Message ID | 20170404123856.3052-1-andriy.shevchenko@linux.intel.com |
---|---|
State | New |
Headers | show |
On Tue, 04 Apr 2017, Andy Shevchenko wrote: > Crystal Cove and Whiskey Cove are two different PMICs which are > installed on Intel Atom SoC based platforms. > > Moreover there are two independent drivers that by some reason were > supposed (*) to get into one kernel module. > > Fix the mess by clarifying Kconfig option for Crystal Cove and split > Whiskey Cove out of it. > > (*) It looks like the configuration was never tested with > INTEL_SOC_PMIC=n. The line in Makefile is actually wrong. > > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> (supporter:ACPI) > Acked-by: Linus Walleij <linus.walleij@linaro.org> > Acked-by: Zhang Rui <rui.zhang@intel.com> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > --- > - fix dependency for now, proper fix is to provide headers in platform_data/x86 > - add tags > drivers/acpi/Kconfig | 2 +- > drivers/gpio/Kconfig | 2 +- > drivers/mfd/Kconfig | 15 +++++++++++++-- > drivers/mfd/Makefile | 2 +- > drivers/platform/x86/Kconfig | 2 +- > drivers/thermal/Kconfig | 2 +- > 6 files changed, 18 insertions(+), 7 deletions(-) Applied, thanks. > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > index 3e15bf8f99f7..47d4e7be7a46 100644 > --- a/drivers/acpi/Kconfig > +++ b/drivers/acpi/Kconfig > @@ -512,7 +512,7 @@ config XPOWER_PMIC_OPREGION > > config BXT_WC_PMIC_OPREGION > bool "ACPI operation region support for BXT WhiskeyCove PMIC" > - depends on INTEL_SOC_PMIC > + depends on INTEL_SOC_PMIC_BXTWC > help > This config adds ACPI operation region support for BXT WhiskeyCove PMIC. > > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index 63ceed246b6f..05e8fbfb3d85 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -1053,7 +1053,7 @@ config GPIO_UCB1400 > > config GPIO_WHISKEY_COVE > tristate "GPIO support for Whiskey Cove PMIC" > - depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC > + depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC_BXTWC > select GPIOLIB_IRQCHIP > help > Support for GPIO pins on Whiskey Cove PMIC. > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index ce3a9180a765..a48176eb9b48 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -446,18 +446,29 @@ config LPC_SCH > System Management Bus and General Purpose I/O. > > config INTEL_SOC_PMIC > - bool "Support for Intel Atom SoC PMIC" > + bool "Support for Crystal Cove PMIC" > depends on GPIOLIB > depends on I2C=y > select MFD_CORE > select REGMAP_I2C > select REGMAP_IRQ > help > - Select this option to enable support for the PMIC device > + Select this option to enable support for Crystal Cove PMIC > on some Intel SoC systems. The PMIC provides ADC, GPIO, > thermal, charger and related power management functions > on these systems. > > +config INTEL_SOC_PMIC_BXTWC > + tristate "Support for Intel Broxton Whiskey Cove PMIC" > + depends on INTEL_PMC_IPC > + select MFD_CORE > + select REGMAP_IRQ > + help > + Select this option to enable support for Whiskey Cove PMIC > + on Intel Broxton systems. The PMIC provides ADC, GPIO, > + thermal, charger and related power management functions > + on these systems. > + > config MFD_INTEL_LPSS > tristate > select COMMON_CLK > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index fa86dbe65e52..c16bf1ea0ea9 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -212,8 +212,8 @@ obj-$(CONFIG_MFD_RT5033) += rt5033.o > obj-$(CONFIG_MFD_SKY81452) += sky81452.o > > intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o > -intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o > obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o > +obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o > obj-$(CONFIG_MFD_MT6397) += mt6397-core.o > > obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > index 5602bdfcad65..4c0933174cd9 100644 > --- a/drivers/platform/x86/Kconfig > +++ b/drivers/platform/x86/Kconfig > @@ -1020,7 +1020,7 @@ config INTEL_PMC_IPC > config INTEL_BXTWC_PMIC_TMU > tristate "Intel BXT Whiskey Cove TMU Driver" > depends on REGMAP > - depends on INTEL_SOC_PMIC && INTEL_PMC_IPC > + depends on INTEL_SOC_PMIC_BXTWC && INTEL_PMC_IPC > ---help--- > Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature. > This driver enables the alarm wakeup functionality in the TMU unit > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index 93474015bb1d..8e47cfaa9aab 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -353,7 +353,7 @@ endmenu > > config INTEL_BXT_PMIC_THERMAL > tristate "Intel Broxton PMIC thermal driver" > - depends on X86 && INTEL_SOC_PMIC && REGMAP > + depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP > help > Select this driver for Intel Broxton PMIC with ADC channels monitoring > system temperature measurements and alerts.
On Tue, 2017-04-11 at 14:54 +0100, Lee Jones wrote: > On Tue, 04 Apr 2017, Andy Shevchenko wrote: > > > Crystal Cove and Whiskey Cove are two different PMICs which are > > installed on Intel Atom SoC based platforms. > > > > Moreover there are two independent drivers that by some reason were > > supposed (*) to get into one kernel module. > > > > Fix the mess by clarifying Kconfig option for Crystal Cove and split > > Whiskey Cove out of it. > > > > (*) It looks like the configuration was never tested with > > INTEL_SOC_PMIC=n. The line in Makefile is actually wrong. > > > > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> (supporter:ACPI) > > Acked-by: Linus Walleij <linus.walleij@linaro.org> > > Acked-by: Zhang Rui <rui.zhang@intel.com> > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > --- > > - fix dependency for now, proper fix is to provide headers in > > platform_data/x86 > > - add tags > > drivers/acpi/Kconfig | 2 +- > > drivers/gpio/Kconfig | 2 +- > > drivers/mfd/Kconfig | 15 +++++++++++++-- > > drivers/mfd/Makefile | 2 +- > > drivers/platform/x86/Kconfig | 2 +- > > drivers/thermal/Kconfig | 2 +- > > 6 files changed, 18 insertions(+), 7 deletions(-) > > Applied, thanks. I didn't see it in next. Does it cause build issues still? I didn't get any report on it.
On Tue, 18 Apr 2017, Andy Shevchenko wrote: > On Tue, 2017-04-11 at 14:54 +0100, Lee Jones wrote: > > On Tue, 04 Apr 2017, Andy Shevchenko wrote: > > > > > Crystal Cove and Whiskey Cove are two different PMICs which are > > > installed on Intel Atom SoC based platforms. > > > > > > Moreover there are two independent drivers that by some reason were > > > supposed (*) to get into one kernel module. > > > > > > Fix the mess by clarifying Kconfig option for Crystal Cove and split > > > Whiskey Cove out of it. > > > > > > (*) It looks like the configuration was never tested with > > > INTEL_SOC_PMIC=n. The line in Makefile is actually wrong. > > > > > > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> (supporter:ACPI) > > > Acked-by: Linus Walleij <linus.walleij@linaro.org> > > > Acked-by: Zhang Rui <rui.zhang@intel.com> > > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > > --- > > > - fix dependency for now, proper fix is to provide headers in > > > platform_data/x86 > > > - add tags > > > drivers/acpi/Kconfig | 2 +- > > > drivers/gpio/Kconfig | 2 +- > > > drivers/mfd/Kconfig | 15 +++++++++++++-- > > > drivers/mfd/Makefile | 2 +- > > > drivers/platform/x86/Kconfig | 2 +- > > > drivers/thermal/Kconfig | 2 +- > > > 6 files changed, 18 insertions(+), 7 deletions(-) > > > > Applied, thanks. > > I didn't see it in next. Does it cause build issues still? I didn't get > any report on it. It's there now.
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 3e15bf8f99f7..47d4e7be7a46 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -512,7 +512,7 @@ config XPOWER_PMIC_OPREGION config BXT_WC_PMIC_OPREGION bool "ACPI operation region support for BXT WhiskeyCove PMIC" - depends on INTEL_SOC_PMIC + depends on INTEL_SOC_PMIC_BXTWC help This config adds ACPI operation region support for BXT WhiskeyCove PMIC. diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 63ceed246b6f..05e8fbfb3d85 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1053,7 +1053,7 @@ config GPIO_UCB1400 config GPIO_WHISKEY_COVE tristate "GPIO support for Whiskey Cove PMIC" - depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC + depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC_BXTWC select GPIOLIB_IRQCHIP help Support for GPIO pins on Whiskey Cove PMIC. diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index ce3a9180a765..a48176eb9b48 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -446,18 +446,29 @@ config LPC_SCH System Management Bus and General Purpose I/O. config INTEL_SOC_PMIC - bool "Support for Intel Atom SoC PMIC" + bool "Support for Crystal Cove PMIC" depends on GPIOLIB depends on I2C=y select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help - Select this option to enable support for the PMIC device + Select this option to enable support for Crystal Cove PMIC on some Intel SoC systems. The PMIC provides ADC, GPIO, thermal, charger and related power management functions on these systems. +config INTEL_SOC_PMIC_BXTWC + tristate "Support for Intel Broxton Whiskey Cove PMIC" + depends on INTEL_PMC_IPC + select MFD_CORE + select REGMAP_IRQ + help + Select this option to enable support for Whiskey Cove PMIC + on Intel Broxton systems. The PMIC provides ADC, GPIO, + thermal, charger and related power management functions + on these systems. + config MFD_INTEL_LPSS tristate select COMMON_CLK diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index fa86dbe65e52..c16bf1ea0ea9 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -212,8 +212,8 @@ obj-$(CONFIG_MFD_RT5033) += rt5033.o obj-$(CONFIG_MFD_SKY81452) += sky81452.o intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o -intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o +obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o obj-$(CONFIG_MFD_MT6397) += mt6397-core.o obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 5602bdfcad65..4c0933174cd9 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -1020,7 +1020,7 @@ config INTEL_PMC_IPC config INTEL_BXTWC_PMIC_TMU tristate "Intel BXT Whiskey Cove TMU Driver" depends on REGMAP - depends on INTEL_SOC_PMIC && INTEL_PMC_IPC + depends on INTEL_SOC_PMIC_BXTWC && INTEL_PMC_IPC ---help--- Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature. This driver enables the alarm wakeup functionality in the TMU unit diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 93474015bb1d..8e47cfaa9aab 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -353,7 +353,7 @@ endmenu config INTEL_BXT_PMIC_THERMAL tristate "Intel Broxton PMIC thermal driver" - depends on X86 && INTEL_SOC_PMIC && REGMAP + depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP help Select this driver for Intel Broxton PMIC with ADC channels monitoring system temperature measurements and alerts.