Message ID | 20170221101855.23940-5-aschultz@tpip.net |
---|---|
State | Deferred, archived |
Delegated to: | David Miller |
Headers | show |
On Tue, Feb 21, 2017 at 2:18 AM, Andreas Schultz <aschultz@tpip.net> wrote: > Add network device to gtp context in preparation for splitting > the TEID from the network device. > > Use this to rework the socker rx path. Move the common RX part > of v0 and v1 into a helper. Also move the final rx part into > that helper as well. > Andeas, How are these GTP kernel patches being tested? Is it possible to create some sort of GTP network device that separates out just the datapath for development in the same way that VXLAN did this? Tom > Signed-off-by: Andreas Schultz <aschultz@tpip.net> > --- > drivers/net/gtp.c | 80 ++++++++++++++++++++++++++++++------------------------- > 1 file changed, 44 insertions(+), 36 deletions(-) > > diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c > index 961fb3c..fc0fff5 100644 > --- a/drivers/net/gtp.c > +++ b/drivers/net/gtp.c > @@ -58,6 +58,8 @@ struct pdp_ctx { > struct in_addr ms_addr_ip4; > struct in_addr sgsn_addr_ip4; > > + struct net_device *dev; > + > atomic_t tx_seq; > struct rcu_head rcu_head; > }; > @@ -175,6 +177,40 @@ static bool gtp_check_src_ms(struct sk_buff *skb, struct pdp_ctx *pctx, > return false; > } > > +static int gtp_rx(struct pdp_ctx *pctx, struct sk_buff *skb, unsigned int hdrlen, > + bool xnet) > +{ > + struct pcpu_sw_netstats *stats; > + > + if (!gtp_check_src_ms(skb, pctx, hdrlen)) { > + netdev_dbg(pctx->dev, "No PDP ctx for this MS\n"); > + return 1; > + } > + > + /* Get rid of the GTP + UDP headers. */ > + if (iptunnel_pull_header(skb, hdrlen, skb->protocol, xnet)) > + return -1; > + > + netdev_dbg(pctx->dev, "forwarding packet from GGSN to uplink\n"); > + > + /* Now that the UDP and the GTP header have been removed, set up the > + * new network header. This is required by the upper layer to > + * calculate the transport header. > + */ > + skb_reset_network_header(skb); > + > + skb->dev = pctx->dev; > + > + stats = this_cpu_ptr(pctx->dev->tstats); > + u64_stats_update_begin(&stats->syncp); > + stats->rx_packets++; > + stats->rx_bytes += skb->len; > + u64_stats_update_end(&stats->syncp); > + > + netif_rx(skb); > + return 0; > +} > + > /* 1 means pass up to the stack, -1 means drop and 0 means decapsulated. */ > static int gtp0_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb, > bool xnet) > @@ -201,13 +237,7 @@ static int gtp0_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb, > return 1; > } > > - if (!gtp_check_src_ms(skb, pctx, hdrlen)) { > - netdev_dbg(gtp->dev, "No PDP ctx for this MS\n"); > - return 1; > - } > - > - /* Get rid of the GTP + UDP headers. */ > - return iptunnel_pull_header(skb, hdrlen, skb->protocol, xnet); > + return gtp_rx(pctx, skb, hdrlen, xnet); > } > > static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb, > @@ -250,13 +280,7 @@ static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb, > return 1; > } > > - if (!gtp_check_src_ms(skb, pctx, hdrlen)) { > - netdev_dbg(gtp->dev, "No PDP ctx for this MS\n"); > - return 1; > - } > - > - /* Get rid of the GTP + UDP headers. */ > - return iptunnel_pull_header(skb, hdrlen, skb->protocol, xnet); > + return gtp_rx(pctx, skb, hdrlen, xnet); > } > > static void gtp_encap_destroy(struct sock *sk) > @@ -290,10 +314,9 @@ static void gtp_encap_disable(struct gtp_dev *gtp) > */ > static int gtp_encap_recv(struct sock *sk, struct sk_buff *skb) > { > - struct pcpu_sw_netstats *stats; > struct gtp_dev *gtp; > + int ret = 0; > bool xnet; > - int ret; > > gtp = rcu_dereference_sk_user_data(sk); > if (!gtp) > @@ -319,33 +342,17 @@ static int gtp_encap_recv(struct sock *sk, struct sk_buff *skb) > switch (ret) { > case 1: > netdev_dbg(gtp->dev, "pass up to the process\n"); > - return 1; > + break; > case 0: > - netdev_dbg(gtp->dev, "forwarding packet from GGSN to uplink\n"); > break; > case -1: > netdev_dbg(gtp->dev, "GTP packet has been dropped\n"); > kfree_skb(skb); > - return 0; > + ret = 0; > + break; > } > > - /* Now that the UDP and the GTP header have been removed, set up the > - * new network header. This is required by the upper layer to > - * calculate the transport header. > - */ > - skb_reset_network_header(skb); > - > - skb->dev = gtp->dev; > - > - stats = this_cpu_ptr(gtp->dev->tstats); > - u64_stats_update_begin(&stats->syncp); > - stats->rx_packets++; > - stats->rx_bytes += skb->len; > - u64_stats_update_end(&stats->syncp); > - > - netif_rx(skb); > - > - return 0; > + return ret; > } > > static int gtp_dev_init(struct net_device *dev) > @@ -951,6 +958,7 @@ static int ipv4_pdp_add(struct gtp_dev *gtp, struct genl_info *info) > if (pctx == NULL) > return -ENOMEM; > > + pctx->dev = gtp->dev; > ipv4_pdp_fill(pctx, info); > atomic_set(&pctx->tx_seq, 0); > > -- > 2.10.2 >
Hi Tom, ----- On Feb 22, 2017, at 6:41 PM, Tom Herbert tom@herbertland.com wrote: > On Tue, Feb 21, 2017 at 2:18 AM, Andreas Schultz <aschultz@tpip.net> wrote: >> Add network device to gtp context in preparation for splitting >> the TEID from the network device. >> >> Use this to rework the socker rx path. Move the common RX part >> of v0 and v1 into a helper. Also move the final rx part into >> that helper as well. >> > Andeas, > > How are these GTP kernel patches being tested? We rn each version in a test setup with a ePDG and a SGW that connects to a full GGSN/P-GW instance (based on erGW). We also run performance test (less often) with a commercial test software. > Is it possible to > create some sort of GTP network device > that separates out just the datapath for development in the > same way that VXLAN did this? We had this discussion about another patch: (http://marc.info/?l=linux-netdev&m=148611438811696&w=2) Currently the kernel module only supports the GGSN/P-GW side of the GTP tunnel. This is because we check the UE IP address in the GTP socket and use the destination IP in the network interface to find the PDP context. For a deployment in a real EPC, doing it the other way makes no sense with the current code. However for a test setup it makes perfect sense (either to use it as a driver to test other GTP nodes or to test out own implementation). So, I hope that we can integrate this soonish. libgtpnl contains two tools that be used for testing. gtp-link creates a network device and GTP sockets and keeps them alive. gtp-tunnel can then be used add PDP context to that. The only missing part for a bidirectional test setup is the above mentioned patch with the direction flag and support for that in the libgtpnl tools. Adding static tunnel support into the kernel module in any form makes IMHO no sense. GTP as defined by 3GPP always need a control instance and there are much better options for static tunnel encapsulations. Andreas > > Tom > >> Signed-off-by: Andreas Schultz <aschultz@tpip.net> >> --- >> drivers/net/gtp.c | 80 ++++++++++++++++++++++++++++++------------------------- >> 1 file changed, 44 insertions(+), 36 deletions(-) >> >> diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c >> index 961fb3c..fc0fff5 100644 >> --- a/drivers/net/gtp.c >> +++ b/drivers/net/gtp.c >> @@ -58,6 +58,8 @@ struct pdp_ctx { >> struct in_addr ms_addr_ip4; >> struct in_addr sgsn_addr_ip4; >> >> + struct net_device *dev; >> + >> atomic_t tx_seq; >> struct rcu_head rcu_head; >> }; >> @@ -175,6 +177,40 @@ static bool gtp_check_src_ms(struct sk_buff *skb, struct >> pdp_ctx *pctx, >> return false; >> } >> >> +static int gtp_rx(struct pdp_ctx *pctx, struct sk_buff *skb, unsigned int >> hdrlen, >> + bool xnet) >> +{ >> + struct pcpu_sw_netstats *stats; >> + >> + if (!gtp_check_src_ms(skb, pctx, hdrlen)) { >> + netdev_dbg(pctx->dev, "No PDP ctx for this MS\n"); >> + return 1; >> + } >> + >> + /* Get rid of the GTP + UDP headers. */ >> + if (iptunnel_pull_header(skb, hdrlen, skb->protocol, xnet)) >> + return -1; >> + >> + netdev_dbg(pctx->dev, "forwarding packet from GGSN to uplink\n"); >> + >> + /* Now that the UDP and the GTP header have been removed, set up the >> + * new network header. This is required by the upper layer to >> + * calculate the transport header. >> + */ >> + skb_reset_network_header(skb); >> + >> + skb->dev = pctx->dev; >> + >> + stats = this_cpu_ptr(pctx->dev->tstats); >> + u64_stats_update_begin(&stats->syncp); >> + stats->rx_packets++; >> + stats->rx_bytes += skb->len; >> + u64_stats_update_end(&stats->syncp); >> + >> + netif_rx(skb); >> + return 0; >> +} >> + >> /* 1 means pass up to the stack, -1 means drop and 0 means decapsulated. */ >> static int gtp0_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb, >> bool xnet) >> @@ -201,13 +237,7 @@ static int gtp0_udp_encap_recv(struct gtp_dev *gtp, struct >> sk_buff *skb, >> return 1; >> } >> >> - if (!gtp_check_src_ms(skb, pctx, hdrlen)) { >> - netdev_dbg(gtp->dev, "No PDP ctx for this MS\n"); >> - return 1; >> - } >> - >> - /* Get rid of the GTP + UDP headers. */ >> - return iptunnel_pull_header(skb, hdrlen, skb->protocol, xnet); >> + return gtp_rx(pctx, skb, hdrlen, xnet); >> } >> >> static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb, >> @@ -250,13 +280,7 @@ static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct >> sk_buff *skb, >> return 1; >> } >> >> - if (!gtp_check_src_ms(skb, pctx, hdrlen)) { >> - netdev_dbg(gtp->dev, "No PDP ctx for this MS\n"); >> - return 1; >> - } >> - >> - /* Get rid of the GTP + UDP headers. */ >> - return iptunnel_pull_header(skb, hdrlen, skb->protocol, xnet); >> + return gtp_rx(pctx, skb, hdrlen, xnet); >> } >> >> static void gtp_encap_destroy(struct sock *sk) >> @@ -290,10 +314,9 @@ static void gtp_encap_disable(struct gtp_dev *gtp) >> */ >> static int gtp_encap_recv(struct sock *sk, struct sk_buff *skb) >> { >> - struct pcpu_sw_netstats *stats; >> struct gtp_dev *gtp; >> + int ret = 0; >> bool xnet; >> - int ret; >> >> gtp = rcu_dereference_sk_user_data(sk); >> if (!gtp) >> @@ -319,33 +342,17 @@ static int gtp_encap_recv(struct sock *sk, struct sk_buff >> *skb) >> switch (ret) { >> case 1: >> netdev_dbg(gtp->dev, "pass up to the process\n"); >> - return 1; >> + break; >> case 0: >> - netdev_dbg(gtp->dev, "forwarding packet from GGSN to uplink\n"); >> break; >> case -1: >> netdev_dbg(gtp->dev, "GTP packet has been dropped\n"); >> kfree_skb(skb); >> - return 0; >> + ret = 0; >> + break; >> } >> >> - /* Now that the UDP and the GTP header have been removed, set up the >> - * new network header. This is required by the upper layer to >> - * calculate the transport header. >> - */ >> - skb_reset_network_header(skb); >> - >> - skb->dev = gtp->dev; >> - >> - stats = this_cpu_ptr(gtp->dev->tstats); >> - u64_stats_update_begin(&stats->syncp); >> - stats->rx_packets++; >> - stats->rx_bytes += skb->len; >> - u64_stats_update_end(&stats->syncp); >> - >> - netif_rx(skb); >> - >> - return 0; >> + return ret; >> } >> >> static int gtp_dev_init(struct net_device *dev) >> @@ -951,6 +958,7 @@ static int ipv4_pdp_add(struct gtp_dev *gtp, struct >> genl_info *info) >> if (pctx == NULL) >> return -ENOMEM; >> >> + pctx->dev = gtp->dev; >> ipv4_pdp_fill(pctx, info); >> atomic_set(&pctx->tx_seq, 0); >> >> -- >> 2.10.2
On Thu, Feb 23, 2017 at 1:19 AM, Andreas Schultz <aschultz@tpip.net> wrote: > Hi Tom, > > ----- On Feb 22, 2017, at 6:41 PM, Tom Herbert tom@herbertland.com wrote: > >> On Tue, Feb 21, 2017 at 2:18 AM, Andreas Schultz <aschultz@tpip.net> wrote: >>> Add network device to gtp context in preparation for splitting >>> the TEID from the network device. >>> >>> Use this to rework the socker rx path. Move the common RX part >>> of v0 and v1 into a helper. Also move the final rx part into >>> that helper as well. >>> >> Andeas, >> >> How are these GTP kernel patches being tested? > > We rn each version in a test setup with a ePDG and a SGW that > connects to a full GGSN/P-GW instance (based on erGW). > We also run performance test (less often) with a commercial > test software. > >> Is it possible to > create some sort of GTP network device >> that separates out just the datapath for development in the >> same way that VXLAN did this? > > We had this discussion about another patch: > (http://marc.info/?l=linux-netdev&m=148611438811696&w=2) > > Currently the kernel module only supports the GGSN/P-GW side > of the GTP tunnel. This is because we check the UE IP address > in the GTP socket and use the destination IP in the network > interface to find the PDP context. > > For a deployment in a real EPC, doing it the other way makes no > sense with the current code. However for a test setup it makes > perfect sense (either to use it as a driver to test other GTP > nodes or to test out own implementation). > > So, I hope that we can integrate this soonish. > > libgtpnl contains two tools that be used for testing. gtp-link > creates a network device and GTP sockets and keeps them alive. > gtp-tunnel can then be used add PDP context to that. The only > missing part for a bidirectional test setup is the above > mentioned patch with the direction flag and support for that > in the libgtpnl tools. > If there is a way for us to test this without setting up a full mobile network please provide details on how to do that in the commit log. > Adding static tunnel support into the kernel module in any form > makes IMHO no sense. GTP as defined by 3GPP always need a control > instance and there are much better options for static tunnel > encapsulations. > That misses the point. From the kernel point of view GTP is just another encapsulation protocol and we now have a lot of experience with those. The problem is when you post patches to improve it or fix issues, if there is no practical way to perform independent analysis or investigation. This makes GTP no different than a proprietary protocol to us and that severely limits the value of trying to work with the community. Tom > Andreas > >> >> Tom >> >>> Signed-off-by: Andreas Schultz <aschultz@tpip.net> >>> --- >>> drivers/net/gtp.c | 80 ++++++++++++++++++++++++++++++------------------------- >>> 1 file changed, 44 insertions(+), 36 deletions(-) >>> >>> diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c >>> index 961fb3c..fc0fff5 100644 >>> --- a/drivers/net/gtp.c >>> +++ b/drivers/net/gtp.c >>> @@ -58,6 +58,8 @@ struct pdp_ctx { >>> struct in_addr ms_addr_ip4; >>> struct in_addr sgsn_addr_ip4; >>> >>> + struct net_device *dev; >>> + >>> atomic_t tx_seq; >>> struct rcu_head rcu_head; >>> }; >>> @@ -175,6 +177,40 @@ static bool gtp_check_src_ms(struct sk_buff *skb, struct >>> pdp_ctx *pctx, >>> return false; >>> } >>> >>> +static int gtp_rx(struct pdp_ctx *pctx, struct sk_buff *skb, unsigned int >>> hdrlen, >>> + bool xnet) >>> +{ >>> + struct pcpu_sw_netstats *stats; >>> + >>> + if (!gtp_check_src_ms(skb, pctx, hdrlen)) { >>> + netdev_dbg(pctx->dev, "No PDP ctx for this MS\n"); >>> + return 1; >>> + } >>> + >>> + /* Get rid of the GTP + UDP headers. */ >>> + if (iptunnel_pull_header(skb, hdrlen, skb->protocol, xnet)) >>> + return -1; >>> + >>> + netdev_dbg(pctx->dev, "forwarding packet from GGSN to uplink\n"); >>> + >>> + /* Now that the UDP and the GTP header have been removed, set up the >>> + * new network header. This is required by the upper layer to >>> + * calculate the transport header. >>> + */ >>> + skb_reset_network_header(skb); >>> + >>> + skb->dev = pctx->dev; >>> + >>> + stats = this_cpu_ptr(pctx->dev->tstats); >>> + u64_stats_update_begin(&stats->syncp); >>> + stats->rx_packets++; >>> + stats->rx_bytes += skb->len; >>> + u64_stats_update_end(&stats->syncp); >>> + >>> + netif_rx(skb); >>> + return 0; >>> +} >>> + >>> /* 1 means pass up to the stack, -1 means drop and 0 means decapsulated. */ >>> static int gtp0_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb, >>> bool xnet) >>> @@ -201,13 +237,7 @@ static int gtp0_udp_encap_recv(struct gtp_dev *gtp, struct >>> sk_buff *skb, >>> return 1; >>> } >>> >>> - if (!gtp_check_src_ms(skb, pctx, hdrlen)) { >>> - netdev_dbg(gtp->dev, "No PDP ctx for this MS\n"); >>> - return 1; >>> - } >>> - >>> - /* Get rid of the GTP + UDP headers. */ >>> - return iptunnel_pull_header(skb, hdrlen, skb->protocol, xnet); >>> + return gtp_rx(pctx, skb, hdrlen, xnet); >>> } >>> >>> static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb, >>> @@ -250,13 +280,7 @@ static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct >>> sk_buff *skb, >>> return 1; >>> } >>> >>> - if (!gtp_check_src_ms(skb, pctx, hdrlen)) { >>> - netdev_dbg(gtp->dev, "No PDP ctx for this MS\n"); >>> - return 1; >>> - } >>> - >>> - /* Get rid of the GTP + UDP headers. */ >>> - return iptunnel_pull_header(skb, hdrlen, skb->protocol, xnet); >>> + return gtp_rx(pctx, skb, hdrlen, xnet); >>> } >>> >>> static void gtp_encap_destroy(struct sock *sk) >>> @@ -290,10 +314,9 @@ static void gtp_encap_disable(struct gtp_dev *gtp) >>> */ >>> static int gtp_encap_recv(struct sock *sk, struct sk_buff *skb) >>> { >>> - struct pcpu_sw_netstats *stats; >>> struct gtp_dev *gtp; >>> + int ret = 0; >>> bool xnet; >>> - int ret; >>> >>> gtp = rcu_dereference_sk_user_data(sk); >>> if (!gtp) >>> @@ -319,33 +342,17 @@ static int gtp_encap_recv(struct sock *sk, struct sk_buff >>> *skb) >>> switch (ret) { >>> case 1: >>> netdev_dbg(gtp->dev, "pass up to the process\n"); >>> - return 1; >>> + break; >>> case 0: >>> - netdev_dbg(gtp->dev, "forwarding packet from GGSN to uplink\n"); >>> break; >>> case -1: >>> netdev_dbg(gtp->dev, "GTP packet has been dropped\n"); >>> kfree_skb(skb); >>> - return 0; >>> + ret = 0; >>> + break; >>> } >>> >>> - /* Now that the UDP and the GTP header have been removed, set up the >>> - * new network header. This is required by the upper layer to >>> - * calculate the transport header. >>> - */ >>> - skb_reset_network_header(skb); >>> - >>> - skb->dev = gtp->dev; >>> - >>> - stats = this_cpu_ptr(gtp->dev->tstats); >>> - u64_stats_update_begin(&stats->syncp); >>> - stats->rx_packets++; >>> - stats->rx_bytes += skb->len; >>> - u64_stats_update_end(&stats->syncp); >>> - >>> - netif_rx(skb); >>> - >>> - return 0; >>> + return ret; >>> } >>> >>> static int gtp_dev_init(struct net_device *dev) >>> @@ -951,6 +958,7 @@ static int ipv4_pdp_add(struct gtp_dev *gtp, struct >>> genl_info *info) >>> if (pctx == NULL) >>> return -ENOMEM; >>> >>> + pctx->dev = gtp->dev; >>> ipv4_pdp_fill(pctx, info); >>> atomic_set(&pctx->tx_seq, 0); >>> >>> -- >>> 2.10.2
Hi Tom, On Thu, Feb 23, 2017 at 08:28:47AM -0800, Tom Herbert wrote: > If there is a way for us to test this without setting up a full mobile > network please provide details on how to do that in the commit log. There are different ways how to do this. With the existing in-kernel code (that lacks the "SGSN role" patch which would be for testing only), you can e.g. use two relatively small C-language programs from the openggnsn package [http://git.osmocom.org/openggsn/]: * OpenGGSN with support for libgtpnl and the kernel GTP-U module * sgsnemu (included in openggsn source tree) which implements a minimal SGSN-side of the tunnel. It will * perform the GTP-C signaling required with OpenGGSN (which in turn will then instruct the kernel to open a tunnel via the netlink interface). * start a tun/tap device for the "mobile station end" of the tunnel perform en/decapsulation of data between that tun/tap device and GTP in userspace The wiki at https://osmocom.org/projects/openggsn/wiki/OpenGGSN contains step-by-step instructions how to build and configure OpenGGSN with support for kernel GTP-U. It's nothing more than autotools based compile+install of libgtpnl followed by "./configure --enable-gtp-linux" and "make" for OpenGGSN What is not described on the above page is how to use sgsnemu to simulate the SGSN side, as within Osmocom we typically run the open source OsmoSGSN (a more "real" SGSN). So using two small binaries that can be compiled without much external dependencies (and very few lines of configuration), it is possible to do some functional testing of the kernel GTP module. For performance testing this of course won't work, as sgsnemu is running entirely in userspace. For performance testing, you would need a SGSN-side implementation of GTP-U that performs equally well or better than the GGSN-side implementation in the kernel. One option is the patch that has recently been submitted to netdev and which is under discussion. However, then you simply test one implementation against itself, which provides no interoperability guarantees with other implementations, and thus also limited in different regards. > > Adding static tunnel support into the kernel module in any form > > makes IMHO no sense. GTP as defined by 3GPP always need a control > > instance and there are much better options for static tunnel > > encapsulations. > > > That misses the point. From the kernel point of view GTP is just > another encapsulation protocol and we now have a lot of experience > with those. The problem is when you post patches to improve it or fix > issues, if there is no practical way to perform independent analysis > or investigation. This makes GTP no different than a proprietary > protocol to us and that severely limits the value of trying to work > with the community. I wholeheartedly agree. That's one of the reasons why I recently posted a RFC about what to do for (regression and other) testing of the kernel GTP-U module. I'll try to cook up some instructions extending https://osmocom.org/projects/openggsn/wiki/OpenGGSN to cover also sgsnemu for a basic use case of establishing one single tunnel. That's of course like a manual "HOWTO" and not yet anything that can be tested automatically. Regards, Harald
On Thu, Feb 23, 2017 at 8:46 AM, Harald Welte <laforge@gnumonks.org> wrote: > Hi Tom, > > On Thu, Feb 23, 2017 at 08:28:47AM -0800, Tom Herbert wrote: > >> If there is a way for us to test this without setting up a full mobile >> network please provide details on how to do that in the commit log. > > There are different ways how to do this. With the existing in-kernel > code (that lacks the "SGSN role" patch which would be for testing only), > you can e.g. use two relatively small C-language programs from the > openggnsn package [http://git.osmocom.org/openggsn/]: > > * OpenGGSN with support for libgtpnl and the kernel GTP-U module > * sgsnemu (included in openggsn source tree) which implements a minimal > SGSN-side of the tunnel. It will > * perform the GTP-C signaling required with OpenGGSN (which in turn > will then instruct the kernel to open a tunnel via the netlink > interface). > * start a tun/tap device for the "mobile station end" of the tunnel > perform en/decapsulation of data between that tun/tap device and GTP > in userspace > > The wiki at https://osmocom.org/projects/openggsn/wiki/OpenGGSN contains > step-by-step instructions how to build and configure OpenGGSN with > support for kernel GTP-U. It's nothing more than autotools based > compile+install of libgtpnl followed by "./configure --enable-gtp-linux" > and "make" for OpenGGSN > > What is not described on the above page is how to use sgsnemu to > simulate the SGSN side, as within Osmocom we typically run the open > source OsmoSGSN (a more "real" SGSN). > > So using two small binaries that can be compiled without much external > dependencies (and very few lines of configuration), it is possible to do > some functional testing of the kernel GTP module. For performance > testing this of course won't work, as sgsnemu is running entirely in > userspace. > I'm looking at the GTP encapsulation, it's not particularly complex. Is there any real reason why we can't just implement a netdev interface with static tunnels and configuration to do performance testing and development? For instance, if we want to add GSO/GRO support to GTP that's all we really need, the control plane should be inconsequential in that case. > For performance testing, you would need a SGSN-side implementation of > GTP-U that performs equally well or better than the GGSN-side > implementation in the kernel. One option is the patch that has recently > been submitted to netdev and which is under discussion. However, then > you simply test one implementation against itself, which provides no > interoperability guarantees with other implementations, and thus also > limited in different regards. > That's always true of any protocol we implement-- you can only show interoperability with what you test against. The best thing we can do to help GTP is not treat it as being something special! Treat it like any another encapsulation protocol to support in the kernel that needs to be tested, maintained, have good performance, be interoperable, etc. >> > Adding static tunnel support into the kernel module in any form >> > makes IMHO no sense. GTP as defined by 3GPP always need a control >> > instance and there are much better options for static tunnel >> > encapsulations. >> > >> That misses the point. From the kernel point of view GTP is just >> another encapsulation protocol and we now have a lot of experience >> with those. The problem is when you post patches to improve it or fix >> issues, if there is no practical way to perform independent analysis >> or investigation. This makes GTP no different than a proprietary >> protocol to us and that severely limits the value of trying to work >> with the community. > > I wholeheartedly agree. That's one of the reasons why I recently posted > a RFC about what to do for (regression and other) testing of the kernel > GTP-U module. > > I'll try to cook up some instructions extending > https://osmocom.org/projects/openggsn/wiki/OpenGGSN to cover also > sgsnemu for a basic use case of establishing one single tunnel. That's > of course like a manual "HOWTO" and not yet anything that can be tested > automatically. > That would be good. Thanks! > Regards, > Harald > > -- > - Harald Welte <laforge@gnumonks.org> http://laforge.gnumonks.org/ > ============================================================================ > "Privacy in residential applications is a desirable marketing option." > (ETSI EN 300 175-7 Ch. A6)
Hi Tom, On Thu, Feb 23, 2017 at 10:07:03AM -0800, Tom Herbert wrote: > I'm looking at the GTP encapsulation, it's not particularly complex. > Is there any real reason why we can't just implement a netdev > interface with static tunnels and configuration to do performance > testing and development? For instance, if we want to add GSO/GRO > support to GTP that's all we really need, the control plane should be > inconsequential in that case. As outlined several times in this thread, GTP tunneling is not symmetric. The current mainline code can only act as one of the two roles (GGSN/G-GW), not as the other one. The rationale is that in 3GPP networks, that is the only point in the network that takes native IP data (e.g.from the internet) and puts it into GTP. At all other places in the network, you don't have this combination. By the time the inner IP data arrives at the mobile phone, it is no longer encapsulated in GTP, as the lower layers have been adapted one or multiple times to other protocols by other network elements. There's a patch that has recently been submitted which adds the capability for the SGSN/S-GW side of a GTP-U tunnel, but that patch has so far not been merged (due to concersn about its netlink interface), and the patch *only* exists for testing, it has no real-world application in 3GPP networks. So as of now, it is not possible to run both endpoints of a tunnel in Linux. > > For performance testing, you would need a SGSN-side implementation of > > I'll try to cook up some instructions extending > > https://osmocom.org/projects/openggsn/wiki/OpenGGSN to cover also > > sgsnemu for a basic use case of establishing one single tunnel. That's > > of course like a manual "HOWTO" and not yet anything that can be tested > > automatically. > > > That would be good. Thanks! I've spent some hours earlier today on this, I expect the document to be ready at some point over the weekend.
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c index 961fb3c..fc0fff5 100644 --- a/drivers/net/gtp.c +++ b/drivers/net/gtp.c @@ -58,6 +58,8 @@ struct pdp_ctx { struct in_addr ms_addr_ip4; struct in_addr sgsn_addr_ip4; + struct net_device *dev; + atomic_t tx_seq; struct rcu_head rcu_head; }; @@ -175,6 +177,40 @@ static bool gtp_check_src_ms(struct sk_buff *skb, struct pdp_ctx *pctx, return false; } +static int gtp_rx(struct pdp_ctx *pctx, struct sk_buff *skb, unsigned int hdrlen, + bool xnet) +{ + struct pcpu_sw_netstats *stats; + + if (!gtp_check_src_ms(skb, pctx, hdrlen)) { + netdev_dbg(pctx->dev, "No PDP ctx for this MS\n"); + return 1; + } + + /* Get rid of the GTP + UDP headers. */ + if (iptunnel_pull_header(skb, hdrlen, skb->protocol, xnet)) + return -1; + + netdev_dbg(pctx->dev, "forwarding packet from GGSN to uplink\n"); + + /* Now that the UDP and the GTP header have been removed, set up the + * new network header. This is required by the upper layer to + * calculate the transport header. + */ + skb_reset_network_header(skb); + + skb->dev = pctx->dev; + + stats = this_cpu_ptr(pctx->dev->tstats); + u64_stats_update_begin(&stats->syncp); + stats->rx_packets++; + stats->rx_bytes += skb->len; + u64_stats_update_end(&stats->syncp); + + netif_rx(skb); + return 0; +} + /* 1 means pass up to the stack, -1 means drop and 0 means decapsulated. */ static int gtp0_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb, bool xnet) @@ -201,13 +237,7 @@ static int gtp0_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb, return 1; } - if (!gtp_check_src_ms(skb, pctx, hdrlen)) { - netdev_dbg(gtp->dev, "No PDP ctx for this MS\n"); - return 1; - } - - /* Get rid of the GTP + UDP headers. */ - return iptunnel_pull_header(skb, hdrlen, skb->protocol, xnet); + return gtp_rx(pctx, skb, hdrlen, xnet); } static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb, @@ -250,13 +280,7 @@ static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb, return 1; } - if (!gtp_check_src_ms(skb, pctx, hdrlen)) { - netdev_dbg(gtp->dev, "No PDP ctx for this MS\n"); - return 1; - } - - /* Get rid of the GTP + UDP headers. */ - return iptunnel_pull_header(skb, hdrlen, skb->protocol, xnet); + return gtp_rx(pctx, skb, hdrlen, xnet); } static void gtp_encap_destroy(struct sock *sk) @@ -290,10 +314,9 @@ static void gtp_encap_disable(struct gtp_dev *gtp) */ static int gtp_encap_recv(struct sock *sk, struct sk_buff *skb) { - struct pcpu_sw_netstats *stats; struct gtp_dev *gtp; + int ret = 0; bool xnet; - int ret; gtp = rcu_dereference_sk_user_data(sk); if (!gtp) @@ -319,33 +342,17 @@ static int gtp_encap_recv(struct sock *sk, struct sk_buff *skb) switch (ret) { case 1: netdev_dbg(gtp->dev, "pass up to the process\n"); - return 1; + break; case 0: - netdev_dbg(gtp->dev, "forwarding packet from GGSN to uplink\n"); break; case -1: netdev_dbg(gtp->dev, "GTP packet has been dropped\n"); kfree_skb(skb); - return 0; + ret = 0; + break; } - /* Now that the UDP and the GTP header have been removed, set up the - * new network header. This is required by the upper layer to - * calculate the transport header. - */ - skb_reset_network_header(skb); - - skb->dev = gtp->dev; - - stats = this_cpu_ptr(gtp->dev->tstats); - u64_stats_update_begin(&stats->syncp); - stats->rx_packets++; - stats->rx_bytes += skb->len; - u64_stats_update_end(&stats->syncp); - - netif_rx(skb); - - return 0; + return ret; } static int gtp_dev_init(struct net_device *dev) @@ -951,6 +958,7 @@ static int ipv4_pdp_add(struct gtp_dev *gtp, struct genl_info *info) if (pctx == NULL) return -ENOMEM; + pctx->dev = gtp->dev; ipv4_pdp_fill(pctx, info); atomic_set(&pctx->tx_seq, 0);
Add network device to gtp context in preparation for splitting the TEID from the network device. Use this to rework the socker rx path. Move the common RX part of v0 and v1 into a helper. Also move the final rx part into that helper as well. Signed-off-by: Andreas Schultz <aschultz@tpip.net> --- drivers/net/gtp.c | 80 ++++++++++++++++++++++++++++++------------------------- 1 file changed, 44 insertions(+), 36 deletions(-)