Message ID | 20170510215806.31659-1-angelo@sysam.it |
---|---|
State | Accepted |
Commit | 0ce452872fc5cadffa4d1dd15377dd66fa457348 |
Delegated to: | Tom Rini |
Headers | show |
Hi Angelo, On 10 May 2017 at 15:58, Angelo Dureghello <angelo@sysam.it> wrote: > Coldfire arch is not happy with timer_init since interrupt handlers > are still not set at that stage, and the boot hangs silently. > > Signed-off-by: Angelo Dureghello <angelo@sysam.it> > --- > common/board_f.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/common/board_f.c b/common/board_f.c > index d9431ee79a..30e588e213 100644 > --- a/common/board_f.c > +++ b/common/board_f.c > @@ -740,7 +740,9 @@ static const init_fnc_t init_sequence_f[] = { > /* get CPU and bus clocks according to the environment variable */ > get_clocks, /* get CPU and bus clocks (etc.) */ > #endif > +#if !defined(CONFIG_M68K) > timer_init, /* initialize timer */ > +#endif > #if defined(CONFIG_BOARD_POSTCLK_INIT) > board_postclk_init, > #endif > -- > 2.11.0 > I'm really hoping we can get rid of all arch-specific things from the init sequence. Is there no way that m68k can init its timer here? Or perhaps it could be a nop function? Regards, Simon
Hi Simon, On 11/05/2017 00:03, Simon Glass wrote: > Hi Angelo, > > On 10 May 2017 at 15:58, Angelo Dureghello <angelo@sysam.it> wrote: >> Coldfire arch is not happy with timer_init since interrupt handlers >> are still not set at that stage, and the boot hangs silently. >> >> Signed-off-by: Angelo Dureghello <angelo@sysam.it> >> --- >> common/board_f.c | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/common/board_f.c b/common/board_f.c >> index d9431ee79a..30e588e213 100644 >> --- a/common/board_f.c >> +++ b/common/board_f.c >> @@ -740,7 +740,9 @@ static const init_fnc_t init_sequence_f[] = { >> /* get CPU and bus clocks according to the environment variable */ >> get_clocks, /* get CPU and bus clocks (etc.) */ >> #endif >> +#if !defined(CONFIG_M68K) >> timer_init, /* initialize timer */ >> +#endif >> #if defined(CONFIG_BOARD_POSTCLK_INIT) >> board_postclk_init, >> #endif >> -- >> 2.11.0 >> > > I'm really hoping we can get rid of all arch-specific things from the > init sequence. > Yes, i have seen you unified that step for all archs, and unfortunately i discovered the issue now only updating u-boot on my mcf5307 based board. > Is there no way that m68k can init its timer here? Or perhaps it could > be a nop function? I checked now all the cpu/xxx/start.S. At that early stage, all the vector handlers are set to _fault thats is just and endless loop. In Coldfire arch, timer_init() is implemented in lib/time.c, as to setup and start the system timer overflow interrupt. It is called later from board_init_r(), line 863, after interrupt_init(). So, no :( unless you don't have some suggestion, i don't see any easy way to keep that timer_init() call enabled in board_init_f(). > > Regards, > Simon > Regards, angelo
On Wed, May 10, 2017 at 11:58:06PM +0200, Angelo Dureghello wrote: > Coldfire arch is not happy with timer_init since interrupt handlers > are still not set at that stage, and the boot hangs silently. > > Signed-off-by: Angelo Dureghello <angelo@sysam.it> Applied to u-boot/master, thanks!
Hi Angelo, On 10 May 2017 at 16:36, Angelo Dureghello <angelo@sysam.it> wrote: > Hi Simon, > > > On 11/05/2017 00:03, Simon Glass wrote: >> >> Hi Angelo, >> >> On 10 May 2017 at 15:58, Angelo Dureghello <angelo@sysam.it> wrote: >>> >>> Coldfire arch is not happy with timer_init since interrupt handlers >>> are still not set at that stage, and the boot hangs silently. >>> >>> Signed-off-by: Angelo Dureghello <angelo@sysam.it> >>> --- >>> common/board_f.c | 2 ++ >>> 1 file changed, 2 insertions(+) >>> >>> diff --git a/common/board_f.c b/common/board_f.c >>> index d9431ee79a..30e588e213 100644 >>> --- a/common/board_f.c >>> +++ b/common/board_f.c >>> @@ -740,7 +740,9 @@ static const init_fnc_t init_sequence_f[] = { >>> /* get CPU and bus clocks according to the environment variable >>> */ >>> get_clocks, /* get CPU and bus clocks (etc.) */ >>> #endif >>> +#if !defined(CONFIG_M68K) >>> timer_init, /* initialize timer */ >>> +#endif >>> #if defined(CONFIG_BOARD_POSTCLK_INIT) >>> board_postclk_init, >>> #endif >>> -- >>> 2.11.0 >>> >> >> I'm really hoping we can get rid of all arch-specific things from the >> init sequence. >> > > Yes, i have seen you unified that step for all archs, and unfortunately i > discovered the issue now only updating u-boot on my mcf5307 based board. > >> Is there no way that m68k can init its timer here? Or perhaps it could >> be a nop function? > > > I checked now all the cpu/xxx/start.S. At that early stage, all the > vector handlers are set to _fault thats is just and endless loop. > > In Coldfire arch, timer_init() is implemented in lib/time.c, as to > setup and start the system timer overflow interrupt. It is called later > from board_init_r(), line 863, after interrupt_init(). > > So, no :( unless you don't have some suggestion, i don't see any easy > way to keep that timer_init() call enabled in board_init_f(). My only ideas are: - user driver model for timer and then call the interrupt init from your driver's probe() method - make timer_init() a nop for you arch Regards, Simon
Hi Simon. On 17/05/2017 03:38, Simon Glass wrote: > Hi Angelo, > > On 10 May 2017 at 16:36, Angelo Dureghello <angelo@sysam.it> wrote: >> Hi Simon, >> >> >> On 11/05/2017 00:03, Simon Glass wrote: >>> >>> Hi Angelo, >>> >>> On 10 May 2017 at 15:58, Angelo Dureghello <angelo@sysam.it> wrote: >>>> >>>> Coldfire arch is not happy with timer_init since interrupt handlers >>>> are still not set at that stage, and the boot hangs silently. >>>> >>>> Signed-off-by: Angelo Dureghello <angelo@sysam.it> >>>> --- >>>> common/board_f.c | 2 ++ >>>> 1 file changed, 2 insertions(+) >>>> >>>> diff --git a/common/board_f.c b/common/board_f.c >>>> index d9431ee79a..30e588e213 100644 >>>> --- a/common/board_f.c >>>> +++ b/common/board_f.c >>>> @@ -740,7 +740,9 @@ static const init_fnc_t init_sequence_f[] = { >>>> /* get CPU and bus clocks according to the environment variable >>>> */ >>>> get_clocks, /* get CPU and bus clocks (etc.) */ >>>> #endif >>>> +#if !defined(CONFIG_M68K) >>>> timer_init, /* initialize timer */ >>>> +#endif >>>> #if defined(CONFIG_BOARD_POSTCLK_INIT) >>>> board_postclk_init, >>>> #endif >>>> -- >>>> 2.11.0 >>>> >>> >>> I'm really hoping we can get rid of all arch-specific things from the >>> init sequence. >>> >> >> Yes, i have seen you unified that step for all archs, and unfortunately i >> discovered the issue now only updating u-boot on my mcf5307 based board. >> >>> Is there no way that m68k can init its timer here? Or perhaps it could >>> be a nop function? >> >> >> I checked now all the cpu/xxx/start.S. At that early stage, all the >> vector handlers are set to _fault thats is just and endless loop. >> >> In Coldfire arch, timer_init() is implemented in lib/time.c, as to >> setup and start the system timer overflow interrupt. It is called later >> from board_init_r(), line 863, after interrupt_init(). >> >> So, no :( unless you don't have some suggestion, i don't see any easy >> way to keep that timer_init() call enabled in board_init_f(). > > My only ideas are: > > - user driver model for timer and then call the interrupt init from > your driver's probe() method > - make timer_init() a nop for you arch > thanks, it sounds good. Ok, i see the patch has been applied to master so we have the things working for now. I'll try to do the change above in the next future, i keep it in the todo list. Regards, Angelo > Regards, > Simon >
diff --git a/common/board_f.c b/common/board_f.c index d9431ee79a..30e588e213 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -740,7 +740,9 @@ static const init_fnc_t init_sequence_f[] = { /* get CPU and bus clocks according to the environment variable */ get_clocks, /* get CPU and bus clocks (etc.) */ #endif +#if !defined(CONFIG_M68K) timer_init, /* initialize timer */ +#endif #if defined(CONFIG_BOARD_POSTCLK_INIT) board_postclk_init, #endif
Coldfire arch is not happy with timer_init since interrupt handlers are still not set at that stage, and the boot hangs silently. Signed-off-by: Angelo Dureghello <angelo@sysam.it> --- common/board_f.c | 2 ++ 1 file changed, 2 insertions(+)