Message ID | 20170825144208.24503-1-clabbe.montjoie@gmail.com |
---|---|
State | Changes Requested, archived |
Delegated to: | David Miller |
Headers | show |
On Fri, Aug 25, 2017 at 04:42:08PM +0200, Corentin Labbe wrote: > In case of fixed link, there are no mdio node. > This patch add a test for fixed-link for bypassing MDIO node register. The two are not mutually exclusive. E.g. vf610-zii-dev.dtsi/vf610-zii-dev-rev-b.dts. It has a fixed-link on the FEC ethernet controller, and an Ethernet switch on the MDIO bus. If anybody ever wants to use a switch with the stmmac, this will be required. Andrew
On 08/25/2017 09:28 AM, Andrew Lunn wrote: > On Fri, Aug 25, 2017 at 04:42:08PM +0200, Corentin Labbe wrote: >> In case of fixed link, there are no mdio node. >> This patch add a test for fixed-link for bypassing MDIO node register. > > The two are not mutually exclusive. E.g. > vf610-zii-dev.dtsi/vf610-zii-dev-rev-b.dts. It has a fixed-link on > the FEC ethernet controller, and an Ethernet switch on the MDIO bus. > > If anybody ever wants to use a switch with the stmmac, this will be > required. This is already done in the Lamobo R1 DTS file so it would be nice not to break this use case: &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_pins_rgmii_a>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; fixed-link { speed = <1000>; full-duplex; }; mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; #size-cells = <0>; switch: ethernet-switch@1e { compatible = "brcm,bcm53125"; reg = <30>; #address-cells = <1>; #size-cells = <0>; > > Andrew >
On Fri, Aug 25, 2017 at 09:45:23AM -0700, Florian Fainelli wrote: > On 08/25/2017 09:28 AM, Andrew Lunn wrote: > > On Fri, Aug 25, 2017 at 04:42:08PM +0200, Corentin Labbe wrote: > >> In case of fixed link, there are no mdio node. > >> This patch add a test for fixed-link for bypassing MDIO node register. > > > > The two are not mutually exclusive. E.g. > > vf610-zii-dev.dtsi/vf610-zii-dev-rev-b.dts. It has a fixed-link on > > the FEC ethernet controller, and an Ethernet switch on the MDIO bus. > > > > If anybody ever wants to use a switch with the stmmac, this will be > > required. > > This is already done in the Lamobo R1 DTS file so it would be nice not > to break this use case: > > &gmac { > pinctrl-names = "default"; > pinctrl-0 = <&gmac_pins_rgmii_a>; > phy-mode = "rgmii"; > phy-supply = <®_gmac_3v3>; > status = "okay"; > > fixed-link { > speed = <1000>; > full-duplex; > }; > > mdio { > compatible = "snps,dwmac-mdio"; > #address-cells = <1>; > #size-cells = <0>; > > switch: ethernet-switch@1e { > compatible = "brcm,bcm53125"; > reg = <30>; > #address-cells = <1>; > #size-cells = <0>; > > > > > > Andrew > > > Sorry, I have made a bad commit message. This commit only change behaviour for nodes that match need_mdio_ids. The behaviour for snps,dwmac-mdio does not change as it is handled in follow up of the "ifthenelse" I will resent it with correct commit message. Regards
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index a366b3747eeb..e1be5735365b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -332,7 +332,7 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat, mdio = false; } - if (of_match_node(need_mdio_ids, np)) { + if (of_match_node(need_mdio_ids, np) && !of_phy_is_fixed_link(np)) { plat->mdio_node = of_get_child_by_name(np, "mdio"); } else { /**
In case of fixed link, there are no mdio node. This patch add a test for fixed-link for bypassing MDIO node register. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)