Message ID | 20170904163014.955-2-clabbe.montjoie@gmail.com |
---|---|
State | Accepted, archived |
Delegated to: | David Miller |
Headers | show |
Series | net: mdio-mux: add mdio_mux parameter to mdio_mux_init() | expand |
On 09/04/2017 09:30 AM, Corentin Labbe wrote: > mdio_mux_init() use the parameter dev for two distinct thing: > 1) Have a device for all devm_ functions > 2) Get device_node from it > > Since it is two distinct purpose, this patch add a parameter mdio_mux > that is linked to task 2. > > This will also permit to register an of_node mdio-mux that lacks a direct > owning device. > For example a mdio-mux which is a subnode of a real device. This looks fine, I was going to suggest introducing a wrapper around mdio_mux_init() which does something along the lines below, but considering the number of users of mdio_mux_init() within the kernel tree, it's reasonably easy to audit those, therefore: Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> diff --git a/include/linux/mdio-mux.h b/include/linux/mdio-mux.h index 61f5b21b31c7..0316186c91b5 100644 --- a/include/linux/mdio-mux.h +++ b/include/linux/mdio-mux.h @@ -12,11 +12,19 @@ #include <linux/device.h> #include <linux/phy.h> -int mdio_mux_init(struct device *dev, - int (*switch_fn) (int cur, int desired, void *data), - void **mux_handle, - void *data, - struct mii_bus *mux_bus); +int mdio_mux_init_dn(struct device *dev, struct device_node *mux_node, + int (*switch_fn)(int cur, int desired, void *data), + void **mux_handle, void *data, + struct mii_bus *mux_bus); + +static inline int mdio_mux_init(struct device *dev, + int (*switch_fn)(int cur, int desired, void *data), + void **mux_handle, void *data, + struct mii_bus *mux_bus) +{ + return mdio_mux_init_dn(dev, dev->of_node, switch_fn, + mux_handle, data, mux_bus); +} > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> > --- > drivers/net/phy/mdio-mux-bcm-iproc.c | 2 +- > drivers/net/phy/mdio-mux-gpio.c | 2 +- > drivers/net/phy/mdio-mux-mmioreg.c | 3 ++- > drivers/net/phy/mdio-mux.c | 7 ++++--- > include/linux/mdio-mux.h | 9 +++++++++ > 5 files changed, 17 insertions(+), 6 deletions(-) > > diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c > index 0a5f62e0efcc..0831b7142df7 100644 > --- a/drivers/net/phy/mdio-mux-bcm-iproc.c > +++ b/drivers/net/phy/mdio-mux-bcm-iproc.c > @@ -199,7 +199,7 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev) > > platform_set_drvdata(pdev, md); > > - rc = mdio_mux_init(md->dev, mdio_mux_iproc_switch_fn, > + rc = mdio_mux_init(md->dev, md->dev->of_node, mdio_mux_iproc_switch_fn, > &md->mux_handle, md, md->mii_bus); > if (rc) { > dev_info(md->dev, "mdiomux initialization failed\n"); > diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c > index 919949960a10..082ffef0dec4 100644 > --- a/drivers/net/phy/mdio-mux-gpio.c > +++ b/drivers/net/phy/mdio-mux-gpio.c > @@ -54,7 +54,7 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev) > if (IS_ERR(s->gpios)) > return PTR_ERR(s->gpios); > > - r = mdio_mux_init(&pdev->dev, > + r = mdio_mux_init(&pdev->dev, pdev->dev.of_node, > mdio_mux_gpio_switch_fn, &s->mux_handle, s, NULL); > > if (r != 0) { > diff --git a/drivers/net/phy/mdio-mux-mmioreg.c b/drivers/net/phy/mdio-mux-mmioreg.c > index c3825c7da038..2573ab012f16 100644 > --- a/drivers/net/phy/mdio-mux-mmioreg.c > +++ b/drivers/net/phy/mdio-mux-mmioreg.c > @@ -159,7 +159,8 @@ static int mdio_mux_mmioreg_probe(struct platform_device *pdev) > } > } > > - ret = mdio_mux_init(&pdev->dev, mdio_mux_mmioreg_switch_fn, > + ret = mdio_mux_init(&pdev->dev, pdev->dev.of_node, > + mdio_mux_mmioreg_switch_fn, > &s->mux_handle, s, NULL); > if (ret) { > dev_err(&pdev->dev, "failed to register mdio-mux bus %pOF\n", > diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c > index 6f75e9f27fed..0a86f1e4c02f 100644 > --- a/drivers/net/phy/mdio-mux.c > +++ b/drivers/net/phy/mdio-mux.c > @@ -86,6 +86,7 @@ static int mdio_mux_write(struct mii_bus *bus, int phy_id, > static int parent_count; > > int mdio_mux_init(struct device *dev, > + struct device_node *mux_node, > int (*switch_fn)(int cur, int desired, void *data), > void **mux_handle, > void *data, > @@ -98,11 +99,11 @@ int mdio_mux_init(struct device *dev, > struct mdio_mux_parent_bus *pb; > struct mdio_mux_child_bus *cb; > > - if (!dev->of_node) > + if (!mux_node) > return -ENODEV; > > if (!mux_bus) { > - parent_bus_node = of_parse_phandle(dev->of_node, > + parent_bus_node = of_parse_phandle(mux_node, > "mdio-parent-bus", 0); > > if (!parent_bus_node) > @@ -132,7 +133,7 @@ int mdio_mux_init(struct device *dev, > pb->mii_bus = parent_bus; > > ret_val = -ENODEV; > - for_each_available_child_of_node(dev->of_node, child_bus_node) { > + for_each_available_child_of_node(mux_node, child_bus_node) { > int v; > > r = of_property_read_u32(child_bus_node, "reg", &v); > diff --git a/include/linux/mdio-mux.h b/include/linux/mdio-mux.h > index 61f5b21b31c7..a5d58f221939 100644 > --- a/include/linux/mdio-mux.h > +++ b/include/linux/mdio-mux.h > @@ -12,7 +12,16 @@ > #include <linux/device.h> > #include <linux/phy.h> > > +/* mdio_mux_init() - Initialize a MDIO mux > + * @dev The device owning the MDIO mux > + * @mux_node The device node of the MDIO mux > + * @switch_fn The function called for switching target MDIO child > + * mux_handle A pointer to a (void *) used internaly by mdio-mux > + * @data Private data used by switch_fn() > + * @mux_bus An optional parent bus (Other case are to use parent_bus property) > + */ > int mdio_mux_init(struct device *dev, > + struct device_node *mux_node, > int (*switch_fn) (int cur, int desired, void *data), > void **mux_handle, > void *data, >
On 09/04/2017 09:30 AM, Corentin Labbe wrote: > mdio_mux_init() use the parameter dev for two distinct thing: > 1) Have a device for all devm_ functions > 2) Get device_node from it > > Since it is two distinct purpose, this patch add a parameter mdio_mux > that is linked to task 2. > > This will also permit to register an of_node mdio-mux that lacks a direct > owning device. > For example a mdio-mux which is a subnode of a real device. This looks fine, I was going to suggest introducing a wrapper around mdio_mux_init() which does something along the lines below, but considering the number of users of mdio_mux_init() within the kernel tree, it's reasonably easy to audit those, therefore: Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> diff --git a/include/linux/mdio-mux.h b/include/linux/mdio-mux.h index 61f5b21b31c7..0316186c91b5 100644 --- a/include/linux/mdio-mux.h +++ b/include/linux/mdio-mux.h @@ -12,11 +12,19 @@ #include <linux/device.h> #include <linux/phy.h> -int mdio_mux_init(struct device *dev, - int (*switch_fn) (int cur, int desired, void *data), - void **mux_handle, - void *data, - struct mii_bus *mux_bus); +int mdio_mux_init_dn(struct device *dev, struct device_node *mux_node, + int (*switch_fn)(int cur, int desired, void *data), + void **mux_handle, void *data, + struct mii_bus *mux_bus); + +static inline int mdio_mux_init(struct device *dev, + int (*switch_fn)(int cur, int desired, void *data), + void **mux_handle, void *data, + struct mii_bus *mux_bus) +{ + return mdio_mux_init_dn(dev, dev->of_node, switch_fn, + mux_handle, data, mux_bus); +} > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> > --- > drivers/net/phy/mdio-mux-bcm-iproc.c | 2 +- > drivers/net/phy/mdio-mux-gpio.c | 2 +- > drivers/net/phy/mdio-mux-mmioreg.c | 3 ++- > drivers/net/phy/mdio-mux.c | 7 ++++--- > include/linux/mdio-mux.h | 9 +++++++++ > 5 files changed, 17 insertions(+), 6 deletions(-) > > diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c > index 0a5f62e0efcc..0831b7142df7 100644 > --- a/drivers/net/phy/mdio-mux-bcm-iproc.c > +++ b/drivers/net/phy/mdio-mux-bcm-iproc.c > @@ -199,7 +199,7 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev) > > platform_set_drvdata(pdev, md); > > - rc = mdio_mux_init(md->dev, mdio_mux_iproc_switch_fn, > + rc = mdio_mux_init(md->dev, md->dev->of_node, mdio_mux_iproc_switch_fn, > &md->mux_handle, md, md->mii_bus); > if (rc) { > dev_info(md->dev, "mdiomux initialization failed\n"); > diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c > index 919949960a10..082ffef0dec4 100644 > --- a/drivers/net/phy/mdio-mux-gpio.c > +++ b/drivers/net/phy/mdio-mux-gpio.c > @@ -54,7 +54,7 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev) > if (IS_ERR(s->gpios)) > return PTR_ERR(s->gpios); > > - r = mdio_mux_init(&pdev->dev, > + r = mdio_mux_init(&pdev->dev, pdev->dev.of_node, > mdio_mux_gpio_switch_fn, &s->mux_handle, s, NULL); > > if (r != 0) { > diff --git a/drivers/net/phy/mdio-mux-mmioreg.c b/drivers/net/phy/mdio-mux-mmioreg.c > index c3825c7da038..2573ab012f16 100644 > --- a/drivers/net/phy/mdio-mux-mmioreg.c > +++ b/drivers/net/phy/mdio-mux-mmioreg.c > @@ -159,7 +159,8 @@ static int mdio_mux_mmioreg_probe(struct platform_device *pdev) > } > } > > - ret = mdio_mux_init(&pdev->dev, mdio_mux_mmioreg_switch_fn, > + ret = mdio_mux_init(&pdev->dev, pdev->dev.of_node, > + mdio_mux_mmioreg_switch_fn, > &s->mux_handle, s, NULL); > if (ret) { > dev_err(&pdev->dev, "failed to register mdio-mux bus %pOF\n", > diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c > index 6f75e9f27fed..0a86f1e4c02f 100644 > --- a/drivers/net/phy/mdio-mux.c > +++ b/drivers/net/phy/mdio-mux.c > @@ -86,6 +86,7 @@ static int mdio_mux_write(struct mii_bus *bus, int phy_id, > static int parent_count; > > int mdio_mux_init(struct device *dev, > + struct device_node *mux_node, > int (*switch_fn)(int cur, int desired, void *data), > void **mux_handle, > void *data, > @@ -98,11 +99,11 @@ int mdio_mux_init(struct device *dev, > struct mdio_mux_parent_bus *pb; > struct mdio_mux_child_bus *cb; > > - if (!dev->of_node) > + if (!mux_node) > return -ENODEV; > > if (!mux_bus) { > - parent_bus_node = of_parse_phandle(dev->of_node, > + parent_bus_node = of_parse_phandle(mux_node, > "mdio-parent-bus", 0); > > if (!parent_bus_node) > @@ -132,7 +133,7 @@ int mdio_mux_init(struct device *dev, > pb->mii_bus = parent_bus; > > ret_val = -ENODEV; > - for_each_available_child_of_node(dev->of_node, child_bus_node) { > + for_each_available_child_of_node(mux_node, child_bus_node) { > int v; > > r = of_property_read_u32(child_bus_node, "reg", &v); > diff --git a/include/linux/mdio-mux.h b/include/linux/mdio-mux.h > index 61f5b21b31c7..a5d58f221939 100644 > --- a/include/linux/mdio-mux.h > +++ b/include/linux/mdio-mux.h > @@ -12,7 +12,16 @@ > #include <linux/device.h> > #include <linux/phy.h> > > +/* mdio_mux_init() - Initialize a MDIO mux > + * @dev The device owning the MDIO mux > + * @mux_node The device node of the MDIO mux > + * @switch_fn The function called for switching target MDIO child > + * mux_handle A pointer to a (void *) used internaly by mdio-mux > + * @data Private data used by switch_fn() > + * @mux_bus An optional parent bus (Other case are to use parent_bus property) > + */ > int mdio_mux_init(struct device *dev, > + struct device_node *mux_node, > int (*switch_fn) (int cur, int desired, void *data), > void **mux_handle, > void *data, >
diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c index 0a5f62e0efcc..0831b7142df7 100644 --- a/drivers/net/phy/mdio-mux-bcm-iproc.c +++ b/drivers/net/phy/mdio-mux-bcm-iproc.c @@ -199,7 +199,7 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, md); - rc = mdio_mux_init(md->dev, mdio_mux_iproc_switch_fn, + rc = mdio_mux_init(md->dev, md->dev->of_node, mdio_mux_iproc_switch_fn, &md->mux_handle, md, md->mii_bus); if (rc) { dev_info(md->dev, "mdiomux initialization failed\n"); diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c index 919949960a10..082ffef0dec4 100644 --- a/drivers/net/phy/mdio-mux-gpio.c +++ b/drivers/net/phy/mdio-mux-gpio.c @@ -54,7 +54,7 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev) if (IS_ERR(s->gpios)) return PTR_ERR(s->gpios); - r = mdio_mux_init(&pdev->dev, + r = mdio_mux_init(&pdev->dev, pdev->dev.of_node, mdio_mux_gpio_switch_fn, &s->mux_handle, s, NULL); if (r != 0) { diff --git a/drivers/net/phy/mdio-mux-mmioreg.c b/drivers/net/phy/mdio-mux-mmioreg.c index c3825c7da038..2573ab012f16 100644 --- a/drivers/net/phy/mdio-mux-mmioreg.c +++ b/drivers/net/phy/mdio-mux-mmioreg.c @@ -159,7 +159,8 @@ static int mdio_mux_mmioreg_probe(struct platform_device *pdev) } } - ret = mdio_mux_init(&pdev->dev, mdio_mux_mmioreg_switch_fn, + ret = mdio_mux_init(&pdev->dev, pdev->dev.of_node, + mdio_mux_mmioreg_switch_fn, &s->mux_handle, s, NULL); if (ret) { dev_err(&pdev->dev, "failed to register mdio-mux bus %pOF\n", diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c index 6f75e9f27fed..0a86f1e4c02f 100644 --- a/drivers/net/phy/mdio-mux.c +++ b/drivers/net/phy/mdio-mux.c @@ -86,6 +86,7 @@ static int mdio_mux_write(struct mii_bus *bus, int phy_id, static int parent_count; int mdio_mux_init(struct device *dev, + struct device_node *mux_node, int (*switch_fn)(int cur, int desired, void *data), void **mux_handle, void *data, @@ -98,11 +99,11 @@ int mdio_mux_init(struct device *dev, struct mdio_mux_parent_bus *pb; struct mdio_mux_child_bus *cb; - if (!dev->of_node) + if (!mux_node) return -ENODEV; if (!mux_bus) { - parent_bus_node = of_parse_phandle(dev->of_node, + parent_bus_node = of_parse_phandle(mux_node, "mdio-parent-bus", 0); if (!parent_bus_node) @@ -132,7 +133,7 @@ int mdio_mux_init(struct device *dev, pb->mii_bus = parent_bus; ret_val = -ENODEV; - for_each_available_child_of_node(dev->of_node, child_bus_node) { + for_each_available_child_of_node(mux_node, child_bus_node) { int v; r = of_property_read_u32(child_bus_node, "reg", &v); diff --git a/include/linux/mdio-mux.h b/include/linux/mdio-mux.h index 61f5b21b31c7..a5d58f221939 100644 --- a/include/linux/mdio-mux.h +++ b/include/linux/mdio-mux.h @@ -12,7 +12,16 @@ #include <linux/device.h> #include <linux/phy.h> +/* mdio_mux_init() - Initialize a MDIO mux + * @dev The device owning the MDIO mux + * @mux_node The device node of the MDIO mux + * @switch_fn The function called for switching target MDIO child + * mux_handle A pointer to a (void *) used internaly by mdio-mux + * @data Private data used by switch_fn() + * @mux_bus An optional parent bus (Other case are to use parent_bus property) + */ int mdio_mux_init(struct device *dev, + struct device_node *mux_node, int (*switch_fn) (int cur, int desired, void *data), void **mux_handle, void *data,
mdio_mux_init() use the parameter dev for two distinct thing: 1) Have a device for all devm_ functions 2) Get device_node from it Since it is two distinct purpose, this patch add a parameter mdio_mux that is linked to task 2. This will also permit to register an of_node mdio-mux that lacks a direct owning device. For example a mdio-mux which is a subnode of a real device. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> --- drivers/net/phy/mdio-mux-bcm-iproc.c | 2 +- drivers/net/phy/mdio-mux-gpio.c | 2 +- drivers/net/phy/mdio-mux-mmioreg.c | 3 ++- drivers/net/phy/mdio-mux.c | 7 ++++--- include/linux/mdio-mux.h | 9 +++++++++ 5 files changed, 17 insertions(+), 6 deletions(-)