| Message ID | e98c3f738b3a8f6755793959d89b4e43c9410fb1.1461258787.git.joabreu@synopsys.com |
|---|---|
| State | New |
| Headers | show |
Adding device tree mailing list and Rob Herring. On 21-04-2016 18:19, Jose Abreu wrote: > Add device tree bindings for AXS10X I2S PLL Clock driver. > > Signed-off-by: Jose Abreu <joabreu@synopsys.com> > --- > > Changes v5 -> v6: > * Added 'clocks' field > > This patch was only introduced in v5. > > arch/arc/boot/dts/axs10x_mb.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi > index ab5d570..5c6489e 100644 > --- a/arch/arc/boot/dts/axs10x_mb.dtsi > +++ b/arch/arc/boot/dts/axs10x_mb.dtsi > @@ -16,7 +16,20 @@ > ranges = <0x00000000 0xe0000000 0x10000000>; > interrupt-parent = <&mb_intc>; > > + i2sclk: i2sclk@100a0 { > + compatible = "snps,axs10x-i2s-pll-clock"; > + reg = <0x100a0 0x10>; > + clocks = <&i2spll_clk>; > + #clock-cells = <0>; > + }; > + > clocks { > + i2spll_clk: i2spll_clk { > + compatible = "fixed-clock"; > + clock-frequency = <27000000>; > + #clock-cells = <0>; > + }; > + > i2cclk: i2cclk { > compatible = "fixed-clock"; > clock-frequency = <50000000>;
Hi Jose, On Thu, 2016-04-21 at 18:19 +0100, Jose Abreu wrote: > Add device tree bindings for AXS10X I2S PLL Clock driver. > > Signed-off-by: Jose Abreu <joabreu@synopsys.com> > --- > > Changes v5 -> v6: > * Added 'clocks' field > > This patch was only introduced in v5. > > arch/arc/boot/dts/axs10x_mb.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi > index ab5d570..5c6489e 100644 > --- a/arch/arc/boot/dts/axs10x_mb.dtsi > +++ b/arch/arc/boot/dts/axs10x_mb.dtsi > @@ -16,7 +16,20 @@ > ranges = <0x00000000 0xe0000000 0x10000000>; > interrupt-parent = <&mb_intc>; > > + i2sclk: i2sclk@100a0 { > + compatible = "snps,axs10x-i2s-pll-clock"; > + reg = <0x100a0 0x10>; > + clocks = <&i2spll_clk>; > + #clock-cells = <0>; > + }; > + > clocks { > + i2spll_clk: i2spll_clk { > + compatible = "fixed-clock"; > + clock-frequency = <27000000>; > + #clock-cells = <0>; > + }; > + > i2cclk: i2cclk { > compatible = "fixed-clock"; > clock-frequency = <50000000>; Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
On Thursday 21 April 2016 10:49 PM, Jose Abreu wrote: > Add device tree bindings for AXS10X I2S PLL Clock driver. > > Signed-off-by: Jose Abreu <joabreu@synopsys.com> Lets worry about different firmware versions et all after basic patch is merged. I presume this patch will be merged via clk tree ? Acked-by: Vineet Gupta <vgupta@synopsys.com>
Hi Vineet, On 02-05-2016 10:39, Jose Abreu wrote: > Add device tree bindings for AXS10X I2S PLL Clock driver. > > Signed-off-by: Jose Abreu <joabreu@synopsys.com> > Acked-by: Alexey Brodkin <abrodkin@synopsys.com> > Acked-by: Vineet Gupta <vgupta@synopsys.com> > --- > > Changes v5 -> v6: > * Added 'clocks' field > > This patch was only introduced in v5. > > Cc: Carlos Palminha <palminha@synopsys.com> > Cc: Rob Herring <robh@kernel.org> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: Kumar Gala <galak@codeaurora.org> > Cc: Michael Turquette <mturquette@baylibre.com> > Cc: Stephen Boyd <sboyd@codeaurora.org> > Cc: Alexey Brodkin <abrodkin@synopsys.com> > Cc: Vineet Gupta <vgupta@synopsys.com> > Cc: linux-snps-arc@lists.infradead.org > Cc: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Cc: linux-clk@vger.kernel.org > > arch/arc/boot/dts/axs10x_mb.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi > index ab5d570..5c6489e 100644 > --- a/arch/arc/boot/dts/axs10x_mb.dtsi > +++ b/arch/arc/boot/dts/axs10x_mb.dtsi > @@ -16,7 +16,20 @@ > ranges = <0x00000000 0xe0000000 0x10000000>; > interrupt-parent = <&mb_intc>; > > + i2sclk: i2sclk@100a0 { > + compatible = "snps,axs10x-i2s-pll-clock"; > + reg = <0x100a0 0x10>; > + clocks = <&i2spll_clk>; > + #clock-cells = <0>; > + }; > + > clocks { > + i2spll_clk: i2spll_clk { > + compatible = "fixed-clock"; > + clock-frequency = <27000000>; > + #clock-cells = <0>; > + }; > + > i2cclk: i2cclk { > compatible = "fixed-clock"; > clock-frequency = <50000000>; Can you apply this to arc-next? Main driver was already merged into clk-next. We still have to check how to deal with the parent clock frequency that will change in the next firmware release. Best regards, Jose Miguel Abreu
On Monday 09 May 2016 02:42 PM, Jose Abreu wrote: > Can you apply this to arc-next? Main driver was already merged into clk-next. We > still have to check how to deal with the parent clock frequency that will change > in the next firmware release. Done ! although note that this might *not* be bisectable if this goes ahead of driver in 4.7-rc1 !
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi index ab5d570..5c6489e 100644 --- a/arch/arc/boot/dts/axs10x_mb.dtsi +++ b/arch/arc/boot/dts/axs10x_mb.dtsi @@ -16,7 +16,20 @@ ranges = <0x00000000 0xe0000000 0x10000000>; interrupt-parent = <&mb_intc>; + i2sclk: i2sclk@100a0 { + compatible = "snps,axs10x-i2s-pll-clock"; + reg = <0x100a0 0x10>; + clocks = <&i2spll_clk>; + #clock-cells = <0>; + }; + clocks { + i2spll_clk: i2spll_clk { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + }; + i2cclk: i2cclk { compatible = "fixed-clock"; clock-frequency = <50000000>;
Add device tree bindings for AXS10X I2S PLL Clock driver. Signed-off-by: Jose Abreu <joabreu@synopsys.com> --- Changes v5 -> v6: * Added 'clocks' field This patch was only introduced in v5. arch/arc/boot/dts/axs10x_mb.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)