| Message ID | 20170118012931.10964-2-f.fainelli@gmail.com |
|---|---|
| State | New |
| Headers | show |
On 01/17/2017 05:29 PM, Florian Fainelli wrote: > The following changes since commit 0c744ea4f77d72b3dcebb7a8f2684633ec79be88: > > Linux 4.10-rc2 (2017-01-01 14:31:53 -0800) Forgot to mention that, but this is against v4.10-rc2, because v4.10-rc1 just was not building on ARM64, thanks! > > are available in the git repository at: > > http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.11/devicetree-arm64 > > for you to fetch changes up to 096fe8726e5df2975ed29e1ecd881fa54c80878b: > > arm64: dts: NS2: add support for XMC form factor (2017-01-03 15:23:22 -0800) > > ---------------------------------------------------------------- > This pull request contains Broadcom ARM64-based SoC Device Tree changes for > 4.11, please pull the following changes: > > - Jon adds Device Tree nodes for the GICv2m and PAXB/PAXC PCIe interfaces on > the Northstar 2 SoCs, he also enables PAXC on the Northstar 2 SVK reference > board. He also updates the reserved memory entry for the Nitro firmware, > required to get the on-chip NICs to work. Finally he adds support for the > BCM958712DxXMC reference board which is a subset of existing boards. > > ---------------------------------------------------------------- > Jon Mason (4): > arm64: dts: NS2: enable GICv2m for PAXB/PAXC interfaces > arm64: dts: NS2: enable PAXC on NS2 SVK > arm64: dts: NS2: reserve memory for Nitro firmware > arm64: dts: NS2: add support for XMC form factor > > arch/arm64/boot/dts/broadcom/Makefile | 2 +- > arch/arm64/boot/dts/broadcom/ns2-svk.dts | 4 + > arch/arm64/boot/dts/broadcom/ns2-xmc.dts | 191 +++++++++++++++++++++++++++++++ > arch/arm64/boot/dts/broadcom/ns2.dtsi | 123 ++++++++++++++++---- > 4 files changed, 295 insertions(+), 25 deletions(-) > create mode 100644 arch/arm64/boot/dts/broadcom/ns2-xmc.dts >
On Tue, Jan 17, 2017 at 05:29:31PM -0800, Florian Fainelli wrote: > The following changes since commit 0c744ea4f77d72b3dcebb7a8f2684633ec79be88: > > Linux 4.10-rc2 (2017-01-01 14:31:53 -0800) > > are available in the git repository at: > > http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.11/devicetree-arm64 > > for you to fetch changes up to 096fe8726e5df2975ed29e1ecd881fa54c80878b: > > arm64: dts: NS2: add support for XMC form factor (2017-01-03 15:23:22 -0800) > > ---------------------------------------------------------------- > This pull request contains Broadcom ARM64-based SoC Device Tree changes for > 4.11, please pull the following changes: > > - Jon adds Device Tree nodes for the GICv2m and PAXB/PAXC PCIe interfaces on > the Northstar 2 SoCs, he also enables PAXC on the Northstar 2 SVK reference > board. He also updates the reserved memory entry for the Nitro firmware, > required to get the on-chip NICs to work. Finally he adds support for the > BCM958712DxXMC reference board which is a subset of existing boards. > > ---------------------------------------------------------------- > Jon Mason (4): > arm64: dts: NS2: enable GICv2m for PAXB/PAXC interfaces > arm64: dts: NS2: enable PAXC on NS2 SVK > arm64: dts: NS2: reserve memory for Nitro firmware > arm64: dts: NS2: add support for XMC form factor Merged, thanks. -Olof
On Tue, Jan 17, 2017 at 05:32:22PM -0800, Florian Fainelli wrote: > On 01/17/2017 05:29 PM, Florian Fainelli wrote: > > The following changes since commit 0c744ea4f77d72b3dcebb7a8f2684633ec79be88: > > > > Linux 4.10-rc2 (2017-01-01 14:31:53 -0800) > > Forgot to mention that, but this is against v4.10-rc2, because v4.10-rc1 > just was not building on ARM64, thanks! Yep, that's fine, We're at -rc3 on our branches this release. -Olof
The following changes since commit 0c744ea4f77d72b3dcebb7a8f2684633ec79be88: Linux 4.10-rc2 (2017-01-01 14:31:53 -0800) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.11/devicetree-arm64 for you to fetch changes up to 096fe8726e5df2975ed29e1ecd881fa54c80878b: arm64: dts: NS2: add support for XMC form factor (2017-01-03 15:23:22 -0800) ---------------------------------------------------------------- This pull request contains Broadcom ARM64-based SoC Device Tree changes for 4.11, please pull the following changes: - Jon adds Device Tree nodes for the GICv2m and PAXB/PAXC PCIe interfaces on the Northstar 2 SoCs, he also enables PAXC on the Northstar 2 SVK reference board. He also updates the reserved memory entry for the Nitro firmware, required to get the on-chip NICs to work. Finally he adds support for the BCM958712DxXMC reference board which is a subset of existing boards. ---------------------------------------------------------------- Jon Mason (4): arm64: dts: NS2: enable GICv2m for PAXB/PAXC interfaces arm64: dts: NS2: enable PAXC on NS2 SVK arm64: dts: NS2: reserve memory for Nitro firmware arm64: dts: NS2: add support for XMC form factor arch/arm64/boot/dts/broadcom/Makefile | 2 +- arch/arm64/boot/dts/broadcom/ns2-svk.dts | 4 + arch/arm64/boot/dts/broadcom/ns2-xmc.dts | 191 +++++++++++++++++++++++++++++++ arch/arm64/boot/dts/broadcom/ns2.dtsi | 123 ++++++++++++++++---- 4 files changed, 295 insertions(+), 25 deletions(-) create mode 100644 arch/arm64/boot/dts/broadcom/ns2-xmc.dts