diff mbox

[v3,6/6] Documentation: dt: mtd: gpmi: document the new supported chip in DT

Message ID 1466804411-19874-7-git-send-email-han.xu@nxp.com
State Changes Requested
Headers show

Commit Message

Han Xu June 24, 2016, 9:40 p.m. UTC 
listed all supported chips in DT.

Signed-off-by: Han Xu <han.xu@nxp.com>
---
 Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Rob Herring (Arm) June 28, 2016, 8:55 p.m. UTC | #1 
On Fri, Jun 24, 2016 at 04:40:11PM -0500, Han Xu wrote:
> listed all supported chips in DT.
> 
> Signed-off-by: Han Xu <han.xu@nxp.com>
> ---
>  Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index a2fd034..4997a00 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -4,7 +4,8 @@  The GPMI nand controller provides an interface to control the
 NAND flash chips.
 
 Required properties:
-  - compatible : should be "fsl,<chip>-gpmi-nand"
+  - compatible : should be "fsl,<chip>-gpmi-nand", the chip should be imx23,
+    imx28, imx6q, imx6qp, imx6sx, imx6ul or imx7d.
   - reg : should contain registers location and length for gpmi and bch.
   - reg-names: Should contain the reg names "gpmi-nand" and "bch"
   - interrupts : BCH interrupt number.