Message ID | 20170118012931.10964-1-f.fainelli@gmail.com |
---|---|
State | New |
Headers | show |
On Tue, Jan 17, 2017 at 05:29:30PM -0800, Florian Fainelli wrote: > The following changes since commit 7ce7d89f48834cefece7804d38fc5d85382edf77: > > Linux 4.10-rc1 (2016-12-25 16:13:08 -0800) > > are available in the git repository at: > > http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.11/devicetree > > for you to fetch changes up to d72b156515f60ac1f765fc024e93777e19ef8fda: > > Merge tag 'bcm2835-dt-next-2017-01-17' into devicetree/next (2017-01-17 17:10:32 -0800) > > ---------------------------------------------------------------- > This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.11, > please pull the following changes: > > - Rafal enables the UART by default on all BCM5301x, BCM4708, BCM4709 since > every device found out there has it enabled by default. He also fixes the > LED definitions for the Luxul XWR-3100 device, enables USB controllers and > their respective PHY devices, specifies the correct GPIO to power on USB > HUBs, adds the additional RAM bank for somes devices, and finally sets the > correct 5Ghz frequency limits on the Netgear R8000 > > - Jon does a number of Norsthar Plus SoC cleanups, fixes NAND partitions unit > addresses, adds QSPI support to a bunch of boards, adds Ethernet switch ports > to the BCM958625K reference board, enables 3rd Ethernet MAC instance to > relevant DTSes, enables Ethernet on the XMC board, and finally adds SD/MMC > support to the XMC board > > - Boris adds the Video Encoder nodes to the Raspberry Pi DTS include files > ands enables it on the relevant boards > > - Dan adds support for two new Luxul devices: XAP-1410 and XWR-1200, both > BCM47081 based SoCs > > ---------------------------------------------------------------- > Boris Brezillon (2): > ARM: bcm/dt: Add VEC node in bcm283x.dtsi > ARM: bcm/dt: Enable the VEC IP on all RaspberryPi boards > > Dan Haab (2): > ARM: BCM5301X: Add DT for Luxul XAP-1410 > ARM: BCM5301X: Add DT for Luxul XWR-1200 > > Florian Fainelli (1): > Merge tag 'bcm2835-dt-next-2017-01-17' into devicetree/next > > Jon Mason (7): > ARM: dts: NSP: DT Clean-ups > ARM: dts: NSP: Correct NAND partition unit address > ARM: dts: NSP: Add QSPI support to missing boards > ARM: dts: NSP: Add BCM958625K switch ports > ARM: dts: NSP: Add and enable amac2 > ARM: dts: NSP: Add Ethernet to NSP XMC > ARM: dts: NSP: Add SD/MMC support > > Rafa?? Mi??ecki (7): > ARM: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012 > ARM: BCM5301X: Fix LAN LED labels for Luxul XWR-3100 > ARM: BCM5301X: Specify USB controllers in DT > ARM: BCM5301X: Set GPIO enabling USB power on Netgear R7000 > ARM: BCM5301X: Specify all RAM by including an extra block > ARM: BCM53573: Specify USB ports of on-SoC controllers > ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000 Jon gets a passing grade, the rest gets F on patch subject formats. When in doubt, look at git log --oneline of arch/arm/boot/dts and see what others use. It's: ARM: dts: <platform>: <change description> Please respin. -Olof