Message ID | 1490232332-19274-1-git-send-email-gerg@linux-m68k.org |
---|---|
State | Changes Requested, archived |
Delegated to: | David Miller |
Headers | show |
Greg Ungerer <gerg@linux-m68k.org> writes: > Add support for the net stats64 counters to the usbnet core and then to > the qmi_wwan driver. > > This is a strait forward addition of 64bit counters for RX and TX packets > and byte counts. It is done in the same style as for the other net drivers > that support stats64. > > The bulk of the change is to the usbnet core. Then it is trivial to use > that in the qmi_wwan.c driver. It would be very simple to extend this > support to other usbnet based drivers. > > The motivation to add this is that it is not particularly difficult to > get the RX and TX byte counts to wrap on 32bit platforms. You must have a higher quota than me :) But the patch does not apply to current net-next du to a conflict with the ethtool_{get|set}_link_ksettings changes. > +void usbnet_get_stats64(struct net_device *net, struct rtnl_link_stats64 *stats) > +{ > + struct usbnet *dev = netdev_priv(net); > + unsigned int start; > + > + netdev_stats_to_stats64(stats, &net->stats); > + > + do { > + start = u64_stats_fetch_begin_irq(&dev->stats.syncp); > + stats->rx_packets = dev->stats.rx_packets; > + stats->rx_bytes = dev->stats.rx_bytes; > + stats->tx_packets = dev->stats.tx_packets; > + stats->tx_bytes = dev->stats.tx_bytes; > + } while (u64_stats_fetch_retry_irq(&dev->stats.syncp, start)); > +} > + And I believe EXPORT_SYMBOL is missing here? Bjørn
Am Donnerstag, den 23.03.2017, 11:25 +1000 schrieb Greg Ungerer: > Add support for the net stats64 counters to the usbnet core and then to > the qmi_wwan driver. > > This is a strait forward addition of 64bit counters for RX and TX packets > and byte counts. It is done in the same style as for the other net drivers > that support stats64. > > The bulk of the change is to the usbnet core. Then it is trivial to use > that in the qmi_wwan.c driver. It would be very simple to extend this > support to other usbnet based drivers. > > The motivation to add this is that it is not particularly difficult to > get the RX and TX byte counts to wrap on 32bit platforms. Hi, you need to export the symbol usbnet_get_stats64 Other than that it looks good. Regards Oliver
Hi Greg,
[auto build test ERROR on net/master]
[also build test ERROR on v4.11-rc3]
[cannot apply to net-next/master next-20170323]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Greg-Ungerer/net-usbnet-support-64bit-stats-in-qmi_wwan-driver/20170323-171629
config: x86_64-rhel (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
# save the attached .config to linux build tree
make ARCH=x86_64
All errors (new ones prefixed by >>):
>> ERROR: "usbnet_get_stats64" [drivers/net/usb/qmi_wwan.ko] undefined!
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Hi Bjorn, On 23/03/17 18:33, Bjørn Mork wrote: > Greg Ungerer <gerg@linux-m68k.org> writes: > >> Add support for the net stats64 counters to the usbnet core and then to >> the qmi_wwan driver. >> >> This is a strait forward addition of 64bit counters for RX and TX packets >> and byte counts. It is done in the same style as for the other net drivers >> that support stats64. >> >> The bulk of the change is to the usbnet core. Then it is trivial to use >> that in the qmi_wwan.c driver. It would be very simple to extend this >> support to other usbnet based drivers. >> >> The motivation to add this is that it is not particularly difficult to >> get the RX and TX byte counts to wrap on 32bit platforms. > > You must have a higher quota than me :) Well, not me personally :-) > But the patch does not apply to current net-next du to a conflict with > the ethtool_{get|set}_link_ksettings changes. Ok, will respin against net-next. I generated this against 4.11-rc2. >> +void usbnet_get_stats64(struct net_device *net, struct rtnl_link_stats64 *stats) >> +{ >> + struct usbnet *dev = netdev_priv(net); >> + unsigned int start; >> + >> + netdev_stats_to_stats64(stats, &net->stats); >> + >> + do { >> + start = u64_stats_fetch_begin_irq(&dev->stats.syncp); >> + stats->rx_packets = dev->stats.rx_packets; >> + stats->rx_bytes = dev->stats.rx_bytes; >> + stats->tx_packets = dev->stats.tx_packets; >> + stats->tx_bytes = dev->stats.tx_bytes; >> + } while (u64_stats_fetch_retry_irq(&dev->stats.syncp, start)); >> +} >> + > > And I believe EXPORT_SYMBOL is missing here? Yep, will fix that too. Thanks. Regards Greg
Hi Oliver, On 23/03/17 18:46, Oliver Neukum wrote: > Am Donnerstag, den 23.03.2017, 11:25 +1000 schrieb Greg Ungerer: >> Add support for the net stats64 counters to the usbnet core and then to >> the qmi_wwan driver. >> >> This is a strait forward addition of 64bit counters for RX and TX packets >> and byte counts. It is done in the same style as for the other net drivers >> that support stats64. >> >> The bulk of the change is to the usbnet core. Then it is trivial to use >> that in the qmi_wwan.c driver. It would be very simple to extend this >> support to other usbnet based drivers. >> >> The motivation to add this is that it is not particularly difficult to >> get the RX and TX byte counts to wrap on 32bit platforms. > > Hi, > > you need to export the symbol usbnet_get_stats64 > Other than that it looks good. Thanks. I will respin a v2 with that fixed. Regards Greg
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 503a9f0..eb09e79 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -328,6 +328,7 @@ static int qmi_wwan_mac_addr(struct net_device *dev, void *p) .ndo_change_mtu = usbnet_change_mtu, .ndo_set_mac_address = qmi_wwan_mac_addr, .ndo_validate_addr = eth_validate_addr, + .ndo_get_stats64 = usbnet_get_stats64, }; /* using a counter to merge subdriver requests with our own into a diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 3de65ea..5dc0f15 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -330,6 +330,11 @@ void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb) dev->net->stats.rx_packets++; dev->net->stats.rx_bytes += skb->len; + u64_stats_update_begin(&dev->stats.syncp); + dev->stats.rx_packets++; + dev->stats.rx_bytes += skb->len; + u64_stats_update_end(&dev->stats.syncp); + netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n", skb->len + sizeof (struct ethhdr), skb->protocol); memset (skb->cb, 0, sizeof (struct skb_data)); @@ -980,6 +985,22 @@ int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd) } EXPORT_SYMBOL_GPL(usbnet_set_settings); +void usbnet_get_stats64(struct net_device *net, struct rtnl_link_stats64 *stats) +{ + struct usbnet *dev = netdev_priv(net); + unsigned int start; + + netdev_stats_to_stats64(stats, &net->stats); + + do { + start = u64_stats_fetch_begin_irq(&dev->stats.syncp); + stats->rx_packets = dev->stats.rx_packets; + stats->rx_bytes = dev->stats.rx_bytes; + stats->tx_packets = dev->stats.tx_packets; + stats->tx_bytes = dev->stats.tx_bytes; + } while (u64_stats_fetch_retry_irq(&dev->stats.syncp, start)); +} + u32 usbnet_get_link (struct net_device *net) { struct usbnet *dev = netdev_priv(net); @@ -1213,6 +1234,11 @@ static void tx_complete (struct urb *urb) if (urb->status == 0) { dev->net->stats.tx_packets += entry->packets; dev->net->stats.tx_bytes += entry->length; + + u64_stats_update_begin(&dev->stats.syncp); + dev->stats.tx_packets += entry->packets; + dev->stats.tx_bytes += entry->length; + u64_stats_update_end(&dev->stats.syncp); } else { dev->net->stats.tx_errors++; @@ -1657,6 +1683,7 @@ void usbnet_disconnect (struct usb_interface *intf) init_timer (&dev->delay); mutex_init (&dev->phy_mutex); mutex_init(&dev->interrupt_mutex); + u64_stats_init(&dev->stats.syncp); dev->interrupt_count = 0; dev->net = net; diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 6e0ce8c..f381dd8 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -22,6 +22,14 @@ #ifndef __LINUX_USB_USBNET_H #define __LINUX_USB_USBNET_H +struct usbnet_stats64 { + struct u64_stats_sync syncp; + u64 rx_packets; + u64 rx_bytes; + u64 tx_packets; + u64 tx_bytes; +}; + /* interface from usbnet core to each USB networking link we handle */ struct usbnet { /* housekeeping */ @@ -64,6 +72,8 @@ struct usbnet { struct usb_anchor deferred; struct tasklet_struct bh; + struct usbnet_stats64 stats; + struct work_struct kevent; unsigned long flags; # define EVENT_TX_HALT 0 @@ -265,6 +275,8 @@ extern int usbnet_get_settings(struct net_device *net, struct ethtool_cmd *cmd); extern int usbnet_set_settings(struct net_device *net, struct ethtool_cmd *cmd); +extern void usbnet_get_stats64(struct net_device *dev, + struct rtnl_link_stats64 *stats); extern u32 usbnet_get_link(struct net_device *net); extern u32 usbnet_get_msglevel(struct net_device *); extern void usbnet_set_msglevel(struct net_device *, u32);
Add support for the net stats64 counters to the usbnet core and then to the qmi_wwan driver. This is a strait forward addition of 64bit counters for RX and TX packets and byte counts. It is done in the same style as for the other net drivers that support stats64. The bulk of the change is to the usbnet core. Then it is trivial to use that in the qmi_wwan.c driver. It would be very simple to extend this support to other usbnet based drivers. The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> --- drivers/net/usb/qmi_wwan.c | 1 + drivers/net/usb/usbnet.c | 27 +++++++++++++++++++++++++++ include/linux/usb/usbnet.h | 12 ++++++++++++ 3 files changed, 40 insertions(+)