Message ID | VI1PR0701MB25735015FB051BFE7FC35F16EF160@VI1PR0701MB2573.eurprd07.prod.outlook.com |
---|---|
State | Superseded |
Delegated to: | John Crispin |
Headers | show |
Series | [LEDE-DEV,v3] ar71xx: add ew-balin platform from Embedded Wireless | expand |
Hi, few small comments inline. On 11/01/18 11:27, Catrinel Catrinescu wrote: > Add the Embedded Wireless "Balin" platform, based on AR9344: > http://www.embeddedwireless.de/uploads/Balin_data_2016_10.pdf Can you please write the HW spec into the commit message ? the PDF link might be gone one day. > > The module comes already with the current vanilla OpenWRT firmware, > so no need to install "factory"-image, or any other stuff:-) > > Signed-off-by: Catrinel Catrinescu <cc@80211.de> > --- > .../linux/ar71xx/base-files/etc/board.d/02_network | 6 ++ > target/linux/ar71xx/base-files/etc/diag.sh | 3 + > .../etc/uci-defaults/03_network-switchX-migration | 1 + > target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + > .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + > target/linux/ar71xx/config-4.4 | 1 + > target/linux/ar71xx/config-4.9 | 1 + > .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 ++ > target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 + > .../ar71xx/files/arch/mips/ath79/mach-ew-balin.c | 112 +++++++++++++++++++++ > .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 + > target/linux/ar71xx/image/generic.mk | 9 ++ > target/linux/ar71xx/mikrotik/config-default | 1 + > target/linux/ar71xx/nand/config-default | 1 + > 14 files changed, 152 insertions(+) > create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c > [...] > diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration > index 29fdde40a0..898082f552 100644 > --- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration > +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration > @@ -53,6 +53,7 @@ dir-615-e1|\ > dir-615-e4|\ > dir-825-c1|\ > ebr-2310-c1|\ > +ew-balin|\ > ew-dorin|\ > ew-dorin-router|\ > ja76pf|\ no need to add switch migration for new boards. please drop this part of the patch. John > diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh > index b5440230a5..162742a94c 100755 > --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh > +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh > @@ -640,6 +640,9 @@ ar71xx_board_detect() { > *"EL-MINI") > name="el-mini" > ;; > + *EmbWir-Balin) > + name="ew-balin" > + ;; > *"EmbWir-Dorin") > name="ew-dorin" > ;; > diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh > index ecf6820a2b..9dceadc563 100755 > --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh > +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh > @@ -237,6 +237,7 @@ platform_check_image() { > epg5000|\ > esr1750|\ > esr900|\ > + ew-balin|\ > ew-dorin|\ > ew-dorin-router|\ > gl-ar150|\ > diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 > index 5a8004a03e..36b266f21c 100644 > --- a/target/linux/ar71xx/config-4.4 > +++ b/target/linux/ar71xx/config-4.4 > @@ -109,6 +109,7 @@ CONFIG_ATH79_MACH_ENS202EXT=y > CONFIG_ATH79_MACH_EPG5000=y > CONFIG_ATH79_MACH_ESR1750=y > CONFIG_ATH79_MACH_ESR900=y > +CONFIG_ATH79_MACH_EW_BALIN=y > CONFIG_ATH79_MACH_EW_DORIN=y > CONFIG_ATH79_MACH_F9K1115V2=y > CONFIG_ATH79_MACH_FRITZ300E=y > diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 > index 4334d25b80..d51fe5f797 100644 > --- a/target/linux/ar71xx/config-4.9 > +++ b/target/linux/ar71xx/config-4.9 > @@ -107,6 +107,7 @@ CONFIG_ATH79_MACH_ENS202EXT=y > CONFIG_ATH79_MACH_EPG5000=y > CONFIG_ATH79_MACH_ESR1750=y > CONFIG_ATH79_MACH_ESR900=y > +CONFIG_ATH79_MACH_EW_BALIN=y > CONFIG_ATH79_MACH_EW_DORIN=y > CONFIG_ATH79_MACH_F9K1115V2=y > CONFIG_ATH79_MACH_FRITZ300E=y > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt > index 1198fcb74b..a94c5a3a2e 100644 > --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt > +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt > @@ -702,6 +702,17 @@ config ATH79_MACH_ESR900 > select ATH79_DEV_WMAC > select ATH79_NVRAM > > +config ATH79_MACH_EW_BALIN > + bool "embedded wireless Balin Platform support" > + select SOC_AR934X > + select ATH79_DEV_M25P80 > + select ATH79_DEV_GPIO_BUTTONS > + select ATH79_DEV_LEDS_GPIO > + select ATH79_DEV_WMAC > + select ATH79_DEV_ETH > + select ATH79_DEV_USB > + select ATH79_DEV_AP9X_PCI if PCI > + > config ATH79_MACH_EW_DORIN > bool "embedded wireless Dorin Platform support" > select SOC_AR933X > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile > index 455af762e3..bde1b75308 100644 > --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile > +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile > @@ -115,6 +115,7 @@ obj-$(CONFIG_ATH79_MACH_ENS202EXT) += mach-ens202ext.o > obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o > obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o > obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o > +obj-$(CONFIG_ATH79_MACH_EW_BALIN) += mach-ew-balin.o > obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o > obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o > obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c > new file mode 100644 > index 0000000000..7d7f38c1d2 > --- /dev/null > +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c > @@ -0,0 +1,112 @@ > +/* > + * EW Balin board support > + * (based on Atheros DB120 reference board support) > + * > + * Copyright (c) 2011 Qualcomm Atheros > + * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> > + * Copyright (C) 2017 Embedded Wireless GmbH www.80211.de > + * > + * Permission to use, copy, modify, and/or distribute this software for any > + * purpose with or without fee is hereby granted, provided that the above > + * copyright notice and this permission notice appear in all copies. > + * > + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES > + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF > + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR > + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES > + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN > + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF > + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > + * > + */ > + > +#include <linux/pci.h> > +#include <linux/phy.h> > +#include <linux/platform_device.h> > +#include <linux/ath9k_platform.h> > +#include <linux/ar8216_platform.h> > + > +#include <asm/mach-ath79/ar71xx_regs.h> > + > +#include "common.h" > +#include "dev-ap9x-pci.h" > +#include "dev-eth.h" > +#include "dev-gpio-buttons.h" > +#include "dev-leds-gpio.h" > +#include "dev-m25p80.h" > +#include "dev-spi.h" > +#include "dev-usb.h" > +#include "dev-wmac.h" > +#include "machtypes.h" > +#include "pci.h" > + > +#define BALIN_GPIO_LED_STATUS 14 > + > +#define BALIN_GPIO_BTN_WPS 18 > + > +#define BALIN_KEYS_POLL_INTERVAL 20 /* msecs */ > +#define BALIN_KEYS_DEBOUNCE_INTERVAL (3 * BALIN_KEYS_POLL_INTERVAL) > + > +#define BALIN_CALDATA_OFFSET 0x1000 > +#define BALIN_WMAC_MAC_OFFSET (BALIN_CALDATA_OFFSET + 0x02) > + > +static struct gpio_led balin_leds_gpio[] __initdata = { > + { > + .name = "balin:green:status", > + .gpio = BALIN_GPIO_LED_STATUS, > + .active_low = 1, > + }, > +}; > + > +static struct gpio_keys_button balin_gpio_keys[] __initdata = { > + { > + .desc = "WPS button", > + .type = EV_KEY, > + .code = KEY_WPS_BUTTON, > + .debounce_interval = BALIN_KEYS_DEBOUNCE_INTERVAL, > + .gpio = BALIN_GPIO_BTN_WPS, > + .active_low = 0, > + }, > +}; > + > + > +static void __init balin_setup(void) > +{ > + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); > + static u8 mac[6]; > + > + ath79_register_m25p80(NULL); > + > + ath79_register_leds_gpio(-1, ARRAY_SIZE(balin_leds_gpio), > + balin_leds_gpio); > + > + ath79_register_gpio_keys_polled(-1, BALIN_KEYS_POLL_INTERVAL, > + ARRAY_SIZE(balin_gpio_keys), > + balin_gpio_keys); > + > + ath79_register_usb(); > + > + > + ath79_register_wmac(art + BALIN_CALDATA_OFFSET, > + art + BALIN_WMAC_MAC_OFFSET); > + > + ath79_register_pci(); > + > + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | > + AR934X_ETH_CFG_SW_ONLY_MODE); > + > + ath79_register_mdio(1, 0x0); > + > + /* GMAC1 is connected to the internal switch */ > + memcpy(mac, art + BALIN_WMAC_MAC_OFFSET, sizeof(mac)); > + mac[3] |= 0x40; > + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); > + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; > + ath79_eth1_data.speed = SPEED_1000; > + ath79_eth1_data.duplex = DUPLEX_FULL; > + > + ath79_register_eth(1); > +} > + > +MIPS_MACHINE(ATH79_MACH_EW_BALIN, "EW-BALIN", "EmbWir-Balin", > + balin_setup); > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h > index 0f536f0ec5..ca684b4209 100644 > --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h > +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h > @@ -106,6 +106,7 @@ enum ath79_mach_type { > ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ > ATH79_MACH_ESR1750, /* EnGenius ESR1750 */ > ATH79_MACH_ESR900, /* EnGenius ESR900 */ > + ATH79_MACH_EW_BALIN, /* embedded wireless Balin Platform */ > ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ > ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ > ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ > diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk > index 6829f113a7..9e9f747803 100644 > --- a/target/linux/ar71xx/image/generic.mk > +++ b/target/linux/ar71xx/image/generic.mk > @@ -229,6 +229,15 @@ define Device/dragino2 > endef > TARGET_DEVICES += dragino2 > > +define Device/ew-balin > + DEVICE_TITLE := Embedded Wireless Balin Platform > + DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea > + BOARDNAME = EW-BALIN > + IMAGE_SIZE = 16000k > + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro > +endef > +TARGET_DEVICES += ew-balin > + > define Device/ew-dorin > DEVICE_TITLE := Embedded Wireless Dorin Platform > DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea > diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default > index a77813d23d..ffa07bd3dd 100644 > --- a/target/linux/ar71xx/mikrotik/config-default > +++ b/target/linux/ar71xx/mikrotik/config-default > @@ -73,6 +73,7 @@ > # CONFIG_ATH79_MACH_EPG5000 is not set > # CONFIG_ATH79_MACH_ESR1750 is not set > # CONFIG_ATH79_MACH_ESR900 is not set > +# CONFIG_ATH79_MACH_EW_BALIN is not set > # CONFIG_ATH79_MACH_EW_DORIN is not set > # CONFIG_ATH79_MACH_F9K1115V2 is not set > # CONFIG_ATH79_MACH_FRITZ300E is not set > diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default > index d85a21d91a..18d56c1f80 100644 > --- a/target/linux/ar71xx/nand/config-default > +++ b/target/linux/ar71xx/nand/config-default > @@ -74,6 +74,7 @@ CONFIG_ATH79_MACH_DOMYWIFI_DW33D=y > # CONFIG_ATH79_MACH_EPG5000 is not set > # CONFIG_ATH79_MACH_ESR1750 is not set > # CONFIG_ATH79_MACH_ESR900 is not set > +# CONFIG_ATH79_MACH_EW_BALIN is not set > # CONFIG_ATH79_MACH_EW_DORIN is not set > # CONFIG_ATH79_MACH_F9K1115V2 is not set > # CONFIG_ATH79_MACH_FRITZ300E is not set
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index fb61792bf4..4919e7c983 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -368,6 +368,12 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" ;; + ew-balin) + ucidef_set_interface_raw "usb2" "usb0" "static" + ucidef_set_interface_raw "usb3" "usb0" "static" + ucidef_add_switch "switch0" \ + "0@eth0" "5:lan:4" "4:lan:5" "3:wan" + ;; ew-dorin) ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:wan" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 6cbb3576d8..ca73d5f62b 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -193,6 +193,9 @@ get_status_led() { el-mini) status_led="easylink:green:system" ;; + ew-balin) + status_led="balin:green:status" + ;; ew-dorin|\ ew-dorin-router) status_led="dorin:green:status" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration index 29fdde40a0..898082f552 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration @@ -53,6 +53,7 @@ dir-615-e1|\ dir-615-e4|\ dir-825-c1|\ ebr-2310-c1|\ +ew-balin|\ ew-dorin|\ ew-dorin-router|\ ja76pf|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index b5440230a5..162742a94c 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -640,6 +640,9 @@ ar71xx_board_detect() { *"EL-MINI") name="el-mini" ;; + *EmbWir-Balin) + name="ew-balin" + ;; *"EmbWir-Dorin") name="ew-dorin" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index ecf6820a2b..9dceadc563 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -237,6 +237,7 @@ platform_check_image() { epg5000|\ esr1750|\ esr900|\ + ew-balin|\ ew-dorin|\ ew-dorin-router|\ gl-ar150|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 5a8004a03e..36b266f21c 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -109,6 +109,7 @@ CONFIG_ATH79_MACH_ENS202EXT=y CONFIG_ATH79_MACH_EPG5000=y CONFIG_ATH79_MACH_ESR1750=y CONFIG_ATH79_MACH_ESR900=y +CONFIG_ATH79_MACH_EW_BALIN=y CONFIG_ATH79_MACH_EW_DORIN=y CONFIG_ATH79_MACH_F9K1115V2=y CONFIG_ATH79_MACH_FRITZ300E=y diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index 4334d25b80..d51fe5f797 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -107,6 +107,7 @@ CONFIG_ATH79_MACH_ENS202EXT=y CONFIG_ATH79_MACH_EPG5000=y CONFIG_ATH79_MACH_ESR1750=y CONFIG_ATH79_MACH_ESR900=y +CONFIG_ATH79_MACH_EW_BALIN=y CONFIG_ATH79_MACH_EW_DORIN=y CONFIG_ATH79_MACH_F9K1115V2=y CONFIG_ATH79_MACH_FRITZ300E=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 1198fcb74b..a94c5a3a2e 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -702,6 +702,17 @@ config ATH79_MACH_ESR900 select ATH79_DEV_WMAC select ATH79_NVRAM +config ATH79_MACH_EW_BALIN + bool "embedded wireless Balin Platform support" + select SOC_AR934X + select ATH79_DEV_M25P80 + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_WMAC + select ATH79_DEV_ETH + select ATH79_DEV_USB + select ATH79_DEV_AP9X_PCI if PCI + config ATH79_MACH_EW_DORIN bool "embedded wireless Dorin Platform support" select SOC_AR933X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 455af762e3..bde1b75308 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -115,6 +115,7 @@ obj-$(CONFIG_ATH79_MACH_ENS202EXT) += mach-ens202ext.o obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o +obj-$(CONFIG_ATH79_MACH_EW_BALIN) += mach-ew-balin.o obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c new file mode 100644 index 0000000000..7d7f38c1d2 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c @@ -0,0 +1,112 @@ +/* + * EW Balin board support + * (based on Atheros DB120 reference board support) + * + * Copyright (c) 2011 Qualcomm Atheros + * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2017 Embedded Wireless GmbH www.80211.de + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +#define BALIN_GPIO_LED_STATUS 14 + +#define BALIN_GPIO_BTN_WPS 18 + +#define BALIN_KEYS_POLL_INTERVAL 20 /* msecs */ +#define BALIN_KEYS_DEBOUNCE_INTERVAL (3 * BALIN_KEYS_POLL_INTERVAL) + +#define BALIN_CALDATA_OFFSET 0x1000 +#define BALIN_WMAC_MAC_OFFSET (BALIN_CALDATA_OFFSET + 0x02) + +static struct gpio_led balin_leds_gpio[] __initdata = { + { + .name = "balin:green:status", + .gpio = BALIN_GPIO_LED_STATUS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button balin_gpio_keys[] __initdata = { + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = BALIN_KEYS_DEBOUNCE_INTERVAL, + .gpio = BALIN_GPIO_BTN_WPS, + .active_low = 0, + }, +}; + + +static void __init balin_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + static u8 mac[6]; + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(balin_leds_gpio), + balin_leds_gpio); + + ath79_register_gpio_keys_polled(-1, BALIN_KEYS_POLL_INTERVAL, + ARRAY_SIZE(balin_gpio_keys), + balin_gpio_keys); + + ath79_register_usb(); + + + ath79_register_wmac(art + BALIN_CALDATA_OFFSET, + art + BALIN_WMAC_MAC_OFFSET); + + ath79_register_pci(); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | + AR934X_ETH_CFG_SW_ONLY_MODE); + + ath79_register_mdio(1, 0x0); + + /* GMAC1 is connected to the internal switch */ + memcpy(mac, art + BALIN_WMAC_MAC_OFFSET, sizeof(mac)); + mac[3] |= 0x40; + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_EW_BALIN, "EW-BALIN", "EmbWir-Balin", + balin_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 0f536f0ec5..ca684b4209 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -106,6 +106,7 @@ enum ath79_mach_type { ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */ ATH79_MACH_ESR900, /* EnGenius ESR900 */ + ATH79_MACH_EW_BALIN, /* embedded wireless Balin Platform */ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 6829f113a7..9e9f747803 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -229,6 +229,15 @@ define Device/dragino2 endef TARGET_DEVICES += dragino2 +define Device/ew-balin + DEVICE_TITLE := Embedded Wireless Balin Platform + DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea + BOARDNAME = EW-BALIN + IMAGE_SIZE = 16000k + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro +endef +TARGET_DEVICES += ew-balin + define Device/ew-dorin DEVICE_TITLE := Embedded Wireless Dorin Platform DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index a77813d23d..ffa07bd3dd 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -73,6 +73,7 @@ # CONFIG_ATH79_MACH_EPG5000 is not set # CONFIG_ATH79_MACH_ESR1750 is not set # CONFIG_ATH79_MACH_ESR900 is not set +# CONFIG_ATH79_MACH_EW_BALIN is not set # CONFIG_ATH79_MACH_EW_DORIN is not set # CONFIG_ATH79_MACH_F9K1115V2 is not set # CONFIG_ATH79_MACH_FRITZ300E is not set diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index d85a21d91a..18d56c1f80 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -74,6 +74,7 @@ CONFIG_ATH79_MACH_DOMYWIFI_DW33D=y # CONFIG_ATH79_MACH_EPG5000 is not set # CONFIG_ATH79_MACH_ESR1750 is not set # CONFIG_ATH79_MACH_ESR900 is not set +# CONFIG_ATH79_MACH_EW_BALIN is not set # CONFIG_ATH79_MACH_EW_DORIN is not set # CONFIG_ATH79_MACH_F9K1115V2 is not set # CONFIG_ATH79_MACH_FRITZ300E is not set
Add the Embedded Wireless "Balin" platform, based on AR9344: http://www.embeddedwireless.de/uploads/Balin_data_2016_10.pdf The module comes already with the current vanilla OpenWRT firmware, so no need to install "factory"-image, or any other stuff:-) Signed-off-by: Catrinel Catrinescu <cc@80211.de> --- .../linux/ar71xx/base-files/etc/board.d/02_network | 6 ++ target/linux/ar71xx/base-files/etc/diag.sh | 3 + .../etc/uci-defaults/03_network-switchX-migration | 1 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + target/linux/ar71xx/config-4.4 | 1 + target/linux/ar71xx/config-4.9 | 1 + .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 ++ target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 + .../ar71xx/files/arch/mips/ath79/mach-ew-balin.c | 112 +++++++++++++++++++++ .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 + target/linux/ar71xx/image/generic.mk | 9 ++ target/linux/ar71xx/mikrotik/config-default | 1 + target/linux/ar71xx/nand/config-default | 1 + 14 files changed, 152 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c