data = { > + .iio_info = &axp813_adc_iio_info, > + .num_channels = ARRAY_SIZE(axp813_adc_channels), > + .channels = axp813_adc_channels, > + .adc_en1_mask = AXP22X_ADC_EN1_MASK, > + .adc_rate = axp813_adc_rate, > + .adc_en2 = false, > + .maps = axp22x_maps, > +}; > + > static const struct of_device_id axp20x_adc_of_match[] = { > { .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, }, > { .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, }, > + { .compatible = "x-powers,axp813-adc", .data = (void *)&axp813_data, }, > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, axp20x_adc_of_match); > @@ -525,6 +647,7 @@ MODULE_DEVICE_TABLE(of, axp20x_adc_of_match); > static const struct platform_device_id axp20x_adc_id_match[] = { > { .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, }, > { .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, }, > + { .name = "axp813-adc", .driver_data = (kernel_ulong_t)&axp813_data, }, > { /* sentinel */ }, > }; > MODULE_DEVICE_TABLE(platform, axp20x_adc_id_match); > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h > index 080798f..82bf774 100644 > --- a/include/linux/mfd/axp20x.h > +++ b/include/linux/mfd/axp20x.h > @@ -266,6 +266,8 @@ enum axp20x_variants { > #define AXP288_RT_BATT_V_H 0xa0 > #define AXP288_RT_BATT_V_L 0xa1 > > +#define AXP813_ADC_RATE 0x85 > + > /* Fuel Gauge */ > #define AXP288_FG_RDC1_REG 0xba > #define AXP288_FG_RDC0_REG 0xbb -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jonathan, On Sun, Jan 21, 2018 at 12:26:55PM +0000, Jonathan Cameron wrote: > On Mon, 15 Jan 2018 11:33:41 +0100 > Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > > > The X-Powers AXP813 PMIC is really close to what is already done for > > AXP20X/AXP22X. > > > > There are two pairs of bits to set the rate (one for Voltage and Current > > measurements and one for TS/GPIO0 voltage measurements) instead of one. > > > > The register to set the ADC rates is different from the one for > > AXP20X/AXP22X. > > > > GPIO0 can be used as an ADC (measuring Volts) unlike for AXP22X. > > > > The scales to apply to the different inputs are unlike the ones from > > AXP20X and AXP22X. > > > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > > Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Applied to the togreg branch of iio.git and pushed out as testing > for the autobuilders to play with it. > > One thing that might be nice to tidy up in this driver though. > > CHECK drivers/iio/adc/axp20x_adc.c > drivers/iio/adc/axp20x_adc.c:548:26: warning: dubious: !x & y > drivers/iio/adc/axp20x_adc.c:553:26: warning: dubious: !x & y > > Those are 'interesting' code constructions. It may be worth being > a little more verbose to keep sparse happy and suppress the > warning. > Would adding a val = !!val; before the call to the macro be "verbose" enough for you? Sparse does not complain anymore after that. Thanks, Quentin > Thanks, > > Jonathan > > > --- > > drivers/iio/adc/axp20x_adc.c | 123 ++++++++++++++++++++++++++++++++++++- > > include/linux/mfd/axp20x.h | 2 +- > > 2 files changed, 125 insertions(+) > > > > diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c > > index 3968053..7cdb8bc 100644 > > --- a/drivers/iio/adc/axp20x_adc.c > > +++ b/drivers/iio/adc/axp20x_adc.c > > @@ -35,8 +35,13 @@ > > #define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1) > > > > #define AXP20X_ADC_RATE_MASK GENMASK(7, 6) > > +#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4) > > +#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK) > > #define AXP20X_ADC_RATE_HZ(x) ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK) > > #define AXP22X_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK) > > +#define AXP813_TS_GPIO0_ADC_RATE_HZ(x) AXP20X_ADC_RATE_HZ(x) > > +#define AXP813_V_I_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK) > > +#define AXP813_ADC_RATE_HZ(x) (AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x)) > > > > #define AXP20X_ADC_CHANNEL(_channel, _name, _type, _reg) \ > > { \ > > @@ -95,6 +100,12 @@ enum axp22x_adc_channel_i { > > AXP22X_BATT_DISCHRG_I, > > }; > > > > +enum axp813_adc_channel_v { > > + AXP813_TS_IN = 0, > > + AXP813_GPIO0_V, > > + AXP813_BATT_V, > > +}; > > + > > static struct iio_map axp20x_maps[] = { > > { > > .consumer_dev_name = "axp20x-usb-power-supply", > > @@ -197,6 +208,25 @@ static const struct iio_chan_spec axp22x_adc_channels[] = { > > AXP20X_BATT_DISCHRG_I_H), > > }; > > > > +static const struct iio_chan_spec axp813_adc_channels[] = { > > + { > > + .type = IIO_TEMP, > > + .address = AXP22X_PMIC_TEMP_H, > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > > + BIT(IIO_CHAN_INFO_SCALE) | > > + BIT(IIO_CHAN_INFO_OFFSET), > > + .datasheet_name = "pmic_temp", > > + }, > > + AXP20X_ADC_CHANNEL(AXP813_GPIO0_V, "gpio0_v", IIO_VOLTAGE, > > + AXP288_GP_ADC_H), > > + AXP20X_ADC_CHANNEL(AXP813_BATT_V, "batt_v", IIO_VOLTAGE, > > + AXP20X_BATT_V_H), > > + AXP20X_ADC_CHANNEL(AXP22X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT, > > + AXP20X_BATT_CHRG_I_H), > > + AXP20X_ADC_CHANNEL(AXP22X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT, > > + AXP20X_BATT_DISCHRG_I_H), > > +}; > > + > > static int axp20x_adc_raw(struct iio_dev *indio_dev, > > struct iio_chan_spec const *chan, int *val) > > { > > @@ -243,6 +273,18 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev, > > return IIO_VAL_INT; > > } > > > > +static int axp813_adc_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, int *val) > > +{ > > + struct axp20x_adc_iio *info = iio_priv(indio_dev); > > + > > + *val = axp20x_read_variable_width(info->regmap, chan->address, 12); > > + if (*val < 0) > > + return *val; > > + > > + return IIO_VAL_INT; > > +} > > + > > static int axp20x_adc_scale_voltage(int channel, int *val, int *val2) > > { > > switch (channel) { > > @@ -273,6 +315,24 @@ static int axp20x_adc_scale_voltage(int channel, int *val, int *val2) > > } > > } > > > > +static int axp813_adc_scale_voltage(int channel, int *val, int *val2) > > +{ > > + switch (channel) { > > + case AXP813_GPIO0_V: > > + *val = 0; > > + *val2 = 800000; > > + return IIO_VAL_INT_PLUS_MICRO; > > + > > + case AXP813_BATT_V: > > + *val = 1; > > + *val2 = 100000; > > + return IIO_VAL_INT_PLUS_MICRO; > > + > > + default: > > + return -EINVAL; > > + } > > +} > > + > > static int axp20x_adc_scale_current(int channel, int *val, int *val2) > > { > > switch (channel) { > > @@ -342,6 +402,26 @@ static int axp22x_adc_scale(struct iio_chan_spec const *chan, int *val, > > } > > } > > > > +static int axp813_adc_scale(struct iio_chan_spec const *chan, int *val, > > + int *val2) > > +{ > > + switch (chan->type) { > > + case IIO_VOLTAGE: > > + return axp813_adc_scale_voltage(chan->channel, val, val2); > > + > > + case IIO_CURRENT: > > + *val = 1; > > + return IIO_VAL_INT; > > + > > + case IIO_TEMP: > > + *val = 100; > > + return IIO_VAL_INT; > > + > > + default: > > + return -EINVAL; > > + } > > +} > > + > > static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel, > > int *val) > > { > > @@ -425,6 +505,26 @@ static int axp22x_read_raw(struct iio_dev *indio_dev, > > } > > } > > > > +static int axp813_read_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, int *val, > > + int *val2, long mask) > > +{ > > + switch (mask) { > > + case IIO_CHAN_INFO_OFFSET: > > + *val = -2667; > > + return IIO_VAL_INT; > > + > > + case IIO_CHAN_INFO_SCALE: > > + return axp813_adc_scale(chan, val, val2); > > + > > + case IIO_CHAN_INFO_RAW: > > + return axp813_adc_raw(indio_dev, chan, val); > > + > > + default: > > + return -EINVAL; > > + } > > +} > > + > > static int axp20x_write_raw(struct iio_dev *indio_dev, > > struct iio_chan_spec const *chan, int val, int val2, > > long mask) > > @@ -470,6 +570,10 @@ static const struct iio_info axp22x_adc_iio_info = { > > .read_raw = axp22x_read_raw, > > }; > > > > +static const struct iio_info axp813_adc_iio_info = { > > + .read_raw = axp813_read_raw, > > +}; > > + > > static int axp20x_adc_rate(struct axp20x_adc_iio *info, int rate) > > { > > return regmap_update_bits(info->regmap, AXP20X_ADC_RATE, > > @@ -484,6 +588,13 @@ static int axp22x_adc_rate(struct axp20x_adc_iio *info, int rate) > > AXP22X_ADC_RATE_HZ(rate)); > > } > > > > +static int axp813_adc_rate(struct axp20x_adc_iio *info, int rate) > > +{ > > + return regmap_update_bits(info->regmap, AXP813_ADC_RATE, > > + AXP813_ADC_RATE_MASK, > > + AXP813_ADC_RATE_HZ(rate)); > > +} > > + > > struct axp_data { > > const struct iio_info *iio_info; > > int num_channels; > > @@ -515,9 +626,20 @@ static const struct axp_data axp22x_data = { > > .maps = axp22x_maps, > > }; > > > > +static const struct axp_data axp813_data = { > > + .iio_info = &axp813_adc_iio_info, > > + .num_channels = ARRAY_SIZE(axp813_adc_channels), > > + .channels = axp813_adc_channels, > > + .adc_en1_mask = AXP22X_ADC_EN1_MASK, > > + .adc_rate = axp813_adc_rate, > > + .adc_en2 = false, > > + .maps = axp22x_maps, > > +}; > > + > > static const struct of_device_id axp20x_adc_of_match[] = { > > { .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, }, > > { .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, }, > > + { .compatible = "x-powers,axp813-adc", .data = (void *)&axp813_data, }, > > { /* sentinel */ } > > }; > > MODULE_DEVICE_TABLE(of, axp20x_adc_of_match); > > @@ -525,6 +647,7 @@ MODULE_DEVICE_TABLE(of, axp20x_adc_of_match); > > static const struct platform_device_id axp20x_adc_id_match[] = { > > { .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, }, > > { .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, }, > > + { .name = "axp813-adc", .driver_data = (kernel_ulong_t)&axp813_data, }, > > { /* sentinel */ }, > > }; > > MODULE_DEVICE_TABLE(platform, axp20x_adc_id_match); > > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h > > index 080798f..82bf774 100644 > > --- a/include/linux/mfd/axp20x.h > > +++ b/include/linux/mfd/axp20x.h > > @@ -266,6 +266,8 @@ enum axp20x_variants { > > #define AXP288_RT_BATT_V_H 0xa0 > > #define AXP288_RT_BATT_V_L 0xa1 > > > > +#define AXP813_ADC_RATE 0x85 > > + > > /* Fuel Gauge */ > > #define AXP288_FG_RDC1_REG 0xba > > #define AXP288_FG_RDC0_REG 0xbb >
On Mon, 15 Jan 2018, Quentin Schulz wrote: > This makes the axp20x_adc driver probe with platform device id > "axp813-adc". > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > --- > drivers/mfd/axp20x.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) For my own reference: Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
On Mon, 15 Jan 2018, Quentin Schulz wrote: > This makes AXP209 and AXP22x ADCs probe first via DT and then by > fallback via platform. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > --- > drivers/mfd/axp20x.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) For my own reference: Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
On Tue, Jan 23, 2018 at 5:54 PM, Lee Jones <lee.jones@linaro.org> wrote: > On Mon, 15 Jan 2018, Quentin Schulz wrote: > >> This makes AXP209 and AXP22x ADCs probe first via DT and then by >> fallback via platform. >> >> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> >> --- >> drivers/mfd/axp20x.c | 5 ++++- >> 1 file changed, 4 insertions(+), 1 deletion(-) > > For my own reference: > Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Acked-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jan 23, 2018 at 5:53 PM, Lee Jones <lee.jones@linaro.org> wrote: > On Mon, 15 Jan 2018, Quentin Schulz wrote: > >> This makes the axp20x_adc driver probe with platform device id >> "axp813-adc". >> >> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> >> --- >> drivers/mfd/axp20x.c | 5 ++++- >> 1 file changed, 4 insertions(+), 1 deletion(-) > > For my own reference: > Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Acked-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 15, 2018 at 6:33 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > This adds a DT node for the ADC of the PMIC so that there can be > consumers of its IIO channels declaring their consumptions via DT. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 15, 2018 at 6:33 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > This adds a DT node for the ADC of the PMIC so that there can be > consumers of its IIO channels declaring their consumptions via DT. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 15, 2018 at 6:33 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > This adds a DT node for the ADC of the PMIC so that there can be > consumers of its IIO channels declaring their consumptions via DT. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 15, 2018 at 6:33 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > variant specific code Your subject somehow got wrapped incorrectly. > > We used to use IDs to select a function or a feature depending on the > variant. It's easier to maintain the code by adding data structure > storing the few differences between variants so that we don't add a pile > of if conditions. > > Let's use this data structure and update the code to use it. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > --- > drivers/power/supply/axp20x_battery.c | 100 +++++++++++++++++---------- > 1 file changed, 66 insertions(+), 34 deletions(-) > > diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c > index 7494f0f..d73c78f 100644 > --- a/drivers/power/supply/axp20x_battery.c > +++ b/drivers/power/supply/axp20x_battery.c > @@ -53,6 +53,16 @@ > > #define AXP20X_V_OFF_MASK GENMASK(2, 0) > > +struct axp20x_batt_ps; > + > +struct axp_data { > + int ccc_scale; > + int ccc_offset; > + bool has_fg_valid; > + int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val); > + int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val); > +}; > + > struct axp20x_batt_ps { > struct regmap *regmap; > struct power_supply *batt; > @@ -62,7 +72,7 @@ struct axp20x_batt_ps { > struct iio_channel *batt_v; > /* Maximum constant charge current */ > unsigned int max_ccc; > - u8 axp_id; > + struct axp_data *data; const. > }; > > static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > @@ -123,22 +133,6 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > return 0; > } > > -static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val) > -{ > - if (axp->axp_id == AXP209_ID) > - *val = *val * 100000 + 300000; > - else > - *val = *val * 150000 + 300000; > -} > - > -static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val) > -{ > - if (axp->axp_id == AXP209_ID) > - *val = (*val - 300000) / 100000; > - else > - *val = (*val - 300000) / 150000; > -} > - > static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp, > int *val) > { > @@ -150,7 +144,7 @@ static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp, > > *val &= AXP20X_CHRG_CTRL1_TGT_CURR; > > - raw_to_constant_charge_current(axp, val); > + *val = *val * axp->data->ccc_scale + axp->data->ccc_offset; > > return 0; > } > @@ -269,8 +263,7 @@ static int axp20x_battery_get_prop(struct power_supply *psy, > if (ret) > return ret; > > - if (axp20x_batt->axp_id == AXP221_ID && > - !(reg & AXP22X_FG_VALID)) > + if (axp20x_batt->data->has_fg_valid && !(reg & AXP22X_FG_VALID)) > return -EINVAL; > > /* > @@ -281,11 +274,8 @@ static int axp20x_battery_get_prop(struct power_supply *psy, > break; > > case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: > - if (axp20x_batt->axp_id == AXP209_ID) > - return axp20x_battery_get_max_voltage(axp20x_batt, > - &val->intval); > - return axp22x_battery_get_max_voltage(axp20x_batt, > - &val->intval); > + return axp20x_batt->data->get_max_voltage(axp20x_batt, > + &val->intval); > > case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: > ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, ®); > @@ -312,6 +302,32 @@ static int axp20x_battery_get_prop(struct power_supply *psy, > return 0; > } > > +static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > + int val) > +{ > + switch (val) { > + case 4100000: > + val = AXP20X_CHRG_CTRL1_TGT_4_1V; > + break; > + > + case 4200000: > + val = AXP20X_CHRG_CTRL1_TGT_4_2V; > + break; > + > + default: > + /* > + * AXP20x max voltage can be set to 4.36V and AXP22X max voltage > + * can be set to 4.22V and 4.24V, but these voltages are too > + * high for Lithium based batteries (AXP PMICs are supposed to > + * be used with these kinds of battery). > + */ > + return -EINVAL; > + } > + > + return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, > + AXP20X_CHRG_CTRL1_TGT_VOLT, val); > +} > + > static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > int val) > { > @@ -321,9 +337,6 @@ static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > break; > > case 4150000: > - if (axp20x_batt->axp_id == AXP221_ID) > - return -EINVAL; > - > val = AXP20X_CHRG_CTRL1_TGT_4_15V; > break; > > @@ -351,7 +364,8 @@ static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, > if (charge_current > axp_batt->max_ccc) > return -EINVAL; > > - constant_charge_current_to_raw(axp_batt, &charge_current); > + charge_current = (charge_current - axp_batt->data->ccc_offset) / > + axp_batt->data->ccc_scale; > > if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0) > return -EINVAL; > @@ -365,12 +379,14 @@ static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp, > { > bool lower_max = false; > > - constant_charge_current_to_raw(axp, &charge_current); > + charge_current = (charge_current - axp->data->ccc_offset) / > + axp->data->ccc_scale; > > if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0) > return -EINVAL; > > - raw_to_constant_charge_current(axp, &charge_current); > + charge_current = charge_current * axp->data->ccc_scale + > + axp->data->ccc_offset; > > if (charge_current > axp->max_ccc) > dev_warn(axp->dev, > @@ -460,13 +476,28 @@ static const struct power_supply_desc axp20x_batt_ps_desc = { > .set_property = axp20x_battery_set_prop, > }; > > +struct axp_data axp209_data = { const. > + .ccc_scale = 100000, > + .ccc_offset = 300000, > + .get_max_voltage = axp20x_battery_get_max_voltage, > + .set_max_voltage = axp20x_battery_set_max_voltage, > +}; > + > +struct axp_data axp221_data = { const. > + .ccc_scale = 150000, > + .ccc_offset = 300000, > + .has_fg_valid = true, > + .get_max_voltage = axp22x_battery_get_max_voltage, > + .set_max_voltage = axp22x_battery_set_max_voltage, > +}; > + > static const struct of_device_id axp20x_battery_ps_id[] = { > { > .compatible = "x-powers,axp209-battery-power-supply", > - .data = (void *)AXP209_ID, > + .data = (void *)&axp209_data, > }, { > .compatible = "x-powers,axp221-battery-power-supply", > - .data = (void *)AXP221_ID, > + .data = (void *)&axp221_data, > }, { /* sentinel */ }, > }; > MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id); > @@ -476,6 +507,7 @@ static int axp20x_power_probe(struct platform_device *pdev) > struct axp20x_batt_ps *axp20x_batt; > struct power_supply_config psy_cfg = {}; > struct power_supply_battery_info info; > + struct device *dev = &pdev->dev; > > if (!of_device_is_available(pdev->dev.of_node)) > return -ENODEV; > @@ -516,7 +548,7 @@ static int axp20x_power_probe(struct platform_device *pdev) > psy_cfg.drv_data = axp20x_batt; > psy_cfg.of_node = pdev->dev.of_node; > > - axp20x_batt->axp_id = (uintptr_t)of_device_get_match_data(&pdev->dev); > + axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev); const in the cast. Otherwise, Reviewed-by: Chen-Yu Tsai <wens@csie.org> > > axp20x_batt->batt = devm_power_supply_register(&pdev->dev, > &axp20x_batt_ps_desc, > -- > git-series 0.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 15, 2018 at 6:33 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > The X-Powers AXP813 PMIC has got some slight differences from > AXP20X/AXP22X PMICs: > - the maximum voltage supplied by the PMIC is 4.35 instead of 4.36/4.24 > for AXP20X/AXP22X, > - the constant charge current formula is different, > > It also has a bit to tell whether the battery percentage returned by the > PMIC is valid. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 15, 2018 at 6:33 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > As axp20x-battery-power-supply now supports AXP813, add a cell for it. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Acked-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 15, 2018 at 6:33 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > The X-Powers AXP81X PMIC exposes battery supply various data such as > the battery status (charging, discharging, full, dead), current max > limit, current current, battery capacity (in percentage), voltage max > and min limits, current voltage, and battery capacity (in Ah). > > This adds the battery power supply subnode for AXP81X PMIC. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 15, 2018 at 6:33 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > The TBS A711 has an AXP813 PMIC and a soldered battery, thus, we enable > the battery power supply subnode in its Device Tree. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 15, 2018 at 6:33 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > The DT node should be named after its functionality and not after the > IP it's defining. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 15, 2018 at 6:33 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > The AXP813 PMIC is relatively close to the already supported AXP20X and > AXP22X. It provides three different power outputs: battery, AC and USB, and > measures a few different things: temperature, power supply status, current > current and voltage supplied, maximum current limit, battery capacity, min > and max voltage limits. > > One of its two GPIOs can be used as an ADC. > > There are a few differences with AXP20X/AXP22X PMICs though: > - a different constant charge current formula, > - battery temperature, GPIO0 and battery voltages are the only voltages > measurable, > - all data are stored on 12 bits (AXP20X/AXP22X had one type of data that > was stored on 13 bits), > - different scales and offsets, > - a different ADC rate formula and register, > > This patch series adds support for the PMIC's ADC and battery power supply > in the existing drivers. > > Make the axp20x MFD automatically probe the ADC driver, add the battery > power supply node in axp81x node and enable it for the TBS A711 since it > has a soldered battery. > > I suggest patches: > - 4,5,8,14,15,16 go through Maxime and Chen-Yu's tree, > - 1,2,3,7 go through Jonathan's tree, > - 6,9,13 go through Lee's tree, > - 10,11,12 go through Sebastian's tree, I think I've reviewed or acked all the patches that haven't been merged. The different drivers are bound together through the device tree, so the various patches are safe to go through their respective trees, as Quentin suggested. Thanks! ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 22 Jan 2018 09:22:25 +0100 Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > Hi Jonathan, > > On Sun, Jan 21, 2018 at 12:26:55PM +0000, Jonathan Cameron wrote: > > On Mon, 15 Jan 2018 11:33:41 +0100 > > Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > > > > > The X-Powers AXP813 PMIC is really close to what is already done for > > > AXP20X/AXP22X. > > > > > > There are two pairs of bits to set the rate (one for Voltage and Current > > > measurements and one for TS/GPIO0 voltage measurements) instead of one. > > > > > > The register to set the ADC rates is different from the one for > > > AXP20X/AXP22X. > > > > > > GPIO0 can be used as an ADC (measuring Volts) unlike for AXP22X. > > > > > > The scales to apply to the different inputs are unlike the ones from > > > AXP20X and AXP22X. > > > > > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > > > Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > Applied to the togreg branch of iio.git and pushed out as testing > > for the autobuilders to play with it. > > > > One thing that might be nice to tidy up in this driver though. > > > > CHECK drivers/iio/adc/axp20x_adc.c > > drivers/iio/adc/axp20x_adc.c:548:26: warning: dubious: !x & y > > drivers/iio/adc/axp20x_adc.c:553:26: warning: dubious: !x & y > > > > Those are 'interesting' code constructions. It may be worth being > > a little more verbose to keep sparse happy and suppress the > > warning. > > > > Would adding a val = !!val; before the call to the macro be "verbose" > enough for you? > > Sparse does not complain anymore after that. I'd just use a good old fashioned if statement. Few more lines of code but clearer and will keep sparse happy. Jonathan > > Thanks, > Quentin > > > Thanks, > > > > Jonathan > > > > > --- > > > drivers/iio/adc/axp20x_adc.c | 123 ++++++++++++++++++++++++++++++++++++- > > > include/linux/mfd/axp20x.h | 2 +- > > > 2 files changed, 125 insertions(+) > > > > > > diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c > > > index 3968053..7cdb8bc 100644 > > > --- a/drivers/iio/adc/axp20x_adc.c > > > +++ b/drivers/iio/adc/axp20x_adc.c > > > @@ -35,8 +35,13 @@ > > > #define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1) > > > > > > #define AXP20X_ADC_RATE_MASK GENMASK(7, 6) > > > +#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4) > > > +#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK) > > > #define AXP20X_ADC_RATE_HZ(x) ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK) > > > #define AXP22X_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK) > > > +#define AXP813_TS_GPIO0_ADC_RATE_HZ(x) AXP20X_ADC_RATE_HZ(x) > > > +#define AXP813_V_I_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK) > > > +#define AXP813_ADC_RATE_HZ(x) (AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x)) > > > > > > #define AXP20X_ADC_CHANNEL(_channel, _name, _type, _reg) \ > > > { \ > > > @@ -95,6 +100,12 @@ enum axp22x_adc_channel_i { > > > AXP22X_BATT_DISCHRG_I, > > > }; > > > > > > +enum axp813_adc_channel_v { > > > + AXP813_TS_IN = 0, > > > + AXP813_GPIO0_V, > > > + AXP813_BATT_V, > > > +}; > > > + > > > static struct iio_map axp20x_maps[] = { > > > { > > > .consumer_dev_name = "axp20x-usb-power-supply", > > > @@ -197,6 +208,25 @@ static const struct iio_chan_spec axp22x_adc_channels[] = { > > > AXP20X_BATT_DISCHRG_I_H), > > > }; > > > > > > +static const struct iio_chan_spec axp813_adc_channels[] = { > > > + { > > > + .type = IIO_TEMP, > > > + .address = AXP22X_PMIC_TEMP_H, > > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > > > + BIT(IIO_CHAN_INFO_SCALE) | > > > + BIT(IIO_CHAN_INFO_OFFSET), > > > + .datasheet_name = "pmic_temp", > > > + }, > > > + AXP20X_ADC_CHANNEL(AXP813_GPIO0_V, "gpio0_v", IIO_VOLTAGE, > > > + AXP288_GP_ADC_H), > > > + AXP20X_ADC_CHANNEL(AXP813_BATT_V, "batt_v", IIO_VOLTAGE, > > > + AXP20X_BATT_V_H), > > > + AXP20X_ADC_CHANNEL(AXP22X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT, > > > + AXP20X_BATT_CHRG_I_H), > > > + AXP20X_ADC_CHANNEL(AXP22X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT, > > > + AXP20X_BATT_DISCHRG_I_H), > > > +}; > > > + > > > static int axp20x_adc_raw(struct iio_dev *indio_dev, > > > struct iio_chan_spec const *chan, int *val) > > > { > > > @@ -243,6 +273,18 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev, > > > return IIO_VAL_INT; > > > } > > > > > > +static int axp813_adc_raw(struct iio_dev *indio_dev, > > > + struct iio_chan_spec const *chan, int *val) > > > +{ > > > + struct axp20x_adc_iio *info = iio_priv(indio_dev); > > > + > > > + *val = axp20x_read_variable_width(info->regmap, chan->address, 12); > > > + if (*val < 0) > > > + return *val; > > > + > > > + return IIO_VAL_INT; > > > +} > > > + > > > static int axp20x_adc_scale_voltage(int channel, int *val, int *val2) > > > { > > > switch (channel) { > > > @@ -273,6 +315,24 @@ static int axp20x_adc_scale_voltage(int channel, int *val, int *val2) > > > } > > > } > > > > > > +static int axp813_adc_scale_voltage(int channel, int *val, int *val2) > > > +{ > > > + switch (channel) { > > > + case AXP813_GPIO0_V: > > > + *val = 0; > > > + *val2 = 800000; > > > + return IIO_VAL_INT_PLUS_MICRO; > > > + > > > + case AXP813_BATT_V: > > > + *val = 1; > > > + *val2 = 100000; > > > + return IIO_VAL_INT_PLUS_MICRO; > > > + > > > + default: > > > + return -EINVAL; > > > + } > > > +} > > > + > > > static int axp20x_adc_scale_current(int channel, int *val, int *val2) > > > { > > > switch (channel) { > > > @@ -342,6 +402,26 @@ static int axp22x_adc_scale(struct iio_chan_spec const *chan, int *val, > > > } > > > } > > > > > > +static int axp813_adc_scale(struct iio_chan_spec const *chan, int *val, > > > + int *val2) > > > +{ > > > + switch (chan->type) { > > > + case IIO_VOLTAGE: > > > + return axp813_adc_scale_voltage(chan->channel, val, val2); > > > + > > > + case IIO_CURRENT: > > > + *val = 1; > > > + return IIO_VAL_INT; > > > + > > > + case IIO_TEMP: > > > + *val = 100; > > > + return IIO_VAL_INT; > > > + > > > + default: > > > + return -EINVAL; > > > + } > > > +} > > > + > > > static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel, > > > int *val) > > > { > > > @@ -425,6 +505,26 @@ static int axp22x_read_raw(struct iio_dev *indio_dev, > > > } > > > } > > > > > > +static int axp813_read_raw(struct iio_dev *indio_dev, > > > + struct iio_chan_spec const *chan, int *val, > > > + int *val2, long mask) > > > +{ > > > + switch (mask) { > > > + case IIO_CHAN_INFO_OFFSET: > > > + *val = -2667; > > > + return IIO_VAL_INT; > > > + > > > + case IIO_CHAN_INFO_SCALE: > > > + return axp813_adc_scale(chan, val, val2); > > > + > > > + case IIO_CHAN_INFO_RAW: > > > + return axp813_adc_raw(indio_dev, chan, val); > > > + > > > + default: > > > + return -EINVAL; > > > + } > > > +} > > > + > > > static int axp20x_write_raw(struct iio_dev *indio_dev, > > > struct iio_chan_spec const *chan, int val, int val2, > > > long mask) > > > @@ -470,6 +570,10 @@ static const struct iio_info axp22x_adc_iio_info = { > > > .read_raw = axp22x_read_raw, > > > }; > > > > > > +static const struct iio_info axp813_adc_iio_info = { > > > + .read_raw = axp813_read_raw, > > > +}; > > > + > > > static int axp20x_adc_rate(struct axp20x_adc_iio *info, int rate) > > > { > > > return regmap_update_bits(info->regmap, AXP20X_ADC_RATE, > > > @@ -484,6 +588,13 @@ static int axp22x_adc_rate(struct axp20x_adc_iio *info, int rate) > > > AXP22X_ADC_RATE_HZ(rate)); > > > } > > > > > > +static int axp813_adc_rate(struct axp20x_adc_iio *info, int rate) > > > +{ > > > + return regmap_update_bits(info->regmap, AXP813_ADC_RATE, > > > + AXP813_ADC_RATE_MASK, > > > + AXP813_ADC_RATE_HZ(rate)); > > > +} > > > + > > > struct axp_data { > > > const struct iio_info *iio_info; > > > int num_channels; > > > @@ -515,9 +626,20 @@ static const struct axp_data axp22x_data = { > > > .maps = axp22x_maps, > > > }; > > > > > > +static const struct axp_data axp813_data = { > > > + .iio_info = &axp813_adc_iio_info, > > > + .num_channels = ARRAY_SIZE(axp813_adc_channels), > > > + .channels = axp813_adc_channels, > > > + .adc_en1_mask = AXP22X_ADC_EN1_MASK, > > > + .adc_rate = axp813_adc_rate, > > > + .adc_en2 = false, > > > + .maps = axp22x_maps, > > > +}; > > > + > > > static const struct of_device_id axp20x_adc_of_match[] = { > > > { .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, }, > > > { .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, }, > > > + { .compatible = "x-powers,axp813-adc", .data = (void *)&axp813_data, }, > > > { /* sentinel */ } > > > }; > > > MODULE_DEVICE_TABLE(of, axp20x_adc_of_match); > > > @@ -525,6 +647,7 @@ MODULE_DEVICE_TABLE(of, axp20x_adc_of_match); > > > static const struct platform_device_id axp20x_adc_id_match[] = { > > > { .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, }, > > > { .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, }, > > > + { .name = "axp813-adc", .driver_data = (kernel_ulong_t)&axp813_data, }, > > > { /* sentinel */ }, > > > }; > > > MODULE_DEVICE_TABLE(platform, axp20x_adc_id_match); > > > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h > > > index 080798f..82bf774 100644 > > > --- a/include/linux/mfd/axp20x.h > > > +++ b/include/linux/mfd/axp20x.h > > > @@ -266,6 +266,8 @@ enum axp20x_variants { > > > #define AXP288_RT_BATT_V_H 0xa0 > > > #define AXP288_RT_BATT_V_L 0xa1 > > > > > > +#define AXP813_ADC_RATE 0x85 > > > + > > > /* Fuel Gauge */ > > > #define AXP288_FG_RDC1_REG 0xba > > > #define AXP288_FG_RDC0_REG 0xbb > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html