| Message ID | 20160624143703.13231-1-swarren@wwwdotorg.org |
|---|---|
| State | Accepted |
| Headers | show |
On 24 June 2016 at 08:37, Stephen Warren <swarren@wwwdotorg.org> wrote: > From: Stephen Warren <swarren@nvidia.com> > > On recent SoCs, tegra_pcie_phy_enable() isn't called; but instead > tegra_pcie_enable_controller() calls tegra_xusb_phy_enable(). However, > part of tegra_pcie_phy_enable() needs to happen in all cases. Move that > code to tegra_pcie_port_enable() instead. > > For reference, NVIDIA's downstream Linux kernel performs this operation > in tegra_pcie_enable_rp_features(), which is called immediately after > tegra_pcie_port_enable(). Since that function doesn't exist in the mainline > driver, we'll just add it to the tail of tegra_pcie_port_enable() instead. > > Signed-off-by: Stephen Warren <swarren@nvidia.com> > --- > drivers/pci/host/pci-tegra.c | 17 +++++++++-------- > 1 file changed, 9 insertions(+), 8 deletions(-) Reviewed-by: Simon Glass <sjg@chromium.org> -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 24, 2016 at 08:37:03AM -0600, Stephen Warren wrote: > From: Stephen Warren <swarren@nvidia.com> > > On recent SoCs, tegra_pcie_phy_enable() isn't called; but instead > tegra_pcie_enable_controller() calls tegra_xusb_phy_enable(). However, > part of tegra_pcie_phy_enable() needs to happen in all cases. Move that > code to tegra_pcie_port_enable() instead. > > For reference, NVIDIA's downstream Linux kernel performs this operation > in tegra_pcie_enable_rp_features(), which is called immediately after > tegra_pcie_port_enable(). Since that function doesn't exist in the mainline > driver, we'll just add it to the tail of tegra_pcie_port_enable() instead. > > Signed-off-by: Stephen Warren <swarren@nvidia.com> > --- > drivers/pci/host/pci-tegra.c | 17 +++++++++-------- > 1 file changed, 9 insertions(+), 8 deletions(-) > > diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c > index 74887fedc3d4..2ec64a9e7943 100644 > --- a/drivers/pci/host/pci-tegra.c > +++ b/drivers/pci/host/pci-tegra.c > @@ -541,12 +541,13 @@ static void tegra_pcie_port_reset(struct tegra_pcie_port *port) > > static void tegra_pcie_port_enable(struct tegra_pcie_port *port) > { > - const struct tegra_pcie_soc_data *soc = port->pcie->soc_data; > + struct tegra_pcie *pcie = port->pcie; > + const struct tegra_pcie_soc_data *soc = pcie->soc_data; > unsigned long ctrl = tegra_pcie_port_get_pex_ctrl(port); > unsigned long value; > > /* enable reference clock */ > - value = afi_readl(port->pcie, ctrl); > + value = afi_readl(pcie, ctrl); > value |= AFI_PEX_CTRL_REFCLK_EN; > > if (soc->has_pex_clkreq_en) > @@ -554,9 +555,14 @@ static void tegra_pcie_port_enable(struct tegra_pcie_port *port) > > value |= AFI_PEX_CTRL_OVERRIDE_EN; > > - afi_writel(port->pcie, value, ctrl); > + afi_writel(pcie, value, ctrl); > > tegra_pcie_port_reset(port); > + > + /* Configure the reference clock driver */ > + pads_writel(pcie, soc->pads_refclk_cfg0, PADS_REFCLK_CFG0); > + if (soc->num_ports > 2) > + pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1); > } This will actually write these two registers for each enabled port, which, while it shouldn't make a difference, is unnecessary. I've applied a slightly modified version of this patch. Specifically I moved this code to the tail of the tegra_pcie_phy_power_on() function, which is closest to where it was before. I've also applied the patch that changes the values that are written into this register, though I reversed the order because that made more sense to me. I've pushed both patches to the for-4.8/pci branch in the Tegra tree, can you please take a look if that still looks okay to you? Thierry
On 06/30/2016 07:47 AM, Thierry Reding wrote: > On Fri, Jun 24, 2016 at 08:37:03AM -0600, Stephen Warren wrote: >> From: Stephen Warren <swarren@nvidia.com> >> >> On recent SoCs, tegra_pcie_phy_enable() isn't called; but instead >> tegra_pcie_enable_controller() calls tegra_xusb_phy_enable(). However, >> part of tegra_pcie_phy_enable() needs to happen in all cases. Move that >> code to tegra_pcie_port_enable() instead. >> >> For reference, NVIDIA's downstream Linux kernel performs this operation >> in tegra_pcie_enable_rp_features(), which is called immediately after >> tegra_pcie_port_enable(). Since that function doesn't exist in the mainline >> driver, we'll just add it to the tail of tegra_pcie_port_enable() instead. >> >> Signed-off-by: Stephen Warren <swarren@nvidia.com> >> --- >> drivers/pci/host/pci-tegra.c | 17 +++++++++-------- >> 1 file changed, 9 insertions(+), 8 deletions(-) >> >> diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c >> index 74887fedc3d4..2ec64a9e7943 100644 >> --- a/drivers/pci/host/pci-tegra.c >> +++ b/drivers/pci/host/pci-tegra.c >> @@ -541,12 +541,13 @@ static void tegra_pcie_port_reset(struct tegra_pcie_port *port) >> >> static void tegra_pcie_port_enable(struct tegra_pcie_port *port) >> { >> - const struct tegra_pcie_soc_data *soc = port->pcie->soc_data; >> + struct tegra_pcie *pcie = port->pcie; >> + const struct tegra_pcie_soc_data *soc = pcie->soc_data; >> unsigned long ctrl = tegra_pcie_port_get_pex_ctrl(port); >> unsigned long value; >> >> /* enable reference clock */ >> - value = afi_readl(port->pcie, ctrl); >> + value = afi_readl(pcie, ctrl); >> value |= AFI_PEX_CTRL_REFCLK_EN; >> >> if (soc->has_pex_clkreq_en) >> @@ -554,9 +555,14 @@ static void tegra_pcie_port_enable(struct tegra_pcie_port *port) >> >> value |= AFI_PEX_CTRL_OVERRIDE_EN; >> >> - afi_writel(port->pcie, value, ctrl); >> + afi_writel(pcie, value, ctrl); >> >> tegra_pcie_port_reset(port); >> + >> + /* Configure the reference clock driver */ >> + pads_writel(pcie, soc->pads_refclk_cfg0, PADS_REFCLK_CFG0); >> + if (soc->num_ports > 2) >> + pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1); >> } > > This will actually write these two registers for each enabled port, > which, while it shouldn't make a difference, is unnecessary. I've > applied a slightly modified version of this patch. Specifically I moved > this code to the tail of the tegra_pcie_phy_power_on() function, which > is closest to where it was before. > > I've also applied the patch that changes the values that are written > into this register, though I reversed the order because that made more > sense to me. I've pushed both patches to the for-4.8/pci branch in the > Tegra tree, can you please take a look if that still looks okay to you? I think that will work. It's a pity the code location in the mainline kernel is going to diverge from the downstream kernel and U-Boot though. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c index 74887fedc3d4..2ec64a9e7943 100644 --- a/drivers/pci/host/pci-tegra.c +++ b/drivers/pci/host/pci-tegra.c @@ -541,12 +541,13 @@ static void tegra_pcie_port_reset(struct tegra_pcie_port *port) static void tegra_pcie_port_enable(struct tegra_pcie_port *port) { - const struct tegra_pcie_soc_data *soc = port->pcie->soc_data; + struct tegra_pcie *pcie = port->pcie; + const struct tegra_pcie_soc_data *soc = pcie->soc_data; unsigned long ctrl = tegra_pcie_port_get_pex_ctrl(port); unsigned long value; /* enable reference clock */ - value = afi_readl(port->pcie, ctrl); + value = afi_readl(pcie, ctrl); value |= AFI_PEX_CTRL_REFCLK_EN; if (soc->has_pex_clkreq_en) @@ -554,9 +555,14 @@ static void tegra_pcie_port_enable(struct tegra_pcie_port *port) value |= AFI_PEX_CTRL_OVERRIDE_EN; - afi_writel(port->pcie, value, ctrl); + afi_writel(pcie, value, ctrl); tegra_pcie_port_reset(port); + + /* Configure the reference clock driver */ + pads_writel(pcie, soc->pads_refclk_cfg0, PADS_REFCLK_CFG0); + if (soc->num_ports > 2) + pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1); } static void tegra_pcie_port_disable(struct tegra_pcie_port *port) @@ -831,11 +837,6 @@ static int tegra_pcie_phy_enable(struct tegra_pcie *pcie) value |= PADS_PLL_CTL_RST_B4SM; pads_writel(pcie, value, soc->pads_pll_ctl); - /* Configure the reference clock driver */ - pads_writel(pcie, soc->pads_refclk_cfg0, PADS_REFCLK_CFG0); - if (soc->num_ports > 2) - pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1); - /* wait for the PLL to lock */ err = tegra_pcie_pll_wait(pcie, 500); if (err < 0) {