@@ -26,13 +26,13 @@ BR2_TARGET_UBOOT_BOARDNAME="nitrogen6sx"
BR2_TARGET_UBOOT_FORMAT_IMX=y
BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
# Last version of branch boundary-v2016.03
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/12f31130.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/1ac27109.tar.gz"
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
# Last version of branch boundary-imx_4.1.15_1.0.0_ga
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/be36042a.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/207addbe.tar.gz"
BR2_LINUX_KERNEL_DEFCONFIG="boundary"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -26,13 +26,13 @@ BR2_TARGET_UBOOT_BOARDNAME="nitrogen6q"
BR2_TARGET_UBOOT_FORMAT_IMX=y
BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
# Last version of branch boundary-v2016.03
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/12f31130.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/1ac27109.tar.gz"
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
# Last version of branch boundary-imx_4.1.15_1.0.0_ga
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/be36042a.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/207addbe.tar.gz"
BR2_LINUX_KERNEL_DEFCONFIG="boundary"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -25,13 +25,13 @@ BR2_TARGET_UBOOT_BOARDNAME="nitrogen7"
BR2_TARGET_UBOOT_FORMAT_IMX=y
BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
# Last version of branch boundary-v2016.03
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/12f31130.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/1ac27109.tar.gz"
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
# Last version of branch boundary-imx_4.1.15_1.0.0_ga
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/be36042a.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/207addbe.tar.gz"
BR2_LINUX_KERNEL_DEFCONFIG="boundary"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
Here are the main U-Boot modifications: - Add Spansion flash support - Add secure boot (HAB) support Here are the main Linux modifications: - Add HDMI2CSI 75Hz support - Add KD024FM display support - Fix PCIe reset gpios in device tree - Backport xhci fixes from mainline - Fix SOM PHY address bug - Enable IPU Prefetch engine for 6QP - Fix ft5x06 touch bug Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> --- Hi all, This revision bump is mainly due to the touch driver issue fix that is needed by several customers. Also the IPU prefetch configuration for 6QP devices was missing, will increase performances. Regards, Gary --- configs/nitrogen6sx_defconfig | 4 ++-- configs/nitrogen6x_defconfig | 4 ++-- configs/nitrogen7_defconfig | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-)