| Message ID | aaa2319e-bfbe-f875-1ac6-658636ac6d43@foss.arm.com |
|---|---|
| State | New |
| Headers | show |
Hi Thomas, On 03/11/16 16:52, Thomas Preudhomme wrote: > Hi, > > When using a callee-saved register to save the frame pointer the Thumb-1 prologue fails to save the callee-saved register before that. For ARM and Thumb-2 targets the frame pointer is handled as a special case but nothing is done for > Thumb-1 targets. This patch adds the same logic for Thumb-1 targets. > > ChangeLog entries are as follow: > > *** gcc/ChangeLog *** > > 2016-11-02 Thomas Preud'homme <thomas.preudhomme@arm.com> > > PR target/77904 > * config/arm/arm.c (thumb1_compute_save_reg_mask): mark frame pointer > in save register mask if it is needed. > s/mark/Mark/ > > *** gcc/testsuite/ChangeLog *** > > 2016-11-02 Thomas Preud'homme <thomas.preudhomme@arm.com> > > PR target/77904 > * gcc.target/arm/pr77904.c: New test. > > > Testing: Testsuite shows no regression when run with arm-none-eabi GCC cross-compiler for Cortex-M0 target. > > Is this ok for trunk? > I'd ask for a bootstrap, but this code is Thumb-1 only so it wouldn't affect anything. Can you just double-check that the new test passes on non-Thumb-1 configurations as well? Ok for trunk. Thanks, Kyrill > Best regards, > > Thomas
On 16/11/16 10:30, Kyrill Tkachov wrote: > Hi Thomas, > > On 03/11/16 16:52, Thomas Preudhomme wrote: >> Hi, >> >> When using a callee-saved register to save the frame pointer the Thumb-1 >> prologue fails to save the callee-saved register before that. For ARM and >> Thumb-2 targets the frame pointer is handled as a special case but nothing is >> done for Thumb-1 targets. This patch adds the same logic for Thumb-1 targets. >> >> ChangeLog entries are as follow: >> >> *** gcc/ChangeLog *** >> >> 2016-11-02 Thomas Preud'homme <thomas.preudhomme@arm.com> >> >> PR target/77904 >> * config/arm/arm.c (thumb1_compute_save_reg_mask): mark frame pointer >> in save register mask if it is needed. >> > > s/mark/Mark/ > >> >> *** gcc/testsuite/ChangeLog *** >> >> 2016-11-02 Thomas Preud'homme <thomas.preudhomme@arm.com> >> >> PR target/77904 >> * gcc.target/arm/pr77904.c: New test. >> >> >> Testing: Testsuite shows no regression when run with arm-none-eabi GCC >> cross-compiler for Cortex-M0 target. >> >> Is this ok for trunk? >> > > I'd ask for a bootstrap, but this code is Thumb-1 only so it wouldn't affect > anything. I can bootstrap for armv4t with --with-mode=thumb which would at least exercise the path. I'll try such a bootstrap on qemu. > Can you just double-check that the new test passes on non-Thumb-1 configurations > as well? It works well for ARMv7-A in ARM and Thumb mode. Best regards, Thomas
On 17/11/16 08:56, Thomas Preudhomme wrote: > On 16/11/16 10:30, Kyrill Tkachov wrote: >> Hi Thomas, >> >> On 03/11/16 16:52, Thomas Preudhomme wrote: >>> Hi, >>> >>> When using a callee-saved register to save the frame pointer the Thumb-1 >>> prologue fails to save the callee-saved register before that. For ARM and >>> Thumb-2 targets the frame pointer is handled as a special case but nothing is >>> done for Thumb-1 targets. This patch adds the same logic for Thumb-1 targets. >>> >>> ChangeLog entries are as follow: >>> >>> *** gcc/ChangeLog *** >>> >>> 2016-11-02 Thomas Preud'homme <thomas.preudhomme@arm.com> >>> >>> PR target/77904 >>> * config/arm/arm.c (thumb1_compute_save_reg_mask): mark frame pointer >>> in save register mask if it is needed. >>> >> >> s/mark/Mark/ >> >>> >>> *** gcc/testsuite/ChangeLog *** >>> >>> 2016-11-02 Thomas Preud'homme <thomas.preudhomme@arm.com> >>> >>> PR target/77904 >>> * gcc.target/arm/pr77904.c: New test. >>> >>> >>> Testing: Testsuite shows no regression when run with arm-none-eabi GCC >>> cross-compiler for Cortex-M0 target. >>> >>> Is this ok for trunk? >>> >> >> I'd ask for a bootstrap, but this code is Thumb-1 only so it wouldn't affect >> anything. > > I can bootstrap for armv4t with --with-mode=thumb which would at least exercise the path. I'll try such a bootstrap on qemu. > If you can get it to work, then yes please. >> Can you just double-check that the new test passes on non-Thumb-1 configurations >> as well? > > It works well for ARMv7-A in ARM and Thumb mode. > Great, thanks again. Kyrill > Best regards, > > Thomas
On 17/11/16 09:11, Kyrill Tkachov wrote: > > On 17/11/16 08:56, Thomas Preudhomme wrote: >> On 16/11/16 10:30, Kyrill Tkachov wrote: >>> Hi Thomas, >>> >>> On 03/11/16 16:52, Thomas Preudhomme wrote: >>>> Hi, >>>> >>>> When using a callee-saved register to save the frame pointer the Thumb-1 >>>> prologue fails to save the callee-saved register before that. For ARM and >>>> Thumb-2 targets the frame pointer is handled as a special case but nothing is >>>> done for Thumb-1 targets. This patch adds the same logic for Thumb-1 targets. >>>> >>>> ChangeLog entries are as follow: >>>> >>>> *** gcc/ChangeLog *** >>>> >>>> 2016-11-02 Thomas Preud'homme <thomas.preudhomme@arm.com> >>>> >>>> PR target/77904 >>>> * config/arm/arm.c (thumb1_compute_save_reg_mask): mark frame pointer >>>> in save register mask if it is needed. >>>> >>> >>> s/mark/Mark/ >>> >>>> >>>> *** gcc/testsuite/ChangeLog *** >>>> >>>> 2016-11-02 Thomas Preud'homme <thomas.preudhomme@arm.com> >>>> >>>> PR target/77904 >>>> * gcc.target/arm/pr77904.c: New test. >>>> >>>> >>>> Testing: Testsuite shows no regression when run with arm-none-eabi GCC >>>> cross-compiler for Cortex-M0 target. >>>> >>>> Is this ok for trunk? >>>> >>> >>> I'd ask for a bootstrap, but this code is Thumb-1 only so it wouldn't affect >>> anything. >> >> I can bootstrap for armv4t with --with-mode=thumb which would at least >> exercise the path. I'll try such a bootstrap on qemu. >> > > If you can get it to work, then yes please. Bootstrap came back clean so I've committed the patch (r242693). Thanks! Best regards, Thomas
diff --git a/gcc/config/arm/arm.c b/gcc/config/arm/arm.c index dd8d5e5db8ca50daab648e58df290969aa794862..c7bf3320a3db5dfc4f33ae145ff2e5f239d6c0f9 100644 --- a/gcc/config/arm/arm.c +++ b/gcc/config/arm/arm.c @@ -19495,6 +19495,10 @@ thumb1_compute_save_reg_mask (void) if (df_regs_ever_live_p (reg) && callee_saved_reg_p (reg)) mask |= 1 << reg; + /* Handle the frame pointer as a special case. */ + if (frame_pointer_needed) + mask |= 1 << HARD_FRAME_POINTER_REGNUM; + if (flag_pic && !TARGET_SINGLE_PIC_BASE && arm_pic_register != INVALID_REGNUM diff --git a/gcc/testsuite/gcc.target/arm/pr77904.c b/gcc/testsuite/gcc.target/arm/pr77904.c new file mode 100644 index 0000000000000000000000000000000000000000..76728c07e73350ce44160cabff3dd2fa7a6ef021 --- /dev/null +++ b/gcc/testsuite/gcc.target/arm/pr77904.c @@ -0,0 +1,45 @@ +/* { dg-do run } */ +/* { dg-options "-O2" } */ + +__attribute__ ((noinline, noclone)) void +clobber_sp (void) +{ + __asm volatile ("" : : : "sp"); +} + +int +main (void) +{ + int ret; + + __asm volatile ("mov\tr4, #0xf4\n\t" + "mov\tr5, #0xf5\n\t" + "mov\tr6, #0xf6\n\t" + "mov\tr7, #0xf7\n\t" + "mov\tr0, #0xf8\n\t" + "mov\tr8, r0\n\t" + "mov\tr0, #0xfa\n\t" + "mov\tr10, r0" + : : : "r0", "r4", "r5", "r6", "r7", "r8", "r10"); + clobber_sp (); + + __asm volatile ("cmp\tr4, #0xf4\n\t" + "bne\tfail\n\t" + "cmp\tr5, #0xf5\n\t" + "bne\tfail\n\t" + "cmp\tr6, #0xf6\n\t" + "bne\tfail\n\t" + "cmp\tr7, #0xf7\n\t" + "bne\tfail\n\t" + "mov\tr0, r8\n\t" + "cmp\tr0, #0xf8\n\t" + "bne\tfail\n\t" + "mov\tr0, r10\n\t" + "cmp\tr0, #0xfa\n\t" + "bne\tfail\n\t" + "mov\t%0, #1\n" + "fail:\n\t" + "sub\tr0, #1" + : "=r" (ret) : :); + return ret; +}
Hi, When using a callee-saved register to save the frame pointer the Thumb-1 prologue fails to save the callee-saved register before that. For ARM and Thumb-2 targets the frame pointer is handled as a special case but nothing is done for Thumb-1 targets. This patch adds the same logic for Thumb-1 targets. ChangeLog entries are as follow: *** gcc/ChangeLog *** 2016-11-02 Thomas Preud'homme <thomas.preudhomme@arm.com> PR target/77904 * config/arm/arm.c (thumb1_compute_save_reg_mask): mark frame pointer in save register mask if it is needed. *** gcc/testsuite/ChangeLog *** 2016-11-02 Thomas Preud'homme <thomas.preudhomme@arm.com> PR target/77904 * gcc.target/arm/pr77904.c: New test. Testing: Testsuite shows no regression when run with arm-none-eabi GCC cross-compiler for Cortex-M0 target. Is this ok for trunk? Best regards, Thomas