| Message ID | 1481494905-18037-2-git-send-email-bgolaszewski@baylibre.com |
|---|---|
| State | New |
| Headers | show |
On Sun, Dec 11, 2016 at 11:21:44PM +0100, Bartosz Golaszewski wrote: > Some boards are equipped with simple, GPIO-driven power load switches. > An example of such ICs is the TI tps229* series. How is this different than a GPIO regulator? The input and output voltages just happen to be the same. I could be convinced this is different enough to have a different compatible, but it somewhat seems you want to use this for IIO, so you are creating a different binding for that usecase. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2016-12-13 20:27 GMT+01:00 Rob Herring <robh@kernel.org>: > On Sun, Dec 11, 2016 at 11:21:44PM +0100, Bartosz Golaszewski wrote: >> Some boards are equipped with simple, GPIO-driven power load switches. >> An example of such ICs is the TI tps229* series. > > How is this different than a GPIO regulator? The input and output > voltages just happen to be the same. I could be convinced this is > different enough to have a different compatible, but it somewhat seems > you want to use this for IIO, so you are creating a different binding > for that usecase. > It's more of a fixed regulator I suppose. Do you mean adding a new compatible to the fixed-regulator binding (e.g. "gpio-power-switch" or "simple-power-switch") and then providing an iio driver for toggling the switch? Thanks, Bartosz -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2016-12-14 18:36 GMT+01:00 Jonathan Cameron <jic23@jic23.retrosnub.co.uk>: > > > On 14 December 2016 16:58:21 GMT+00:00, Bartosz Golaszewski > <bgolaszewski@baylibre.com> wrote: >>2016-12-13 20:27 GMT+01:00 Rob Herring <robh@kernel.org>: >>> On Sun, Dec 11, 2016 at 11:21:44PM +0100, Bartosz Golaszewski wrote: >>>> Some boards are equipped with simple, GPIO-driven power load >>switches. >>>> An example of such ICs is the TI tps229* series. >>> >>> How is this different than a GPIO regulator? The input and output >>> voltages just happen to be the same. I could be convinced this is >>> different enough to have a different compatible, but it somewhat >>seems >>> you want to use this for IIO, so you are creating a different binding >>> for that usecase. >>> >> >>It's more of a fixed regulator I suppose. Do you mean adding a new >>compatible to the fixed-regulator binding (e.g. "gpio-power-switch" or >>"simple-power-switch") and then providing an iio driver for toggling >>the switch? > > I am rather torn on whether the IIO interface makes any sense beyond that of > convenience. > The question is: will the iio maintainers be ok with adding support for interfaces different than iio (I guess so since Lars already mentioned wanting to support the GPIO chardev)? If so, I'm ok with not using the iio framework in the kernel. > A bridge to a regulator in general might make sense to cover the case of a > reg effectively > acting as a DAC at the edge of the known hardware. > > Lars' point about perhaps adding support for the new gpio userspace stuff to > libiio would in > this case also be rather papering over the issue. > There is known hardware there so we should describe it! > > I think we should be considering this as the general case of the Linux > controlled power supply. > How do we want to represent that? > Ultimately does a general regulator userspace interface make sense? > > Classic case of people cutting our hardware in half and making boundaries > beyond which lie dragons. > > I would love to see the general case covered. > It seems as if this is already covered by the userspace-consumer regulator driver, but it doesn't speak device tree yet. I guess we could reuse it by merging the proposed gpio-power-switch binding and extending it to parse DT. Best regards, Bartosz Golaszewski -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Dec 14, 2016 at 10:58 AM, Bartosz Golaszewski <bgolaszewski@baylibre.com> wrote: > 2016-12-13 20:27 GMT+01:00 Rob Herring <robh@kernel.org>: >> On Sun, Dec 11, 2016 at 11:21:44PM +0100, Bartosz Golaszewski wrote: >>> Some boards are equipped with simple, GPIO-driven power load switches. >>> An example of such ICs is the TI tps229* series. >> >> How is this different than a GPIO regulator? The input and output >> voltages just happen to be the same. I could be convinced this is >> different enough to have a different compatible, but it somewhat seems >> you want to use this for IIO, so you are creating a different binding >> for that usecase. >> > > It's more of a fixed regulator I suppose. Do you mean adding a new > compatible to the fixed-regulator binding (e.g. "gpio-power-switch" or > "simple-power-switch") and then providing an iio driver for toggling > the switch? Yes, at least the first part. I view the switch as just a more specific subtype of a fixed-regulator. Whether an IIO driver is a separate discussion which is happening. Rob P.S. I really don't like compatibles with "simple". -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Dec 15, 2016 at 4:05 PM, Rob Herring <robh@kernel.org> wrote: > On Wed, Dec 14, 2016 at 10:58 AM, Bartosz Golaszewski > <bgolaszewski@baylibre.com> wrote: >> 2016-12-13 20:27 GMT+01:00 Rob Herring <robh@kernel.org>: >>> On Sun, Dec 11, 2016 at 11:21:44PM +0100, Bartosz Golaszewski wrote: >>>> Some boards are equipped with simple, GPIO-driven power load switches. >>>> An example of such ICs is the TI tps229* series. >>> >>> How is this different than a GPIO regulator? The input and output >>> voltages just happen to be the same. I could be convinced this is >>> different enough to have a different compatible, but it somewhat seems >>> you want to use this for IIO, so you are creating a different binding >>> for that usecase. >> >> It's more of a fixed regulator I suppose. Do you mean adding a new >> compatible to the fixed-regulator binding (e.g. "gpio-power-switch" or >> "simple-power-switch") and then providing an iio driver for toggling >> the switch? > > Yes, at least the first part. I view the switch as just a more > specific subtype of a fixed-regulator. Whether an IIO driver is a > separate discussion which is happening. The switch could also be an opto-isolator (for which I could use gpio-leds, too, although also without libiio control ;-) or a relay. While I agree a switch is a degenerate regulator, modelling it as a regulator feels a bit weird to me. Switches could be extended to e.g. double throw relays, or H-bridges using 4 GPIOs. BTW, I'm not an IIO expert, but from my limited knowledge, it looks like "O" support in IIO is limited to DACs? P.S. My motiviation is using libiio to control my board farm, which has a bank of opto-isolators in addition to BayLibre's ACME. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/23/2016 10:07 AM, Geert Uytterhoeven wrote: > BTW, I'm not an IIO expert, but from my limited knowledge, it looks like "O" > support in IIO is limited to DACs? Depends on what you categorize as DACs. There are also potentiometer/rheostat drivers. They are kind of like DACs but the unit you control are ohm, rather than current or voltage. -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Dec 11, 2016 at 11:21 PM, Bartosz Golaszewski <bgolaszewski@baylibre.com> wrote: > Some boards are equipped with simple, GPIO-driven power load switches. > An example of such ICs is the TI tps229* series. > > Add device tree bindings allowing to describe them. > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> (...) > .../bindings/power/gpio-power-switch.txt | 25 ++++++++++++++++++++++ Scrap this and use: Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 23/12/16 11:40, Lars-Peter Clausen wrote: > On 12/23/2016 10:07 AM, Geert Uytterhoeven wrote: >> BTW, I'm not an IIO expert, but from my limited knowledge, it looks like "O" >> support in IIO is limited to DACs? > > Depends on what you categorize as DACs. There are also > potentiometer/rheostat drivers. They are kind of like DACs but the unit you > control are ohm, rather than current or voltage. Though they are still in staging there are also things like function generators. I've been mulling doing a driver for the st-powerstep01 parts as well which is a smart stepper motor controller. At that level we'd need to start describing the connected stepper motors in DT :) Whole chunk of API to define to do that though - might well take longer than writing the driver. So in practice yeah - dac like things, but then on the input side they are almost all really ADCs with some funny analog stuff on the front end ;) Arguably switches are 1 bit DACs ;) The distinction here is whether 'what is passing through' the device is knowable. So regulators and your power switch are well described. A relay less so unless we know what load it is switching... + it's IIO. We are open to almost anything as long as we aren't stepping on any toes! Jonathan > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/power/gpio-power-switch.txt b/Documentation/devicetree/bindings/power/gpio-power-switch.txt new file mode 100644 index 0000000..21420ed --- /dev/null +++ b/Documentation/devicetree/bindings/power/gpio-power-switch.txt @@ -0,0 +1,25 @@ +GPIO Power Switch +----------------- + +This is the device tree binding for simple, GPIO-driven power load switches +that do not have any control signals. + +Required properties: + +- compatible: must be "gpio-power-switch" +- power-gpios: phandle for the GPIO driving the power load switch + +Optional properties: + +- power-switch-name: the name of the power switch +- power-switch-on: the power switch GPIO is driven high by default + +Example +------- + +acme_probe0_power_switch: gpio_power_switch@0 { + compatible = "gpio-power-switch"; + power-switch-name = "acme_probe0_switch"; + power-gpios = <&pca9535 1 GPIO_ACTIVE_HIGH>; + power-switch-on; +};
Some boards are equipped with simple, GPIO-driven power load switches. An example of such ICs is the TI tps229* series. Add device tree bindings allowing to describe them. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- .../bindings/power/gpio-power-switch.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/gpio-power-switch.txt