Message ID | 20161128105640.32363-1-amir@vadai.me |
---|---|
State | Accepted, archived |
Delegated to: | David Miller |
Headers | show |
+ if (offset > 0 && offset > skb->len) offset > skb->len is enough? On Mon, Nov 28, 2016 at 6:56 PM, Amir Vadai <amir@vadai.me> wrote: > Add a validation function to make sure offset is valid: > 1. Not below skb head (could happen when offset is negative). > 2. Validate both 'offset' and 'at'. > > Signed-off-by: Amir Vadai <amir@vadai.me> > --- > Hi Dave, > > Please pull to -stable branches. > > Changes from V0: > - Add a validation to the 'at' value (this is used as an offset too) > - Instead of validating the output of skb_header_pointer(), make sure that the > offset is good before calling it. > > Thanks, > Amir > net/sched/act_pedit.c | 24 ++++++++++++++++++++---- > 1 file changed, 20 insertions(+), 4 deletions(-) > > diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c > index b54d56d4959b..cf9b2fe8eac6 100644 > --- a/net/sched/act_pedit.c > +++ b/net/sched/act_pedit.c > @@ -108,6 +108,17 @@ static void tcf_pedit_cleanup(struct tc_action *a, int bind) > kfree(keys); > } > > +static bool offset_valid(struct sk_buff *skb, int offset) > +{ > + if (offset > 0 && offset > skb->len) > + return false; > + > + if (offset < 0 && -offset > skb_headroom(skb)) > + return false; > + > + return true; > +} > + > static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, > struct tcf_result *res) > { > @@ -134,6 +145,11 @@ static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, > if (tkey->offmask) { > char *d, _d; > > + if (!offset_valid(skb, off + tkey->at)) { > + pr_info("tc filter pedit 'at' offset %d out of bounds\n", > + off + tkey->at); > + goto bad; > + } > d = skb_header_pointer(skb, off + tkey->at, 1, > &_d); > if (!d) > @@ -146,10 +162,10 @@ static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, > " offset must be on 32 bit boundaries\n"); > goto bad; > } > - if (offset > 0 && offset > skb->len) { > - pr_info("tc filter pedit" > - " offset %d can't exceed pkt length %d\n", > - offset, skb->len); > + > + if (!offset_valid(skb, off + offset)) { > + pr_info("tc filter pedit offset %d out of bounds\n", > + offset); > goto bad; > } > > -- > 2.10.2 >
On Tue, Nov 29, 2016 at 10:32:05AM +0800, zhuyj wrote: > + if (offset > 0 && offset > skb->len) > > offset > skb->len is enough? offset is signed and skb->len is unsigned. Therefore for example if offset=-1 and skb->len=10, the actual comparison is 0xff...>10 > > On Mon, Nov 28, 2016 at 6:56 PM, Amir Vadai <amir@vadai.me> wrote: > > Add a validation function to make sure offset is valid: > > 1. Not below skb head (could happen when offset is negative). > > 2. Validate both 'offset' and 'at'. > > > > Signed-off-by: Amir Vadai <amir@vadai.me> > > --- > > Hi Dave, > > > > Please pull to -stable branches. > > > > Changes from V0: > > - Add a validation to the 'at' value (this is used as an offset too) > > - Instead of validating the output of skb_header_pointer(), make sure that the > > offset is good before calling it. > > > > Thanks, > > Amir > > net/sched/act_pedit.c | 24 ++++++++++++++++++++---- > > 1 file changed, 20 insertions(+), 4 deletions(-) > > > > diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c > > index b54d56d4959b..cf9b2fe8eac6 100644 > > --- a/net/sched/act_pedit.c > > +++ b/net/sched/act_pedit.c > > @@ -108,6 +108,17 @@ static void tcf_pedit_cleanup(struct tc_action *a, int bind) > > kfree(keys); > > } > > > > +static bool offset_valid(struct sk_buff *skb, int offset) > > +{ > > + if (offset > 0 && offset > skb->len) > > + return false; > > + > > + if (offset < 0 && -offset > skb_headroom(skb)) > > + return false; > > + > > + return true; > > +} > > + > > static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, > > struct tcf_result *res) > > { > > @@ -134,6 +145,11 @@ static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, > > if (tkey->offmask) { > > char *d, _d; > > > > + if (!offset_valid(skb, off + tkey->at)) { > > + pr_info("tc filter pedit 'at' offset %d out of bounds\n", > > + off + tkey->at); > > + goto bad; > > + } > > d = skb_header_pointer(skb, off + tkey->at, 1, > > &_d); > > if (!d) > > @@ -146,10 +162,10 @@ static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, > > " offset must be on 32 bit boundaries\n"); > > goto bad; > > } > > - if (offset > 0 && offset > skb->len) { > > - pr_info("tc filter pedit" > > - " offset %d can't exceed pkt length %d\n", > > - offset, skb->len); > > + > > + if (!offset_valid(skb, off + offset)) { > > + pr_info("tc filter pedit offset %d out of bounds\n", > > + offset); > > goto bad; > > } > > > > -- > > 2.10.2 > >
Thanks a lot. When will offset become -1? On Tue, Nov 29, 2016 at 3:14 PM, Amir Vadai <amir@vadai.me> wrote: > On Tue, Nov 29, 2016 at 10:32:05AM +0800, zhuyj wrote: >> + if (offset > 0 && offset > skb->len) >> >> offset > skb->len is enough? > offset is signed and skb->len is unsigned. Therefore for example if > offset=-1 and skb->len=10, the actual comparison is 0xff...>10 > >> >> On Mon, Nov 28, 2016 at 6:56 PM, Amir Vadai <amir@vadai.me> wrote: >> > Add a validation function to make sure offset is valid: >> > 1. Not below skb head (could happen when offset is negative). >> > 2. Validate both 'offset' and 'at'. >> > >> > Signed-off-by: Amir Vadai <amir@vadai.me> >> > --- >> > Hi Dave, >> > >> > Please pull to -stable branches. >> > >> > Changes from V0: >> > - Add a validation to the 'at' value (this is used as an offset too) >> > - Instead of validating the output of skb_header_pointer(), make sure that the >> > offset is good before calling it. >> > >> > Thanks, >> > Amir >> > net/sched/act_pedit.c | 24 ++++++++++++++++++++---- >> > 1 file changed, 20 insertions(+), 4 deletions(-) >> > >> > diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c >> > index b54d56d4959b..cf9b2fe8eac6 100644 >> > --- a/net/sched/act_pedit.c >> > +++ b/net/sched/act_pedit.c >> > @@ -108,6 +108,17 @@ static void tcf_pedit_cleanup(struct tc_action *a, int bind) >> > kfree(keys); >> > } >> > >> > +static bool offset_valid(struct sk_buff *skb, int offset) >> > +{ >> > + if (offset > 0 && offset > skb->len) >> > + return false; >> > + >> > + if (offset < 0 && -offset > skb_headroom(skb)) >> > + return false; >> > + >> > + return true; >> > +} >> > + >> > static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, >> > struct tcf_result *res) >> > { >> > @@ -134,6 +145,11 @@ static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, >> > if (tkey->offmask) { >> > char *d, _d; >> > >> > + if (!offset_valid(skb, off + tkey->at)) { >> > + pr_info("tc filter pedit 'at' offset %d out of bounds\n", >> > + off + tkey->at); >> > + goto bad; >> > + } >> > d = skb_header_pointer(skb, off + tkey->at, 1, >> > &_d); >> > if (!d) >> > @@ -146,10 +162,10 @@ static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, >> > " offset must be on 32 bit boundaries\n"); >> > goto bad; >> > } >> > - if (offset > 0 && offset > skb->len) { >> > - pr_info("tc filter pedit" >> > - " offset %d can't exceed pkt length %d\n", >> > - offset, skb->len); >> > + >> > + if (!offset_valid(skb, off + offset)) { >> > + pr_info("tc filter pedit offset %d out of bounds\n", >> > + offset); >> > goto bad; >> > } >> > >> > -- >> > 2.10.2 >> >
On Tue, Nov 29, 2016 at 05:27:05PM +0800, zhuyj wrote: > Thanks a lot. > When will offset become -1? offset is supplied by userspace. For example iproute2 tc tool. It is valid to supply a negative value, since offset is relative to the networking layer, one might want to edit a MAC layer field. Please use bottom posting when replying to mails... > > On Tue, Nov 29, 2016 at 3:14 PM, Amir Vadai <amir@vadai.me> wrote: > > On Tue, Nov 29, 2016 at 10:32:05AM +0800, zhuyj wrote: > >> + if (offset > 0 && offset > skb->len) > >> > >> offset > skb->len is enough? > > offset is signed and skb->len is unsigned. Therefore for example if > > offset=-1 and skb->len=10, the actual comparison is 0xff...>10 > > > >> > >> On Mon, Nov 28, 2016 at 6:56 PM, Amir Vadai <amir@vadai.me> wrote: > >> > Add a validation function to make sure offset is valid: > >> > 1. Not below skb head (could happen when offset is negative). > >> > 2. Validate both 'offset' and 'at'. > >> > > >> > Signed-off-by: Amir Vadai <amir@vadai.me> > >> > --- > >> > Hi Dave, > >> > > >> > Please pull to -stable branches. > >> > > >> > Changes from V0: > >> > - Add a validation to the 'at' value (this is used as an offset too) > >> > - Instead of validating the output of skb_header_pointer(), make sure that the > >> > offset is good before calling it. > >> > > >> > Thanks, > >> > Amir > >> > net/sched/act_pedit.c | 24 ++++++++++++++++++++---- > >> > 1 file changed, 20 insertions(+), 4 deletions(-) > >> > > >> > diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c > >> > index b54d56d4959b..cf9b2fe8eac6 100644 > >> > --- a/net/sched/act_pedit.c > >> > +++ b/net/sched/act_pedit.c > >> > @@ -108,6 +108,17 @@ static void tcf_pedit_cleanup(struct tc_action *a, int bind) > >> > kfree(keys); > >> > } > >> > > >> > +static bool offset_valid(struct sk_buff *skb, int offset) > >> > +{ > >> > + if (offset > 0 && offset > skb->len) > >> > + return false; > >> > + > >> > + if (offset < 0 && -offset > skb_headroom(skb)) > >> > + return false; > >> > + > >> > + return true; > >> > +} > >> > + > >> > static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, > >> > struct tcf_result *res) > >> > { > >> > @@ -134,6 +145,11 @@ static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, > >> > if (tkey->offmask) { > >> > char *d, _d; > >> > > >> > + if (!offset_valid(skb, off + tkey->at)) { > >> > + pr_info("tc filter pedit 'at' offset %d out of bounds\n", > >> > + off + tkey->at); > >> > + goto bad; > >> > + } > >> > d = skb_header_pointer(skb, off + tkey->at, 1, > >> > &_d); > >> > if (!d) > >> > @@ -146,10 +162,10 @@ static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, > >> > " offset must be on 32 bit boundaries\n"); > >> > goto bad; > >> > } > >> > - if (offset > 0 && offset > skb->len) { > >> > - pr_info("tc filter pedit" > >> > - " offset %d can't exceed pkt length %d\n", > >> > - offset, skb->len); > >> > + > >> > + if (!offset_valid(skb, off + offset)) { > >> > + pr_info("tc filter pedit offset %d out of bounds\n", > >> > + offset); > >> > goto bad; > >> > } > >> > > >> > -- > >> > 2.10.2 > >> >
From: Amir Vadai <amir@vadai.me> Date: Mon, 28 Nov 2016 12:56:40 +0200 > Add a validation function to make sure offset is valid: > 1. Not below skb head (could happen when offset is negative). > 2. Validate both 'offset' and 'at'. > > Signed-off-by: Amir Vadai <amir@vadai.me> Applied and queued up for -stable, thanks.
diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c index b54d56d4959b..cf9b2fe8eac6 100644 --- a/net/sched/act_pedit.c +++ b/net/sched/act_pedit.c @@ -108,6 +108,17 @@ static void tcf_pedit_cleanup(struct tc_action *a, int bind) kfree(keys); } +static bool offset_valid(struct sk_buff *skb, int offset) +{ + if (offset > 0 && offset > skb->len) + return false; + + if (offset < 0 && -offset > skb_headroom(skb)) + return false; + + return true; +} + static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, struct tcf_result *res) { @@ -134,6 +145,11 @@ static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, if (tkey->offmask) { char *d, _d; + if (!offset_valid(skb, off + tkey->at)) { + pr_info("tc filter pedit 'at' offset %d out of bounds\n", + off + tkey->at); + goto bad; + } d = skb_header_pointer(skb, off + tkey->at, 1, &_d); if (!d) @@ -146,10 +162,10 @@ static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a, " offset must be on 32 bit boundaries\n"); goto bad; } - if (offset > 0 && offset > skb->len) { - pr_info("tc filter pedit" - " offset %d can't exceed pkt length %d\n", - offset, skb->len); + + if (!offset_valid(skb, off + offset)) { + pr_info("tc filter pedit offset %d out of bounds\n", + offset); goto bad; }
Add a validation function to make sure offset is valid: 1. Not below skb head (could happen when offset is negative). 2. Validate both 'offset' and 'at'. Signed-off-by: Amir Vadai <amir@vadai.me> --- Hi Dave, Please pull to -stable branches. Changes from V0: - Add a validation to the 'at' value (this is used as an offset too) - Instead of validating the output of skb_header_pointer(), make sure that the offset is good before calling it. Thanks, Amir net/sched/act_pedit.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)