Message ID | 20170218232339.52vbbpvv2sosmcc5@lenoch |
---|---|
State | Accepted |
Commit | d12814e7c50b5fc4f22cf0e94f0c418c631357ae |
Delegated to: | Tom Rini |
Headers | show |
On Sun, Feb 19, 2017 at 12:23:39AM +0100, Ladislav Michl wrote: > ISEE's U-Boot and Linux are using 1bit ECC scheme, while we > switched to 8bit ECC to fullfill flash specification requirements. > However when trying to run U-Boot on board with 1bit ECC'd data > on flash, UBI code takes several minutes to pass scan as reading > of every block ends with ecc error (which is also printed on > console). > So, until proper solution is developed, disable environment > alltogether. > > Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Applied to u-boot/master, thanks!
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index ac0df3e08b..70d337e6f1 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -140,7 +140,7 @@ #define CONFIG_SPL_UBI_INFO_ADDR 0x88080000 /* environment organization */ -#define CONFIG_ENV_IS_IN_UBI 1 +#define CONFIG_ENV_IS_NOWHERE 1 #define CONFIG_ENV_UBI_PART "UBI" #define CONFIG_ENV_UBI_VOLUME "config" #define CONFIG_ENV_UBI_VOLUME_REDUND "config_r"
ISEE's U-Boot and Linux are using 1bit ECC scheme, while we switched to 8bit ECC to fullfill flash specification requirements. However when trying to run U-Boot on board with 1bit ECC'd data on flash, UBI code takes several minutes to pass scan as reading of every block ends with ecc error (which is also printed on console). So, until proper solution is developed, disable environment alltogether. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> --- include/configs/omap3_igep00x0.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)