Message ID | 1287998573-626-1-git-send-email-Priyanka.Jain@freescale.com |
---|---|
State | Superseded |
Delegated to: | Kumar Gala |
Headers | show |
On Oct 25, 2010, at 4:22 AM, Priyanka Jain wrote: > p1_p2_rdb : SQW/INT pin in RTC can be used for > generating square wave(by default) or as interrupt line. > U-boot is registering this pin for interrupts. > Configuring SQW/INT bit as interrupt line during board initialization > to avoid spurious interrupts generated by square wave. > > Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> > --- > board/freescale/p1_p2_rdb/p1_p2_rdb.c | 1 + > include/configs/P1_P2_RDB.h | 1 + > 2 files changed, 2 insertions(+), 0 deletions(-) applied to 85xx - k
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c index fae31f2..0043184 100644 --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c @@ -156,6 +156,7 @@ int board_early_init_r(void) set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, flash_esel, BOOKE_PAGESZ_16M, 1); + rtc_reset(); return 0; } diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index cff0ed3..ba0c724 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -344,6 +344,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_EEPROM_BUS_NUM 1 #define CONFIG_RTC_DS1337 +#define CONFIG_SYS_RTC_DS1337_NOOSC #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* * General PCI
p1_p2_rdb : SQW/INT pin in RTC can be used for generating square wave(by default) or as interrupt line. U-boot is registering this pin for interrupts. Configuring SQW/INT bit as interrupt line during board initialization to avoid spurious interrupts generated by square wave. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> --- board/freescale/p1_p2_rdb/p1_p2_rdb.c | 1 + include/configs/P1_P2_RDB.h | 1 + 2 files changed, 2 insertions(+), 0 deletions(-)