@@ -23,14 +23,14 @@ BR2_TARGET_UBOOT_BOARDNAME="nitrogen6sx"
BR2_TARGET_UBOOT_FORMAT_IMX=y
BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
# Last version of branch boundary-v2016.03
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/ed95621f.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/12f31130.tar.gz"
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
# Last version of branch boundary-imx_4.1.15_1.0.0_ga
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/8a73de91.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/be36042a.tar.gz"
BR2_LINUX_KERNEL_DEFCONFIG="boundary"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-nitrogen6sx"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-nitrogen6sx imx6sx-nitrogen6sx-m4"
@@ -23,13 +23,13 @@ BR2_TARGET_UBOOT_BOARDNAME="nitrogen6q"
BR2_TARGET_UBOOT_FORMAT_IMX=y
BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
# Last version of branch boundary-v2016.03
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/ed95621f.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/12f31130.tar.gz"
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
# Last version of branch boundary-imx_4.1.15_1.0.0_ga
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/8a73de91.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/be36042a.tar.gz"
BR2_LINUX_KERNEL_DEFCONFIG="boundary"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -24,14 +24,14 @@ BR2_TARGET_UBOOT_BOARDNAME="nitrogen7"
BR2_TARGET_UBOOT_FORMAT_IMX=y
BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
# Last version of branch boundary-v2016.03
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/ed95621f.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/12f31130.tar.gz"
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
# Last version of branch boundary-imx_4.1.15_1.0.0_ga
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/8a73de91.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/be36042a.tar.gz"
BR2_LINUX_KERNEL_DEFCONFIG="boundary"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx7d-nitrogen7"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx7d-nitrogen7 imx7d-nitrogen7-m4"
Also adding the '-m4' device tree blobs which allow to disable the peripherals that are used by the Cortex-M4. The 6x_bootscript is already setup to load the '-m4' dtb if m4enabled u-boot variable is set to 1. The FreeRTOS BSP for both Nitrogen6SX and Nitrogen7 can be found here: https://github.com/boundarydevices/freertos-boundary Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> --- Hi all, Sorry I just bumped the kernel to 4.1.15 and U-Boot to v2016.03 last week but a request has been made to support the Cortex-M4 of the i.MX6SoloX and the i.MX7D (based on the same 4.1.15/2016.03 versions). The differences between the previous version and this one are: - Updated U-Boot default environment to be able to flash, load and boot a M4 firmware on our boards - Updated U-Boot defconfig to include 'bootaux' command and RDC control - Updated device trees to disable peripherals used by the MCU The Nitrogen6x defconfig didn't need to be updated since i.MX6Q/DL do not have a Cortex-M4, but its version was bumped to be consistent with the other two. Regards, Gary --- configs/nitrogen6sx_defconfig | 6 +++--- configs/nitrogen6x_defconfig | 4 ++-- configs/nitrogen7_defconfig | 6 +++--- 3 files changed, 8 insertions(+), 8 deletions(-)