| Message ID | 1467862574-6522-2-git-send-email-f.fainelli@gmail.com |
|---|---|
| State | New |
| Headers | show |
On Wednesday, July 6, 2016 8:36:11 PM CEST Florian Fainelli wrote: > This pull request contains the second part of the Broadcom ARM64-based SoCs > changes for 4.8. Please note that this pull request contains changes from the > ARM 32-bits port and ARM 64-bits port as well: Ok, looks reasonable. > - Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with > their proper information about the on-board USB Ethernet adapter so there is > appropriate binding between this USB device and a device_node (useful for MAC > address fetching and stuff), this commit is also present for the ARM DT pull > request > > - Eric adds support for the Raspberry Pi 3 aka BCM2837 and provides the binding > information and the basic SoC DT include file required to boot to a prompt > > - Gerd updates the Raspberry Pi 3 DT with Ethernet information based on the > earlier change from Lubomir Pulled into next/dt64, thanks! Arnd
The following changes since commit 5dcc9c7618dff61de243ca9bbac7de18ef92f49b: arm64: dts: NS2: Add CCI-400 PMU support (2016-05-31 11:00:28 -0700) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.8/devicetree-arm64-part2 for you to fetch changes up to b2aa1bb2be9c9cf4727ddb81ae1d0ad5a0c683a8: Merge tag 'bcm2835-dt-64-next-2016-07-03' into devicetree-arm64/next (2016-07-05 20:47:49 -0700) ---------------------------------------------------------------- This pull request contains the second part of the Broadcom ARM64-based SoCs changes for 4.8. Please note that this pull request contains changes from the ARM 32-bits port and ARM 64-bits port as well: - Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with their proper information about the on-board USB Ethernet adapter so there is appropriate binding between this USB device and a device_node (useful for MAC address fetching and stuff), this commit is also present for the ARM DT pull request - Eric adds support for the Raspberry Pi 3 aka BCM2837 and provides the binding information and the basic SoC DT include file required to boot to a prompt - Gerd updates the Raspberry Pi 3 DT with Ethernet information based on the earlier change from Lubomir ---------------------------------------------------------------- Eric Anholt (3): dt-bindings: Add root properties for Raspberry Pi 3 ARM: bcm2835: Add devicetree for the Raspberry Pi 3. Merge tag 'bcm2835-dt-ethernet' into HEAD Florian Fainelli (1): Merge tag 'bcm2835-dt-64-next-2016-07-03' into devicetree-arm64/next Gerd Hoffmann (1): ARM: bcm2837: dt: Add the ethernet to the device trees Lubomir Rintel (1): ARM: bcm2835: dt: Add the ethernet to the device trees .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 ++ arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 + arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 + arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 19 ++++++ arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 19 ++++++ arch/arm/boot/dts/bcm283x.dtsi | 2 + arch/arm64/boot/dts/broadcom/Makefile | 1 + arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 30 +++++++++ arch/arm64/boot/dts/broadcom/bcm2837.dtsi | 76 ++++++++++++++++++++++ 11 files changed, 155 insertions(+) create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837.dtsi