Message ID | 1466351099-22282-1-git-send-email-andriy.shevchenko@linux.intel.com |
---|---|
State | New |
Headers | show |
On Sun, 2016-06-19 at 18:44 +0300, Andy Shevchenko wrote: > This driver adds pinctrl support for Intel Merrifield. The IP block > which is > called Family-Level Interface Shim is a separate entity in SoC. The > GPIO driver > (gpio-intel-mid.c) will be updated accordingly to support pinctrl > interface. Please review it, but do not apply. There are things have to be addressed: - the pin names are for internal use, although they are public - the relation with GPIO is not done correctly (missed direction setup and some bits in GPIO request) - more pin groups would be added - should go in a series with GPIO updates and platform code - Mika's tag is essential > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > --- > drivers/pinctrl/intel/Kconfig | 11 + > drivers/pinctrl/intel/Makefile | 1 + > drivers/pinctrl/intel/pinctrl-merrifield.c | 908 > +++++++++++++++++++++++++++++ > 3 files changed, 920 insertions(+) > create mode 100644 drivers/pinctrl/intel/pinctrl-merrifield.c > > diff --git a/drivers/pinctrl/intel/Kconfig > b/drivers/pinctrl/intel/Kconfig > index 1c74e03..7ad5901 100644 > --- a/drivers/pinctrl/intel/Kconfig > +++ b/drivers/pinctrl/intel/Kconfig > @@ -29,6 +29,17 @@ config PINCTRL_CHERRYVIEW > Cherryview/Braswell pinctrl driver provides an interface > that > allows configuring of SoC pins and using them as GPIOs. > > +config PINCTRL_MERRIFIELD > + tristate "Intel Merrifield FLIS driver" > + depends on X86_INTEL_MID > + select PINMUX > + select PINCONF > + select GENERIC_PINCONF > + help > + Merrifield Family-Level Interface Shim (FLIS) driver > provides an > + interface that allows configuring of SoC pins and using > them as > + GPIOs. > + > config PINCTRL_INTEL > tristate > select PINMUX > diff --git a/drivers/pinctrl/intel/Makefile > b/drivers/pinctrl/intel/Makefile > index 03bc68e..3080307 100644 > --- a/drivers/pinctrl/intel/Makefile > +++ b/drivers/pinctrl/intel/Makefile > @@ -2,6 +2,7 @@ > > obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o > obj-$(CONFIG_PINCTRL_CHERRYVIEW) += pinctrl-cherryview.o > +obj-$(CONFIG_PINCTRL_MERRIFIELD) += pinctrl-merrifield.o > obj-$(CONFIG_PINCTRL_INTEL) += pinctrl-intel.o > obj-$(CONFIG_PINCTRL_BROXTON) += pinctrl-broxton.o > obj-$(CONFIG_PINCTRL_SUNRISEPOINT) += pinctrl-sunrisepoint.o > diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c > b/drivers/pinctrl/intel/pinctrl-merrifield.c > new file mode 100644 > index 0000000..b49af3b > --- /dev/null > +++ b/drivers/pinctrl/intel/pinctrl-merrifield.c > @@ -0,0 +1,908 @@ > +/* > + * Intel Merrifield SoC Family-Level Interface Shim (FLIS) driver > + * > + * Copyright (C) 2016, Intel Corporation > + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > + * > + * This program is free software; you can redistribute it and/or > modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/bitops.h> > +#include <linux/err.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/pinctrl/pinconf.h> > +#include <linux/pinctrl/pinconf-generic.h> > +#include <linux/pinctrl/pinctrl.h> > +#include <linux/pinctrl/pinmux.h> > + > +#include "pinctrl-intel.h" > + > +#define MRFLD_FAMILY_NR 64 > +#define MRFLD_FAMILY_LEN 0x400 > + > +#define SLEW_OFFSET 0x000 > +#define BUFCFG_OFFSET 0x100 > +#define MISC_OFFSET 0x300 > + > +#define BUFCFG_PINMODE_SHIFT 0 > +#define BUFCFG_PINMODE_MASK GENMASK(2, 0) > +#define BUFCFG_PUPD_VAL_SHIFT 4 > +#define BUFCFG_PUPD_VAL_MASK GENMASK(5, 4) > +#define BUFCFG_PUPD_VAL_2K 0 > +#define BUFCFG_PUPD_VAL_20K 1 > +#define BUFCFG_PUPD_VAL_50K 2 > +#define BUFCFG_PUPD_VAL_910 3 > +#define BUFCFG_PU_EN BIT(8) > +#define BUFCFG_PD_EN BIT(9) > +#define BUFCFG_OD_EN BIT(21) > + > +/** > + * struct mrfld_family - Intel pin family description > + * @barno: MMIO BAR number where registers for this family reside > + * @pin_base: Starting pin of pins in this family > + * @npins: Number of pins in this family > + * @protected: True if family is protected by access > + * @regs: family specific common registers > + */ > +struct mrfld_family { > + unsigned barno; > + unsigned pin_base; > + size_t npins; > + bool protected; > + void __iomem *regs; > +}; > + > +#define MRFLD_FAMILY(b, s, e) \ > + { \ > + .barno = (b), \ > + .pin_base = (s), \ > + .npins = (e) - (s) + 1, \ > + } > + > +#define MRFLD_FAMILY_PROTECTED(b, s, e) \ > + { \ > + .barno = (b), \ > + .pin_base = (s), \ > + .npins = (e) - (s) + 1, \ > + .protected = true, \ > + } > + > +static const struct pinctrl_pin_desc mrfld_pins[] = { > + /* Family 0: OCP2SSC (0 pins) */ > + /* Family 1: ULPI (13 pins) */ > + PINCTRL_PIN(0, "USB_ULPI_0_CLK"), > + PINCTRL_PIN(1, "USB_ULPI_0_DATA_0"), > + PINCTRL_PIN(2, "USB_ULPI_0_DATA_1"), > + PINCTRL_PIN(3, "USB_ULPI_0_DATA_2"), > + PINCTRL_PIN(4, "USB_ULPI_0_DATA_3"), > + PINCTRL_PIN(5, "USB_ULPI_0_DATA_4"), > + PINCTRL_PIN(6, "USB_ULPI_0_DATA_5"), > + PINCTRL_PIN(7, "USB_ULPI_0_DATA_6"), > + PINCTRL_PIN(8, "USB_ULPI_0_DATA_7"), > + PINCTRL_PIN(9, "USB_ULPI_0_DIR"), > + PINCTRL_PIN(10, "USB_ULPI_0_NXT"), > + PINCTRL_PIN(11, "USB_ULPI_0_REFCLK"), > + PINCTRL_PIN(12, "USB_ULPI_0_STP"), > + /* Family 2: eMMC (24 pins) */ > + PINCTRL_PIN(13, "EMMC_0_CLK"), > + PINCTRL_PIN(14, "EMMC_0_CMD"), > + PINCTRL_PIN(15, "EMMC_0_D_0"), > + PINCTRL_PIN(16, "EMMC_0_D_1"), > + PINCTRL_PIN(17, "EMMC_0_D_2"), > + PINCTRL_PIN(18, "EMMC_0_D_3"), > + PINCTRL_PIN(19, "EMMC_0_D_4"), > + PINCTRL_PIN(20, "EMMC_0_D_5"), > + PINCTRL_PIN(21, "EMMC_0_D_6"), > + PINCTRL_PIN(22, "EMMC_0_D_7"), > + PINCTRL_PIN(23, "EMMC_0_RST_B"), > + PINCTRL_PIN(24, "GP_EMMC_1_CLK"), > + PINCTRL_PIN(25, "GP_EMMC_1_CMD"), > + PINCTRL_PIN(26, "GP_EMMC_1_D_0"), > + PINCTRL_PIN(27, "GP_EMMC_1_D_1"), > + PINCTRL_PIN(28, "GP_EMMC_1_D_2"), > + PINCTRL_PIN(29, "GP_EMMC_1_D_3"), > + PINCTRL_PIN(30, "GP_EMMC_1_D_4"), > + PINCTRL_PIN(31, "GP_EMMC_1_D_5"), > + PINCTRL_PIN(32, "GP_EMMC_1_D_6"), > + PINCTRL_PIN(33, "GP_EMMC_1_D_7"), > + PINCTRL_PIN(34, "GP_EMMC_1_RST_B"), > + PINCTRL_PIN(35, "GP_28"), > + PINCTRL_PIN(36, "GP_29"), > + /* Family 3: SDIO (20 pins) */ > + PINCTRL_PIN(37, "GP_SDIO_0_CD_B"), > + PINCTRL_PIN(38, "GP_SDIO_0_CLK"), > + PINCTRL_PIN(39, "GP_SDIO_0_CMD"), > + PINCTRL_PIN(40, "GP_SDIO_0_DAT_0"), > + PINCTRL_PIN(41, "GP_SDIO_0_DAT_1"), > + PINCTRL_PIN(42, "GP_SDIO_0_DAT_2"), > + PINCTRL_PIN(43, "GP_SDIO_0_DAT_3"), > + PINCTRL_PIN(44, "GP_SDIO_0_LVL_CLK_FB"), > + PINCTRL_PIN(45, "GP_SDIO_0_LVL_CMD_DIR"), > + PINCTRL_PIN(46, "GP_SDIO_0_LVL_DAT_DIR"), > + PINCTRL_PIN(47, "GP_SDIO_0_LVL_SEL"), > + PINCTRL_PIN(48, "GP_SDIO_0_POWERDOWN_B"), > + PINCTRL_PIN(49, "GP_SDIO_0_WP"), > + PINCTRL_PIN(50, "GP_SDIO_1_CLK"), > + PINCTRL_PIN(51, "GP_SDIO_1_CMD"), > + PINCTRL_PIN(52, "GP_SDIO_1_DAT_0"), > + PINCTRL_PIN(53, "GP_SDIO_1_DAT_1"), > + PINCTRL_PIN(54, "GP_SDIO_1_DAT_2"), > + PINCTRL_PIN(55, "GP_SDIO_1_DAT_3"), > + PINCTRL_PIN(56, "GP_SDIO_1_POWERDOWN_B"), > + /* Family 4: HSI (8 pins) */ > + PINCTRL_PIN(57, "MHSI_ACDATA"), > + PINCTRL_PIN(58, "MHSI_ACFLAG"), > + PINCTRL_PIN(59, "MHSI_ACREADY"), > + PINCTRL_PIN(60, "MHSI_ACWAKE"), > + PINCTRL_PIN(61, "MHSI_CADATA"), > + PINCTRL_PIN(62, "MHSI_CAFLAG"), > + PINCTRL_PIN(63, "MHSI_CAREADY"), > + PINCTRL_PIN(64, "MHSI_CAWAKE"), > + /* Family 5: SSP Audio (14 pins) */ > + PINCTRL_PIN(65, "GP_MSLIM_0_BCLK"), > + PINCTRL_PIN(66, "GP_MSLIM_0_BDAT"), > + PINCTRL_PIN(67, "GP_SSP_0_CLK"), > + PINCTRL_PIN(68, "GP_SSP_0_FS"), > + PINCTRL_PIN(69, "GP_SSP_0_RXD"), > + PINCTRL_PIN(70, "GP_SSP_0_TXD"), > + PINCTRL_PIN(71, "GP_SSP_1_CLK"), > + PINCTRL_PIN(72, "GP_SSP_1_FS"), > + PINCTRL_PIN(73, "GP_SSP_1_RXD"), > + PINCTRL_PIN(74, "GP_SSP_1_TXD"), > + PINCTRL_PIN(75, "GP_SSP_2_CLK"), > + PINCTRL_PIN(76, "GP_SSP_2_FS"), > + PINCTRL_PIN(77, "GP_SSP_2_RXD"), > + PINCTRL_PIN(78, "GP_SSP_2_TXD"), > + /* Family 6: GP SSP (22 pins) */ > + PINCTRL_PIN(79, "GP_SSP_3_CLK"), > + PINCTRL_PIN(80, "GP_SSP_3_FS"), > + PINCTRL_PIN(81, "GP_SSP_3_RXD"), > + PINCTRL_PIN(82, "GP_SSP_3_TXD"), > + PINCTRL_PIN(83, "GP_SSP_4_CLK"), > + PINCTRL_PIN(84, "GP_SSP_4_FS_0"), > + PINCTRL_PIN(85, "GP_SSP_4_FS_1"), > + PINCTRL_PIN(86, "GP_SSP_4_FS_2"), > + PINCTRL_PIN(87, "GP_SSP_4_FS_3"), > + PINCTRL_PIN(88, "GP_SSP_4_RXD"), > + PINCTRL_PIN(89, "GP_SSP_4_TXD"), > + PINCTRL_PIN(90, "GP_SSP_5_CLK"), > + PINCTRL_PIN(91, "GP_SSP_5_FS_0"), > + PINCTRL_PIN(92, "GP_SSP_5_FS_1"), > + PINCTRL_PIN(93, "GP_SSP_5_FS_2"), > + PINCTRL_PIN(94, "GP_SSP_5_FS_3"), > + PINCTRL_PIN(95, "GP_SSP_5_RXD"), > + PINCTRL_PIN(96, "GP_SSP_5_TXD"), > + PINCTRL_PIN(97, "GP_SSP_6_CLK"), > + PINCTRL_PIN(98, "GP_SSP_6_FS"), > + PINCTRL_PIN(99, "GP_SSP_6_RXD"), > + PINCTRL_PIN(100, "GP_SSP_6_TXD"), > + /* Family 7: I2C (14 pins) */ > + PINCTRL_PIN(101, "GP_I2C_1_SCL"), > + PINCTRL_PIN(102, "GP_I2C_1_SDA"), > + PINCTRL_PIN(103, "GP_I2C_2_SCL"), > + PINCTRL_PIN(104, "GP_I2C_2_SDA"), > + PINCTRL_PIN(105, "GP_I2C_3_SCL"), > + PINCTRL_PIN(106, "GP_I2C_3_SDA"), > + PINCTRL_PIN(107, "GP_I2C_4_SCL"), > + PINCTRL_PIN(108, "GP_I2C_4_SDA"), > + PINCTRL_PIN(109, "GP_I2C_5_SCL"), > + PINCTRL_PIN(110, "GP_I2C_5_SDA"), > + PINCTRL_PIN(111, "GP_I2C_6_SCL"), > + PINCTRL_PIN(112, "GP_I2C_6_SDA"), > + PINCTRL_PIN(113, "GP_I2C_7_SCL"), > + PINCTRL_PIN(114, "GP_I2C_7_SDA"), > + /* Family 8: UART (12 pins) */ > + PINCTRL_PIN(115, "GP_UART_0_CTS"), > + PINCTRL_PIN(116, "GP_UART_0_RTS"), > + PINCTRL_PIN(117, "GP_UART_0_RX"), > + PINCTRL_PIN(118, "GP_UART_0_TX"), > + PINCTRL_PIN(119, "GP_UART_1_CTS"), > + PINCTRL_PIN(120, "GP_UART_1_RTS"), > + PINCTRL_PIN(121, "GP_UART_1_RX"), > + PINCTRL_PIN(122, "GP_UART_1_TX"), > + PINCTRL_PIN(123, "GP_UART_2_CTS"), > + PINCTRL_PIN(124, "GP_UART_2_RTS"), > + PINCTRL_PIN(125, "GP_UART_2_RX"), > + PINCTRL_PIN(126, "GP_UART_2_TX"), > + /* Family 9: GPIO South (19 pins) */ > + PINCTRL_PIN(127, "GP_13"), > + PINCTRL_PIN(128, "GP_14"), > + PINCTRL_PIN(129, "GP_15"), > + PINCTRL_PIN(130, "GP_16"), > + PINCTRL_PIN(131, "GP_17"), > + PINCTRL_PIN(132, "GP_18"), > + PINCTRL_PIN(133, "GP_19"), > + PINCTRL_PIN(134, "GP_20"), > + PINCTRL_PIN(135, "GP_21"), > + PINCTRL_PIN(136, "GP_22"), > + PINCTRL_PIN(137, "GP_23"), > + PINCTRL_PIN(138, "GP_24"), > + PINCTRL_PIN(139, "GP_25"), > + PINCTRL_PIN(140, "GP_FAST_INT_0"), > + PINCTRL_PIN(141, "GP_FAST_INT_1"), > + PINCTRL_PIN(142, "GP_FAST_INT_2"), > + PINCTRL_PIN(143, "GP_FAST_INT_3"), > + PINCTRL_PIN(144, "GP_PWM_0"), > + PINCTRL_PIN(145, "GP_PWM_1"), > + /* Family 10: Camera Sideband (12 pins) */ > + PINCTRL_PIN(146, "GP_CAMERASB_0"), > + PINCTRL_PIN(147, "GP_CAMERASB_1"), > + PINCTRL_PIN(148, "GP_CAMERASB_2"), > + PINCTRL_PIN(149, "GP_CAMERASB_3"), > + PINCTRL_PIN(150, "GP_CAMERASB_4"), > + PINCTRL_PIN(151, "GP_CAMERASB_5"), > + PINCTRL_PIN(152, "GP_CAMERASB_6"), > + PINCTRL_PIN(153, "GP_CAMERASB_7"), > + PINCTRL_PIN(154, "GP_CAMERASB_8"), > + PINCTRL_PIN(155, "GP_CAMERASB_9"), > + PINCTRL_PIN(156, "GP_CAMERASB_10"), > + PINCTRL_PIN(157, "GP_CAMERASB_11"), > + /* Family 11: Clock (22 pins) */ > + PINCTRL_PIN(158, "GP_CLKPH_0"), > + PINCTRL_PIN(159, "GP_CLKPH_1"), > + PINCTRL_PIN(160, "GP_CLKPH_2"), > + PINCTRL_PIN(161, "GP_CLKPH_3"), > + PINCTRL_PIN(162, "GP_CLKPH_4"), > + PINCTRL_PIN(163, "GP_CLKPH_5"), > + PINCTRL_PIN(164, "GP_HDMI_HPD"), > + PINCTRL_PIN(165, "GP_INTD_DSI_TE1"), > + PINCTRL_PIN(166, "GP_INTD_DSI_TE2"), > + PINCTRL_PIN(167, "OSC_CLK_CTRL_0"), > + PINCTRL_PIN(168, "OSC_CLK_CTRL_1"), > + PINCTRL_PIN(169, "OSC_CLK_OUT_0"), > + PINCTRL_PIN(170, "OSC_CLK_OUT_1"), > + PINCTRL_PIN(171, "OSC_CLK_OUT_2"), > + PINCTRL_PIN(172, "OSC_CLK_OUT_3"), > + PINCTRL_PIN(173, "OSC_CLK_OUT_4"), > + PINCTRL_PIN(174, "RESETOUT_B"), > + PINCTRL_PIN(175, "XXPMODE"), > + PINCTRL_PIN(176, "XXPRDY"), > + PINCTRL_PIN(177, "XXPREQ_B"), > + PINCTRL_PIN(178, "GP_26"), > + PINCTRL_PIN(179, "GP_27"), > + /* Family 12: MSIC (15 pins) */ > + PINCTRL_PIN(180, "I2C_0_SCL"), > + PINCTRL_PIN(181, "I2C_0_SDA"), > + PINCTRL_PIN(182, "IERR_B"), > + PINCTRL_PIN(183, "JTAG_TCKC"), > + PINCTRL_PIN(184, "JTAG_TDIC"), > + PINCTRL_PIN(185, "JTAG_TDOC"), > + PINCTRL_PIN(186, "JTAG_TMSC"), > + PINCTRL_PIN(187, "JTAG_TRST_B"), > + PINCTRL_PIN(188, "PROCHOT_B"), > + PINCTRL_PIN(189, "RTC_CLK"), > + PINCTRL_PIN(190, "SVID_ALERT_B"), > + PINCTRL_PIN(191, "SVID_VCLK"), > + PINCTRL_PIN(192, "SVID_VDIO"), > + PINCTRL_PIN(193, "THERMTRIP_B"), > + PINCTRL_PIN(194, "STANDBY"), > + /* Family 13: Keyboard (20 pins) */ > + PINCTRL_PIN(195, "GP_KBD_DKIN_0"), > + PINCTRL_PIN(196, "GP_KBD_DKIN_1"), > + PINCTRL_PIN(197, "GP_KBD_DKIN_2"), > + PINCTRL_PIN(198, "GP_KBD_DKIN_3"), > + PINCTRL_PIN(199, "GP_KBD_MKIN_0"), > + PINCTRL_PIN(200, "GP_KBD_MKIN_1"), > + PINCTRL_PIN(201, "GP_KBD_MKIN_2"), > + PINCTRL_PIN(202, "GP_KBD_MKIN_3"), > + PINCTRL_PIN(203, "GP_KBD_MKIN_4"), > + PINCTRL_PIN(204, "GP_KBD_MKIN_5"), > + PINCTRL_PIN(205, "GP_KBD_MKIN_6"), > + PINCTRL_PIN(206, "GP_KBD_MKIN_7"), > + PINCTRL_PIN(207, "GP_KBD_MKOUT_0"), > + PINCTRL_PIN(208, "GP_KBD_MKOUT_1"), > + PINCTRL_PIN(209, "GP_KBD_MKOUT_2"), > + PINCTRL_PIN(210, "GP_KBD_MKOUT_3"), > + PINCTRL_PIN(211, "GP_KBD_MKOUT_4"), > + PINCTRL_PIN(212, "GP_KBD_MKOUT_5"), > + PINCTRL_PIN(213, "GP_KBD_MKOUT_6"), > + PINCTRL_PIN(214, "GP_KBD_MKOUT_7"), > + /* Family 14: GPIO North (13 pins) */ > + PINCTRL_PIN(215, "GP_0"), > + PINCTRL_PIN(216, "GP_1"), > + PINCTRL_PIN(217, "GP_2"), > + PINCTRL_PIN(218, "GP_3"), > + PINCTRL_PIN(219, "GP_4"), > + PINCTRL_PIN(220, "GP_5"), > + PINCTRL_PIN(221, "GP_6"), > + PINCTRL_PIN(222, "GP_7"), > + PINCTRL_PIN(223, "GP_8"), > + PINCTRL_PIN(224, "GP_9"), > + PINCTRL_PIN(225, "GP_10"), > + PINCTRL_PIN(226, "GP_11"), > + PINCTRL_PIN(227, "GP_12"), > + /* Family 15: PTI (5 pins) */ > + PINCTRL_PIN(228, "GP_MPTI_CLK"), > + PINCTRL_PIN(229, "GP_MPTI_DATA_0"), > + PINCTRL_PIN(230, "GP_MPTI_DATA_1"), > + PINCTRL_PIN(231, "GP_MPTI_DATA_2"), > + PINCTRL_PIN(232, "GP_MPTI_DATA_3"), > + /* Family 16: USB3 (0 pins) */ > + /* Family 17: HSIC (0 pins) */ > + /* Family 18: Broadcast (0 pins) */ > +}; > + > +static const unsigned mrfld_pwm0_pins[] = { 144 }; > +static const unsigned mrfld_pwm1_pins[] = { 145 }; > +static const unsigned mrfld_pwm2_pins[] = { 132 }; > +static const unsigned mrfld_pwm3_pins[] = { 133 }; > + > +static const struct intel_pingroup mrfld_groups[] = { > + PIN_GROUP("pwm0_grp", mrfld_pwm0_pins, 1), > + PIN_GROUP("pwm1_grp", mrfld_pwm1_pins, 1), > + PIN_GROUP("pwm2_grp", mrfld_pwm2_pins, 1), > + PIN_GROUP("pwm3_grp", mrfld_pwm3_pins, 1), > +}; > + > +static const char * const mrfld_pwm0_groups[] = { "pwm0_grp" }; > +static const char * const mrfld_pwm1_groups[] = { "pwm1_grp" }; > +static const char * const mrfld_pwm2_groups[] = { "pwm2_grp" }; > +static const char * const mrfld_pwm3_groups[] = { "pwm3_grp" }; > + > +static const struct intel_function mrfld_functions[] = { > + FUNCTION("pwm0", mrfld_pwm0_groups), > + FUNCTION("pwm1", mrfld_pwm1_groups), > + FUNCTION("pwm2", mrfld_pwm2_groups), > + FUNCTION("pwm3", mrfld_pwm3_groups), > +}; > + > +static const struct mrfld_family mrfld_families[] = { > + MRFLD_FAMILY(1, 0, 12), > + MRFLD_FAMILY(2, 13, 36), > + MRFLD_FAMILY(3, 37, 56), > + MRFLD_FAMILY(4, 57, 64), > + MRFLD_FAMILY(5, 65, 78), > + MRFLD_FAMILY(6, 79, 100), > + MRFLD_FAMILY(7, 101, 114), > + MRFLD_FAMILY(8, 115, 126), > + MRFLD_FAMILY(9, 127, 145), > + MRFLD_FAMILY(10, 146, 157), > + MRFLD_FAMILY(11, 158, 179), > + MRFLD_FAMILY_PROTECTED(12, 180, 194), > + MRFLD_FAMILY(13, 195, 214), > + MRFLD_FAMILY(14, 215, 227), > + MRFLD_FAMILY(15, 228, 232), > +}; > + > +/** > + * struct mrfld_pinctrl_soc_data - Intel pin controller per-SoC > configuration > + * @name: Name of the family > + * @pins: Array if pins this pinctrl controls > + * @npins: Number of pins in the array > + * @groups: Array of pin groups > + * @ngroups: Number of groups in the array > + * @functions: Array of functions > + * @nfunctions: Number of functions in the array > + * @families: Array of families this pinctrl handles > + * @nfamilies: Number of families in the array > + * > + * The @families is used as a template by the core driver. It will > make > + * copy of all families and fill in rest of the information. > + */ > +struct mrfld_pinctrl_soc_data { > + const char *name; > + const struct pinctrl_pin_desc *pins; > + size_t npins; > + const struct intel_pingroup *groups; > + size_t ngroups; > + const struct intel_function *functions; > + size_t nfunctions; > + const struct mrfld_family *families; > + size_t nfamilies; > +}; > + > +static const struct mrfld_pinctrl_soc_data mrfld_soc_data = { > + .pins = mrfld_pins, > + .npins = ARRAY_SIZE(mrfld_pins), > + .groups = mrfld_groups, > + .ngroups = ARRAY_SIZE(mrfld_groups), > + .functions = mrfld_functions, > + .nfunctions = ARRAY_SIZE(mrfld_functions), > + .families = mrfld_families, > + .nfamilies = ARRAY_SIZE(mrfld_families), > +}; > + > +/** > + * struct mrfld_pinctrl - Intel Merrifield pinctrl private structure > + * @dev: Pointer to the device structure > + * @regs: FLIS registers > + * @lock: Lock to serialize register access > + * @pctldesc: Pin controller description > + * @pctldev: Pointer to the pin controller device > + * @soc: SoC/PCH specific pin configuration data > + * @families: All families in this pin controller > + * @nfamilies: Number of families in this pin controller > + */ > +struct mrfld_pinctrl { > + struct device *dev; > + void __iomem *regs; > + spinlock_t lock; > + struct pinctrl_desc pctldesc; > + struct pinctrl_dev *pctldev; > + const struct mrfld_pinctrl_soc_data *soc; > + struct mrfld_family *families; > + size_t nfamilies; > +}; > + > +#define pin_to_bufno(f, p) ((p) - (f)->pin_base) > + > +static struct mrfld_family *mrfld_get_family(struct mrfld_pinctrl > *mp, > + unsigned pin) > +{ > + struct mrfld_family *family; > + unsigned int i; > + > + for (i = 0; i < mp->nfamilies; i++) { > + family = &mp->families[i]; > + if (pin >= family->pin_base && > + pin < family->pin_base + family->npins) > + return family; > + } > + > + dev_warn(mp->dev, "failed to find family for pin %u\n", pin); > + return NULL; > +} > + > +static bool mrfld_buf_available(struct mrfld_pinctrl *mp, unsigned > pin) > +{ > + const struct mrfld_family *family; > + > + family = mrfld_get_family(mp, pin); > + if (!family) > + return false; > + > + return !family->protected; > +} > + > +static void __iomem *mrfld_get_bufcfg(struct mrfld_pinctrl *mp, > unsigned pin) > +{ > + const struct mrfld_family *family; > + unsigned bufno; > + > + family = mrfld_get_family(mp, pin); > + if (!family) > + return NULL; > + > + bufno = pin_to_bufno(family, pin); > + return family->regs + BUFCFG_OFFSET + bufno * 4; > +} > + > +static int mrfld_get_groups_count(struct pinctrl_dev *pctldev) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + > + return mp->soc->ngroups; > +} > + > +static const char *mrfld_get_group_name(struct pinctrl_dev *pctldev, > + unsigned group) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + > + return mp->soc->groups[group].name; > +} > + > +static int mrfld_get_group_pins(struct pinctrl_dev *pctldev, unsigned > group, > + const unsigned **pins, unsigned > *npins) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + > + *pins = mp->soc->groups[group].pins; > + *npins = mp->soc->groups[group].npins; > + return 0; > +} > + > +static void mrfld_pin_dbg_show(struct pinctrl_dev *pctldev, struct > seq_file *s, > + unsigned pin) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + void __iomem *bufcfg; > + u32 value, mode; > + > + if (!mrfld_buf_available(mp, pin)) > + return; > + > + bufcfg = mrfld_get_bufcfg(mp, pin); > + value = readl(bufcfg); > + > + mode = (value & BUFCFG_PINMODE_MASK) >> BUFCFG_PINMODE_SHIFT; > + if (!mode) > + seq_puts(s, "GPIO "); > + else > + seq_printf(s, "mode %d ", mode); > + > + seq_printf(s, "0x%08x", value); > +} > + > +static const struct pinctrl_ops mrfld_pinctrl_ops = { > + .get_groups_count = mrfld_get_groups_count, > + .get_group_name = mrfld_get_group_name, > + .get_group_pins = mrfld_get_group_pins, > + .pin_dbg_show = mrfld_pin_dbg_show, > +}; > + > +static int mrfld_get_functions_count(struct pinctrl_dev *pctldev) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + > + return mp->soc->nfunctions; > +} > + > +static const char *mrfld_get_function_name(struct pinctrl_dev > *pctldev, > + unsigned function) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + > + return mp->soc->functions[function].name; > +} > + > +static int mrfld_get_function_groups(struct pinctrl_dev *pctldev, > + unsigned function, > + const char * const **groups, > + unsigned * const ngroups) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + > + *groups = mp->soc->functions[function].groups; > + *ngroups = mp->soc->functions[function].ngroups; > + return 0; > +} > + > +static int mrfld_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned > function, > + unsigned group) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + const struct intel_pingroup *grp = &mp->soc->groups[group]; > + unsigned long flags; > + unsigned int i; > + > + spin_lock_irqsave(&mp->lock, flags); > + > + /* > + * All pins in the groups needs to be accessible and writable > + * before we can enable the mux for this group. > + */ > + for (i = 0; i < grp->npins; i++) { > + if (!mrfld_buf_available(mp, grp->pins[i])) { > + spin_unlock_irqrestore(&mp->lock, flags); > + return -EBUSY; > + } > + } > + > + /* Now enable the mux setting for each pin in the group */ > + for (i = 0; i < grp->npins; i++) { > + void __iomem *bufcfg; > + u32 value; > + > + bufcfg = mrfld_get_bufcfg(mp, grp->pins[i]); > + value = readl(bufcfg); > + > + value &= ~BUFCFG_PINMODE_MASK; > + value |= grp->mode << BUFCFG_PINMODE_SHIFT; > + > + writel(value, bufcfg); > + } > + > + spin_unlock_irqrestore(&mp->lock, flags); > + > + return 0; > +} > + > +static int mrfld_gpio_request_enable(struct pinctrl_dev *pctldev, > + struct pinctrl_gpio_range > *range, > + unsigned pin) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + void __iomem *bufcfg; > + unsigned long flags; > + u32 value; > + > + spin_lock_irqsave(&mp->lock, flags); > + > + if (!mrfld_buf_available(mp, pin)) { > + spin_unlock_irqrestore(&mp->lock, flags); > + return -EBUSY; > + } > + > + bufcfg = mrfld_get_bufcfg(mp, pin); > + value = readl(bufcfg); > + > + /* Put the pad into GPIO mode */ > + value &= ~BUFCFG_PINMODE_MASK; > + > + writel(value, bufcfg); > + > + spin_unlock_irqrestore(&mp->lock, flags); > + > + return 0; > +} > + > +static const struct pinmux_ops mrfld_pinmux_ops = { > + .get_functions_count = mrfld_get_functions_count, > + .get_function_name = mrfld_get_function_name, > + .get_function_groups = mrfld_get_function_groups, > + .set_mux = mrfld_pinmux_set_mux, > + .gpio_request_enable = mrfld_gpio_request_enable, > +}; > + > +static int mrfld_config_get(struct pinctrl_dev *pctldev, unsigned > pin, > + unsigned long *config) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + enum pin_config_param param = > pinconf_to_config_param(*config); > + u32 value, term; > + u16 arg = 0; > + > + if (!mrfld_buf_available(mp, pin)) > + return -ENOTSUPP; > + > + value = readl(mrfld_get_bufcfg(mp, pin)); > + term = (value & BUFCFG_PUPD_VAL_MASK) >> > BUFCFG_PUPD_VAL_SHIFT; > + > + switch (param) { > + case PIN_CONFIG_BIAS_DISABLE: > + if (value & (BUFCFG_PU_EN | BUFCFG_PD_EN)) > + return -EINVAL; > + break; > + > + case PIN_CONFIG_BIAS_PULL_UP: > + if (!(value & BUFCFG_PU_EN)) > + return -EINVAL; > + > + switch (term) { > + case BUFCFG_PUPD_VAL_910: > + arg = 910; > + break; > + case BUFCFG_PUPD_VAL_2K: > + arg = 2000; > + break; > + case BUFCFG_PUPD_VAL_20K: > + arg = 20000; > + break; > + case BUFCFG_PUPD_VAL_50K: > + arg = 50000; > + break; > + } > + > + break; > + > + case PIN_CONFIG_BIAS_PULL_DOWN: > + if (!(value & BUFCFG_PD_EN)) > + return -EINVAL; > + > + switch (term) { > + case BUFCFG_PUPD_VAL_910: > + arg = 910; > + break; > + case BUFCFG_PUPD_VAL_2K: > + arg = 2000; > + break; > + case BUFCFG_PUPD_VAL_20K: > + arg = 20000; > + break; > + case BUFCFG_PUPD_VAL_50K: > + arg = 50000; > + break; > + } > + > + break; > + > + case PIN_CONFIG_DRIVE_OPEN_DRAIN: > + if (!(value & BUFCFG_OD_EN)) > + return -EINVAL; > + break; > + > + default: > + return -ENOTSUPP; > + } > + > + *config = pinconf_to_config_packed(param, arg); > + return 0; > +} > + > +static int mrfld_config_set_pull(struct mrfld_pinctrl *mp, unsigned > pin, > + unsigned long config) > +{ > + unsigned param = pinconf_to_config_param(config); > + unsigned arg = pinconf_to_config_argument(config); > + void __iomem *bufcfg; > + unsigned long flags; > + int ret = 0; > + u32 value; > + > + spin_lock_irqsave(&mp->lock, flags); > + > + bufcfg = mrfld_get_bufcfg(mp, pin); > + value = readl(bufcfg); > + > + switch (param) { > + case PIN_CONFIG_BIAS_DISABLE: > + value &= ~(BUFCFG_PU_EN | BUFCFG_PD_EN | > BUFCFG_PUPD_VAL_MASK); > + break; > + > + case PIN_CONFIG_BIAS_PULL_UP: > + value &= ~(BUFCFG_PU_EN | BUFCFG_PD_EN | > BUFCFG_PUPD_VAL_MASK); > + value |= BUFCFG_PU_EN; > + > + switch (arg) { > + case 50000: > + value |= BUFCFG_PUPD_VAL_50K << > BUFCFG_PUPD_VAL_SHIFT; > + break; > + case 20000: > + value |= BUFCFG_PUPD_VAL_20K << > BUFCFG_PUPD_VAL_SHIFT; > + break; > + case 2000: > + value |= BUFCFG_PUPD_VAL_2K << > BUFCFG_PUPD_VAL_SHIFT; > + break; > + case 910: > + value |= BUFCFG_PUPD_VAL_910 << > BUFCFG_PUPD_VAL_SHIFT; > + break; > + default: > + ret = -EINVAL; > + } > + > + break; > + > + case PIN_CONFIG_BIAS_PULL_DOWN: > + value &= ~(BUFCFG_PU_EN | BUFCFG_PD_EN | > BUFCFG_PUPD_VAL_MASK); > + value |= BUFCFG_PD_EN; > + > + switch (arg) { > + case 50000: > + value |= BUFCFG_PUPD_VAL_50K << > BUFCFG_PUPD_VAL_SHIFT; > + break; > + case 20000: > + value |= BUFCFG_PUPD_VAL_20K << > BUFCFG_PUPD_VAL_SHIFT; > + break; > + case 2000: > + value |= BUFCFG_PUPD_VAL_2K << > BUFCFG_PUPD_VAL_SHIFT; > + break; > + case 910: > + value |= BUFCFG_PUPD_VAL_910 << > BUFCFG_PUPD_VAL_SHIFT; > + break; > + default: > + ret = -EINVAL; > + } > + > + break; > + > + case PIN_CONFIG_DRIVE_OPEN_DRAIN: > + if (arg) > + value |= BUFCFG_OD_EN; > + else > + value &= ~BUFCFG_OD_EN; > + break; > + } > + > + if (ret == 0) > + writel(value, bufcfg); > + > + spin_unlock_irqrestore(&mp->lock, flags); > + return 0; > +} > + > +static int mrfld_config_set(struct pinctrl_dev *pctldev, unsigned > pin, > + unsigned long *configs, unsigned > nconfigs) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + unsigned int i; > + int ret; > + > + for (i = 0; i < nconfigs; i++) { > + switch (pinconf_to_config_param(configs[i])) { > + case PIN_CONFIG_BIAS_DISABLE: > + case PIN_CONFIG_BIAS_PULL_UP: > + case PIN_CONFIG_BIAS_PULL_DOWN: > + case PIN_CONFIG_DRIVE_OPEN_DRAIN: > + ret = mrfld_config_set_pull(mp, pin, > configs[i]); > + if (ret) > + return ret; > + break; > + > + default: > + return -ENOTSUPP; > + } > + } > + > + return 0; > +} > + > +static const struct pinconf_ops mrfld_pinconf_ops = { > + .is_generic = true, > + .pin_config_get = mrfld_config_get, > + .pin_config_set = mrfld_config_set, > +}; > + > +static const struct pinctrl_desc mrfld_pinctrl_desc = { > + .pctlops = &mrfld_pinctrl_ops, > + .pmxops = &mrfld_pinmux_ops, > + .confops = &mrfld_pinconf_ops, > + .owner = THIS_MODULE, > +}; > + > +static int mrfld_pinctrl_probe(struct platform_device *pdev) > +{ > + const struct mrfld_pinctrl_soc_data *soc = &mrfld_soc_data; > + struct mrfld_pinctrl *mp; > + struct resource *mem; > + void __iomem *regs; > + unsigned int i; > + > + mp = devm_kzalloc(&pdev->dev, sizeof(*mp), GFP_KERNEL); > + if (!mp) > + return -ENOMEM; > + > + mp->dev = &pdev->dev; > + mp->soc = soc; > + spin_lock_init(&mp->lock); > + > + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + regs = devm_ioremap_resource(&pdev->dev, mem); > + if (IS_ERR(regs)) > + return PTR_ERR(regs); > + > + /* > + * Make a copy of the families which we can use to hold > pointers > + * to the registers. > + */ > + mp->nfamilies = mp->soc->nfamilies; > + mp->families = devm_kmemdup(&pdev->dev, mp->soc->families, > + mp->nfamilies * sizeof(*mp->soc- > >families), > + GFP_KERNEL); > + if (!mp->families) > + return -ENOMEM; > + > + /* Splice memory resource by chunk per family */ > + for (i = 0; i < mp->nfamilies; i++) { > + struct mrfld_family *family = &mp->families[i]; > + > + family->regs = regs + family->barno * > MRFLD_FAMILY_LEN; > + } > + > + mp->pctldesc = mrfld_pinctrl_desc; > + mp->pctldesc.name = dev_name(&pdev->dev); > + mp->pctldesc.pins = mp->soc->pins; > + mp->pctldesc.npins = mp->soc->npins; > + > + mp->pctldev = devm_pinctrl_register(&pdev->dev, &mp- > >pctldesc, mp); > + if (IS_ERR(mp->pctldev)) { > + dev_err(&pdev->dev, "failed to register pinctrl > driver\n"); > + return PTR_ERR(mp->pctldev); > + } > + > + platform_set_drvdata(pdev, mp); > + return 0; > +} > + > +static int mrfld_pinctrl_remove(struct platform_device *pdev) > +{ > + return 0; > +} > + > +static struct platform_driver mrfld_pinctrl_driver = { > + .probe = mrfld_pinctrl_probe, > + .remove = mrfld_pinctrl_remove, > + .driver = { > + .name = "merrifield-pinctrl", > + }, > +}; > + > +static int __init mrfld_pinctrl_init(void) > +{ > + return platform_driver_register(&mrfld_pinctrl_driver); > +} > +subsys_initcall(mrfld_pinctrl_init); > + > +static void __exit mrfld_pinctrl_exit(void) > +{ > + platform_driver_unregister(&mrfld_pinctrl_driver); > +} > +module_exit(mrfld_pinctrl_exit); > + > +MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>"); > +MODULE_DESCRIPTION("Intel Merrifield SoC FLIS driver"); > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("platform:merrifield-pinctrl");
On Sun, Jun 19, 2016 at 06:44:59PM +0300, Andy Shevchenko wrote: > This driver adds pinctrl support for Intel Merrifield. The IP block which is > called Family-Level Interface Shim is a separate entity in SoC. The GPIO driver > (gpio-intel-mid.c) will be updated accordingly to support pinctrl interface. > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Looks pretty good already. I have couple of comments, though. > --- > drivers/pinctrl/intel/Kconfig | 11 + > drivers/pinctrl/intel/Makefile | 1 + > drivers/pinctrl/intel/pinctrl-merrifield.c | 908 +++++++++++++++++++++++++++++ > 3 files changed, 920 insertions(+) > create mode 100644 drivers/pinctrl/intel/pinctrl-merrifield.c > > diff --git a/drivers/pinctrl/intel/Kconfig b/drivers/pinctrl/intel/Kconfig > index 1c74e03..7ad5901 100644 > --- a/drivers/pinctrl/intel/Kconfig > +++ b/drivers/pinctrl/intel/Kconfig > @@ -29,6 +29,17 @@ config PINCTRL_CHERRYVIEW > Cherryview/Braswell pinctrl driver provides an interface that > allows configuring of SoC pins and using them as GPIOs. > > +config PINCTRL_MERRIFIELD > + tristate "Intel Merrifield FLIS driver" I would not mention "FLIS" here. Nobody knows what it is. Just call it pinctrl. > + depends on X86_INTEL_MID > + select PINMUX > + select PINCONF > + select GENERIC_PINCONF > + help > + Merrifield Family-Level Interface Shim (FLIS) driver provides an Here it is ok. > + interface that allows configuring of SoC pins and using them as > + GPIOs. > + > config PINCTRL_INTEL > tristate > select PINMUX > diff --git a/drivers/pinctrl/intel/Makefile b/drivers/pinctrl/intel/Makefile > index 03bc68e..3080307 100644 > --- a/drivers/pinctrl/intel/Makefile > +++ b/drivers/pinctrl/intel/Makefile > @@ -2,6 +2,7 @@ > > obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o > obj-$(CONFIG_PINCTRL_CHERRYVIEW) += pinctrl-cherryview.o > +obj-$(CONFIG_PINCTRL_MERRIFIELD) += pinctrl-merrifield.o > obj-$(CONFIG_PINCTRL_INTEL) += pinctrl-intel.o > obj-$(CONFIG_PINCTRL_BROXTON) += pinctrl-broxton.o > obj-$(CONFIG_PINCTRL_SUNRISEPOINT) += pinctrl-sunrisepoint.o > diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c b/drivers/pinctrl/intel/pinctrl-merrifield.c > new file mode 100644 > index 0000000..b49af3b > --- /dev/null > +++ b/drivers/pinctrl/intel/pinctrl-merrifield.c > @@ -0,0 +1,908 @@ > +/* > + * Intel Merrifield SoC Family-Level Interface Shim (FLIS) driver Also here call it pinctrl instead. You can mention that the underlying hardware block is called FLIS. > + * > + * Copyright (C) 2016, Intel Corporation > + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/bitops.h> > +#include <linux/err.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/pinctrl/pinconf.h> > +#include <linux/pinctrl/pinconf-generic.h> > +#include <linux/pinctrl/pinctrl.h> > +#include <linux/pinctrl/pinmux.h> > + > +#include "pinctrl-intel.h" > + > +#define MRFLD_FAMILY_NR 64 > +#define MRFLD_FAMILY_LEN 0x400 > + > +#define SLEW_OFFSET 0x000 > +#define BUFCFG_OFFSET 0x100 > +#define MISC_OFFSET 0x300 > + > +#define BUFCFG_PINMODE_SHIFT 0 > +#define BUFCFG_PINMODE_MASK GENMASK(2, 0) > +#define BUFCFG_PUPD_VAL_SHIFT 4 > +#define BUFCFG_PUPD_VAL_MASK GENMASK(5, 4) > +#define BUFCFG_PUPD_VAL_2K 0 > +#define BUFCFG_PUPD_VAL_20K 1 > +#define BUFCFG_PUPD_VAL_50K 2 > +#define BUFCFG_PUPD_VAL_910 3 > +#define BUFCFG_PU_EN BIT(8) > +#define BUFCFG_PD_EN BIT(9) > +#define BUFCFG_OD_EN BIT(21) > + > +/** > + * struct mrfld_family - Intel pin family description > + * @barno: MMIO BAR number where registers for this family reside > + * @pin_base: Starting pin of pins in this family > + * @npins: Number of pins in this family > + * @protected: True if family is protected by access > + * @regs: family specific common registers > + */ > +struct mrfld_family { > + unsigned barno; > + unsigned pin_base; > + size_t npins; > + bool protected; > + void __iomem *regs; > +}; > + > +#define MRFLD_FAMILY(b, s, e) \ > + { \ > + .barno = (b), \ > + .pin_base = (s), \ > + .npins = (e) - (s) + 1, \ > + } > + > +#define MRFLD_FAMILY_PROTECTED(b, s, e) \ > + { \ > + .barno = (b), \ > + .pin_base = (s), \ > + .npins = (e) - (s) + 1, \ > + .protected = true, \ > + } > + > +static const struct pinctrl_pin_desc mrfld_pins[] = { > + /* Family 0: OCP2SSC (0 pins) */ > + /* Family 1: ULPI (13 pins) */ > + PINCTRL_PIN(0, "USB_ULPI_0_CLK"), > + PINCTRL_PIN(1, "USB_ULPI_0_DATA_0"), > + PINCTRL_PIN(2, "USB_ULPI_0_DATA_1"), > + PINCTRL_PIN(3, "USB_ULPI_0_DATA_2"), > + PINCTRL_PIN(4, "USB_ULPI_0_DATA_3"), > + PINCTRL_PIN(5, "USB_ULPI_0_DATA_4"), > + PINCTRL_PIN(6, "USB_ULPI_0_DATA_5"), > + PINCTRL_PIN(7, "USB_ULPI_0_DATA_6"), > + PINCTRL_PIN(8, "USB_ULPI_0_DATA_7"), > + PINCTRL_PIN(9, "USB_ULPI_0_DIR"), > + PINCTRL_PIN(10, "USB_ULPI_0_NXT"), > + PINCTRL_PIN(11, "USB_ULPI_0_REFCLK"), > + PINCTRL_PIN(12, "USB_ULPI_0_STP"), > + /* Family 2: eMMC (24 pins) */ > + PINCTRL_PIN(13, "EMMC_0_CLK"), > + PINCTRL_PIN(14, "EMMC_0_CMD"), > + PINCTRL_PIN(15, "EMMC_0_D_0"), > + PINCTRL_PIN(16, "EMMC_0_D_1"), > + PINCTRL_PIN(17, "EMMC_0_D_2"), > + PINCTRL_PIN(18, "EMMC_0_D_3"), > + PINCTRL_PIN(19, "EMMC_0_D_4"), > + PINCTRL_PIN(20, "EMMC_0_D_5"), > + PINCTRL_PIN(21, "EMMC_0_D_6"), > + PINCTRL_PIN(22, "EMMC_0_D_7"), > + PINCTRL_PIN(23, "EMMC_0_RST_B"), > + PINCTRL_PIN(24, "GP_EMMC_1_CLK"), > + PINCTRL_PIN(25, "GP_EMMC_1_CMD"), > + PINCTRL_PIN(26, "GP_EMMC_1_D_0"), > + PINCTRL_PIN(27, "GP_EMMC_1_D_1"), > + PINCTRL_PIN(28, "GP_EMMC_1_D_2"), > + PINCTRL_PIN(29, "GP_EMMC_1_D_3"), > + PINCTRL_PIN(30, "GP_EMMC_1_D_4"), > + PINCTRL_PIN(31, "GP_EMMC_1_D_5"), > + PINCTRL_PIN(32, "GP_EMMC_1_D_6"), > + PINCTRL_PIN(33, "GP_EMMC_1_D_7"), > + PINCTRL_PIN(34, "GP_EMMC_1_RST_B"), > + PINCTRL_PIN(35, "GP_28"), > + PINCTRL_PIN(36, "GP_29"), > + /* Family 3: SDIO (20 pins) */ > + PINCTRL_PIN(37, "GP_SDIO_0_CD_B"), > + PINCTRL_PIN(38, "GP_SDIO_0_CLK"), > + PINCTRL_PIN(39, "GP_SDIO_0_CMD"), > + PINCTRL_PIN(40, "GP_SDIO_0_DAT_0"), > + PINCTRL_PIN(41, "GP_SDIO_0_DAT_1"), > + PINCTRL_PIN(42, "GP_SDIO_0_DAT_2"), > + PINCTRL_PIN(43, "GP_SDIO_0_DAT_3"), > + PINCTRL_PIN(44, "GP_SDIO_0_LVL_CLK_FB"), > + PINCTRL_PIN(45, "GP_SDIO_0_LVL_CMD_DIR"), > + PINCTRL_PIN(46, "GP_SDIO_0_LVL_DAT_DIR"), > + PINCTRL_PIN(47, "GP_SDIO_0_LVL_SEL"), > + PINCTRL_PIN(48, "GP_SDIO_0_POWERDOWN_B"), > + PINCTRL_PIN(49, "GP_SDIO_0_WP"), > + PINCTRL_PIN(50, "GP_SDIO_1_CLK"), > + PINCTRL_PIN(51, "GP_SDIO_1_CMD"), > + PINCTRL_PIN(52, "GP_SDIO_1_DAT_0"), > + PINCTRL_PIN(53, "GP_SDIO_1_DAT_1"), > + PINCTRL_PIN(54, "GP_SDIO_1_DAT_2"), > + PINCTRL_PIN(55, "GP_SDIO_1_DAT_3"), > + PINCTRL_PIN(56, "GP_SDIO_1_POWERDOWN_B"), > + /* Family 4: HSI (8 pins) */ > + PINCTRL_PIN(57, "MHSI_ACDATA"), > + PINCTRL_PIN(58, "MHSI_ACFLAG"), > + PINCTRL_PIN(59, "MHSI_ACREADY"), > + PINCTRL_PIN(60, "MHSI_ACWAKE"), > + PINCTRL_PIN(61, "MHSI_CADATA"), > + PINCTRL_PIN(62, "MHSI_CAFLAG"), > + PINCTRL_PIN(63, "MHSI_CAREADY"), > + PINCTRL_PIN(64, "MHSI_CAWAKE"), > + /* Family 5: SSP Audio (14 pins) */ > + PINCTRL_PIN(65, "GP_MSLIM_0_BCLK"), > + PINCTRL_PIN(66, "GP_MSLIM_0_BDAT"), > + PINCTRL_PIN(67, "GP_SSP_0_CLK"), > + PINCTRL_PIN(68, "GP_SSP_0_FS"), > + PINCTRL_PIN(69, "GP_SSP_0_RXD"), > + PINCTRL_PIN(70, "GP_SSP_0_TXD"), > + PINCTRL_PIN(71, "GP_SSP_1_CLK"), > + PINCTRL_PIN(72, "GP_SSP_1_FS"), > + PINCTRL_PIN(73, "GP_SSP_1_RXD"), > + PINCTRL_PIN(74, "GP_SSP_1_TXD"), > + PINCTRL_PIN(75, "GP_SSP_2_CLK"), > + PINCTRL_PIN(76, "GP_SSP_2_FS"), > + PINCTRL_PIN(77, "GP_SSP_2_RXD"), > + PINCTRL_PIN(78, "GP_SSP_2_TXD"), > + /* Family 6: GP SSP (22 pins) */ > + PINCTRL_PIN(79, "GP_SSP_3_CLK"), > + PINCTRL_PIN(80, "GP_SSP_3_FS"), > + PINCTRL_PIN(81, "GP_SSP_3_RXD"), > + PINCTRL_PIN(82, "GP_SSP_3_TXD"), > + PINCTRL_PIN(83, "GP_SSP_4_CLK"), > + PINCTRL_PIN(84, "GP_SSP_4_FS_0"), > + PINCTRL_PIN(85, "GP_SSP_4_FS_1"), > + PINCTRL_PIN(86, "GP_SSP_4_FS_2"), > + PINCTRL_PIN(87, "GP_SSP_4_FS_3"), > + PINCTRL_PIN(88, "GP_SSP_4_RXD"), > + PINCTRL_PIN(89, "GP_SSP_4_TXD"), > + PINCTRL_PIN(90, "GP_SSP_5_CLK"), > + PINCTRL_PIN(91, "GP_SSP_5_FS_0"), > + PINCTRL_PIN(92, "GP_SSP_5_FS_1"), > + PINCTRL_PIN(93, "GP_SSP_5_FS_2"), > + PINCTRL_PIN(94, "GP_SSP_5_FS_3"), > + PINCTRL_PIN(95, "GP_SSP_5_RXD"), > + PINCTRL_PIN(96, "GP_SSP_5_TXD"), > + PINCTRL_PIN(97, "GP_SSP_6_CLK"), > + PINCTRL_PIN(98, "GP_SSP_6_FS"), > + PINCTRL_PIN(99, "GP_SSP_6_RXD"), > + PINCTRL_PIN(100, "GP_SSP_6_TXD"), > + /* Family 7: I2C (14 pins) */ > + PINCTRL_PIN(101, "GP_I2C_1_SCL"), > + PINCTRL_PIN(102, "GP_I2C_1_SDA"), > + PINCTRL_PIN(103, "GP_I2C_2_SCL"), > + PINCTRL_PIN(104, "GP_I2C_2_SDA"), > + PINCTRL_PIN(105, "GP_I2C_3_SCL"), > + PINCTRL_PIN(106, "GP_I2C_3_SDA"), > + PINCTRL_PIN(107, "GP_I2C_4_SCL"), > + PINCTRL_PIN(108, "GP_I2C_4_SDA"), > + PINCTRL_PIN(109, "GP_I2C_5_SCL"), > + PINCTRL_PIN(110, "GP_I2C_5_SDA"), > + PINCTRL_PIN(111, "GP_I2C_6_SCL"), > + PINCTRL_PIN(112, "GP_I2C_6_SDA"), > + PINCTRL_PIN(113, "GP_I2C_7_SCL"), > + PINCTRL_PIN(114, "GP_I2C_7_SDA"), > + /* Family 8: UART (12 pins) */ > + PINCTRL_PIN(115, "GP_UART_0_CTS"), > + PINCTRL_PIN(116, "GP_UART_0_RTS"), > + PINCTRL_PIN(117, "GP_UART_0_RX"), > + PINCTRL_PIN(118, "GP_UART_0_TX"), > + PINCTRL_PIN(119, "GP_UART_1_CTS"), > + PINCTRL_PIN(120, "GP_UART_1_RTS"), > + PINCTRL_PIN(121, "GP_UART_1_RX"), > + PINCTRL_PIN(122, "GP_UART_1_TX"), > + PINCTRL_PIN(123, "GP_UART_2_CTS"), > + PINCTRL_PIN(124, "GP_UART_2_RTS"), > + PINCTRL_PIN(125, "GP_UART_2_RX"), > + PINCTRL_PIN(126, "GP_UART_2_TX"), > + /* Family 9: GPIO South (19 pins) */ > + PINCTRL_PIN(127, "GP_13"), > + PINCTRL_PIN(128, "GP_14"), > + PINCTRL_PIN(129, "GP_15"), > + PINCTRL_PIN(130, "GP_16"), > + PINCTRL_PIN(131, "GP_17"), > + PINCTRL_PIN(132, "GP_18"), > + PINCTRL_PIN(133, "GP_19"), > + PINCTRL_PIN(134, "GP_20"), > + PINCTRL_PIN(135, "GP_21"), > + PINCTRL_PIN(136, "GP_22"), > + PINCTRL_PIN(137, "GP_23"), > + PINCTRL_PIN(138, "GP_24"), > + PINCTRL_PIN(139, "GP_25"), > + PINCTRL_PIN(140, "GP_FAST_INT_0"), > + PINCTRL_PIN(141, "GP_FAST_INT_1"), > + PINCTRL_PIN(142, "GP_FAST_INT_2"), > + PINCTRL_PIN(143, "GP_FAST_INT_3"), > + PINCTRL_PIN(144, "GP_PWM_0"), > + PINCTRL_PIN(145, "GP_PWM_1"), > + /* Family 10: Camera Sideband (12 pins) */ > + PINCTRL_PIN(146, "GP_CAMERASB_0"), > + PINCTRL_PIN(147, "GP_CAMERASB_1"), > + PINCTRL_PIN(148, "GP_CAMERASB_2"), > + PINCTRL_PIN(149, "GP_CAMERASB_3"), > + PINCTRL_PIN(150, "GP_CAMERASB_4"), > + PINCTRL_PIN(151, "GP_CAMERASB_5"), > + PINCTRL_PIN(152, "GP_CAMERASB_6"), > + PINCTRL_PIN(153, "GP_CAMERASB_7"), > + PINCTRL_PIN(154, "GP_CAMERASB_8"), > + PINCTRL_PIN(155, "GP_CAMERASB_9"), > + PINCTRL_PIN(156, "GP_CAMERASB_10"), > + PINCTRL_PIN(157, "GP_CAMERASB_11"), > + /* Family 11: Clock (22 pins) */ > + PINCTRL_PIN(158, "GP_CLKPH_0"), > + PINCTRL_PIN(159, "GP_CLKPH_1"), > + PINCTRL_PIN(160, "GP_CLKPH_2"), > + PINCTRL_PIN(161, "GP_CLKPH_3"), > + PINCTRL_PIN(162, "GP_CLKPH_4"), > + PINCTRL_PIN(163, "GP_CLKPH_5"), > + PINCTRL_PIN(164, "GP_HDMI_HPD"), > + PINCTRL_PIN(165, "GP_INTD_DSI_TE1"), > + PINCTRL_PIN(166, "GP_INTD_DSI_TE2"), > + PINCTRL_PIN(167, "OSC_CLK_CTRL_0"), > + PINCTRL_PIN(168, "OSC_CLK_CTRL_1"), > + PINCTRL_PIN(169, "OSC_CLK_OUT_0"), > + PINCTRL_PIN(170, "OSC_CLK_OUT_1"), > + PINCTRL_PIN(171, "OSC_CLK_OUT_2"), > + PINCTRL_PIN(172, "OSC_CLK_OUT_3"), > + PINCTRL_PIN(173, "OSC_CLK_OUT_4"), > + PINCTRL_PIN(174, "RESETOUT_B"), > + PINCTRL_PIN(175, "XXPMODE"), > + PINCTRL_PIN(176, "XXPRDY"), > + PINCTRL_PIN(177, "XXPREQ_B"), > + PINCTRL_PIN(178, "GP_26"), > + PINCTRL_PIN(179, "GP_27"), > + /* Family 12: MSIC (15 pins) */ > + PINCTRL_PIN(180, "I2C_0_SCL"), > + PINCTRL_PIN(181, "I2C_0_SDA"), > + PINCTRL_PIN(182, "IERR_B"), > + PINCTRL_PIN(183, "JTAG_TCKC"), > + PINCTRL_PIN(184, "JTAG_TDIC"), > + PINCTRL_PIN(185, "JTAG_TDOC"), > + PINCTRL_PIN(186, "JTAG_TMSC"), > + PINCTRL_PIN(187, "JTAG_TRST_B"), > + PINCTRL_PIN(188, "PROCHOT_B"), > + PINCTRL_PIN(189, "RTC_CLK"), > + PINCTRL_PIN(190, "SVID_ALERT_B"), > + PINCTRL_PIN(191, "SVID_VCLK"), > + PINCTRL_PIN(192, "SVID_VDIO"), > + PINCTRL_PIN(193, "THERMTRIP_B"), > + PINCTRL_PIN(194, "STANDBY"), > + /* Family 13: Keyboard (20 pins) */ > + PINCTRL_PIN(195, "GP_KBD_DKIN_0"), > + PINCTRL_PIN(196, "GP_KBD_DKIN_1"), > + PINCTRL_PIN(197, "GP_KBD_DKIN_2"), > + PINCTRL_PIN(198, "GP_KBD_DKIN_3"), > + PINCTRL_PIN(199, "GP_KBD_MKIN_0"), > + PINCTRL_PIN(200, "GP_KBD_MKIN_1"), > + PINCTRL_PIN(201, "GP_KBD_MKIN_2"), > + PINCTRL_PIN(202, "GP_KBD_MKIN_3"), > + PINCTRL_PIN(203, "GP_KBD_MKIN_4"), > + PINCTRL_PIN(204, "GP_KBD_MKIN_5"), > + PINCTRL_PIN(205, "GP_KBD_MKIN_6"), > + PINCTRL_PIN(206, "GP_KBD_MKIN_7"), > + PINCTRL_PIN(207, "GP_KBD_MKOUT_0"), > + PINCTRL_PIN(208, "GP_KBD_MKOUT_1"), > + PINCTRL_PIN(209, "GP_KBD_MKOUT_2"), > + PINCTRL_PIN(210, "GP_KBD_MKOUT_3"), > + PINCTRL_PIN(211, "GP_KBD_MKOUT_4"), > + PINCTRL_PIN(212, "GP_KBD_MKOUT_5"), > + PINCTRL_PIN(213, "GP_KBD_MKOUT_6"), > + PINCTRL_PIN(214, "GP_KBD_MKOUT_7"), > + /* Family 14: GPIO North (13 pins) */ > + PINCTRL_PIN(215, "GP_0"), > + PINCTRL_PIN(216, "GP_1"), > + PINCTRL_PIN(217, "GP_2"), > + PINCTRL_PIN(218, "GP_3"), > + PINCTRL_PIN(219, "GP_4"), > + PINCTRL_PIN(220, "GP_5"), > + PINCTRL_PIN(221, "GP_6"), > + PINCTRL_PIN(222, "GP_7"), > + PINCTRL_PIN(223, "GP_8"), > + PINCTRL_PIN(224, "GP_9"), > + PINCTRL_PIN(225, "GP_10"), > + PINCTRL_PIN(226, "GP_11"), > + PINCTRL_PIN(227, "GP_12"), > + /* Family 15: PTI (5 pins) */ > + PINCTRL_PIN(228, "GP_MPTI_CLK"), > + PINCTRL_PIN(229, "GP_MPTI_DATA_0"), > + PINCTRL_PIN(230, "GP_MPTI_DATA_1"), > + PINCTRL_PIN(231, "GP_MPTI_DATA_2"), > + PINCTRL_PIN(232, "GP_MPTI_DATA_3"), > + /* Family 16: USB3 (0 pins) */ > + /* Family 17: HSIC (0 pins) */ > + /* Family 18: Broadcast (0 pins) */ > +}; > + > +static const unsigned mrfld_pwm0_pins[] = { 144 }; > +static const unsigned mrfld_pwm1_pins[] = { 145 }; > +static const unsigned mrfld_pwm2_pins[] = { 132 }; > +static const unsigned mrfld_pwm3_pins[] = { 133 }; > + > +static const struct intel_pingroup mrfld_groups[] = { > + PIN_GROUP("pwm0_grp", mrfld_pwm0_pins, 1), > + PIN_GROUP("pwm1_grp", mrfld_pwm1_pins, 1), > + PIN_GROUP("pwm2_grp", mrfld_pwm2_pins, 1), > + PIN_GROUP("pwm3_grp", mrfld_pwm3_pins, 1), > +}; > + > +static const char * const mrfld_pwm0_groups[] = { "pwm0_grp" }; > +static const char * const mrfld_pwm1_groups[] = { "pwm1_grp" }; > +static const char * const mrfld_pwm2_groups[] = { "pwm2_grp" }; > +static const char * const mrfld_pwm3_groups[] = { "pwm3_grp" }; > + > +static const struct intel_function mrfld_functions[] = { > + FUNCTION("pwm0", mrfld_pwm0_groups), > + FUNCTION("pwm1", mrfld_pwm1_groups), > + FUNCTION("pwm2", mrfld_pwm2_groups), > + FUNCTION("pwm3", mrfld_pwm3_groups), > +}; > + > +static const struct mrfld_family mrfld_families[] = { > + MRFLD_FAMILY(1, 0, 12), > + MRFLD_FAMILY(2, 13, 36), > + MRFLD_FAMILY(3, 37, 56), > + MRFLD_FAMILY(4, 57, 64), > + MRFLD_FAMILY(5, 65, 78), > + MRFLD_FAMILY(6, 79, 100), > + MRFLD_FAMILY(7, 101, 114), > + MRFLD_FAMILY(8, 115, 126), > + MRFLD_FAMILY(9, 127, 145), > + MRFLD_FAMILY(10, 146, 157), > + MRFLD_FAMILY(11, 158, 179), > + MRFLD_FAMILY_PROTECTED(12, 180, 194), > + MRFLD_FAMILY(13, 195, 214), > + MRFLD_FAMILY(14, 215, 227), > + MRFLD_FAMILY(15, 228, 232), > +}; This all looks nice :) > + > +/** > + * struct mrfld_pinctrl_soc_data - Intel pin controller per-SoC configuration > + * @name: Name of the family > + * @pins: Array if pins this pinctrl controls > + * @npins: Number of pins in the array > + * @groups: Array of pin groups > + * @ngroups: Number of groups in the array > + * @functions: Array of functions > + * @nfunctions: Number of functions in the array > + * @families: Array of families this pinctrl handles > + * @nfamilies: Number of families in the array > + * > + * The @families is used as a template by the core driver. It will make > + * copy of all families and fill in rest of the information. > + */ > +struct mrfld_pinctrl_soc_data { > + const char *name; > + const struct pinctrl_pin_desc *pins; > + size_t npins; > + const struct intel_pingroup *groups; > + size_t ngroups; > + const struct intel_function *functions; > + size_t nfunctions; > + const struct mrfld_family *families; > + size_t nfamilies; > +}; > + > +static const struct mrfld_pinctrl_soc_data mrfld_soc_data = { > + .pins = mrfld_pins, > + .npins = ARRAY_SIZE(mrfld_pins), > + .groups = mrfld_groups, > + .ngroups = ARRAY_SIZE(mrfld_groups), > + .functions = mrfld_functions, > + .nfunctions = ARRAY_SIZE(mrfld_functions), > + .families = mrfld_families, > + .nfamilies = ARRAY_SIZE(mrfld_families), > +}; > + These are pointless. There can be only one kind of SoC data in Merrifield so please drop these. See for example pinctrl-cherryview.c. > +/** > + * struct mrfld_pinctrl - Intel Merrifield pinctrl private structure > + * @dev: Pointer to the device structure > + * @regs: FLIS registers > + * @lock: Lock to serialize register access > + * @pctldesc: Pin controller description > + * @pctldev: Pointer to the pin controller device > + * @soc: SoC/PCH specific pin configuration data > + * @families: All families in this pin controller > + * @nfamilies: Number of families in this pin controller > + */ > +struct mrfld_pinctrl { > + struct device *dev; > + void __iomem *regs; > + spinlock_t lock; > + struct pinctrl_desc pctldesc; > + struct pinctrl_dev *pctldev; > + const struct mrfld_pinctrl_soc_data *soc; > + struct mrfld_family *families; > + size_t nfamilies; > +}; > + > +#define pin_to_bufno(f, p) ((p) - (f)->pin_base) > + > +static struct mrfld_family *mrfld_get_family(struct mrfld_pinctrl *mp, > + unsigned pin) I guess the preferred spelling is "unsigned int" for new stuff. > +{ > + struct mrfld_family *family; > + unsigned int i; > + > + for (i = 0; i < mp->nfamilies; i++) { > + family = &mp->families[i]; > + if (pin >= family->pin_base && > + pin < family->pin_base + family->npins) > + return family; > + } > + > + dev_warn(mp->dev, "failed to find family for pin %u\n", pin); > + return NULL; > +} > + > +static bool mrfld_buf_available(struct mrfld_pinctrl *mp, unsigned pin) > +{ > + const struct mrfld_family *family; > + > + family = mrfld_get_family(mp, pin); > + if (!family) > + return false; > + > + return !family->protected; > +} > + > +static void __iomem *mrfld_get_bufcfg(struct mrfld_pinctrl *mp, unsigned pin) > +{ > + const struct mrfld_family *family; > + unsigned bufno; > + > + family = mrfld_get_family(mp, pin); > + if (!family) > + return NULL; > + > + bufno = pin_to_bufno(family, pin); > + return family->regs + BUFCFG_OFFSET + bufno * 4; > +} > + > +static int mrfld_get_groups_count(struct pinctrl_dev *pctldev) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + > + return mp->soc->ngroups; > +} > + > +static const char *mrfld_get_group_name(struct pinctrl_dev *pctldev, > + unsigned group) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + > + return mp->soc->groups[group].name; > +} > + > +static int mrfld_get_group_pins(struct pinctrl_dev *pctldev, unsigned group, > + const unsigned **pins, unsigned *npins) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + > + *pins = mp->soc->groups[group].pins; > + *npins = mp->soc->groups[group].npins; > + return 0; > +} > + > +static void mrfld_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, > + unsigned pin) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + void __iomem *bufcfg; > + u32 value, mode; > + > + if (!mrfld_buf_available(mp, pin)) > + return; > + > + bufcfg = mrfld_get_bufcfg(mp, pin); > + value = readl(bufcfg); > + > + mode = (value & BUFCFG_PINMODE_MASK) >> BUFCFG_PINMODE_SHIFT; > + if (!mode) > + seq_puts(s, "GPIO "); > + else > + seq_printf(s, "mode %d ", mode); > + > + seq_printf(s, "0x%08x", value); > +} > + > +static const struct pinctrl_ops mrfld_pinctrl_ops = { > + .get_groups_count = mrfld_get_groups_count, > + .get_group_name = mrfld_get_group_name, > + .get_group_pins = mrfld_get_group_pins, > + .pin_dbg_show = mrfld_pin_dbg_show, > +}; > + > +static int mrfld_get_functions_count(struct pinctrl_dev *pctldev) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + > + return mp->soc->nfunctions; > +} > + > +static const char *mrfld_get_function_name(struct pinctrl_dev *pctldev, > + unsigned function) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + > + return mp->soc->functions[function].name; > +} > + > +static int mrfld_get_function_groups(struct pinctrl_dev *pctldev, > + unsigned function, > + const char * const **groups, > + unsigned * const ngroups) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + > + *groups = mp->soc->functions[function].groups; > + *ngroups = mp->soc->functions[function].ngroups; > + return 0; > +} > + > +static int mrfld_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned function, > + unsigned group) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + const struct intel_pingroup *grp = &mp->soc->groups[group]; > + unsigned long flags; > + unsigned int i; > + > + spin_lock_irqsave(&mp->lock, flags); If you ever need to call the backing pinctrl functions from irqchip driver, please use raw_spinlock instead. > + > + /* > + * All pins in the groups needs to be accessible and writable > + * before we can enable the mux for this group. > + */ > + for (i = 0; i < grp->npins; i++) { > + if (!mrfld_buf_available(mp, grp->pins[i])) { > + spin_unlock_irqrestore(&mp->lock, flags); > + return -EBUSY; > + } > + } > + > + /* Now enable the mux setting for each pin in the group */ > + for (i = 0; i < grp->npins; i++) { > + void __iomem *bufcfg; > + u32 value; > + > + bufcfg = mrfld_get_bufcfg(mp, grp->pins[i]); > + value = readl(bufcfg); > + > + value &= ~BUFCFG_PINMODE_MASK; > + value |= grp->mode << BUFCFG_PINMODE_SHIFT; > + > + writel(value, bufcfg); > + } > + > + spin_unlock_irqrestore(&mp->lock, flags); > + > + return 0; > +} > + > +static int mrfld_gpio_request_enable(struct pinctrl_dev *pctldev, > + struct pinctrl_gpio_range *range, > + unsigned pin) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + void __iomem *bufcfg; > + unsigned long flags; > + u32 value; > + > + spin_lock_irqsave(&mp->lock, flags); > + > + if (!mrfld_buf_available(mp, pin)) { > + spin_unlock_irqrestore(&mp->lock, flags); > + return -EBUSY; > + } > + > + bufcfg = mrfld_get_bufcfg(mp, pin); > + value = readl(bufcfg); > + > + /* Put the pad into GPIO mode */ > + value &= ~BUFCFG_PINMODE_MASK; > + > + writel(value, bufcfg); > + > + spin_unlock_irqrestore(&mp->lock, flags); > + > + return 0; > +} > + > +static const struct pinmux_ops mrfld_pinmux_ops = { > + .get_functions_count = mrfld_get_functions_count, > + .get_function_name = mrfld_get_function_name, > + .get_function_groups = mrfld_get_function_groups, > + .set_mux = mrfld_pinmux_set_mux, > + .gpio_request_enable = mrfld_gpio_request_enable, > +}; > + > +static int mrfld_config_get(struct pinctrl_dev *pctldev, unsigned pin, > + unsigned long *config) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + enum pin_config_param param = pinconf_to_config_param(*config); > + u32 value, term; > + u16 arg = 0; > + > + if (!mrfld_buf_available(mp, pin)) > + return -ENOTSUPP; > + > + value = readl(mrfld_get_bufcfg(mp, pin)); > + term = (value & BUFCFG_PUPD_VAL_MASK) >> BUFCFG_PUPD_VAL_SHIFT; > + > + switch (param) { > + case PIN_CONFIG_BIAS_DISABLE: > + if (value & (BUFCFG_PU_EN | BUFCFG_PD_EN)) > + return -EINVAL; > + break; > + > + case PIN_CONFIG_BIAS_PULL_UP: > + if (!(value & BUFCFG_PU_EN)) > + return -EINVAL; > + > + switch (term) { > + case BUFCFG_PUPD_VAL_910: > + arg = 910; > + break; > + case BUFCFG_PUPD_VAL_2K: > + arg = 2000; > + break; > + case BUFCFG_PUPD_VAL_20K: > + arg = 20000; > + break; > + case BUFCFG_PUPD_VAL_50K: > + arg = 50000; > + break; > + } > + > + break; > + > + case PIN_CONFIG_BIAS_PULL_DOWN: > + if (!(value & BUFCFG_PD_EN)) > + return -EINVAL; > + > + switch (term) { > + case BUFCFG_PUPD_VAL_910: > + arg = 910; > + break; > + case BUFCFG_PUPD_VAL_2K: > + arg = 2000; > + break; > + case BUFCFG_PUPD_VAL_20K: > + arg = 20000; > + break; > + case BUFCFG_PUPD_VAL_50K: > + arg = 50000; > + break; > + } > + > + break; > + > + case PIN_CONFIG_DRIVE_OPEN_DRAIN: > + if (!(value & BUFCFG_OD_EN)) > + return -EINVAL; > + break; > + > + default: > + return -ENOTSUPP; > + } > + > + *config = pinconf_to_config_packed(param, arg); > + return 0; > +} > + > +static int mrfld_config_set_pull(struct mrfld_pinctrl *mp, unsigned pin, > + unsigned long config) > +{ > + unsigned param = pinconf_to_config_param(config); > + unsigned arg = pinconf_to_config_argument(config); > + void __iomem *bufcfg; > + unsigned long flags; > + int ret = 0; > + u32 value; > + > + spin_lock_irqsave(&mp->lock, flags); > + > + bufcfg = mrfld_get_bufcfg(mp, pin); > + value = readl(bufcfg); > + > + switch (param) { > + case PIN_CONFIG_BIAS_DISABLE: > + value &= ~(BUFCFG_PU_EN | BUFCFG_PD_EN | BUFCFG_PUPD_VAL_MASK); > + break; > + > + case PIN_CONFIG_BIAS_PULL_UP: > + value &= ~(BUFCFG_PU_EN | BUFCFG_PD_EN | BUFCFG_PUPD_VAL_MASK); > + value |= BUFCFG_PU_EN; > + > + switch (arg) { > + case 50000: > + value |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT; > + break; > + case 20000: > + value |= BUFCFG_PUPD_VAL_20K << BUFCFG_PUPD_VAL_SHIFT; > + break; > + case 2000: > + value |= BUFCFG_PUPD_VAL_2K << BUFCFG_PUPD_VAL_SHIFT; > + break; > + case 910: > + value |= BUFCFG_PUPD_VAL_910 << BUFCFG_PUPD_VAL_SHIFT; > + break; > + default: > + ret = -EINVAL; > + } > + > + break; > + > + case PIN_CONFIG_BIAS_PULL_DOWN: > + value &= ~(BUFCFG_PU_EN | BUFCFG_PD_EN | BUFCFG_PUPD_VAL_MASK); > + value |= BUFCFG_PD_EN; > + > + switch (arg) { > + case 50000: > + value |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT; > + break; > + case 20000: > + value |= BUFCFG_PUPD_VAL_20K << BUFCFG_PUPD_VAL_SHIFT; > + break; > + case 2000: > + value |= BUFCFG_PUPD_VAL_2K << BUFCFG_PUPD_VAL_SHIFT; > + break; > + case 910: > + value |= BUFCFG_PUPD_VAL_910 << BUFCFG_PUPD_VAL_SHIFT; > + break; > + default: > + ret = -EINVAL; > + } > + > + break; > + > + case PIN_CONFIG_DRIVE_OPEN_DRAIN: > + if (arg) > + value |= BUFCFG_OD_EN; > + else > + value &= ~BUFCFG_OD_EN; > + break; > + } > + > + if (ret == 0) > + writel(value, bufcfg); > + > + spin_unlock_irqrestore(&mp->lock, flags); > + return 0; > +} > + > +static int mrfld_config_set(struct pinctrl_dev *pctldev, unsigned pin, > + unsigned long *configs, unsigned nconfigs) > +{ > + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); > + unsigned int i; > + int ret; > + > + for (i = 0; i < nconfigs; i++) { > + switch (pinconf_to_config_param(configs[i])) { > + case PIN_CONFIG_BIAS_DISABLE: > + case PIN_CONFIG_BIAS_PULL_UP: > + case PIN_CONFIG_BIAS_PULL_DOWN: > + case PIN_CONFIG_DRIVE_OPEN_DRAIN: > + ret = mrfld_config_set_pull(mp, pin, configs[i]); > + if (ret) > + return ret; > + break; > + > + default: > + return -ENOTSUPP; > + } > + } > + > + return 0; > +} > + > +static const struct pinconf_ops mrfld_pinconf_ops = { > + .is_generic = true, > + .pin_config_get = mrfld_config_get, > + .pin_config_set = mrfld_config_set, > +}; > + > +static const struct pinctrl_desc mrfld_pinctrl_desc = { > + .pctlops = &mrfld_pinctrl_ops, > + .pmxops = &mrfld_pinmux_ops, > + .confops = &mrfld_pinconf_ops, > + .owner = THIS_MODULE, > +}; > + > +static int mrfld_pinctrl_probe(struct platform_device *pdev) > +{ > + const struct mrfld_pinctrl_soc_data *soc = &mrfld_soc_data; > + struct mrfld_pinctrl *mp; > + struct resource *mem; > + void __iomem *regs; > + unsigned int i; > + > + mp = devm_kzalloc(&pdev->dev, sizeof(*mp), GFP_KERNEL); > + if (!mp) > + return -ENOMEM; > + > + mp->dev = &pdev->dev; > + mp->soc = soc; > + spin_lock_init(&mp->lock); > + > + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + regs = devm_ioremap_resource(&pdev->dev, mem); > + if (IS_ERR(regs)) > + return PTR_ERR(regs); > + > + /* > + * Make a copy of the families which we can use to hold pointers > + * to the registers. > + */ > + mp->nfamilies = mp->soc->nfamilies; > + mp->families = devm_kmemdup(&pdev->dev, mp->soc->families, > + mp->nfamilies * sizeof(*mp->soc->families), > + GFP_KERNEL); > + if (!mp->families) > + return -ENOMEM; > + > + /* Splice memory resource by chunk per family */ > + for (i = 0; i < mp->nfamilies; i++) { > + struct mrfld_family *family = &mp->families[i]; > + > + family->regs = regs + family->barno * MRFLD_FAMILY_LEN; > + } > + > + mp->pctldesc = mrfld_pinctrl_desc; > + mp->pctldesc.name = dev_name(&pdev->dev); > + mp->pctldesc.pins = mp->soc->pins; > + mp->pctldesc.npins = mp->soc->npins; > + > + mp->pctldev = devm_pinctrl_register(&pdev->dev, &mp->pctldesc, mp); > + if (IS_ERR(mp->pctldev)) { > + dev_err(&pdev->dev, "failed to register pinctrl driver\n"); > + return PTR_ERR(mp->pctldev); > + } > + > + platform_set_drvdata(pdev, mp); > + return 0; > +} > + > +static int mrfld_pinctrl_remove(struct platform_device *pdev) > +{ > + return 0; > +} Is this really needed? > + > +static struct platform_driver mrfld_pinctrl_driver = { > + .probe = mrfld_pinctrl_probe, > + .remove = mrfld_pinctrl_remove, > + .driver = { > + .name = "merrifield-pinctrl", > + }, > +}; > + > +static int __init mrfld_pinctrl_init(void) > +{ > + return platform_driver_register(&mrfld_pinctrl_driver); > +} > +subsys_initcall(mrfld_pinctrl_init); > + > +static void __exit mrfld_pinctrl_exit(void) > +{ > + platform_driver_unregister(&mrfld_pinctrl_driver); > +} > +module_exit(mrfld_pinctrl_exit); > + > +MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>"); > +MODULE_DESCRIPTION("Intel Merrifield SoC FLIS driver"); pinctrl > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("platform:merrifield-pinctrl"); > -- > 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 2016-06-20 at 12:20 +0300, Mika Westerberg wrote: > On Sun, Jun 19, 2016 at 06:44:59PM +0300, Andy Shevchenko wrote: > > This driver adds pinctrl support for Intel Merrifield. The IP block > > which is > > called Family-Level Interface Shim is a separate entity in SoC. The > > GPIO driver > > (gpio-intel-mid.c) will be updated accordingly to support pinctrl > > interface. > > > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Mika, my answers below. (For the rest I agree with you and fixed that locally) > > + > > +/** > > + * struct mrfld_pinctrl_soc_data - Intel pin controller per-SoC > > configuration > > + * @name: Name of the family > > + * @pins: Array if pins this pinctrl controls > > + * @npins: Number of pins in the array > > + * @groups: Array of pin groups > > + * @ngroups: Number of groups in the array > > + * @functions: Array of functions > > + * @nfunctions: Number of functions in the array > > + * @families: Array of families this pinctrl handles > > + * @nfamilies: Number of families in the array > > + * > > + * The @families is used as a template by the core driver. It will > > make > > + * copy of all families and fill in rest of the information. > > + */ > > +struct mrfld_pinctrl_soc_data { > > + const char *name; > > + const struct pinctrl_pin_desc *pins; > > + size_t npins; > > + const struct intel_pingroup *groups; > > + size_t ngroups; > > + const struct intel_function *functions; > > + size_t nfunctions; > > + const struct mrfld_family *families; > > + size_t nfamilies; > > +}; > > + > > +static const struct mrfld_pinctrl_soc_data mrfld_soc_data = { > > + .pins = mrfld_pins, > > + .npins = ARRAY_SIZE(mrfld_pins), > > + .groups = mrfld_groups, > > + .ngroups = ARRAY_SIZE(mrfld_groups), > > + .functions = mrfld_functions, > > + .nfunctions = ARRAY_SIZE(mrfld_functions), > > + .families = mrfld_families, > > + .nfamilies = ARRAY_SIZE(mrfld_families), > > +}; > > + > > These are pointless. There can be only one kind of SoC data in > Merrifield so please drop these. See for example pinctrl-cherryview.c. I didn't quite get what should I look for? In mentioned driver we have struct chv_community which contains same fields. IIRC I took it from exactly that driver. > +static int mrfld_pinmux_set_mux(struct pinctrl_dev *pctldev, > > unsigned function, > > + unsigned group) > > +{ > > + struct mrfld_pinctrl *mp = > > pinctrl_dev_get_drvdata(pctldev); > > + const struct intel_pingroup *grp = &mp->soc->groups[group]; > > + unsigned long flags; > > + unsigned int i; > > + > > + spin_lock_irqsave(&mp->lock, flags); > > If you ever need to call the backing pinctrl functions from irqchip > driver, please use raw_spinlock instead. Frankly speaking I dunno. How may I check this? > +static int mrfld_pinctrl_remove(struct platform_device *pdev) > > +{ > > + return 0; > > +} > > Is this really needed? Not for now. I hope we still may remove module without this callback in place. At least that's how I read __device_release_driver().
On Tue, Jun 21, 2016 at 04:04:21PM +0300, Andy Shevchenko wrote: > On Mon, 2016-06-20 at 12:20 +0300, Mika Westerberg wrote: > > On Sun, Jun 19, 2016 at 06:44:59PM +0300, Andy Shevchenko wrote: > > > This driver adds pinctrl support for Intel Merrifield. The IP block > > > which is > > > called Family-Level Interface Shim is a separate entity in SoC. The > > > GPIO driver > > > (gpio-intel-mid.c) will be updated accordingly to support pinctrl > > > interface. > > > > > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > Mika, my answers below. (For the rest I agree with you and fixed that > locally) > > > > + > > > +/** > > > + * struct mrfld_pinctrl_soc_data - Intel pin controller per-SoC > > > configuration > > > + * @name: Name of the family > > > + * @pins: Array if pins this pinctrl controls > > > + * @npins: Number of pins in the array > > > + * @groups: Array of pin groups > > > + * @ngroups: Number of groups in the array > > > + * @functions: Array of functions > > > + * @nfunctions: Number of functions in the array > > > + * @families: Array of families this pinctrl handles > > > + * @nfamilies: Number of families in the array > > > + * > > > + * The @families is used as a template by the core driver. It will > > > make > > > + * copy of all families and fill in rest of the information. > > > + */ > > > +struct mrfld_pinctrl_soc_data { > > > + const char *name; > > > + const struct pinctrl_pin_desc *pins; > > > + size_t npins; > > > + const struct intel_pingroup *groups; > > > + size_t ngroups; > > > + const struct intel_function *functions; > > > + size_t nfunctions; > > > + const struct mrfld_family *families; > > > + size_t nfamilies; > > > +}; > > > + > > > +static const struct mrfld_pinctrl_soc_data mrfld_soc_data = { > > > + .pins = mrfld_pins, > > > + .npins = ARRAY_SIZE(mrfld_pins), > > > + .groups = mrfld_groups, > > > + .ngroups = ARRAY_SIZE(mrfld_groups), > > > + .functions = mrfld_functions, > > > + .nfunctions = ARRAY_SIZE(mrfld_functions), > > > + .families = mrfld_families, > > > + .nfamilies = ARRAY_SIZE(mrfld_families), > > > +}; > > > + > > > > These are pointless. There can be only one kind of SoC data in > > Merrifield so please drop these. See for example pinctrl-cherryview.c. > > I didn't quite get what should I look for? In mentioned driver we have > struct chv_community which contains same fields. IIRC I took it from > exactly that driver. There is no unnecessary soc_data in pinctrl-cherryview.c. > > +static int mrfld_pinmux_set_mux(struct pinctrl_dev *pctldev, > > > unsigned function, > > > + unsigned group) > > > +{ > > > + struct mrfld_pinctrl *mp = > > > pinctrl_dev_get_drvdata(pctldev); > > > + const struct intel_pingroup *grp = &mp->soc->groups[group]; > > > + unsigned long flags; > > > + unsigned int i; > > > + > > > + spin_lock_irqsave(&mp->lock, flags); > > > > If you ever need to call the backing pinctrl functions from irqchip > > driver, please use raw_spinlock instead. > > Frankly speaking I dunno. How may I check this? If the GPIO driver calling to this pinctrl is implementing irqchip then most probably you need to use raw_spinlock. -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pinctrl/intel/Kconfig b/drivers/pinctrl/intel/Kconfig index 1c74e03..7ad5901 100644 --- a/drivers/pinctrl/intel/Kconfig +++ b/drivers/pinctrl/intel/Kconfig @@ -29,6 +29,17 @@ config PINCTRL_CHERRYVIEW Cherryview/Braswell pinctrl driver provides an interface that allows configuring of SoC pins and using them as GPIOs. +config PINCTRL_MERRIFIELD + tristate "Intel Merrifield FLIS driver" + depends on X86_INTEL_MID + select PINMUX + select PINCONF + select GENERIC_PINCONF + help + Merrifield Family-Level Interface Shim (FLIS) driver provides an + interface that allows configuring of SoC pins and using them as + GPIOs. + config PINCTRL_INTEL tristate select PINMUX diff --git a/drivers/pinctrl/intel/Makefile b/drivers/pinctrl/intel/Makefile index 03bc68e..3080307 100644 --- a/drivers/pinctrl/intel/Makefile +++ b/drivers/pinctrl/intel/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o obj-$(CONFIG_PINCTRL_CHERRYVIEW) += pinctrl-cherryview.o +obj-$(CONFIG_PINCTRL_MERRIFIELD) += pinctrl-merrifield.o obj-$(CONFIG_PINCTRL_INTEL) += pinctrl-intel.o obj-$(CONFIG_PINCTRL_BROXTON) += pinctrl-broxton.o obj-$(CONFIG_PINCTRL_SUNRISEPOINT) += pinctrl-sunrisepoint.o diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c b/drivers/pinctrl/intel/pinctrl-merrifield.c new file mode 100644 index 0000000..b49af3b --- /dev/null +++ b/drivers/pinctrl/intel/pinctrl-merrifield.c @@ -0,0 +1,908 @@ +/* + * Intel Merrifield SoC Family-Level Interface Shim (FLIS) driver + * + * Copyright (C) 2016, Intel Corporation + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + +#include "pinctrl-intel.h" + +#define MRFLD_FAMILY_NR 64 +#define MRFLD_FAMILY_LEN 0x400 + +#define SLEW_OFFSET 0x000 +#define BUFCFG_OFFSET 0x100 +#define MISC_OFFSET 0x300 + +#define BUFCFG_PINMODE_SHIFT 0 +#define BUFCFG_PINMODE_MASK GENMASK(2, 0) +#define BUFCFG_PUPD_VAL_SHIFT 4 +#define BUFCFG_PUPD_VAL_MASK GENMASK(5, 4) +#define BUFCFG_PUPD_VAL_2K 0 +#define BUFCFG_PUPD_VAL_20K 1 +#define BUFCFG_PUPD_VAL_50K 2 +#define BUFCFG_PUPD_VAL_910 3 +#define BUFCFG_PU_EN BIT(8) +#define BUFCFG_PD_EN BIT(9) +#define BUFCFG_OD_EN BIT(21) + +/** + * struct mrfld_family - Intel pin family description + * @barno: MMIO BAR number where registers for this family reside + * @pin_base: Starting pin of pins in this family + * @npins: Number of pins in this family + * @protected: True if family is protected by access + * @regs: family specific common registers + */ +struct mrfld_family { + unsigned barno; + unsigned pin_base; + size_t npins; + bool protected; + void __iomem *regs; +}; + +#define MRFLD_FAMILY(b, s, e) \ + { \ + .barno = (b), \ + .pin_base = (s), \ + .npins = (e) - (s) + 1, \ + } + +#define MRFLD_FAMILY_PROTECTED(b, s, e) \ + { \ + .barno = (b), \ + .pin_base = (s), \ + .npins = (e) - (s) + 1, \ + .protected = true, \ + } + +static const struct pinctrl_pin_desc mrfld_pins[] = { + /* Family 0: OCP2SSC (0 pins) */ + /* Family 1: ULPI (13 pins) */ + PINCTRL_PIN(0, "USB_ULPI_0_CLK"), + PINCTRL_PIN(1, "USB_ULPI_0_DATA_0"), + PINCTRL_PIN(2, "USB_ULPI_0_DATA_1"), + PINCTRL_PIN(3, "USB_ULPI_0_DATA_2"), + PINCTRL_PIN(4, "USB_ULPI_0_DATA_3"), + PINCTRL_PIN(5, "USB_ULPI_0_DATA_4"), + PINCTRL_PIN(6, "USB_ULPI_0_DATA_5"), + PINCTRL_PIN(7, "USB_ULPI_0_DATA_6"), + PINCTRL_PIN(8, "USB_ULPI_0_DATA_7"), + PINCTRL_PIN(9, "USB_ULPI_0_DIR"), + PINCTRL_PIN(10, "USB_ULPI_0_NXT"), + PINCTRL_PIN(11, "USB_ULPI_0_REFCLK"), + PINCTRL_PIN(12, "USB_ULPI_0_STP"), + /* Family 2: eMMC (24 pins) */ + PINCTRL_PIN(13, "EMMC_0_CLK"), + PINCTRL_PIN(14, "EMMC_0_CMD"), + PINCTRL_PIN(15, "EMMC_0_D_0"), + PINCTRL_PIN(16, "EMMC_0_D_1"), + PINCTRL_PIN(17, "EMMC_0_D_2"), + PINCTRL_PIN(18, "EMMC_0_D_3"), + PINCTRL_PIN(19, "EMMC_0_D_4"), + PINCTRL_PIN(20, "EMMC_0_D_5"), + PINCTRL_PIN(21, "EMMC_0_D_6"), + PINCTRL_PIN(22, "EMMC_0_D_7"), + PINCTRL_PIN(23, "EMMC_0_RST_B"), + PINCTRL_PIN(24, "GP_EMMC_1_CLK"), + PINCTRL_PIN(25, "GP_EMMC_1_CMD"), + PINCTRL_PIN(26, "GP_EMMC_1_D_0"), + PINCTRL_PIN(27, "GP_EMMC_1_D_1"), + PINCTRL_PIN(28, "GP_EMMC_1_D_2"), + PINCTRL_PIN(29, "GP_EMMC_1_D_3"), + PINCTRL_PIN(30, "GP_EMMC_1_D_4"), + PINCTRL_PIN(31, "GP_EMMC_1_D_5"), + PINCTRL_PIN(32, "GP_EMMC_1_D_6"), + PINCTRL_PIN(33, "GP_EMMC_1_D_7"), + PINCTRL_PIN(34, "GP_EMMC_1_RST_B"), + PINCTRL_PIN(35, "GP_28"), + PINCTRL_PIN(36, "GP_29"), + /* Family 3: SDIO (20 pins) */ + PINCTRL_PIN(37, "GP_SDIO_0_CD_B"), + PINCTRL_PIN(38, "GP_SDIO_0_CLK"), + PINCTRL_PIN(39, "GP_SDIO_0_CMD"), + PINCTRL_PIN(40, "GP_SDIO_0_DAT_0"), + PINCTRL_PIN(41, "GP_SDIO_0_DAT_1"), + PINCTRL_PIN(42, "GP_SDIO_0_DAT_2"), + PINCTRL_PIN(43, "GP_SDIO_0_DAT_3"), + PINCTRL_PIN(44, "GP_SDIO_0_LVL_CLK_FB"), + PINCTRL_PIN(45, "GP_SDIO_0_LVL_CMD_DIR"), + PINCTRL_PIN(46, "GP_SDIO_0_LVL_DAT_DIR"), + PINCTRL_PIN(47, "GP_SDIO_0_LVL_SEL"), + PINCTRL_PIN(48, "GP_SDIO_0_POWERDOWN_B"), + PINCTRL_PIN(49, "GP_SDIO_0_WP"), + PINCTRL_PIN(50, "GP_SDIO_1_CLK"), + PINCTRL_PIN(51, "GP_SDIO_1_CMD"), + PINCTRL_PIN(52, "GP_SDIO_1_DAT_0"), + PINCTRL_PIN(53, "GP_SDIO_1_DAT_1"), + PINCTRL_PIN(54, "GP_SDIO_1_DAT_2"), + PINCTRL_PIN(55, "GP_SDIO_1_DAT_3"), + PINCTRL_PIN(56, "GP_SDIO_1_POWERDOWN_B"), + /* Family 4: HSI (8 pins) */ + PINCTRL_PIN(57, "MHSI_ACDATA"), + PINCTRL_PIN(58, "MHSI_ACFLAG"), + PINCTRL_PIN(59, "MHSI_ACREADY"), + PINCTRL_PIN(60, "MHSI_ACWAKE"), + PINCTRL_PIN(61, "MHSI_CADATA"), + PINCTRL_PIN(62, "MHSI_CAFLAG"), + PINCTRL_PIN(63, "MHSI_CAREADY"), + PINCTRL_PIN(64, "MHSI_CAWAKE"), + /* Family 5: SSP Audio (14 pins) */ + PINCTRL_PIN(65, "GP_MSLIM_0_BCLK"), + PINCTRL_PIN(66, "GP_MSLIM_0_BDAT"), + PINCTRL_PIN(67, "GP_SSP_0_CLK"), + PINCTRL_PIN(68, "GP_SSP_0_FS"), + PINCTRL_PIN(69, "GP_SSP_0_RXD"), + PINCTRL_PIN(70, "GP_SSP_0_TXD"), + PINCTRL_PIN(71, "GP_SSP_1_CLK"), + PINCTRL_PIN(72, "GP_SSP_1_FS"), + PINCTRL_PIN(73, "GP_SSP_1_RXD"), + PINCTRL_PIN(74, "GP_SSP_1_TXD"), + PINCTRL_PIN(75, "GP_SSP_2_CLK"), + PINCTRL_PIN(76, "GP_SSP_2_FS"), + PINCTRL_PIN(77, "GP_SSP_2_RXD"), + PINCTRL_PIN(78, "GP_SSP_2_TXD"), + /* Family 6: GP SSP (22 pins) */ + PINCTRL_PIN(79, "GP_SSP_3_CLK"), + PINCTRL_PIN(80, "GP_SSP_3_FS"), + PINCTRL_PIN(81, "GP_SSP_3_RXD"), + PINCTRL_PIN(82, "GP_SSP_3_TXD"), + PINCTRL_PIN(83, "GP_SSP_4_CLK"), + PINCTRL_PIN(84, "GP_SSP_4_FS_0"), + PINCTRL_PIN(85, "GP_SSP_4_FS_1"), + PINCTRL_PIN(86, "GP_SSP_4_FS_2"), + PINCTRL_PIN(87, "GP_SSP_4_FS_3"), + PINCTRL_PIN(88, "GP_SSP_4_RXD"), + PINCTRL_PIN(89, "GP_SSP_4_TXD"), + PINCTRL_PIN(90, "GP_SSP_5_CLK"), + PINCTRL_PIN(91, "GP_SSP_5_FS_0"), + PINCTRL_PIN(92, "GP_SSP_5_FS_1"), + PINCTRL_PIN(93, "GP_SSP_5_FS_2"), + PINCTRL_PIN(94, "GP_SSP_5_FS_3"), + PINCTRL_PIN(95, "GP_SSP_5_RXD"), + PINCTRL_PIN(96, "GP_SSP_5_TXD"), + PINCTRL_PIN(97, "GP_SSP_6_CLK"), + PINCTRL_PIN(98, "GP_SSP_6_FS"), + PINCTRL_PIN(99, "GP_SSP_6_RXD"), + PINCTRL_PIN(100, "GP_SSP_6_TXD"), + /* Family 7: I2C (14 pins) */ + PINCTRL_PIN(101, "GP_I2C_1_SCL"), + PINCTRL_PIN(102, "GP_I2C_1_SDA"), + PINCTRL_PIN(103, "GP_I2C_2_SCL"), + PINCTRL_PIN(104, "GP_I2C_2_SDA"), + PINCTRL_PIN(105, "GP_I2C_3_SCL"), + PINCTRL_PIN(106, "GP_I2C_3_SDA"), + PINCTRL_PIN(107, "GP_I2C_4_SCL"), + PINCTRL_PIN(108, "GP_I2C_4_SDA"), + PINCTRL_PIN(109, "GP_I2C_5_SCL"), + PINCTRL_PIN(110, "GP_I2C_5_SDA"), + PINCTRL_PIN(111, "GP_I2C_6_SCL"), + PINCTRL_PIN(112, "GP_I2C_6_SDA"), + PINCTRL_PIN(113, "GP_I2C_7_SCL"), + PINCTRL_PIN(114, "GP_I2C_7_SDA"), + /* Family 8: UART (12 pins) */ + PINCTRL_PIN(115, "GP_UART_0_CTS"), + PINCTRL_PIN(116, "GP_UART_0_RTS"), + PINCTRL_PIN(117, "GP_UART_0_RX"), + PINCTRL_PIN(118, "GP_UART_0_TX"), + PINCTRL_PIN(119, "GP_UART_1_CTS"), + PINCTRL_PIN(120, "GP_UART_1_RTS"), + PINCTRL_PIN(121, "GP_UART_1_RX"), + PINCTRL_PIN(122, "GP_UART_1_TX"), + PINCTRL_PIN(123, "GP_UART_2_CTS"), + PINCTRL_PIN(124, "GP_UART_2_RTS"), + PINCTRL_PIN(125, "GP_UART_2_RX"), + PINCTRL_PIN(126, "GP_UART_2_TX"), + /* Family 9: GPIO South (19 pins) */ + PINCTRL_PIN(127, "GP_13"), + PINCTRL_PIN(128, "GP_14"), + PINCTRL_PIN(129, "GP_15"), + PINCTRL_PIN(130, "GP_16"), + PINCTRL_PIN(131, "GP_17"), + PINCTRL_PIN(132, "GP_18"), + PINCTRL_PIN(133, "GP_19"), + PINCTRL_PIN(134, "GP_20"), + PINCTRL_PIN(135, "GP_21"), + PINCTRL_PIN(136, "GP_22"), + PINCTRL_PIN(137, "GP_23"), + PINCTRL_PIN(138, "GP_24"), + PINCTRL_PIN(139, "GP_25"), + PINCTRL_PIN(140, "GP_FAST_INT_0"), + PINCTRL_PIN(141, "GP_FAST_INT_1"), + PINCTRL_PIN(142, "GP_FAST_INT_2"), + PINCTRL_PIN(143, "GP_FAST_INT_3"), + PINCTRL_PIN(144, "GP_PWM_0"), + PINCTRL_PIN(145, "GP_PWM_1"), + /* Family 10: Camera Sideband (12 pins) */ + PINCTRL_PIN(146, "GP_CAMERASB_0"), + PINCTRL_PIN(147, "GP_CAMERASB_1"), + PINCTRL_PIN(148, "GP_CAMERASB_2"), + PINCTRL_PIN(149, "GP_CAMERASB_3"), + PINCTRL_PIN(150, "GP_CAMERASB_4"), + PINCTRL_PIN(151, "GP_CAMERASB_5"), + PINCTRL_PIN(152, "GP_CAMERASB_6"), + PINCTRL_PIN(153, "GP_CAMERASB_7"), + PINCTRL_PIN(154, "GP_CAMERASB_8"), + PINCTRL_PIN(155, "GP_CAMERASB_9"), + PINCTRL_PIN(156, "GP_CAMERASB_10"), + PINCTRL_PIN(157, "GP_CAMERASB_11"), + /* Family 11: Clock (22 pins) */ + PINCTRL_PIN(158, "GP_CLKPH_0"), + PINCTRL_PIN(159, "GP_CLKPH_1"), + PINCTRL_PIN(160, "GP_CLKPH_2"), + PINCTRL_PIN(161, "GP_CLKPH_3"), + PINCTRL_PIN(162, "GP_CLKPH_4"), + PINCTRL_PIN(163, "GP_CLKPH_5"), + PINCTRL_PIN(164, "GP_HDMI_HPD"), + PINCTRL_PIN(165, "GP_INTD_DSI_TE1"), + PINCTRL_PIN(166, "GP_INTD_DSI_TE2"), + PINCTRL_PIN(167, "OSC_CLK_CTRL_0"), + PINCTRL_PIN(168, "OSC_CLK_CTRL_1"), + PINCTRL_PIN(169, "OSC_CLK_OUT_0"), + PINCTRL_PIN(170, "OSC_CLK_OUT_1"), + PINCTRL_PIN(171, "OSC_CLK_OUT_2"), + PINCTRL_PIN(172, "OSC_CLK_OUT_3"), + PINCTRL_PIN(173, "OSC_CLK_OUT_4"), + PINCTRL_PIN(174, "RESETOUT_B"), + PINCTRL_PIN(175, "XXPMODE"), + PINCTRL_PIN(176, "XXPRDY"), + PINCTRL_PIN(177, "XXPREQ_B"), + PINCTRL_PIN(178, "GP_26"), + PINCTRL_PIN(179, "GP_27"), + /* Family 12: MSIC (15 pins) */ + PINCTRL_PIN(180, "I2C_0_SCL"), + PINCTRL_PIN(181, "I2C_0_SDA"), + PINCTRL_PIN(182, "IERR_B"), + PINCTRL_PIN(183, "JTAG_TCKC"), + PINCTRL_PIN(184, "JTAG_TDIC"), + PINCTRL_PIN(185, "JTAG_TDOC"), + PINCTRL_PIN(186, "JTAG_TMSC"), + PINCTRL_PIN(187, "JTAG_TRST_B"), + PINCTRL_PIN(188, "PROCHOT_B"), + PINCTRL_PIN(189, "RTC_CLK"), + PINCTRL_PIN(190, "SVID_ALERT_B"), + PINCTRL_PIN(191, "SVID_VCLK"), + PINCTRL_PIN(192, "SVID_VDIO"), + PINCTRL_PIN(193, "THERMTRIP_B"), + PINCTRL_PIN(194, "STANDBY"), + /* Family 13: Keyboard (20 pins) */ + PINCTRL_PIN(195, "GP_KBD_DKIN_0"), + PINCTRL_PIN(196, "GP_KBD_DKIN_1"), + PINCTRL_PIN(197, "GP_KBD_DKIN_2"), + PINCTRL_PIN(198, "GP_KBD_DKIN_3"), + PINCTRL_PIN(199, "GP_KBD_MKIN_0"), + PINCTRL_PIN(200, "GP_KBD_MKIN_1"), + PINCTRL_PIN(201, "GP_KBD_MKIN_2"), + PINCTRL_PIN(202, "GP_KBD_MKIN_3"), + PINCTRL_PIN(203, "GP_KBD_MKIN_4"), + PINCTRL_PIN(204, "GP_KBD_MKIN_5"), + PINCTRL_PIN(205, "GP_KBD_MKIN_6"), + PINCTRL_PIN(206, "GP_KBD_MKIN_7"), + PINCTRL_PIN(207, "GP_KBD_MKOUT_0"), + PINCTRL_PIN(208, "GP_KBD_MKOUT_1"), + PINCTRL_PIN(209, "GP_KBD_MKOUT_2"), + PINCTRL_PIN(210, "GP_KBD_MKOUT_3"), + PINCTRL_PIN(211, "GP_KBD_MKOUT_4"), + PINCTRL_PIN(212, "GP_KBD_MKOUT_5"), + PINCTRL_PIN(213, "GP_KBD_MKOUT_6"), + PINCTRL_PIN(214, "GP_KBD_MKOUT_7"), + /* Family 14: GPIO North (13 pins) */ + PINCTRL_PIN(215, "GP_0"), + PINCTRL_PIN(216, "GP_1"), + PINCTRL_PIN(217, "GP_2"), + PINCTRL_PIN(218, "GP_3"), + PINCTRL_PIN(219, "GP_4"), + PINCTRL_PIN(220, "GP_5"), + PINCTRL_PIN(221, "GP_6"), + PINCTRL_PIN(222, "GP_7"), + PINCTRL_PIN(223, "GP_8"), + PINCTRL_PIN(224, "GP_9"), + PINCTRL_PIN(225, "GP_10"), + PINCTRL_PIN(226, "GP_11"), + PINCTRL_PIN(227, "GP_12"), + /* Family 15: PTI (5 pins) */ + PINCTRL_PIN(228, "GP_MPTI_CLK"), + PINCTRL_PIN(229, "GP_MPTI_DATA_0"), + PINCTRL_PIN(230, "GP_MPTI_DATA_1"), + PINCTRL_PIN(231, "GP_MPTI_DATA_2"), + PINCTRL_PIN(232, "GP_MPTI_DATA_3"), + /* Family 16: USB3 (0 pins) */ + /* Family 17: HSIC (0 pins) */ + /* Family 18: Broadcast (0 pins) */ +}; + +static const unsigned mrfld_pwm0_pins[] = { 144 }; +static const unsigned mrfld_pwm1_pins[] = { 145 }; +static const unsigned mrfld_pwm2_pins[] = { 132 }; +static const unsigned mrfld_pwm3_pins[] = { 133 }; + +static const struct intel_pingroup mrfld_groups[] = { + PIN_GROUP("pwm0_grp", mrfld_pwm0_pins, 1), + PIN_GROUP("pwm1_grp", mrfld_pwm1_pins, 1), + PIN_GROUP("pwm2_grp", mrfld_pwm2_pins, 1), + PIN_GROUP("pwm3_grp", mrfld_pwm3_pins, 1), +}; + +static const char * const mrfld_pwm0_groups[] = { "pwm0_grp" }; +static const char * const mrfld_pwm1_groups[] = { "pwm1_grp" }; +static const char * const mrfld_pwm2_groups[] = { "pwm2_grp" }; +static const char * const mrfld_pwm3_groups[] = { "pwm3_grp" }; + +static const struct intel_function mrfld_functions[] = { + FUNCTION("pwm0", mrfld_pwm0_groups), + FUNCTION("pwm1", mrfld_pwm1_groups), + FUNCTION("pwm2", mrfld_pwm2_groups), + FUNCTION("pwm3", mrfld_pwm3_groups), +}; + +static const struct mrfld_family mrfld_families[] = { + MRFLD_FAMILY(1, 0, 12), + MRFLD_FAMILY(2, 13, 36), + MRFLD_FAMILY(3, 37, 56), + MRFLD_FAMILY(4, 57, 64), + MRFLD_FAMILY(5, 65, 78), + MRFLD_FAMILY(6, 79, 100), + MRFLD_FAMILY(7, 101, 114), + MRFLD_FAMILY(8, 115, 126), + MRFLD_FAMILY(9, 127, 145), + MRFLD_FAMILY(10, 146, 157), + MRFLD_FAMILY(11, 158, 179), + MRFLD_FAMILY_PROTECTED(12, 180, 194), + MRFLD_FAMILY(13, 195, 214), + MRFLD_FAMILY(14, 215, 227), + MRFLD_FAMILY(15, 228, 232), +}; + +/** + * struct mrfld_pinctrl_soc_data - Intel pin controller per-SoC configuration + * @name: Name of the family + * @pins: Array if pins this pinctrl controls + * @npins: Number of pins in the array + * @groups: Array of pin groups + * @ngroups: Number of groups in the array + * @functions: Array of functions + * @nfunctions: Number of functions in the array + * @families: Array of families this pinctrl handles + * @nfamilies: Number of families in the array + * + * The @families is used as a template by the core driver. It will make + * copy of all families and fill in rest of the information. + */ +struct mrfld_pinctrl_soc_data { + const char *name; + const struct pinctrl_pin_desc *pins; + size_t npins; + const struct intel_pingroup *groups; + size_t ngroups; + const struct intel_function *functions; + size_t nfunctions; + const struct mrfld_family *families; + size_t nfamilies; +}; + +static const struct mrfld_pinctrl_soc_data mrfld_soc_data = { + .pins = mrfld_pins, + .npins = ARRAY_SIZE(mrfld_pins), + .groups = mrfld_groups, + .ngroups = ARRAY_SIZE(mrfld_groups), + .functions = mrfld_functions, + .nfunctions = ARRAY_SIZE(mrfld_functions), + .families = mrfld_families, + .nfamilies = ARRAY_SIZE(mrfld_families), +}; + +/** + * struct mrfld_pinctrl - Intel Merrifield pinctrl private structure + * @dev: Pointer to the device structure + * @regs: FLIS registers + * @lock: Lock to serialize register access + * @pctldesc: Pin controller description + * @pctldev: Pointer to the pin controller device + * @soc: SoC/PCH specific pin configuration data + * @families: All families in this pin controller + * @nfamilies: Number of families in this pin controller + */ +struct mrfld_pinctrl { + struct device *dev; + void __iomem *regs; + spinlock_t lock; + struct pinctrl_desc pctldesc; + struct pinctrl_dev *pctldev; + const struct mrfld_pinctrl_soc_data *soc; + struct mrfld_family *families; + size_t nfamilies; +}; + +#define pin_to_bufno(f, p) ((p) - (f)->pin_base) + +static struct mrfld_family *mrfld_get_family(struct mrfld_pinctrl *mp, + unsigned pin) +{ + struct mrfld_family *family; + unsigned int i; + + for (i = 0; i < mp->nfamilies; i++) { + family = &mp->families[i]; + if (pin >= family->pin_base && + pin < family->pin_base + family->npins) + return family; + } + + dev_warn(mp->dev, "failed to find family for pin %u\n", pin); + return NULL; +} + +static bool mrfld_buf_available(struct mrfld_pinctrl *mp, unsigned pin) +{ + const struct mrfld_family *family; + + family = mrfld_get_family(mp, pin); + if (!family) + return false; + + return !family->protected; +} + +static void __iomem *mrfld_get_bufcfg(struct mrfld_pinctrl *mp, unsigned pin) +{ + const struct mrfld_family *family; + unsigned bufno; + + family = mrfld_get_family(mp, pin); + if (!family) + return NULL; + + bufno = pin_to_bufno(family, pin); + return family->regs + BUFCFG_OFFSET + bufno * 4; +} + +static int mrfld_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + + return mp->soc->ngroups; +} + +static const char *mrfld_get_group_name(struct pinctrl_dev *pctldev, + unsigned group) +{ + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + + return mp->soc->groups[group].name; +} + +static int mrfld_get_group_pins(struct pinctrl_dev *pctldev, unsigned group, + const unsigned **pins, unsigned *npins) +{ + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + + *pins = mp->soc->groups[group].pins; + *npins = mp->soc->groups[group].npins; + return 0; +} + +static void mrfld_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned pin) +{ + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + void __iomem *bufcfg; + u32 value, mode; + + if (!mrfld_buf_available(mp, pin)) + return; + + bufcfg = mrfld_get_bufcfg(mp, pin); + value = readl(bufcfg); + + mode = (value & BUFCFG_PINMODE_MASK) >> BUFCFG_PINMODE_SHIFT; + if (!mode) + seq_puts(s, "GPIO "); + else + seq_printf(s, "mode %d ", mode); + + seq_printf(s, "0x%08x", value); +} + +static const struct pinctrl_ops mrfld_pinctrl_ops = { + .get_groups_count = mrfld_get_groups_count, + .get_group_name = mrfld_get_group_name, + .get_group_pins = mrfld_get_group_pins, + .pin_dbg_show = mrfld_pin_dbg_show, +}; + +static int mrfld_get_functions_count(struct pinctrl_dev *pctldev) +{ + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + + return mp->soc->nfunctions; +} + +static const char *mrfld_get_function_name(struct pinctrl_dev *pctldev, + unsigned function) +{ + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + + return mp->soc->functions[function].name; +} + +static int mrfld_get_function_groups(struct pinctrl_dev *pctldev, + unsigned function, + const char * const **groups, + unsigned * const ngroups) +{ + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + + *groups = mp->soc->functions[function].groups; + *ngroups = mp->soc->functions[function].ngroups; + return 0; +} + +static int mrfld_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned function, + unsigned group) +{ + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + const struct intel_pingroup *grp = &mp->soc->groups[group]; + unsigned long flags; + unsigned int i; + + spin_lock_irqsave(&mp->lock, flags); + + /* + * All pins in the groups needs to be accessible and writable + * before we can enable the mux for this group. + */ + for (i = 0; i < grp->npins; i++) { + if (!mrfld_buf_available(mp, grp->pins[i])) { + spin_unlock_irqrestore(&mp->lock, flags); + return -EBUSY; + } + } + + /* Now enable the mux setting for each pin in the group */ + for (i = 0; i < grp->npins; i++) { + void __iomem *bufcfg; + u32 value; + + bufcfg = mrfld_get_bufcfg(mp, grp->pins[i]); + value = readl(bufcfg); + + value &= ~BUFCFG_PINMODE_MASK; + value |= grp->mode << BUFCFG_PINMODE_SHIFT; + + writel(value, bufcfg); + } + + spin_unlock_irqrestore(&mp->lock, flags); + + return 0; +} + +static int mrfld_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned pin) +{ + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + void __iomem *bufcfg; + unsigned long flags; + u32 value; + + spin_lock_irqsave(&mp->lock, flags); + + if (!mrfld_buf_available(mp, pin)) { + spin_unlock_irqrestore(&mp->lock, flags); + return -EBUSY; + } + + bufcfg = mrfld_get_bufcfg(mp, pin); + value = readl(bufcfg); + + /* Put the pad into GPIO mode */ + value &= ~BUFCFG_PINMODE_MASK; + + writel(value, bufcfg); + + spin_unlock_irqrestore(&mp->lock, flags); + + return 0; +} + +static const struct pinmux_ops mrfld_pinmux_ops = { + .get_functions_count = mrfld_get_functions_count, + .get_function_name = mrfld_get_function_name, + .get_function_groups = mrfld_get_function_groups, + .set_mux = mrfld_pinmux_set_mux, + .gpio_request_enable = mrfld_gpio_request_enable, +}; + +static int mrfld_config_get(struct pinctrl_dev *pctldev, unsigned pin, + unsigned long *config) +{ + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(*config); + u32 value, term; + u16 arg = 0; + + if (!mrfld_buf_available(mp, pin)) + return -ENOTSUPP; + + value = readl(mrfld_get_bufcfg(mp, pin)); + term = (value & BUFCFG_PUPD_VAL_MASK) >> BUFCFG_PUPD_VAL_SHIFT; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + if (value & (BUFCFG_PU_EN | BUFCFG_PD_EN)) + return -EINVAL; + break; + + case PIN_CONFIG_BIAS_PULL_UP: + if (!(value & BUFCFG_PU_EN)) + return -EINVAL; + + switch (term) { + case BUFCFG_PUPD_VAL_910: + arg = 910; + break; + case BUFCFG_PUPD_VAL_2K: + arg = 2000; + break; + case BUFCFG_PUPD_VAL_20K: + arg = 20000; + break; + case BUFCFG_PUPD_VAL_50K: + arg = 50000; + break; + } + + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + if (!(value & BUFCFG_PD_EN)) + return -EINVAL; + + switch (term) { + case BUFCFG_PUPD_VAL_910: + arg = 910; + break; + case BUFCFG_PUPD_VAL_2K: + arg = 2000; + break; + case BUFCFG_PUPD_VAL_20K: + arg = 20000; + break; + case BUFCFG_PUPD_VAL_50K: + arg = 50000; + break; + } + + break; + + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + if (!(value & BUFCFG_OD_EN)) + return -EINVAL; + break; + + default: + return -ENOTSUPP; + } + + *config = pinconf_to_config_packed(param, arg); + return 0; +} + +static int mrfld_config_set_pull(struct mrfld_pinctrl *mp, unsigned pin, + unsigned long config) +{ + unsigned param = pinconf_to_config_param(config); + unsigned arg = pinconf_to_config_argument(config); + void __iomem *bufcfg; + unsigned long flags; + int ret = 0; + u32 value; + + spin_lock_irqsave(&mp->lock, flags); + + bufcfg = mrfld_get_bufcfg(mp, pin); + value = readl(bufcfg); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + value &= ~(BUFCFG_PU_EN | BUFCFG_PD_EN | BUFCFG_PUPD_VAL_MASK); + break; + + case PIN_CONFIG_BIAS_PULL_UP: + value &= ~(BUFCFG_PU_EN | BUFCFG_PD_EN | BUFCFG_PUPD_VAL_MASK); + value |= BUFCFG_PU_EN; + + switch (arg) { + case 50000: + value |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT; + break; + case 20000: + value |= BUFCFG_PUPD_VAL_20K << BUFCFG_PUPD_VAL_SHIFT; + break; + case 2000: + value |= BUFCFG_PUPD_VAL_2K << BUFCFG_PUPD_VAL_SHIFT; + break; + case 910: + value |= BUFCFG_PUPD_VAL_910 << BUFCFG_PUPD_VAL_SHIFT; + break; + default: + ret = -EINVAL; + } + + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + value &= ~(BUFCFG_PU_EN | BUFCFG_PD_EN | BUFCFG_PUPD_VAL_MASK); + value |= BUFCFG_PD_EN; + + switch (arg) { + case 50000: + value |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT; + break; + case 20000: + value |= BUFCFG_PUPD_VAL_20K << BUFCFG_PUPD_VAL_SHIFT; + break; + case 2000: + value |= BUFCFG_PUPD_VAL_2K << BUFCFG_PUPD_VAL_SHIFT; + break; + case 910: + value |= BUFCFG_PUPD_VAL_910 << BUFCFG_PUPD_VAL_SHIFT; + break; + default: + ret = -EINVAL; + } + + break; + + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + if (arg) + value |= BUFCFG_OD_EN; + else + value &= ~BUFCFG_OD_EN; + break; + } + + if (ret == 0) + writel(value, bufcfg); + + spin_unlock_irqrestore(&mp->lock, flags); + return 0; +} + +static int mrfld_config_set(struct pinctrl_dev *pctldev, unsigned pin, + unsigned long *configs, unsigned nconfigs) +{ + struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + unsigned int i; + int ret; + + for (i = 0; i < nconfigs; i++) { + switch (pinconf_to_config_param(configs[i])) { + case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_DOWN: + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + ret = mrfld_config_set_pull(mp, pin, configs[i]); + if (ret) + return ret; + break; + + default: + return -ENOTSUPP; + } + } + + return 0; +} + +static const struct pinconf_ops mrfld_pinconf_ops = { + .is_generic = true, + .pin_config_get = mrfld_config_get, + .pin_config_set = mrfld_config_set, +}; + +static const struct pinctrl_desc mrfld_pinctrl_desc = { + .pctlops = &mrfld_pinctrl_ops, + .pmxops = &mrfld_pinmux_ops, + .confops = &mrfld_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int mrfld_pinctrl_probe(struct platform_device *pdev) +{ + const struct mrfld_pinctrl_soc_data *soc = &mrfld_soc_data; + struct mrfld_pinctrl *mp; + struct resource *mem; + void __iomem *regs; + unsigned int i; + + mp = devm_kzalloc(&pdev->dev, sizeof(*mp), GFP_KERNEL); + if (!mp) + return -ENOMEM; + + mp->dev = &pdev->dev; + mp->soc = soc; + spin_lock_init(&mp->lock); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + /* + * Make a copy of the families which we can use to hold pointers + * to the registers. + */ + mp->nfamilies = mp->soc->nfamilies; + mp->families = devm_kmemdup(&pdev->dev, mp->soc->families, + mp->nfamilies * sizeof(*mp->soc->families), + GFP_KERNEL); + if (!mp->families) + return -ENOMEM; + + /* Splice memory resource by chunk per family */ + for (i = 0; i < mp->nfamilies; i++) { + struct mrfld_family *family = &mp->families[i]; + + family->regs = regs + family->barno * MRFLD_FAMILY_LEN; + } + + mp->pctldesc = mrfld_pinctrl_desc; + mp->pctldesc.name = dev_name(&pdev->dev); + mp->pctldesc.pins = mp->soc->pins; + mp->pctldesc.npins = mp->soc->npins; + + mp->pctldev = devm_pinctrl_register(&pdev->dev, &mp->pctldesc, mp); + if (IS_ERR(mp->pctldev)) { + dev_err(&pdev->dev, "failed to register pinctrl driver\n"); + return PTR_ERR(mp->pctldev); + } + + platform_set_drvdata(pdev, mp); + return 0; +} + +static int mrfld_pinctrl_remove(struct platform_device *pdev) +{ + return 0; +} + +static struct platform_driver mrfld_pinctrl_driver = { + .probe = mrfld_pinctrl_probe, + .remove = mrfld_pinctrl_remove, + .driver = { + .name = "merrifield-pinctrl", + }, +}; + +static int __init mrfld_pinctrl_init(void) +{ + return platform_driver_register(&mrfld_pinctrl_driver); +} +subsys_initcall(mrfld_pinctrl_init); + +static void __exit mrfld_pinctrl_exit(void) +{ + platform_driver_unregister(&mrfld_pinctrl_driver); +} +module_exit(mrfld_pinctrl_exit); + +MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>"); +MODULE_DESCRIPTION("Intel Merrifield SoC FLIS driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:merrifield-pinctrl");
This driver adds pinctrl support for Intel Merrifield. The IP block which is called Family-Level Interface Shim is a separate entity in SoC. The GPIO driver (gpio-intel-mid.c) will be updated accordingly to support pinctrl interface. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/pinctrl/intel/Kconfig | 11 + drivers/pinctrl/intel/Makefile | 1 + drivers/pinctrl/intel/pinctrl-merrifield.c | 908 +++++++++++++++++++++++++++++ 3 files changed, 920 insertions(+) create mode 100644 drivers/pinctrl/intel/pinctrl-merrifield.c