Message ID | 20171216201450.5770-1-woods.technical@gmail.com |
---|---|
Headers | show |
Series | ARM: omap3: evm: Add OF_CONTROL support | expand |
On Sat, Dec 16, 2017 at 02:14:47PM -0600, Derald D. Woods wrote: > This series adds OF_CONTROL support for TMDSEVM{3530,3730} and > additionally updates ethaddr setup with smc911x initialization. > > Devicetree files are taken from Linux v4.15-rc3. Note that this is the > first addition of OMAP34XX devicetree files. > > Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb] > > --- 8< ----------------------------------------------------------------- > U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10) > Trying to boot from MMC1 > reading u-boot.img > reading u-boot.img > > > U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600) > > OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz > Model: TI OMAP35XX EVM (TMDSEVM3530) > OMAP3 EVM board + LPDDR/NAND > I2C: ready > DRAM: 256 MiB > NAND: 256 MiB > MMC: OMAP SD/MMC: 0 > Read back SMSC id 0x92200000 > OMAP die ID: 265a002400000000040365fa1801b01f > Net: smc911x-0 > starting USB... > USB0: USB EHCI 1.00 > scanning bus 0 for devices... 1 USB Device(s) found > Hit any key to stop autoboot: 0 > OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr > serial@4806a000 > serial@4806a000 > serial@4806a000 > --- 8< ----------------------------------------------------------------- > > > Derald D. Woods (3): > ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730} > ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730} > ARM: omap3: evm: Refactor 'board_eth_init' > > arch/arm/dts/Makefile | 4 + > arch/arm/dts/omap-gpmc-smsc911x.dtsi | 55 ++++++ > arch/arm/dts/omap3-evm-37xx-u-boot.dtsi | 29 ++++ > arch/arm/dts/omap3-evm-37xx.dts | 110 ++++++++++++ > arch/arm/dts/omap3-evm-common.dtsi | 195 +++++++++++++++++++++ > arch/arm/dts/omap3-evm-processor-common.dtsi | 216 ++++++++++++++++++++++++ > arch/arm/dts/omap3-evm-u-boot.dtsi | 29 ++++ > arch/arm/dts/omap3-evm.dts | 89 ++++++++++ > arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 73 ++++++++ > arch/arm/dts/omap34xx.dtsi | 84 +++++++++ > arch/arm/mach-omap2/omap3/Kconfig | 4 + > board/ti/evm/evm.c | 24 +-- > configs/omap3_evm_defconfig | 9 +- > include/configs/omap3_evm.h | 2 - > 14 files changed, 896 insertions(+), 27 deletions(-) > create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi > create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi > create mode 100644 arch/arm/dts/omap3-evm-37xx.dts > create mode 100644 arch/arm/dts/omap3-evm-common.dtsi > create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi > create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi > create mode 100644 arch/arm/dts/omap3-evm.dts > create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi > create mode 100644 arch/arm/dts/omap34xx.dtsi > > -- > 2.15.1 > Ping. If there is any concern, please let me know and I will make corrections. I plan to also update beagleboard and overo to use their respective devicetree files. I would like to have these three OMAP34XX boards, that I possess, to be near the same level of support. It will help me to continue testing OMAP34XX stuff in general. Derald
On Mon, Dec 25, 2017 at 09:34:03PM -0600, Derald D. Woods wrote: > On Sat, Dec 16, 2017 at 02:14:47PM -0600, Derald D. Woods wrote: > > This series adds OF_CONTROL support for TMDSEVM{3530,3730} and > > additionally updates ethaddr setup with smc911x initialization. > > > > Devicetree files are taken from Linux v4.15-rc3. Note that this is the > > first addition of OMAP34XX devicetree files. > > > > Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb] > > > > --- 8< ----------------------------------------------------------------- > > U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10) > > Trying to boot from MMC1 > > reading u-boot.img > > reading u-boot.img > > > > > > U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600) > > > > OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz > > Model: TI OMAP35XX EVM (TMDSEVM3530) > > OMAP3 EVM board + LPDDR/NAND > > I2C: ready > > DRAM: 256 MiB > > NAND: 256 MiB > > MMC: OMAP SD/MMC: 0 > > Read back SMSC id 0x92200000 > > OMAP die ID: 265a002400000000040365fa1801b01f > > Net: smc911x-0 > > starting USB... > > USB0: USB EHCI 1.00 > > scanning bus 0 for devices... 1 USB Device(s) found > > Hit any key to stop autoboot: 0 > > OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr > > serial@4806a000 > > serial@4806a000 > > serial@4806a000 > > --- 8< ----------------------------------------------------------------- > > > > > > Derald D. Woods (3): > > ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730} > > ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730} > > ARM: omap3: evm: Refactor 'board_eth_init' > > > > arch/arm/dts/Makefile | 4 + > > arch/arm/dts/omap-gpmc-smsc911x.dtsi | 55 ++++++ > > arch/arm/dts/omap3-evm-37xx-u-boot.dtsi | 29 ++++ > > arch/arm/dts/omap3-evm-37xx.dts | 110 ++++++++++++ > > arch/arm/dts/omap3-evm-common.dtsi | 195 +++++++++++++++++++++ > > arch/arm/dts/omap3-evm-processor-common.dtsi | 216 ++++++++++++++++++++++++ > > arch/arm/dts/omap3-evm-u-boot.dtsi | 29 ++++ > > arch/arm/dts/omap3-evm.dts | 89 ++++++++++ > > arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 73 ++++++++ > > arch/arm/dts/omap34xx.dtsi | 84 +++++++++ > > arch/arm/mach-omap2/omap3/Kconfig | 4 + > > board/ti/evm/evm.c | 24 +-- > > configs/omap3_evm_defconfig | 9 +- > > include/configs/omap3_evm.h | 2 - > > 14 files changed, 896 insertions(+), 27 deletions(-) > > create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi > > create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi > > create mode 100644 arch/arm/dts/omap3-evm-37xx.dts > > create mode 100644 arch/arm/dts/omap3-evm-common.dtsi > > create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi > > create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi > > create mode 100644 arch/arm/dts/omap3-evm.dts > > create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi > > create mode 100644 arch/arm/dts/omap34xx.dtsi > > > > -- > > 2.15.1 > > > > Ping. If there is any concern, please let me know and I will make > corrections. I plan to also update beagleboard and overo to use their > respective devicetree files. I would like to have these three OMAP34XX > boards, that I possess, to be near the same level of support. It will > help me to continue testing OMAP34XX stuff in general. It's localized enough that it's your call, do you want it in for v2018.01 or .03? Thanks!
On Tue, Dec 26, 2017 at 11:14:55AM -0500, Tom Rini wrote: > On Mon, Dec 25, 2017 at 09:34:03PM -0600, Derald D. Woods wrote: > > On Sat, Dec 16, 2017 at 02:14:47PM -0600, Derald D. Woods wrote: > > > This series adds OF_CONTROL support for TMDSEVM{3530,3730} and > > > additionally updates ethaddr setup with smc911x initialization. > > > > > > Devicetree files are taken from Linux v4.15-rc3. Note that this is the > > > first addition of OMAP34XX devicetree files. > > > > > > Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb] > > > > > > --- 8< ----------------------------------------------------------------- > > > U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10) > > > Trying to boot from MMC1 > > > reading u-boot.img > > > reading u-boot.img > > > > > > > > > U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600) > > > > > > OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz > > > Model: TI OMAP35XX EVM (TMDSEVM3530) > > > OMAP3 EVM board + LPDDR/NAND > > > I2C: ready > > > DRAM: 256 MiB > > > NAND: 256 MiB > > > MMC: OMAP SD/MMC: 0 > > > Read back SMSC id 0x92200000 > > > OMAP die ID: 265a002400000000040365fa1801b01f > > > Net: smc911x-0 > > > starting USB... > > > USB0: USB EHCI 1.00 > > > scanning bus 0 for devices... 1 USB Device(s) found > > > Hit any key to stop autoboot: 0 > > > OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr > > > serial@4806a000 > > > serial@4806a000 > > > serial@4806a000 > > > --- 8< ----------------------------------------------------------------- > > > > > > > > > Derald D. Woods (3): > > > ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730} > > > ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730} > > > ARM: omap3: evm: Refactor 'board_eth_init' > > > > > > arch/arm/dts/Makefile | 4 + > > > arch/arm/dts/omap-gpmc-smsc911x.dtsi | 55 ++++++ > > > arch/arm/dts/omap3-evm-37xx-u-boot.dtsi | 29 ++++ > > > arch/arm/dts/omap3-evm-37xx.dts | 110 ++++++++++++ > > > arch/arm/dts/omap3-evm-common.dtsi | 195 +++++++++++++++++++++ > > > arch/arm/dts/omap3-evm-processor-common.dtsi | 216 ++++++++++++++++++++++++ > > > arch/arm/dts/omap3-evm-u-boot.dtsi | 29 ++++ > > > arch/arm/dts/omap3-evm.dts | 89 ++++++++++ > > > arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 73 ++++++++ > > > arch/arm/dts/omap34xx.dtsi | 84 +++++++++ > > > arch/arm/mach-omap2/omap3/Kconfig | 4 + > > > board/ti/evm/evm.c | 24 +-- > > > configs/omap3_evm_defconfig | 9 +- > > > include/configs/omap3_evm.h | 2 - > > > 14 files changed, 896 insertions(+), 27 deletions(-) > > > create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi > > > create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi > > > create mode 100644 arch/arm/dts/omap3-evm-37xx.dts > > > create mode 100644 arch/arm/dts/omap3-evm-common.dtsi > > > create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi > > > create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi > > > create mode 100644 arch/arm/dts/omap3-evm.dts > > > create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi > > > create mode 100644 arch/arm/dts/omap34xx.dtsi > > > > > > -- > > > 2.15.1 > > > > > > > Ping. If there is any concern, please let me know and I will make > > corrections. I plan to also update beagleboard and overo to use their > > respective devicetree files. I would like to have these three OMAP34XX > > boards, that I possess, to be near the same level of support. It will > > help me to continue testing OMAP34XX stuff in general. > > It's localized enough that it's your call, do you want it in for > v2018.01 or .03? Thanks! > I would like it to land in v2018.01 if possible. Derald